Related
Heys guy I just brought a S2 and it will arrive in 4 more days, been using a x10i and has been rooting and installing custom rom.
Now I'm new to S2, any thing in particular that I should know?
What is the Original Android Development and the Android Development difference?
Which is the some of the recommended ROM (no bugs, don't want MIUI) since there's really a lot custom rom compared to my previous x10i.
And one more question, what is the price of the HDTV Adapter? Can I connect S2 to a just HD ready tv with hdmi port? Or it must be a full HD tv?
gohwh1 said:
Now I'm new to S2, any thing in particular that I should know?
What is the Original Android Development and the Android Development difference?
Click to expand...
Click to collapse
Original android is supposed to be ASOP tweaks/roms whereäs the other has to do with touchwiz (I believe, but then again I've seen threads crossposted in the wrong section all the time). As for ROMs, I would personally stay far away from the ICS ROMs because they're nowhere near ready for daily use; there are many bugs and problems. When looking through firmwares there's no difference between XW and XX other than the countries that the ROM was released into, you can still flash these ROMs for use anywhere in the world. Personally I'm using XXKK5 because KL1 and above are developer builds with inconsistent framework changes. CheckROM KK5 is what I suggest for a stable ROM that works good. I also highly recommend JKay deluxe. CM7 is also an option, but I personally had problems with charging and was forced off the ROM. Your mileäge may vary. Also there are a ton of radio firmwares available: try out the latest revision and take note of your battery usage over a few days. Try others to see which works best for you. There's no real "golden" radio firmware. I personally use KH3 on AT&T in Phoenix.
http://forum.xda-developers.com/showthread.php?t=1154278&highlight=jkay+lockscreen
gohwh1 said:
Heys guy I just brought a S2 and it will arrive in 4 more days, been using a x10i and has been rooting and installing custom rom.
Now I'm new to S2, any thing in particular that I should know?
What is the Original Android Development and the Android Development difference?
Which is the some of the recommended ROM (no bugs, don't want MIUI) since there's really a lot custom rom compared to my previous x10i.
And one more question, what is the price of the HDTV Adapter? Can I connect S2 to a just HD ready tv with hdmi port? Or it must be a full HD tv?
Click to expand...
Click to collapse
If you wanna to try ICS ROMs, I will suggest you try simplistic. Now I use it as daily rom and I feel it's good enough.
And if you want to use HDTC Adapter , I suggest you stay in Stock Rom first. As I know, most custom roms don't support HDMI output.
There are no recommended roms. Try some out for yourself & see how you find them. A rom that works well for me will not necessarily give you the same experience.
for my opinion i suggest you flash cm7
but if like the intersting things,just flash cm7/andyX
rexxon said:
If you wanna to try ICS ROMs, I will suggest you try simplistic. Now I use it as daily rom and I feel it's good enough.
And if you want to use HDTC Adapter , I suggest you stay in Stock Rom first. As I know, most custom roms don't support HDMI output.
Click to expand...
Click to collapse
i'am using simplistic latest version, but i have problem with lockscreen, there aren't any lockscreen , from slide to face unlock, all are not work. I have tried to get someone to call to my phone but that only solves the problem of not-working-home-button. Any susgesttion for my problem?
tuan0saker said:
i'am using simplistic latest version, but i have problem with lockscreen, there aren't any lockscreen , from slide to face unlock, all are not work. I have tried to get someone to call to my phone but that only solves the problem of not-working-home-button. Any susgesttion for my problem?
Click to expand...
Click to collapse
Yes revert to stock rom and dont look back .
jje
tuan0saker said:
i'am using simplistic latest version, but i have problem with lockscreen, there aren't any lockscreen , from slide to face unlock, all are not work. I have tried to get someone to call to my phone but that only solves the problem of not-working-home-button. Any susgesttion for my problem?
Click to expand...
Click to collapse
Have you tried wiping and reinstalling the ROM
Ricey
wait for cm9, i've tried the devel vers and is very fast!
Just a suggestion
Hiya! Well, since you haven't got your phone yet, I would suggest you play around with your stock ROM first. The Original Android Development is for AOSP ROMs, ROMs that were created from scratch. The Android Development section is for custom tweaked versions of the stock ROM if I'm not mistaken.
I'm currently using Simplistic ICS but it has its fair share of bugs. You might wanna try insanity ii. It's a nice AOSP ROM. Never had FC's and it's amazingly fast and battery life is great. Good luck!
Hi bud, good choice of phone. If you want best standard ginger bread go to original development and flash intratech KK5 original Sammy ROM it's seamless!!!
Or, like me and you want to jump into ICS go to www.darkyrom.com and flash facieto's ICS LP2 THEN on top of that, upgrade to his LP6! Came out this week and it's seamless and crash free, all works!
tuan0saker said:
i'am using simplistic latest version, but i have problem with lockscreen, there aren't any lockscreen , from slide to face unlock, all are not work. I have tried to get someone to call to my phone but that only solves the problem of not-working-home-button. Any susgesttion for my problem?
Click to expand...
Click to collapse
try rewipe and reinstall ?
As I know, to get someone call your phone just solve the home-button issues.
I never met lock screen problem. I am using RC5 + Update 2 , try this combination. Also remember , don't directly flash update package after installation. Following these steps: Install RC5 - (reboot) - Install Update 1 - (reboot) - Install Update 2 - (reboot) - Call from others phone to unlock home button.
Hope this help. Good Luck , bro.
after you have root download k tool right away and backup efs, it could savr your ass some day
Sent from my GT-I9100 using XDA App
Is it only the stock rom support HDMI output, all custom rom doesn't support?
Or is there any custom rom that is based on stock rom and also does support HDMI output?
Is this the latest method to root S2? http://forum.xda-developers.com/showthread.php?t=1103399
And how long do i have to charge S2 for the very first time?
gohwh1 said:
Is it only the stock rom support HDMI output, all custom rom doesn't support?
Click to expand...
Click to collapse
Stock ROM, or any ROM based on stock. It needs the Samsung framework. So nothing that is pure AOSP (such as CM or MIUI) will work. If you want a ROM that is as close to AOSP as possible that still supports the MHL adapter, try GingerMOD.
gohwh1 said:
Or is there any custom rom that is based on stock rom and also does support HDMI output?
Click to expand...
Click to collapse
See above, but there are many others. I don't personally use any of them (I'm still on stock, rooted, modded myself), so I can't recommend one above any others. It's a personal preference anyways, so you should just try some and decide yourself.
gohwh1 said:
Is this the latest method to root S2? http://forum.xda-developers.com/showthread.php?t=1103399
Click to expand...
Click to collapse
It is one of many methods, and one that I can personally vouch that it works, as I've used it before. Just use the correct insecure kernel for your build.
gohwh1 said:
And how long do i have to charge S2 for the very first time?
Click to expand...
Click to collapse
..... Til it hits 100%?
ctomgee said:
Stock ROM, or any ROM based on stock. It needs the Samsung framework. So nothing that is pure AOSP (such as CM or MIUI) will work. If you want a ROM that is as close to AOSP as possible that still supports the MHL adapter, try GingerMOD.
See above, but there are many others. I don't personally use any of them (I'm still on stock, rooted, modded myself), so I can't recommend one above any others. It's a personal preference anyways, so you should just try some and decide yourself.
It is one of many methods, and one that I can personally vouch that it works, as I've used it before. Just use the correct insecure kernel for your build.
..... Til it hits 100%?
Click to expand...
Click to collapse
Thanks what I'm asking is I thought I have to charge 8hours or 10hours on first charge or it's not required?
If I stay stock, and install custom kernel will it still support hdmi to tv?
Which is the most stable kernel that also include undervolting? You recommended insecure kernel, what about the others three?
[KERNEL] SpeedMod SGS2 [K2-20 CWM5 CIFS ROOT]
http://forum.xda-developers.com/showthread.php?t=1182498&highlight=root
[KERNEL] Insecure Kernels for use with rooting
http://forum.xda-developers.com/showthread.php?t=1101671&highlight=kernel
[KERNEL] SiyahKernel v2.6.11 - "One kernel to rule them all" (SAMMY&AOSP ROMs)
http://forum.xda-developers.com/showthread.php?t=1263838&highlight=root
[KERNEL] Phenomenal [3.0]
http://forum.xda-developers.com/showthread.php?t=1351191&highlight=kernel
New to s2
Hi
I have come from htc and find the s2 completely different. Managed to upgrade the firmware from 2.3.4 to 2.3.6 using xxKL1 and must say everything run smoothly . Was looking to root using superoneclick and odin . But when i download a rooted kernel and extract the zip , i end up with another zip file, extract that and i end up with a Zimage file .is this the file i am supposed to load into odin.
Bob
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Thanks
this is the thread that i followed to update Firmware . Think that i have the right downloads now .Could you tell me ,or point me in the right direction how to install a apk keyboard file on to my S2
Bob
bob277845 said:
Thanks
this is the thread that i followed to update Firmware . Think that i have the right downloads now .Could you tell me ,or point me in the right direction how to install a apk keyboard file on to my S2
Bob
Click to expand...
Click to collapse
Copy apk to phone .
Open my files on phone locate apk and open it and install .
jje
Hi,
I have BT problems. While connected to my car stereo (Sony MEX-BT3900U) for a while, the phone reboots itself. After reboot the phone doesn't automatically connects to car stereo, I have to manually reconnect. I'm using the Official ICS rom (I9100DXLP7).
This occurs during audio stream & call.
Tnx for any sugestions.
Phil
Root you phone and change you kernel
tnx
Tnx for the quick reply, will try it tonight...
078gregory said:
Root you phone and change you kernel
Click to expand...
Click to collapse
I'm aware this is a noob question, but I think don't really grasp the complete flashing process:
The only thing I did was flash ROM I9100DXLP7 with Odin. I wasn't aware the kernel had to be updated manually.
Should I root first using CF-Root v5.4 LPQ, and then flash the Separate Kernel: Download (.TAR)? Both files are listed:
http://forum.xda-developers.com/showthread.php?t=1544487
tnx for your help...
I have the same problem with my S2 and car stereo (Sony MEX-BT2950) had no luck after trying multiple stock / custom ROMS and even combinations of different kernels and modems. nothing worked. the only way this is going to work is to roll back to Gingerbread
hamz22 said:
I have the same problem with my S2 and car stereo (Sony MEX-BT2950) had no luck after trying multiple stock / custom ROMS and even combinations of different kernels and modems. nothing worked. the only way this is going to work is to roll back to Gingerbread
Click to expand...
Click to collapse
To be honest, I find your reply rather depressing...but hey, it seems you are right...I rooted, installed the kernel....nothing changed..
thanks for the info..
hamz22 said:
I have the same problem with my S2 and car stereo (Sony MEX-BT2950) had no luck after trying multiple stock / custom ROMS and even combinations of different kernels and modems. nothing worked. the only way this is going to work is to roll back to Gingerbread
Click to expand...
Click to collapse
I guess I'm going back to the good old 2.3.5....
philz03 said:
I guess I'm going back to the good old 2.3.5....
Click to expand...
Click to collapse
I forgot to mention that this bug has happened on every ICS build i have tried right up to XXLPQ. I have just noticed there have been two releases since then, XWLP2 being the latest. i'm gonna try it and will report back with the results.
philz03 said:
I'm aware this is a noob question, but I think don't really grasp the complete flashing process:
The only thing I did was flash ROM I9100DXLP7 with Odin. I wasn't aware the kernel had to be updated manually.
It does not its part of the firmware and root wont fix the problem either .
Although a custom kernel with a built in fix for the problem could be the answer .
jje
Click to expand...
Click to collapse
JJEgan said:
Although a custom kernel with a built in fix for the problem could be the answer .
jje
Click to expand...
Click to collapse
good call. i'm downloading LP2 as we speak and if this does not fix the problem then I'll give one of Siyah's new beta kernels a shot as well.
EDIT: I have installed LP2 and Bluetooth streaming to the car stereo still results in a reboot after approx 15 minutes. Flashed Siyah Kernel 3.0b6 and that didn't help either. back to GB i guess.
Good news everyone!!!!!! I have found the fix! Just load following kernel (using Odin): SiyahKernel v3.0.1 (Posted on April 8, 2012). this kernel can be found at http://www.gokhanmoral.com/ . All credit go to the devolpper of the kernel.
Cheers,
Phil
philz03 said:
Good news everyone!!!!!! I have found the fix! Just load following kernel (using Odin): SiyahKernel v3.0.1 (Posted on April 8, 2012). this kernel can be found at http://www.gokhanmoral.com/ . All credit go to the devolpper of the kernel.
Cheers,
Phil
Click to expand...
Click to collapse
Sorry but it isn't a solution. I have installed the last siyah kernel, 3.1rc6 and my phone keep on rebooting every about 15 minutes if it paired with my sony car audio system.
Has anyone found a solution?
I have the same problem. I'm using Wlp8
DULP9 and its still broken. god this sucks. im tired of having to use the slow and battery hungry GNex cos it's bluetooth, of course, works fine with my car stereo
SOLVED!!!! well for me the fix was using a CM9 based ROM. F1 Galaxy Nexus to be exact. I was able to stream via bluetooth for well over 90 minutes without any problems whatsoever. I hope this will help someone out there.
From what I can tell from some thread I found somewhere else using google, it seems that any custom rom running 4.0.4 works fine, seems to be somehow related to Samsungs 4.0.3 rom and any roms based on it (not sure about 4.0.3 roms NOT based on the Samsung rom).
jamieridler said:
From what I can tell from some thread I found somewhere else using google, it seems that any custom rom running 4.0.4 works fine, seems to be somehow related to Samsungs 4.0.3 rom and any roms based on it (not sure about 4.0.3 roms NOT based on the Samsung rom).
Click to expand...
Click to collapse
According to me, you are completely right.
Inviato dal mio GT-I9100 usando Tapatalk
My 2c.
I am having the same issues. With the ROM XXLPW the problem stopped, but this ROM is not smooth and battery friendly as XWLPD that I was using before.
Today I flashed XWLPG and guess what? The reboots came back!
Where is the Bluetooth related files? Maybe using the XXLPW in the XWLPG or XWLPD we can have a trouble free ROM and smooth at the same time.
delca85 said:
According to me, you are completely right.
Inviato dal mio GT-I9100 usando Tapatalk
Click to expand...
Click to collapse
Hi delca ! i am italian too!
have you find a solution for streaming bluetooth with our sony stereo?
thanks
marcello
marci4na said:
Hi delca ! i am italian too!
have you find a solution for streaming bluetooth with our sony stereo?
thanks
marcello
Click to expand...
Click to collapse
Marcello there are 3 solutions
1. given that XWLPM firmware is based on Android 4.0.4 this *might* solve the problem (i no longer have a GS2 to verify) Beware! I *think* this rom may have the dreaded "brick bug" that could permanently damage your phone. Do NOT install CWM recovery with this rom!!!!
2. install a ROM based on CynaogenMod 9 or AOKP. both are also based on Android 4.0.4
3. If you must stay on a Samsung stock ROM then downgrade to Gingerbread.
I'm pretty sure nothing else would work. I sure hope the Galaxy S3 stock roms dont have this bug as im really considering getting one this week
Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
why are you migrating yourself from no problems to problems,
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
amodj said:
Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
Click to expand...
Click to collapse
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
engloa said:
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Oh that is sad ! Speedmod was the best kernel that I had on GB. That is why I wanted to try out the ICS version.
zaheedahmed said:
why are you migrating yourself from no problems to problems,
Click to expand...
Click to collapse
Because I haven't found a sweet spot yet. That is why I am experimenting with different kernels.
zaheedahmed said:
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
Click to expand...
Click to collapse
Will post in the speedmod thread. Just wanted to know if this was a generic problem with all kernels or just speedmod specific.
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
thracemerin said:
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
Click to expand...
Click to collapse
Whoops ! missed that ! Thanks a lot
Hi! I'm in a rooted phone, used Liquid Perfection way, flashed insecure kernel and then secure back, then i found siyah kernel, it looks cool!!! So i did flash it, everything works OK, but when you try to use the camera it will take the photo but you can't see where you are shoting, cause the screen truns black!
So I did flash back the secure kernel and camera work OK, takes photos and you can see in the screen.
It's a bug in the siyah kernel (flashed the last release) or it's because my rom? (Russian LP8 LQ6 Samsung stock 4.0.4) Or becuse i'm too noob?
Thanks!
iskysam said:
Hi! I'm in a rooted phone, used Liquid Perfection way, flashed insecure kernel and then secure back, then i found siyah kernel, it looks cool!!! So i did flash it, everything works OK, but when you try to use the camera it will take the photo but you can't see where you are shoting, cause the screen truns black!
So I did flash back the secure kernel and camera work OK, takes photos and you can see in the screen.
It's a bug in the siyah kernel (flashed the last release) or it's because my rom? (Russian LP8 LQ6 Samsung stock 4.0.4) Or becuse i'm too noob?
Thanks!
Click to expand...
Click to collapse
Nothing wrong with SIYAH KERNEL. i have using siyah since v3.3.2 till v3.5.2 all my 4 camera app work like a charm
HIT THANKS IF I HELPED
iskysam said:
Hi! I'm in a rooted phone, used Liquid Perfection way, flashed insecure kernel and then secure back, then i found siyah kernel, it looks cool!!! So i did flash it, everything works OK, but when you try to use the camera it will take the photo but you can't see where you are shoting, cause the screen truns black!
So I did flash back the secure kernel and camera work OK, takes photos and you can see in the screen.
It's a bug in the siyah kernel (flashed the last release) or it's because my rom? (Russian LP8 LQ6 Samsung stock 4.0.4) Or becuse i'm too noob?
Thanks!
Click to expand...
Click to collapse
I don't know about the method you used, flashing Siyah gives you root also. If you could flash back your stock kernel and remove the Superuser application (really I'd remove the binary but I haven't a clue how to do that) then flash Siyah Kernel so you'll gain back root access.
Thinking now it maybe a firmware issue, it just may affect 4.0.4.
narsimdamha said:
Nothing wrong with SIYAH KERNEL. i have using siyah since v3.3.2 till v3.5.2 all my 4 camera app work like a charm
HIT THANKS IF I HELPED
Click to expand...
Click to collapse
How did you help? It's people like you just want to fill up the thanks bar without any substance in your mind and posts.
Sent from my GT-I9100 using Tapatalk 2
It's FW bug. Flash 4.0.3.
It's a bug with siyah on 4.0.4 stock ROMs. I had same issue there is an easy fix which is a simple zip flash in this forum which I can confirm works. I think it's in the original development thread. Next siyah update will fix this bug. I also tried Galaxian kernel which is a 4.0.4 kernel and it never had the camera bug.
Sent from my GT-I9100 using xda app-developers app
nicholas1520 said:
I don't know about the method you used, flashing Siyah gives you root also. If you could flash back your stock kernel and remove the Superuser application (really I'd remove the binary but I haven't a clue how to do that) then flash Siyah Kernel so you'll gain back root access.
Thinking now it maybe a firmware issue, it just may affect 4.0.4.
How did you help? It's people like you just want to fill up the thanks bar without any substance in your mind and posts.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
NO OFFENSE. I THINK I NEVER HURT ANYBODY HERE ANYWAY I M SORRY:angel:
Well done Handsy,I had the same problem and its fixed now after your help.The fix is by a guy called Tungstwenty.
For the other guy-do some bloody research before you open you trap.
Sent from my GT-I9100
Look here http://forum.xda-developers.com/showthread.php?t=1772931
Sent from my GT-I9100 powered by TugaPower
Rom: XWLPO (4.0.4)
Kernel: Siyha 3.5.2
Hi i am running RR 2.6.1 not running siyah kernel currently. However im wanting to flash siyah kernel so I can dual boot running a rom that I can use a MHL cable with.
Couple of questions,
Which version of Siyah Kernel should I flash with RR 2.6.1? Will the latest version be OK?
Which ROM is recommended for using MHL HMDI with my S2? Is stock the best option here?
jackURbody said:
Hi i am running RR 2.6.1 not running siyah kernel currently. However im wanting to flash siyah kernel so I can dual boot running a rom that I can use a MHL cable with.
Couple of questions,
Which version of Siyah Kernel should I flash with RR 2.6.1? Will the latest version be OK?
Which ROM is recommended for using MHL HMDI with my S2? Is stock the best option here?
Click to expand...
Click to collapse
The latest siyah wouldn't work, I believe. You'd need siyah 4.1.5 or lower to run RR 2.6
As far as MHL is concerned, your best bet would be a stock rom. ICS 4.0.3 is preferable.
HAXTREME said:
The latest siyah wouldn't work, I believe. You'd need siyah 4.1.5 or lower to run RR 2.6
As far as MHL is concerned, your best bet would be a stock rom. ICS 4.0.3 is preferable.
Click to expand...
Click to collapse
Thanks, sounds good, I will flash 4.1.5 tonight.
Why does this kernel I stuck my phone ?
poshtvane said:
Why does this kernel I stuck my phone ?
Click to expand...
Click to collapse
Probably coz you're using a ROM which has the new Mali drivers. For that use siyah 5.0
Sent from my GT-I9100 using xda app-developers app
I ended up installing wanamlite as my secondary rom. MHL is working perfectly. Cheers.