Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Thx I will try it soon. But how come I can flash ics kp8 and lp2 roms
Are you using the new bootloader then?
That one Im not sure of but I have read on other threads that people have had to "repartition" their phones to be able to flash back from ICS.Not bieng on ICS I dont see why you cant as the Omega ROM was just themed.Im on the latest Omega and its 2.3.6. so 100% positive it wasnt ICS.Also Try stupid things like another com port.Happened to me once.The one I was using when I had an i9000 stopped letting me flash it via Odin when it reached the same stage every time I tried.Dont Know why.Just had to change ports.Try everything:
1.Full wipe and flash.....If that dont work then...
2.Flash F/W that works then change kernel and flash old bootloader(as mentioned above)never know,might work.
http://www.multiupload.com/LQQBRQVJUD
Flash it in PDA in Odin.
ALso you could try a program called "Fus Downloader"
http://fus.nanzen.se/
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
KevandLynds said:
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
Click to expand...
Click to collapse
True.Same thing happened to my mate.He has an i9000 and Odin stopped flashing his phone but only if he used a PIT file so I gave him my i9100 cable and it started flashing his phone again with PIT file selected.Weird how things work sometimes for no real reason.Anyway Nandroid backups are always a good call.could have saved some trouble the this case.Ive got a Nandroid backup on my phone and copied to DropBox thats months old but it would get me out of trouble if this sort of thing happened to me Even though its old as.Gotta have that saftey net.
zabihjan said:
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Click to expand...
Click to collapse
Try flashing a Gignerbread bootloader using Odin
happel92 said:
Try flashing a Gignerbread bootloader using Odin
Click to expand...
Click to collapse
I will try it soon thx
Sent from my GT-I9100 using Tapatalk
JJEgan said:
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
Tried dont work i can only flash ics roms
Sent from my GT-I9100 using Tapatalk
pulser_g2 said:
Are you using the new bootloader then?
Click to expand...
Click to collapse
Old bootloader as i can use my jig to clear counts
Sent from my GT-I9100 using Tapatalk
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Didnt work
Sent from my GT-I9100 using Tapatalk
Mate,thats a strange one alright.
Any luck yet.I was thinking that you might have to look for a package that has the older 4 file flash with pit.Its possible that maybe you need to repartition your device.Might be hard to find thought.
iv been having a few issues as of late with my s2 so decided id just backup my numbers and media and wipe and start again, but when i do a factory reset, it shows an error mounting the sdcard/.android_secure
and then it skips it, can anyone tell me how to fix this problem so i can start a fresh with a nice clean and empty galaxy
What system do you have? ics or ginbread...?
Question = wrong forum.
....................................
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
my apologies, i havent used the forum much as the phone has been fine for about 6 months, its now on checkroms v6 which i managed to flash onto it with a bit of fiddling, thinking that may solve some of my issues but it didnt. thats when i noticed this error when doing a few resets.
JJEgan, gonna follow your steps now buddy, thanks and fingers crossed
its a no go, it wont let me format or mount the sdcard
try factory reset from phone menu,
try another kernel to get another version of CWM, eg: Siyah
hiya zac, well i have the phone in download mode connected to odin, im using the link in your sig, and downloading the stock firmare and kernal, will it matter if i didnt wipe the sdcard before flashing these two items with odin? surely i can do it after?
upto you to try.....
cant guarantee since dont know what weird problem has got with your SD card which
dont allow you to wipe,
you can also try flashing another custom kernel first,
When you flash a stock firmware it already contains a Kernel, no need to flash seperately..
any chance to a quick link to a kernal to try and a guide!
its been a while since iv done this! haha
which rom are you currently on?? ICS or GB
checkrom v6 i do believe
GB CWM flash : http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14-CWM.zip
Checkrom is GB version,
but makesure, from settings/about phone
i will bud, and i flash that kernal, with odin?
no this is CWM flashable, put on SDcard, and flash from CWM,
top man, off to have a go now
if CWM flash fails, you can try from ODIN
ODIN flash :http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14.tar
select the file from PDA of Odin,
Pugme said:
its a no go, it wont let me format or mount the sdcard
Click to expand...
Click to collapse
Unless you have a external sdcard, this problem is self explanatory!
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
tried factory reset?
use your backup in recovery
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
You have to do a data wipe in recovery to fix that.
Do a full wipe. Factory reset + wipe cache, dalvik and system
Sent from my GT-I9300 using xda app-developers app
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
First step would be to do a full wipe I.e. data+cache+dalvik..if it does not work..then wipe system partition..be careful as this step will erase everything from your internal memory..
PS. Coming from leaked jb..install stock ics first via odin..reboot check if wifi works..if yes then go ahead and flash aosp based roms.. otherwise you might face wifi issues..
Sent from my GT-I9300 using xda app-developers app
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
Go to ClockWorkMod:
1- Turn off Your device
2- Press and hold this combination: up volume - menu button - power button
3- When you're in Clockwork mod search and choose factory reset4
4- Then confirm factory reset and use Pc Odin and flash a new ROM in Download Mode
Hope this helped
PS: Factory reset will erase everything So backup ur files, but in your case it's not necessary knowing that it's stuck in bootloader
Download mode for PC ODIN flash:
-turn off you device
-Download Mode: Press and hold :down volume button - menu button - power button
-After that connect ur device via USB to your PC
-choose the Stock Rom from Odin "DISABLE or UNCHECK REPARTITION"and and flash your device it'll take like 3mins or less to flash on SGS3
nhariamine said:
Go to ClockWorkMod:
1- Turn off Your device
2- Press and hold this combination: up volume - menu button - power button
3- When you're in Clockwork mod search and choose factory reset4
4- Then confirm factory reset and use Pc Odin and flash a new ROM in Download Mode
Hope this helped
PS: Factory reset will erase everything So backup ur files, but in your case it's not necessary knowing that it's stuck in bootloader
Download mode for PC ODIN flash:
-turn off you device
-Download Mode: Press and hold :down volume button - menu button - power button
-After that connect ur device via USB to your PC
-choose the Stock Rom from Odin "DISABLE or UNCHECK REPARTITION"and and flash your device it'll take like 3mins or less to flash on SGS3
Click to expand...
Click to collapse
This advice does not really help in my view .
Why factory reset then flash via Odin = wipe twice .
Odin does not have a stock rom . That may confuse the OP . >?> Its flash a stock rom via Odin .
jje
In my opinion the best option to restore stock firmware (and partition layout) is flashing three-file firmware by Odin with repartition option (and of course mx.pit). It will make all needed wipes after flash in recovery after selfreboot. All needed commands are set in executable script which is running after flashing. After that you may flash newest firmware by FOTA, Kies or Odin, as you wish.
All you need is download a correct for Your location version with separate PDA, CSC and MODEM and mx.pit.
Of course there is always a danger related to repartition so You need to do it with caution.
You DON'T need to flash the pit file unless you've somehow screwed up your partitions and have corrupted them. Flashing a pit file is one of the fastest ways to brick your phone if you don't know what you're doing and use the wrong one...
Just put the full stock update file in PDA and flash as it has the pit repartition in the file already. However, DON'T tick the repartition box...
watsa said:
tried factory reset?
Click to expand...
Click to collapse
zoot1 said:
First step would be to do a full wipe I.e. data+cache+dalvik..if it does not work..then wipe system partition..be careful as this step will erase everything from your internal memory..
PS. Coming from leaked jb..install stock ics first via odin..reboot check if wifi works..if yes then go ahead and flash aosp based roms.. otherwise you might face wifi issues..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
ultramag69 said:
You DON'T need to flash the pit file unless you've somehow screwed up your partitions and have corrupted them. Flashing a pit file is one of the fastest ways to brick your phone if you don't know what you're doing and use the wrong one...
Just put the full stock update file in PDA and flash as it has the pit repartition in the file already. However, DON'T tick the repartition box...
Click to expand...
Click to collapse
tryied a factory reset and now restoring another rom to see if it works... the main issue is that it keep at the samsung logo after reboot. ok JB, any attempt of put the ccw makes the phone stuck on the boop on a vibrate loop (1 long/3 shorts)
Hi, my android device got malware ( some apps) that cannot be remove even after factory reset or hard reset.. so.. how can i remove these apps?
Thanks.
Do wipe cache and full factory reset get in download mode and flash with firmware and again do wipe cache and factory rest if u have problem with samsung phones, if replica or china made than need to flash with full firmware.
Here it goes.You should backup important files first. Make sure to handpick the files instead of coying the whole internal storage/sdcard. Don't copy suspicious files. Now, do a firmware flash (make sure that the firmware is correct and the android versions are either same or newer) and wipe Both internal and external storage ( portable sdcard). That should be it.
Edit: If no firmware are available, then you can try a factory reset with full wipe.
Broadcasted from Zeta Reticuli
asadnow2k said:
Do wipe cache and full factory reset get in download mode and flash with firmware and again do wipe cache and factory rest if u have problem with samsung phones, if replica or china made than need to flash with full firmware.
Click to expand...
Click to collapse
1. I already do the wipe cache and full factory reset.
2. I havent flash the firmware.
So.. how to flash the device with stock firmware ? Im using samsung device.
with odin you can flash with stock firmware. what device u got so i can try to find u exect link to firmware
Gravemind2015 said:
Here it goes.You should backup important files first. Make sure to handpick the files instead of coying the whole internal storage/sdcard. Don't copy suspicious files. Now, do a firmware flash (make sure that the firmware is correct and the android versions are either same or newer) and wipe Both internal and external storage ( portable sdcard). That should be it.
Edit: If no firmware are available, then you can try a factory reset with full wipe.
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
I already do the factory reset with full wipe but i havent do the firmware flash.. so how can i do the firmware flash with stock firmware. Im using samsung galaxy note gt n7000
do tell me module so i can find u firmware. and flashing mathod
asadnow2k said:
with odin you can flash with stock firmware. what device u got so i can try to find u exect link to firmware
Click to expand...
Click to collapse
samsung gt n7000
asadnow2k said:
do tell me module so i can find u firmware. and flashing mathod
Click to expand...
Click to collapse
What u mean by module? sorry im noob
like g920t / g935p /g530h
asadnow2k said:
like g920t / g935p /g530h
Click to expand...
Click to collapse
I go to 'about device' in setting.. and i see model number : GT-N7000
https://www.androidfilehost.com/?fid=24438995911969739
http://dl.sammobile.com/Odin3-v3.11.1.zip
http://www.sammobile.com/firmwares/confirm/31081/N7000XXLTD_N7000PLSLT5_PLS/
download these 3 files
And then?