Use packet data turns off - AT&T Samsung Galaxy Note I717

I'm on stock Bell Canada ICS. Ever since the upgrade I have to keep turning on the Use packet Data setting once or twice a day. It just turns off and I can't access data without going into setting and manually turning it back on.
Anyone know how to get it to stay on?

Did you upgrade through kies? I've seen users have many different issues when upgrading that way.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

kinghorsey said:
Did you upgrade through kies? I've seen users have many different issues when upgrading that way.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
No, it came in over the air.

RE-update again using Kies ?
It may not hurt......
It seems folks have different issues regardless of the method....and i think a re-do may solve a few using the secondary method...IMHO

Or if you have CWM just flash the Bell modem. If not, push it using Odin3.

Can I re-update without first downgrading to 2.3? If so, how would I go about down grading?
No CWM, do I need to be rooted to use ODIN? I've used it on my old phone, but not this one.

Root not needed to push modems with Odin3.
Bell CWM zip:
http://d-h.st/clP
To use with Odin3 download zip and unzip it. Use the modem.bin or the mdm.bin in the phone slot in Odin3. Nothing else should have checks in the boxes.

I too have noticed this issue since the ICS update (which sucks btw)
It seems that switching from LTE to 4g to HSPA+ is the problem, can't really say that this is the actual problem but I have noticed that every time I'm in an undecided zone, I lose all signal.
My updated from GB to ICS on the release date.
My GN was reset to original factory GB, then updated to ICS via OTA and I still get this problem, so I'm not so sure its a modem issue.
BTW, my GN was not rooted, until last night...let's see what will happen next

kyrotech said:
I too have noticed this issue since the ICS update (which sucks btw)
It seems that switching from LTE to 4g to HSPA+ is the problem, can't really say that this is the actual problem but I have noticed that every time I'm in an undecided zone, I lose all signal.
My updated from GB to ICS on the release date.
My GN was reset to original factory GB, then updated to ICS via OTA and I still get this problem, so I'm not so sure its a modem issue.
BTW, my GN was not rooted, until last night...let's see what will happen next
Click to expand...
Click to collapse
I'm on cm9 with the bell modem and the phone loses signal whenever it switches from hspa to lte. It also takes a couple minutes for the phone to find a lte signal. When I was on UCLE2 it found the lte signal right away and never had any hiccups so I'm guessing its the issue with the modem itself.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

kyrotech said:
My GN was reset to original factory GB, then updated to ICS via OTA and I still get this problem, so I'm not so sure its a modem issue.
Click to expand...
Click to collapse
In my opinion, any way you look at it, its a modem issue. The new modem with the ICS update could be no improvement over the modem with the stock Gingerbread.
But now that you are rooted, maybe you will flash other roms and see if there is any improvement for you. The at&t LF6 rom and modem is very stable and most of the custom roms are built on them. Enjoy the experiment.

Related

[Q] Best modem for AT&T?

Just wondering what the best modem is for ATT and some other question about modems.
Right now im running wanam lite kj1 5.6 with ICS domination theme. I have KI4 modem flashed because i was on villanrom which i might go back to because it has better battery life.
Does the modem affect the ROM in anyway? just wondering because most roms have a modem prefix to them on the development forum. or is there a certain modem better in every senario?
Thanks for your help!
I too would like to know the best modem for at&t. My current one (Current official uk unbranded) seems to completely lose signal after a phone call or just randomly, it quickly reestablishes connection but still annoying.
Sent from my GT-I9100
bencozzy said:
Have you tried Odin to push the uckj4 leak modem for the i777? All the 9100 modems I e used on my i777 turn the radio off when a voice call occurs then reconnects after call fails.
Click to expand...
Click to collapse
Maybe i9100 modems just dont work on i777 and vice versa. Hopefully someone could correct me but i guess its worth a try. Is it better to flash modems via odin then CMW? and another question whats the difference between a modem and a kernel? I know on some level the kernel has something to do with the firmware and the modem has to do with the baseband, but im still unsure about the difference.
Thanks again!
Also have the same problem. The 3g lost the signal randomly. my baseband is "UNKNOWN" . Any idea?
Sent from my GT-I9100 using XDA App
bencozzy said:
Have you tried Odin to push the uckj4 leak modem for the i777? All the 9100 modems I e used on my i777 turn the radio off when a voice call occurs then reconnects after call fails.
Click to expand...
Click to collapse
I'm assuming these guys are running real I9100s on AT&T (otherwise they're in the wrong forum) - pushing an I777 modem will likely completely break them.
Entropy512 said:
I'm assuming these guys are running real I9100s on AT&T (otherwise they're in the wrong forum) - pushing an I777 modem will likely completely break them.
Click to expand...
Click to collapse
Yes! Thank you for clarifying.
ODIN Vs. CWM
platinumyahoo said:
Maybe i9100 modems just dont work on i777 and vice versa. Hopefully someone could correct me but i guess its worth a try. Is it better to flash modems via odin then CMW? and another question whats the difference between a modem and a kernel? I know on some level the kernel has something to do with the firmware and the modem has to do with the baseband, but im still unsure about the difference.
Thanks again!
Click to expand...
Click to collapse
Hey, did you ever find out the answer to this question?
I want to know what's the difference between flashing with Odin and CMW, is one do more than the other?
yea.. anyone?
platinumyahoo said:
Just wondering what the best modem is for ATT and some other question about modems.
Right now im running wanam lite kj1 5.6 with ICS domination theme. I have KI4 modem flashed because i was on villanrom which i might go back to because it has better battery life.
Does the modem affect the ROM in anyway? just wondering because most roms have a modem prefix to them on the development forum. or is there a certain modem better in every senario?
Thanks for your help!
Click to expand...
Click to collapse
I'm on baseband XXKI3, running my I9100 on AT&T... don't have any issues. No call drops, no signal drops after calls are done, etc. Works fine.
ctomgee said:
I'm on baseband XXKI3, running my I9100 on AT&T... don't have any issues. No call drops, no signal drops after calls are done, etc. Works fine.
Click to expand...
Click to collapse
Funny - I have XXKI3 as well on AT&T and periodically I get drops and it's almost always just as syncing is initiated.
@robsw
I noticed you are located in Chicago. the problem could just be that AT&T sucks horribly in the downtown area. specifically anywhere near River North or the loop. I have tried just about every available modem and I still have data connection issues in those areas. Even friends with iPhones comain about poor data in those areas.
I use the ki1 modem on my I9100 on at&t in louisiana. Ive found this modem gives me the best signal in my area. I did use ki4 for a while but i kept getting dropped calls inside my house. Now with ki1 no more dropped calls
Sent from my GT-I9100 using XDA App
I live in Champaign,IL. Data drop/hang issue always there on KG2, KI3, KI4 modem. I had data issues even I have full bar of signal. But I do realize that data drop issue is location related. Every time I go to the same place, I got slow or data drop problem. Ha! maybe something isn't configure nicely between the tower and our S2.
yea, I was in Chicago this weekend, kept turning on Airplane mode and back on..
at&t is making me pretty mad.
GT-i9100
4.0.3
Baseband version
I9100XXLPH
XXLPH Kernel as well.
I am in Colorado and my service is great. I dont have much experience with the GB radios because as soon as I got the phone Iw ent to ICS and never went back
It may be worth checking the sticker under the battery to confirm the phones version. In Australia, New Zealand, Israel and some other countries they also sell the I9100T which is just the same as the international version but works better on a T model modem. There are plenty of them linked in the Aussie thread in general.
Sent from my GT-I9100T
mfriedman79 said:
@robsw
I noticed you are located in Chicago. the problem could just be that AT&T sucks horribly in the downtown area. specifically anywhere near River North or the loop. I have tried just about every available modem and I still have data connection issues in those areas. Even friends with iPhones comain about poor data in those areas.
Click to expand...
Click to collapse
I'm in the North suburbs. This most often occurs when I'm driving. The call will drop and more often than not, when I glance down at the phone, data will be syncing.

Would a firmware update cause reception issues?

Had no issues from in certain parts of my house with stock Bell firmware. Flashed 2.3.5 version and now i consistently get no service several times throughout the day. I'm going to flash back, and see if it fixes itself. I'm coming from an HTC device. Do these samsungs have different radios included in the firmware if thats even possible lol?
Try flashing a different modem.
Sent from my GT-I9100 using XDA App

Calling all Canadians! Bell Telus and Rogers users.

Alright so ill start this of by saying, Picked up my note today and loving it so far. Got it rooted thanks to Da G and getting ready to get into roms.
Anyway im making this thread to see if anyone else has tried anything out on the non-AT&T notes(i.e I717M and what not). So far from what i have read people are developing mostly for the AT&T model and saying its not for bell rogers or telus. Now I have been in the samsung world for a while and when it comes to my galaxy there was always ways around this.
For instance most of my ROMs were made for the international version not my bell version. But as long as I kept a copy of the bell modem on my phone i could just flash that and the ROM worked great. So does anyone have a copy of the bell telus or rogers modem for the note? or know if there all the same?
Another example in the galaxy s world was the captivate(Same soft keys as our phones). A person with a captivate could flash an international ROM as long they made a soft key fix when they developed the ROM.
One of the main reasons I ask all of this is because i see so many N7000 ROMs up and running and am wondering what will and wont work.
Look forward to hearing from you all
adamtrace said:
For instance most of my ROMs were made for the international version not my bell version. But as long as I kept a copy of the bell modem on my phone i could just flash that and the ROM worked great. So does anyone have a copy of the bell telus or rogers modem for the note? or know if there all the same?
Click to expand...
Click to collapse
you can get all the carrier radio/modem, and even the kernel from carrier here:
http://forum.xda-developers.com/showthread.php?t=1506212
---------- Post added at 02:08 AM ---------- Previous post was at 02:05 AM ----------
and here: http://forum.xda-developers.com/showthread.php?t=1630843
---------- Post added at 02:10 AM ---------- Previous post was at 02:08 AM ----------
sorry, I also forgot this kernel: http://forum.xda-developers.com/showthread.php?t=1589389
Bell note here. Been. The at & t roms with no problem.
The only issue that I have is the Yellow Pages crap that appears in my contact list as well as at& t bloat depending on the rom. Easy enough to deal with though.
Aside from that, it's been perfect.
Currently on Team Perfection 4.0.4.
Sent from my SAMSUNG-SGH-I717 using xda premium
I forgot to add that I haven't had any issues with data speeds at all.
Also, Don't venture into the N7000 roms because they will not work.
Sent from my SAMSUNG-SGH-I717 using xda premium
The N7000 ROMs can hard brick your phone since the hardware if the two models are completely different. AS Far as ROMs go, most are based off the AT&T software simply because that's the only ICS leak we have available. But you can use any ROM for the i717 on your Bell Note. I have a Bell Note and flashed almost every ROM and never ran into any problems. Also, Ruth the help ofa lot of people on this sure, I've made stock images of the Bell, Telus, and Rogers Notes so we can always go back. Best if luck and don't hesitate to ask anything.
Thanks for the info, I get mine today and was wondering the same thing.
Yesterday I flashed my Rogers Branded Galaxy i717 with Bell Rom and Kernel and have not 1 issue. I chose to flash the rogers i717 with Bell because I use bell mobiletv and this was the only way to get this particular app to work. Again not 1 issue with data or anything else.
No Rooted device either. Just flashed using ODIN.
I'm currently running the UCLE2 Rom on my Rogers i717. I've noticed that I am not getting LTE where I should be. And GPS connectivity is shoddy at best.
I have a second i717 which is stock that is with me to compare (family member).
I am going to flash the Rogers modem to hopefully correct atleast the LTE issue. Anyone know if this would improve my GPS connectivity as well?
For a number of years I have been buying Canadian phones to use on ATT. Canadain ROMs have less restrictions than ATT. For instance tethering and NFC are not locked. Also after rooting my Roger's Note it took under a minute to remove the Rogers branding. (all except splash screen) I was left with a fully optioned unbranded ROM.
I did want to try the stock UCLE2 ROM out of curiosity but I thought it would not install because my phone was not an ATT I717. How did you install it eugenekim618? Personally I would rather wait for the Rogers ICS version. Keep checking everyday to see if it is available.
I have tried quite of a few of the ROMS on here with my Bell i717M, no problems at all so far, other than the "android.phone has stopped working" at startup, I don't know the cause but it only happens at boot.
DO NOT use N7000 roms! But all of the AT&T stuff has worked great for me.
Agoattamer said:
For a number of years I have been buying Canadian phones to use on ATT. Canadain ROMs have less restrictions than ATT. For instance tethering and NFC are not locked. Also after rooting my Roger's Note it took under a minute to remove the Rogers branding. (all except splash screen) I was left with a fully optioned unbranded ROM.
I did want to try the stock UCLE2 ROM out of curiosity but I thought it would not install because my phone was not an ATT I717. How did you install it eugenekim618? Personally I would rather wait for the Rogers ICS version. Keep checking everyday to see if it is available.
Click to expand...
Click to collapse
I followed the posts in the Dev section to Root the phone.
Then installed CWM.
The picked a ROM I thought was good and followed the instructions in it's respective post to install.
I've done a lot of ROM installs for the Dell Streak I used to have and for a Sony Xperia X10.
So I am not totally unfamiliar with the process. Just a matter of getting used to the delivery method for each manufacturer. And then, dealing with the quirks of a ROM that is not 100% for your carrier. Goes with the territory, right?
I tried to read all the posts in a given thread as much as I can.
So you are saying you didn't install the one click odin stock UCLE2 ROM?
Agoattamer said:
So you are saying you didn't install the one click odin stock UCLE2 ROM?
Click to expand...
Click to collapse
No, that doesn't work for non AT&T phones I believe. I tried it, and ODIN recognized the COM, but failed to install. From my readings, can't do the one click install on Rogers since it's not a Rogers ROM.
all custom roms should work no problem, ive flashed tons on my unlocked bell note.
its the stock odin files when you want to make sure you get the proper device.
Hey guys Ive flashed pretty much all the roms I can and some I cant lol. So far my experiances have encountered a few setbacks but nothing substantial and allot if not most of the bugs and glitchs occurring in the first & second gen of roms have been fixed or patched.
As far as roms go as was already mentioned as long as you stay away from n7000 model roms and stick to i727 youll be ok. With at&t roms I always seem to have signal and gps issues. Generally tho I find my signal problem will clear itself up on its own and I believe is actually just just caused by the fresh software 'settling in', even though my signal appears low or fluctuating speed testing always shows Im getting peak d/l & u/l speeds. If the signal doesnt seem to improve flashing the Bell stock modem via cwm always does the trick. Gps usually works great, very fast & accurate, when Im having location issues I use the 'faster fix' app from the market, I dont know about anyone elses experiance but allot of the times theres a problem the gps server isnt set to the normal 'north america pool' but servers Ive never seen before or set to an 'international pool'.
All in all besides signal headaches the only other recurring problems are the inherent and unpredictable random force closing of system apps. It can be pretty random but I find a few constant trouble makers to be at&t software update, android phone. At&t update can be disabled easily under applications in the main settings or I was able to actually remove it using 'rom toolbox's app manager but strangely not with root toolboxs remove system apps. For pretty much all other f/c problems the remedy is a running of 'fix permissions', there are a bunch of ways/apps to do it and Ive found using 'rom manager' works the best meanwhile rebooting into recovery and fixing permissions from there will actually cause more problems.
Ok so those are the most recurring and annoying issues Ive had to name a few but the list is too big to write merely because Ive tried just about every rom right from the sketchiest unstable first releases and everything in between lol so feel free to drop me line if your stuck on a problem cause I might be able to help.
But before I end this novel here lol I just flashed the new 'OnlyOne Beta2' rom from the development section and it runs great. The rom is super stable, very fast and features both fully functional S Voice app and fully functional S Notes app. If you havnt tried S Notes yet its awesome the new functions and abilities totally blew me away so I highly recommend you give this rom a try!
eugenekim618 said:
I'm currently running the UCLE2 Rom on my Rogers i717. I've noticed that I am not getting LTE where I should be. And GPS connectivity is shoddy at best.
I have a second i717 which is stock that is with me to compare (family member).
I am going to flash the Rogers modem to hopefully correct atleast the LTE issue. Anyone know if this would improve my GPS connectivity as well?
Click to expand...
Click to collapse
If you had LTE before and lost it through flashing a custom ROM or whatever then try changing your APN to your Carrier LTE network. If you never had LTE when you bought your phone, probably the seller gave you a wrong sim. tell her to give you a 403 LTE capable sim, the 401 is only 4G.
andronikal659 said:
If you had LTE before and lost it through flashing a custom ROM or whatever then try changing your APN to your Carrier LTE network. If you never had LTE when you bought your phone, probably the seller gave you a wrong sim. tell her to give you a 403 LTE capable sim, the 401 is only 4G.
Click to expand...
Click to collapse
Thanks for the tip. But I got everything running again. I did have LTE to start, and have a LTE sim card. The *#2263* certainly helped. And Flapjaxxx's GPS tools in his ROM helped me get the GPS back up to par.
eugenekim618 said:
Thanks for the tip. But I got everything running again. I did have LTE to start, and have a LTE sim card. The *#2263* certainly helped. And Flapjaxxx's GPS tools in his ROM helped me get the GPS back up to par.
Click to expand...
Click to collapse
ok now I just lost my LTE after flashing new ROM from Seraphim Stratosphere. How did you get it back. I factory wipe everything and flash Rogers modem and it doesn't work. How did you manage to get LTE back? btw I have a Canadian Note with Rogers. the Saurom ROM was canadian and I had LTE too.
andronikal659 said:
ok now I just lost my LTE after flashing new ROM from Seraphim Stratosphere. How did you get it back. I factory wipe everything and flash Rogers modem and it doesn't work. How did you manage to get LTE back? btw I have a Canadian Note with Rogers. the Saurom ROM was canadian and I had LTE too.
Click to expand...
Click to collapse
Try *#2263#
Then force select LTE, and select ALL. That should force the LTE connection. So watch the connection bars. You should see a loss of connection, then reconnect on LTE. Once that is established, do the code again, and just select automatic.
eugenekim618 said:
Try *#2263#
Then force select LTE, and select ALL. That should force the LTE connection. So watch the connection bars. You should see a loss of connection, then reconnect on LTE. Once that is established, do the code again, and just select automatic.
Click to expand...
Click to collapse
When I try dialing it, it says error can't find USSP or something like that... What does this mean?
Just to be clear that im doing the right thing. I go to the dialer and punch the code *#2263#. How do I "force select LTE"? will something popup for me to select it or should I go to settings/ wireless and networks... I don't have those options in "wireless settings", I only have APN settings...

[Q] Trying to get ics 4.0 on my Samsung Showcase

So after reading through all the posts about flashing my phone to ics from droidstyle's post, i ended up trying to flash my phone from 2.3.5 (which I was not able to update normally by my crappy carrier) to one of the ics roms. Which ended up giving me zero 3g access. My question is are their specific files i can pull from a working Showcase with the latest carrier supported os, to put on my phone after i flash it to ics to get it to access 3g again? My problem is all these roms and what not tend to be based off verizons phone the fascinate. Which as far as i can tell are almost identiacal except a few differences. I dont have verizon as my carrier but a little kansas based one called nex-tech.
there is a 3g data fix.zip floating around here somewhere in this section...thats what u need.
*edit found it
http://dl.dropbox.com/u/59704791/Data_fix_ISC.zip
So that'll fix it? Ur awesome. I tried searching about 3g but I couldn't find anything
Sent from my A854 using xda app-developers app
OK so another question... if that doesn't work how do I revert back to the stock OS from my carrier that gives me 3g access
Sent from my A854 using xda app-developers app
Birdman2007 said:
OK so another question... if that doesn't work how do I revert back to the stock OS from my carrier that gives me 3g access
Sent from my A854 using xda app-developers app
Click to expand...
Click to collapse
go to rootzwiki and download the stock eh09 or ei20 package then follow the going back to stock part of the guide.
ok, so after all that i still dont have 3g access. Tried reverting back to 2.3.5 but it wont give me my 3g back at all.
Birdman2007 said:
ok, so after all that i still dont have 3g access. Tried reverting back to 2.3.5 but it wont give me my 3g back at all.
Click to expand...
Click to collapse
most likely you will have to call your carrier and have them do a esn swap or activate a old phone on your line then switch back.
I went down to the office and they did a swap of a phone they had in the building. No luck what so ever. My girl friend and i have the same exact phone, minus a small hardware update between them. Ive completely erased all of my phone and flashed a generic showcase rom and updated through their website. They programmed it and all that jazz but no luck...
phone info
hardware version 1500.05
firmware version 2.3.5
Baseband version S:i500.05 K.EI20
Biuld number SCH-I500.EI20
If u need any other info im happy to do anything to get this damned 3g back
Birdman2007 said:
I went down to the office and they did a swap of a phone they had in the building. No luck what so ever. My girl friend and i have the same exact phone, minus a small hardware update between them. Ive completely erased all of my phone and flashed a generic showcase rom and updated through their website. They programmed it and all that jazz but no luck...
phone info
hardware version 1500.05
firmware version 2.3.5
Baseband version S:i500.05 K.EI20
Biuld number SCH-I500.EI20
If u need any other info im happy to do anything to get this damned 3g back
Click to expand...
Click to collapse
You want an easy fix? Activate it on a Verizon account....
I'm not trying to offend you, but Samsung created it for Verizon network...you might be able to program it to work on another, but you might not...idk
DROID DOES, Apple did...like I forgot when
Well the phone is a Nex-tech phone, that is where i bought it from. That is the local cell phone provider here. Its worked flawlessly rooted for almost 6 months. Then i decided to try and get ics on it and followed the guide droid so awesomely wrote up for everyone. It didnt work so well for me, because Nex-tech is some random generic cdma cellphone provider.
Birdman2007 said:
Well the phone is a Nex-tech phone, that is where i bought it from. That is the local cell phone provider here. Its worked flawlessly rooted for almost 6 months. Then i decided to try and get ics on it and followed the guide droid so awesomely wrote up for everyone. It didnt work so well for me, because Nex-tech is some random generic cdma cellphone provider.
Click to expand...
Click to collapse
I had a Sprint Epic for a brief time but live in an area where it was using Nex-tech's towers since Nex-tech is part of Sprint's roaming alliance. I was running custom Froyo roms from XDA because there was no official Froyo release at the time. After a few months it had the same problem with losing 3G. I spent two hours on it with Sprint's tech support and never got it to work again. They even sent me a refurbed phone and it failed right out of the box. They wanted me to drive to the nearest store to have them activate it, which was 1 1/2 hours away when it should have been able to activate thru Nextech's system. Needless to say I ate the ETF and got a Fascinate.
My theory is Nextech has some kind of black list that shuts off data on phones it thinks are roaming for an excessive amount of time. Maybe switching to an ICS Rom designed for the Fascinate might have triggered that.
Good luck with getting it working. The main thing that keeps me from going back to Nextech is their lame tech support and huge repair times instead of refurbished swapouts. I keep hoping when Nextech's contract with Sprint is up next year maybe Sprint will come out here.
Sent from my SCH-I500 using xda app-developers app

[Q] What Are My Options? - i717R stock 4.0.4 Rooted/Unlocked WindMobile

Before I get in to details about my conundrum, let me explain that I have experience with flashing all sorts of stuff with HTC phones, so lay it on me.
Now for what im running.
Rogers i717r, with rogers 4.0.4 on Wind Mobile. Voice/data works...ish
I purchased the phone from a shoddy cellphone liquidator (i know, i know, but I NEEDED a phone)
I poked around in the phone for a bit, the flash counter was at 6, and ICS blaze.zip was on the sd card.
The Baseband is Unknown.
I Have rooted it.
always shows 4 bars and wont let calls go through sometimes in 3g mode.
ive searched though this forum for a week, i see alot of back and forth.
Can i install a ICS modem on jb?
does the flash counter have a limit?
should i just stick with ICS stock and try modems?
get me running in tiptop shape, and i shall donate.
ahcraps said:
Before I get in to details about my conundrum, let me explain that I have experience with flashing all sorts of stuff with HTC phones, so lay it on me.
Now for what im running.
Rogers i717r, with rogers 4.0.4 on Wind Mobile. Voice/data works...ish
I purchased the phone from a shoddy cellphone liquidator (i know, i know, but I NEEDED a phone)
I poked around in the phone for a bit, the flash counter was at 6, and ICS blaze.zip was on the sd card.
The Baseband is Unknown.
I Have rooted it.
always shows 4 bars and wont let calls go through sometimes in 3g mode.
ive searched though this forum for a week, i see alot of back and forth.
Can i install a ICS modem on jb?
does the flash counter have a limit?
should i just stick with ICS stock and try modems?
get me running in tiptop shape, and i shall donate.
Click to expand...
Click to collapse
I am not on Rogers, but I think there are many that have great success with Blaze running a JB rom. Trying different modems will have no ill effects, it will either work or it wont. There are many on Rogers that carry a pocket full of modems with them and swap them out depending on the area.
As for the flash limit, if there was one, im sure I broke it long ago.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
captemo said:
I am not on Rogers, but I think there are many that have great success with Blaze running a JB rom. Trying different modems will have no ill effects, it will either work or it wont. There are many on Rogers that carry a pocket full of modems with them and swap them out depending on the area.
As for the flash limit, if there was one, im sure I broke it long ago.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
Im not on rogers either, i need this phone to function on AWS.(wind mobile)
I fiddled around with the APN, and put as one setting instead of separating Internet and mms, it tends to wake up the "4g" faster.
so yeah, i should be fine flashing cyanogen 10.0 with the blazeICS modem? to be connected to a aws network.

Categories

Resources