Related
Hi guys,
Hopefully someone can help,
I rooted my SGS2 a while back with Lightening ROM ver 1.5, being happy with it there was no need to update or change the ROM.
I thought I would try Cyanogenmod Mod however so far I have run into nothing but problems.
Trying to install the ROM via CWR results in a error E: Can't mount /sdcard
Trying to install through ROM manager results in failed to verify whole-file signature error.
A fix is to update my kernal/CWR version, here is where the issue is,
Windows does not detect my phone, as soon as I plug it it comes up unrecognized device USB device not usable.
This happens on both Windows and Linux, also a second PC, my wifes stock SGS2 phone works fine, connects and is detected by Odin.
Odin obviously will not detect my phone as windows does not install the driver ect, this also happens on Linux with Heimdall.
Has anyone run into this issue and been able to fix it?
Searching the forums I found the following threads however they were not much help.
http://forum.xda-developers.com/showthread.php?t=1339596&highlight=unrecognized+device
-
http://forum.xda-developers.com/showthread.php?t=1347106&highlight=unrecognized+device
Have you tried just flashing another kernel with ClockWorkMod. And have you tried to fix the permissions in the recovery?
Sent from my GT-I9100 using XDA App
Thanks for the above suggestions, It turned out to be the micro USB connection on my phone is faulty, if I connect the cable and hold it there ODIN will detect my phone and I have managed to flash it back to a stock ROM, however now I have another problem lol
The phone had my exchange emails synced and part of our IT policy is the phone needed to be encrypted, when the phone booted it still asks for the passcode which is fine but fails to decrypt the data and does not go any further, is there a way I can wipe the phone? wiping via CWR does not wipe the passcode or data.
I can't get into the phone so I can not factory reset that way, also I can not use the dialler codes as it won't work on the emergency call screen lol
Is there a way I can wipe via ODIN?
Thank you in advance!!!
pepper0481 said:
Thanks for the above suggestions, It turned out to be the micro USB connection on my phone is faulty, if I connect the cable and hold it there ODIN will detect my phone and I have managed to flash it back to a stock ROM, however now I have another problem lol
The phone had my exchange emails synced and part of our IT policy is the phone needed to be encrypted, when the phone booted it still asks for the passcode which is fine but fails to decrypt the data and does not go any further, is there a way I can wipe the phone? wiping via CWR does not wipe the passcode or data.
I can't get into the phone so I can not factory reset that way, also I can not use the dialler codes as it won't work on the emergency call screen lol
Is there a way I can wipe via ODIN?
Thank you in advance!!!
Click to expand...
Click to collapse
Go to this thread and pick a rom that says it wipes, there are quite a few, and flash it via odin.
Thank you very much
Hi, this is my first post here.
I have an unbranded international Galaxy S3 GT-I9300, Android 4.0.4
Kernel Version: 3.0.15-928452-user
[email protected] # 1
AP: I9300XXBLG8
CP: I9300XXLG8
CSC: I9300DBTBLG6
Long story, so I better put my questions first:
How can I flash a non-rooted device without using the USB port? SD-Card somehow?? Download mode is working at least...
and/or
How can I remove a Super SU system app from a apparently non-rooted device? (...which can not be rooted by using the USB port)
What happened:
I had rooted my device via this instuctions: http://forum.xda-developers.com/showthread.php?t=1695238
-> [03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager.
I used heimdall 1.3.1 on Ubuntu 12.04 via 'sudo heimdall flash --recovery recovery.img --cache cache.img'
All worked fine.
When the latest OTA firmware showed up a couple of days age (45,76MB) I tried it and it failed at 29%.
I remebered I had deleted some bloatware and thought maybe bringing it back would make the OTA work. Because I coudn't find Samsung Video Hub at some point I thought it would be the easiest to just factory reset, then run OTA and reroot.
I made lots of backups with Titanium Backup ROOT and I rolled back the BusyBox changes. I also reverted some later installed App to a non-system App again but am not sure which one, it was not Super SU, maybe the terminal app.
I then made a factory reset from within Android, on reboot CWM appeared and I choose the single one 'yes, delete all data'
After rebooting I tried to apply the OTA, still stuck at 29%
I realized that there ist still Super SU left as a system app and thought that might be the reason. However I decided to first give Kies a try with the update.
Installing Kies and connecting the phone (via my gf's Xperia Ray cable) went fine and it showed me the update. Because of memory shortage I had to move some things around, time passes, my gf sit down on her office chair and somehow remaind hanging on the usb cable,
my phone fell down. At first there doesn;t seem to be any problem, but after trying to reconnect to Kies, it didn;t work. I found the USB cable not working anymore, which means that no mobile is charged if connected via that cable now.
However I could not establish a connection from my phone to a computer again since then (original usb cable, another usb cable).
Not to Ubuntu (not recognized in heimdall), neither to any of 2 different windows 7 computers.
I know there is a lot of connection problems out there for S3, I cleaned the connector, and tried lots of stuff like not giving google account credentials after wipe, try different usb-ports, restart computer. Windows always says "Unknow device" now. Ubuntu, also heimdall 1.3.2 just says nothing.
Thats why I guess that somehow there is a hardware problem with the USB connector on the phone now. Charging and MHL is working. It also recognizes USB OTG cable, but not the things that I attach to it, it worked flawless before. USB Debugging on/off -> no difference. Also the option to switch MTP/PTP under Preferences->Storge->USB is gone (was there before my first reset)
As a side note, also WLAN is not working as before anymore, I always have to use a static IP to get connected to my FritzBox.
Because the ruins of SuperSU are still in the system I can not update. However the phone is not rooted as all apps I have tried claim. Reinstalling Super SU did not bring root back. It is there, it thinks the device is rooted but it is not. But I also can not get rid of Super SU.
So now, I can't use normal OTA update, can't reroot or use my backups, bc Titanium requires root.
I am stuck. Is there any way out? Or at least a direction?
Thank you for taking the time.
Silvio
einSelbst said:
Hi, this is my first post here.
I have an unbranded international Galaxy S3 GT-I9300, Android 4.0.4
Kernel Version: 3.0.15-928452-user
[email protected] # 1
AP: I9300XXBLG8
CP: I9300XXLG8
CSC: I9300DBTBLG6
Long story, so I better put my questions first:
How can I flash a non-rooted device without using the USB port? SD-Card somehow?? Download mode is working at least...
and/or
How can I remove a Super SU system app from a apparently non-rooted device? (...which can not be rooted by using the USB port)
What happened:
I had rooted my device via this instuctions: http://forum.xda-developers.com/showthread.php?t=1695238
-> [03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager.
I used heimdall 1.3.1 on Ubuntu 12.04 via 'sudo heimdall flash --recovery recovery.img --cache cache.img'
All worked fine.
When the latest OTA firmware showed up a couple of days age (45,76MB) I tried it and it failed at 29%.
I remebered I had deleted some bloatware and thought maybe bringing it back would make the OTA work. Because I coudn't find Samsung Video Hub at some point I thought it would be the easiest to just factory reset, then run OTA and reroot.
I made lots of backups with Titanium Backup ROOT and I rolled back the BusyBox changes. I also reverted some later installed App to a non-system App again but am not sure which one, it was not Super SU, maybe the terminal app.
I then made a factory reset from within Android, on reboot CWM appeared and I choose the single one 'yes, delete all data'
After rebooting I tried to apply the OTA, still stuck at 29%
I realized that there ist still Super SU left as a system app and thought that might be the reason. However I decided to first give Kies a try with the update.
Installing Kies and connecting the phone (via my gf's Xperia Ray cable) went fine and it showed me the update. Because of memory shortage I had to move some things around, time passes, my gf sit down on her office chair and somehow remaind hanging on the usb cable,
my phone fell down. At first there doesn;t seem to be any problem, but after trying to reconnect to Kies, it didn;t work. I found the USB cable not working anymore, which means that no mobile is charged if connected via that cable now.
However I could not establish a connection from my phone to a computer again since then (original usb cable, another usb cable).
Not to Ubuntu (not recognized in heimdall), neither to any of 2 different windows 7 computers.
I know there is a lot of connection problems out there for S3, I cleaned the connector, and tried lots of stuff like not giving google account credentials after wipe, try different usb-ports, restart computer. Windows always says "Unknow device" now. Ubuntu, also heimdall 1.3.2 just says nothing.
Thats why I guess that somehow there is a hardware problem with the USB connector on the phone now. Charging and MHL is working. It also recognizes USB OTG cable, but not the things that I attach to it, it worked flawless before. USB Debugging on/off -> no difference. Also the option to switch MTP/PTP under Preferences->Storge->USB is gone (was there before my first reset)
As a side note, also WLAN is not working as before anymore, I always have to use a static IP to get connected to my FritzBox.
Because the ruins of SuperSU are still in the system I can not update. However the phone is not rooted as all apps I have tried claim. Reinstalling Super SU did not bring root back. It is there, it thinks the device is rooted but it is not. But I also can not get rid of Super SU.
So now, I can't use normal OTA update, can't reroot or use my backups, bc Titanium requires root.
I am stuck. Is there any way out? Or at least a direction?
Thank you for taking the time.
Silvio
Click to expand...
Click to collapse
Hi. First of all you can have ota updates with kies even if you are rooted as long as you haveone of the official roms installed. Su does not disturb your ota updates through kies.You wont be able to have ota if you are rooted without kies.
R u sure you tried other usb cables and your connection failed? Try another one......You are saying you can charge....These cables have got a lot of thiny cables inside. Even if one is damaged you will have a problem.Try a new Samsung cable.
In the worst case if there is a hardware issue after the fall try kies wireless app so you connect to the pc without cable.
How do you connect to your FritzBox?
looks bad
Hi art,
thank you for your input!
art_arev said:
Hi. First of all you can have ota updates with kies even if you are rooted as long as you haveone of the official roms installed. Su does not disturb your ota updates through kies.You wont be able to have ota if you are rooted without kies. R u sure you tried other usb cables and your connection failed?
Click to expand...
Click to collapse
I tried with two different cables (Samsung, Lenovo) on 2 different computers. What makes me quite certain that there is an issue with the usb connector is, that USB OTG is not working anymore. No matter what I connect, the only thing it recognizes is the usb otg cable itself, but no stick/mouse/hub.
The cable which is broken now is the SE Xperia Ray cable from my gf's phone.
art_arev said:
In the worst case if there is a hardware issue after the fall try kies wireless app so you connect to the pc without cable. How do you connect to your FritzBox?
Click to expand...
Click to collapse
I tried it, it seems that the Kies Air App as well as Kies over WLAN (via Androids Preferences to connect to the Kies Desktop Application) does not support any firmware updating. I connect to the fritzbox via WLAN, it worked flawless before and I haven't changed anything.
It seems I have the following options:
1. find a way to reroot or flash the phone without using the usb connector (I read somewhere that it should be possible, but no further instructions were given)
2. find a way to remove the left overs from rooting (Super SU) -> that would at least open the possibility to apply OTAs
3. send it to samsung and hope they will repair it (problem is there are still traces of rooting on the phone)
4. try to repair the broken usb-connector myself
5. continue to try to somehow establish a connection via usb
Concerning option #1: I have unsuccesfully looked into the following options: unrevoked, UniversallAndroot, Z4root
All threads I read say it's not possible (e.g. http://forum.xda-developers.com/showthread.php?t=1870267&highlight=root+without+usb)
If I can't make any use of the leftovers of Super SU I think option 1+2 are dead ends.
I think I should try option 3 and if they deny, try option 4 or live with an unupdateable (?) unrooted phone (nah )
If there is SuperSU in system/app folder than it should work. Try to use build in options in SuperSU to reinstall. Also download and install busybox.
If root will be present and give you all needed partitions than you will be able to use Mobile Odin to flash stock firmware. But you also must remove binary counter information. This is imposible without root and/or working USB port.
There is a small chance that after flashing stock firmware USB port will be fully operational once again. I suppose it could be a software/driver issue, not hardware malfunction.
You can try to flash first with Everoot option enabled and after that check your USB connection. Of course you must transfer stock firmware to your phone. Do this via AirDroid or write it on external sd card on computer and put it into your phone. (copy this firmware to your internal sd card, it's better to flash from internal memory).
To resurrect your phone you need root or working USB.
i9.0.1.3k galaxy imperator
Thank you for keeping the hope alive SirKunon!
SirKunon said:
If there is SuperSU in system/app folder than it should work.
Click to expand...
Click to collapse
The App in system/app is called Superuser.apk (if that makes a difference), from inside the App I can see it is SuperSU v0.93.
There is an update available in the playstore which I can apply.
If I start any app which requires root (BusyBox, Titanium Backup, Root Explorer, Root Checker) I get the Superuser prompt to decide if I want to grant root access. Even if I choose "Yes" it never works.
Using the options inside SuperSU to reinstall fails (it does not close) as long as I don't have the update of SuperSU installed. If that is in place. It will close and left me with the former SuperSU version. Same for the option to "switch to another Superuser App" and "complete unroot".
If I try to remove the check from the box saying "activate Superuser" it tells me "Uninstallation failed"
SuperSU is there, Root access not. The only thing I can think of is do a factory reset once more (already did a couple) and try again.
It seems like there is a solution just behind the next door but I can't get through...
It's very strange, indeed.
Try hard reset service code:
*2767*3855# - hard reset
I don't have any other ideas. Service center will refuse fixing it if there are root traces. But you can try to find someone with jtag box to flash stock firmware or replace USB circuit on your own if you are sure that's faulty.
i9.0.1.3k galaxy imperator
Thanks for your help.
SirKunon said:
Try hard reset service code:
*2767*3855# - hard reset
Click to expand...
Click to collapse
Tried it, but situation remains unchanged, SuperSU is there, root access not, uninstall/reinstall it has no effect
OTA still hanging at 29%
no usb connection
no wireless connection unless I use a static ip
At least the phone is working as is...
Will probably send it to service center b/c I have nothing to loose. Maybe try to use my gf's insurance on beforehand.
If all fails, open the device or live with it, not sure.
einSelbst said:
Thanks for your help.
OTA still hanging at 29%
YES as it does .
Turn off signature verification via recovery may help.
Triangle Away
Mobile ODIN Pro and flash stock rom from external sd card
Then factory reset .
jje
Click to expand...
Click to collapse
hi jje,
JJEgan said:
Turn off signature verification via recovery may help.
Click to expand...
Click to collapse
but I don't have correctly working root access and only stock recovery.
Do you think it is still possible?
einSelbst said:
hi jje,
but I don't have correctly working root access and only stock recovery.
Do you think it is still possible?
Click to expand...
Click to collapse
No as we still have no way of flashing stock from phone without recovery .
it was just thinking aloud anyway .
What is required is a method to root from within the phone which we don't have .
jje
Happy Holidays Everyone!!!
Phone:
Tmobile T959 aka Samsung Vibrant
It is on stock Froyo 2.2
It has the 3E recovery.
I tried on 2 computers but I can NOT connect via USB it gives me USB malfunction error. The phone does charge. I can put it into download mode vie the 3 finger trick. When you connect it does give you the option to click the green Android icon Connect to USB. So it is talking to the computer, the usb is not totally dead.
Problem:
I need to root this phone. I can not use 1 click or anything else because I think there is a problem with the USB port. I can get files onto the phone via wifi or using the external sd card.
I tried using the update.zip file BUT because I am on the 3E recovery it will say signature failed. I can not run the install.bat to get it back to 2E recovery. I can not use ODIN because the Windows will not detect the phone properly.
What workaround can I use to root this phone? How would I use terminal on the phone?
HOW WOULD YOU ROOT THE PHONE IF YOUR USB PORT WAS "broken"?
THANKS for helping!
As far as I'm aware, you can't root your phone without the USB port working as most (if not all) root methods send their commands and files through ADB. Your pretty much stuck, unless your phone is under warranty. In that case, just go to your carrier and see if they'll give you a replacement device.
TheAndroidGod said:
As far as I'm aware, you can't root your phone without the USB port working as most (if not all) root methods send their commands and files through ADB. Your pretty much stuck, unless your phone is under warranty. In that case, just go to your carrier and see if they'll give you a replacement device.
Click to expand...
Click to collapse
It's out of warranty
I think there may be a way to do it via terminal emulator on the phone.
If this is possible, can someone please post how to do it.
anyone with a work around?
damn!
Am I stuck or does anyone have a way for me to root this phone without the using the USB connection (USB does charge, It will know when you connect to the pc for USB storage BUT windows will say not recognized. I tried it on 4 other pc's same results. I think something is wrong with the OS of the phone. I think the previous owner tried to update with Kies and it messed up the phone. The phone does boot and works.
droiduzr2 said:
damn!
Am I stuck or does anyone have a way for me to root this phone without the using the USB connection (USB does charge, It will know when you connect to the pc for USB storage BUT windows will say not recognized. I tried it on 4 other pc's same results. I think something is wrong with the OS of the phone. I think the previous owner tried to update with Kies and it messed up the phone. The phone does boot and works.
Click to expand...
Click to collapse
Try to install phone drivers for the computer i had to do that for my phone.
maikzen said:
Try to install phone drivers for the computer i had to do that for my phone.
Click to expand...
Click to collapse
I did all of that.
I think something is wrong with the phone's OS that is effecting the usb port.
How do I root this phone WITHOUT the USB port?
There has to be a way!
Can you determinate VID&PID of phone?
I can get into the device with airdroid and see the system files.
Which files do I need (or which apps) and where do I copy them manually to get it rooted?
droiduzr2 said:
I can get into the device with airdroid and see the system files.
Which files do I need (or which apps) and where do I copy them manually to get it rooted?
Click to expand...
Click to collapse
Is there not a device forum where you might could get some better information? My thinking is, a lot of the people (or most of the people) who may know some workarounds can probably help, but they don't check this section very often or at all.
Even if there's not a section for that model, I'm thinking there's probably one quite similar. Also a lot of times, a big portion of the userbase of one phone, will migrate to the same model when they upgrade.
Just throwing out some ideas in case that's helpful. My only advice on the problem itself is that I would look further into the driver issue. I've helped several people with very similar issues that we finally were able to correct.
Have you tried to ADB the device just to pull the serial? With USB debugging enabled. Have you installed the SDK and tried the naked drivers? There's some things to pursue possibly so you can have more information for the person who helps you get things straightened out.
Hi there. I am in a bit of a pickle! Right then about 3 weeks ago my phone had what I believe to be 'SDS' sudden death? It went off to be repaired/replaced & nearly 3 weeks later they sent me a 'new' phone! Now then, since I have had my phone back my computer won't recognize my phone. At first I thought it might be because I hadn't reactivated my sim card? I have just reactivated the sim card & still the computer won't recognize the phone?? It's quite maddening really as I need to root my phone to restore the phone (hopefully?) with Titanium? Unless I can restore my phone without having to root?? Can anyone help me out please?
Cheers Jay
1. check another cable;
2. uninstall KIES, install samsung drivers
3. turn off net on pc before connecting
4. check on another cable/pc
It is possible, that your "new" refurb phone returned with damaged connector.
spamtrash said:
1. check another cable;
2. uninstall KIES, install samsung drivers
3. turn off net on pc before connecting
4. check on another cable/pc
It is possible, that your "new" refurb phone returned with damaged connector.
Click to expand...
Click to collapse
Thanks for your reply.:good:
I forgot to add, my phone charges when connected to the pc but its not recognized by it!!!!
Cheers Jay
That is OK, follow the steps I provided.
It still CAN be charged, even if not recognized.
Hello,
I have a very big problem with my Samsung Galaxy S3 I9300.
The problem started when my battery ran down very very fast. I can use my phone for no longer than maybe 6 hours, and that is in stand by. If I want to charge my phone till it's completely full it might take two days on the charger as well, even when my phone is off. I tried to reset my phone to factory defaults, but that didn't fix the problem. I even bought a new battery, hoping that would solve the problem, but even no luck with that. The phone also becomes hot in the bottom. Now I wanted to bring it back to the store for warrenty but there lies the next problem, my phone is rooted.
I know it is possible to unroot the phone, and it's nog too hard to do. But every time I connect my phone with USB to my computer, my computer doesn't recognize it. I get the next error message "USB device not recognized". I tried different cables, I tried on an other computer, but still I get the same error. I also tried the S3 of a friend on my computer and with his phone I do get a connection. So I know there is nothing wrong with the drivers on my computer or something like that. There must be something wrong with my phone.
Now the problems won't stop here because there is even a third problem. Like I said before I have rooted my phone, but I can't use SuperUser. When I start SuperUser it says "The SU Binary needs to be updated. Continue?". Then when I press continue I get the message "Installation failed !". I can't use CWM as well. I wanted to use Triangle Away before bringing it back for warrenty, but I can't use it because I can't use SuperUser.
If some one would have an idea to unroot my phone without using USB so I can bring it in for warrenty. Or find a way to get my USB port running again, I think that would fix my problems.
I spend a few hours trying to fix these problems, but now I've come to a point I don't know what to do anymore, I hope anyone of you is willing to help me. I'll be for ever gratefull.
Grtz Nathan...
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Mord0rr said:
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Click to expand...
Click to collapse
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
droogje said:
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
Click to expand...
Click to collapse
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Mord0rr said:
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Click to expand...
Click to collapse
What exactly do you mean with hard reset? If you mean powering on with home button and volume up button pushed, and then select "wipe data/factory reset". Then yes, I tried that.
In setup I did check USB debugging. The thing is, when I power on with home button and volume down button, I enter download mode. But even in download mode my computer does not recognize my phone. I'm not sure, but I think the computer should.
I'm really stuck here :crying: