Related
Hey, I hope I can get some help here. I'm a total noob and I don't know if other similar threads apply to me. Anyway, I have a rooted Xperia Neo V, with ICS 4.0.3 and I used ROM Manager app to casually flash the "Xperia Pureness" ROM I downloaded. I didn't do a full wipe because I was too stupid to look at the instructions. Is this fixable?
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Xperia Neo V stuck at SONY logo
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
skral said:
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
Click to expand...
Click to collapse
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
samneov said:
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Click to expand...
Click to collapse
Thank you. At some point the instructions require that I enter *#06# on my phone but I can't boot, it gets stuck at the Sony logo. Is this step necessary?
as can be interpreted u have a unlocked bootloader( i guess that's right)
you can try to use Sony Ericssion Update service to restore your phone to ICS
read this 1. http://communities-origin.sonyericsson.com/message/176189
and this 2.http://talk.sonymobile.com/thread/30938
see if it helps
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
samneov said:
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
Click to expand...
Click to collapse
skral said:
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
Click to expand...
Click to collapse
Ya ..you can install custom ROMS now i hope u hv boot loader unlocked ..head over to the Neov development section and download the ROM you want ..Follow the instructions really carefully while installing ROMS
And the answer of your second question is NO. When installing stock ROM or repairing it all apps and setting are gone nothing to do with wipe dalvik cache
Problem persists
So i tried installing pureness once more, this time i made sure i wiped davik cache. Same problem stuck at SONY and so had to revert to stock once more. I havent unlocked BL yet. Is it necessary for installing Pureness. Also can somebody tell me if i am doing it right.
1) used flash tool to downgrade to .562
2)rooted using Doomlords tool
3)Used flash tool to upgrade back to .431
4)Installed cwm auto installer apk from google play
5)Installed cwm
6)Booted into recovery
7)Made a backup
8)Used install from zip option to install Pureness
9) reboot and its stuck
Cant even access cwm since its stuck at that point , so i cant use the backup also right.
First, flash a specific kernel for that ROM.. Look for the link for kernels in the above post!
Flash the kernel first.. Reboot into recovery... Wipe data, wipe cache partition, wipe dalvik cache... And then install zip from sd card!
Reboot your phone! You'll be done now!
flashing kernel
I am guessing for flashing the kernel , i have to unlock bootloader.
You didn't unlock your bootloader?!
You definitely can't flash a custom kernel without unlocking it!
I suggest you go with the official Sony's way..
http://unlockbootloader.sonymobile.com/
BL
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Yea.. That would void your warranty!
But unlocking the bootloader will allow to install custom ROMs which shall be very fast and smooth as compared to the stock one... and I don't think you'll revert back to stock!
Though relocking can be done but you won't be able to update your phone through over the air updates!
It's your choice!
1. Unlock bootloader using sony's,
Method
2. Flash the custom kernel
3. Get into CWM
4.wipe delvic/data/battery stat
5. Install custom rom
6. Install gapps(if necessary)
7.wipe delvic
8. Reboot
That are common steps
Also use the recommended kernel by the developer
Also follow his instruction...if in doubt serch if still confused post here
Sent from my MT11i using xda app-developers app
Mods ftw
I dont want to unlock bootloader now. Presently having fun with different mods . Once i get tired of them , will try unlocking. Please suggest some useful mods.Currently installed Romcontrol by jjdoctor and walkman for ICS by thilinac.
SAMPLE TUTORIAL
I-SCREAM-11i + Night-Elf kernel RC5 tutorial
================================================== =========
requirement: unlock bootloader
================================================== =========
download I-Scream_official_431.zip [copy to sd card]
download I-Scream_official_431_update.zip [copy to sd card]
download I-Scream_restore_vdd_level.zip [copy to sd card]
download FASTBOOT [extract to PC]
download kernel [boot_ics_v1_rc5.img]
copy/paste it to fastboot folder
rename it to boot.img
open cmd window(by pressing shift+right click mouse & open command window)
turn off phone,connect phone to pc by pressing settings button (now led will turn on will lit blue) [PdaNetA350x64 for 64BIT OS driver]
paste this in cmd - fastboot flash boot boot.img
press enter
================================================== ======================================
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard I-Scream_official_431.zip
- install zip from sdcard I-Scream_restore_vdd_level.zip
- reboot into system
LED Flash not working
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
skral said:
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Click to expand...
Click to collapse
even if u unlock u r boot loader you would be able to use SEUS....i did so when my phone simple stopped responding after flashing certain kernel
skral said:
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
Click to expand...
Click to collapse
please read the related threads carefully ....use search.....usually there is a solution given.....else it is a bug which will be fixed in the next release....do a little digging:laugh:
basically i have the same problem.. (neo)
already unlocked bootloader.. apply nightelf kernel successfully..
step i do:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard Xperia_Ice_Cream_Pureness_build_3_NeoV.zip
- install zip from sdcard Neo_patch_for_Xperia_Pureness_build_3.zip
- reboot into system
still stuck at sony logo.. then i remove battery, try to boot into cwm..
it still works!
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before..
so.. got any idea or solution? thx in advance...
hello ,
i have Xperia NEO with ics 4.0.4 , 4.1.b.0.431 .. and i want to use a custom rom as the stock one is laggy and slow !! (its my first attemp to use custom rom )
FIRST .. i've unlocked bootloader by the official method of sony website..
SECOND .. rooted the device by this method
http://forum.xda-developers.com/showthread.php?t=1681940
THIRD .. installed CWM by the new method of this topic :
http://forum.xda-developers.com/showthread.php?t=1364509
FOURTH .. made a backup by CWM .
now ... is everytihng ok ? can i flash any custom rom by cwm ?
if any problem happens can i restore the backup by cwm without problem ??
sorry for the very noob questions but its my first try ...
thanx in advance..
Yes .. u can.. just browse the development section.. i personally recommend the cm9 (rc2).
And dont worry.. everyone was a noob once..
Sent from my Neo V using xda premium
please help ...
i tried to flash SOS 1.3 rom and the device now to booting ... it's stucking at the sony logo ....
please help ...
Did you flash a custom kernel before installing the ROM?
Sent from my Xperia Neo V using Tapatalk 2
sarmoodi said:
please help ...
i tried to flash SOS 1.3 rom and the device now to booting ... it's stucking at the sony logo ....
please help ...
Click to expand...
Click to collapse
Dont panic.
First install a new kernel image, like Suave Kernel Suave Kernel
This will install also a CWM. After, install a new ROM in CWM.
I´m using Pureness, but requires a different kernel than Suave. But you can follow the instructions of Suave Kernel:
Steps:
1. Power down device and get into FASTBOOT MODE -> switch off device hold menu key & plugin usb. (LED notification turns BLUE)
2. check fastboot with "fastboot devices"
3. flash boot image
fastboot flash boot boot.img
4. Reboot with "fastboot reboot"
Before install a new rom, be sure to wipe all information in cache, dalvik and system partitions, as in the instructions (from Pureness):
1.Factory reset in cwm
2.wipe cache partition
3.wipe dalvik cache
4.Format /system (in mounts and storage)
5.Format /cache
6.Format /Data
7.Install rom zip
8.Reboot now and you are done !
1. Always flash kernels before installing custom roms
2.always wipe phone completely (cache,dalvik,data...)
3. Not all kernels are compatible with all roms, so read each dev post carefully,and then flash corresponding kernels.
^as he said, first wipe all the kinds of data's before installing any new ROM & remember to take backup always.
Sent from my MT11i using xda app-developers app
thanx everebody for support ..
i did not flash a kernel .. so this is the problem as i've understood ...
i've entered to cwm by hotboot method :
http://forum.xda-developers.com/showthread.php?t=1681940
and flashed jj hybrid rom ... and it worked with the stock kernel ...
so next time if i want to flash a custom rom i have to flash a compatible kernel first ..
thanx again ..
I was trying to install Custom ROM from this post
http://forum.xda-developers.com/showthread.php?t=1994064
after i did these steps
1.Flash the respective kernel for your device
2.Reboot into Clockwordmod Recovery
3.Factory Reset
4.Wipe Cache Partition
5.Advanced>Wipe Dalvik Cache
6.Mounts and storage > Format /system
My mobile got hanged and restarted now my mobile is stuck in sony logo screen and i am not able to boot o CWM Recovery
I have a Nandroid backup pl help me fix my mobile i will be very thankfull
pl do somethis
Flash the recovery from the computer and try again. You don't have to reboot where you did, you have to continue with the steps.
Did you increase your system partition?
Or it wouldn't work
Sent from my Xperia Neo V using xda premium
Flash via flashtool
Sent from my LT18i using xda app-developers app
thanks guys
thank u so much guys it helped me a lot
Please Suggest Me a Working ROM FOR MY Xperia NEO L
Please suggest me a working rom that works perfectly like jelly bean
please help
hi,
i was trying to instal Cyanogenmod 7.2 ROM on my rooted neo l,but by mistake i missed the cm7.2 img step and install rom directly.
now phone is stuck on sony logo.
please help me to get working.
dabas.dabas said:
hi,
i was trying to instal Cyanogenmod 7.2 ROM on my rooted neo l,but by mistake i missed the cm7.2 img step and install rom directly.
now phone is stuck on sony logo.
please help me to get working.
Click to expand...
Click to collapse
Just flash the CM7 kernel and you'll be up and going.
say no to Drugs and ICS!
plz help me....???
Jerin1991 said:
I was trying to install Custom ROM from this post
http://forum.xda-developers.com/showthread.php?t=1994064
after i did these steps
1.Flash the respective kernel for your device
2.Reboot into Clockwordmod Recovery
3.Factory Reset
4.Wipe Cache Partition
5.Advanced>Wipe Dalvik Cache
6.Mounts and storage > Format /system
My mobile got hanged and restarted now my mobile is stuck in sony logo screen and i am not able to boot o CWM Recovery
I have a Nandroid backup pl help me fix my mobile i will be very thankfull
pl do somethis
Click to expand...
Click to collapse
hi bro this problem is happen to me also.. do u found any solution about this problem plz help me i use xperia Neo l mt25i
tukulu1991 said:
hi bro this problem is happen to me also.. do u found any solution about this problem plz help me i use xperia Neo l mt25i
Click to expand...
Click to collapse
What exactly did you do to get stuck?
Sent from my Xperia Neo V using Tapatalk 2
i have solvd that...
Attitude.SSJ said:
What exactly did you do to get stuck?
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
ok... now my mobile is ok.. I have flash a boot.img file named boot400mb.img lyk that then my recoverymod is work and then I install again the smart rom xperia neo L v1.0 with a full wipe now my mobile is ok working good.. thnx u all and xdadevelopers
tukulu1991 said:
ok... now my mobile is ok.. I have flash a boot.img file named boot400mb.img lyk that then my recoverymod is work and then I install again the smart rom xperia neo L v1.0 with a full wipe now my mobile is ok working good.. thnx u all and xdadevelopers
Click to expand...
Click to collapse
can u share the img file and the recoverymod file? i mean the the file that u use to repair this problem..
thankyou
Sola stuck at Sony boot logo
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
saeedirfaan said:
Hi,
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime. It would be very kind if you could help me in getting the phone to work as normal.
Thanks,
Irfan
Click to expand...
Click to collapse
Flash the kernel... Step one which you missed is causing the problem... Once you flash kernel the rom should boot... Or if you want to go to stock flash stock ftf file with flashtool...
Sent from my Xperia Neo V using Tapatalk 2
Attitude.SSJ said:
Flash the kernel... Step one which you missed is causing the problem... Once you flash kernel the rom should boot... Or if you want to go to stock flash stock ftf file with flashtool...
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
I have same problem after installing via CWM, and now my phone stuck on sony logo. i won't flash with flashtool cause I forgot to enable usb debugging. anyone could halp me?
just flash the kernel and you will be able to boot to recovery then flash the rom..
Sent from my Xperia Neo V using xda app-developers app
ribek said:
I have same problem after installing via CWM, and now my phone stuck on sony logo. i won't flash with flashtool cause I forgot to enable usb debugging. anyone could halp me?
Click to expand...
Click to collapse
switch on the phone.
Connect using USB cable in ON condition.
After sometime switch off.
Connect in flashmode
Remove
Connect in Fastboot mode
Now try flashing. If it does not work
try SEUS http://sony-ericsson-update-service.en.uptodown.com/
Hit thanks if it helps
where to find kernel for xperia pro rom kitkat
mksallam said:
where to find kernel for xperia pro rom kitkat
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1642480 see this
Hey,
how and with what I have to flash the Xperia Neo CM10 to get shut on it?
I have a Unlocked Bootloader, I have root and I have CWM installed.
Every time I try to flash a Rom (wipe, factory reset, format system) while the installation works, but the phone will not boot. I just get a Loob. I play with FlashTools a new system, root and CWM is gone also.
Can someone please help me?
You have to flash the kernel inside the ROM first
Sent from my Dark Xperia neo V now Free
milanjm said:
You have to flash the kernel inside the ROM first
Sent from my Dark Xperia neo V now Free
Click to expand...
Click to collapse
Hey,
thanks for the reply.
So first the kernel, then the rest?
But in almost all of Rome is that you must also format the system. Then the kernel does not back away?
by this Rom:
http://forum.xda-developers.com/showthread.php?t=2111941
is, for example, that you should flash the kernel, then a floor-ROM without kernel. I've sucked and flashed me a ... then the kernel was gone.
I think at least that was gone, but the sign of the kernel did not.
I flashed so many phones, but I've never had such problems.
lolamarcel said:
Hey,
thanks for the reply.
So first the kernel, then the rest?
But in almost all of Rome is that you must also format the system. Then the kernel does not back away?
by this Rom:
http://forum.xda-developers.com/showthread.php?t=2111941
is, for example, that you should flash the kernel, then a floor-ROM without kernel. I've sucked and flashed me a ... then the kernel was gone.
I think at least that was gone, but the sign of the kernel did not.
I flashed so many phones, but I've never had such problems.
Click to expand...
Click to collapse
Hi,
In general the process is:
Extract the kernel from the ROM on your PC
Copy the ROM and GAPPS in your phone SDCARD
Flash the kernel (I'm using Flashtool, but there're other tools)
Boot into recovery
Do a factory reset, i.e. wipe data (this will format system, data, cache, etc.)
Install the ROM from the SDCARD
Install GAPPS from the SDCARD
Wipe dalvik cache
Reboot
This is the normal procedure. I have used it for all the ROMs I have installed and never had a problem.
I recommend you always to do a nandroid backup first. This way if something goes wrong you can flash the old kernel and do a recovery
Good luck
Hey,
I have the FUSION kernel installed.
I booted into CWM, factory reset did, wipe data, format system, format cache, format data (the last 3 things I must not do so?)
It is the FUSION logo, and then it is SUPER JELLY Bean. And it happens nothing. Was now over an hour away, and nothing left. Battery out, rebooted ... again the same.
I come now to the CWM no longer pure.
lolamarcel said:
Hey,
thanks for the reply.
So first the kernel, then the rest?
But in almost all of Rome is that you must also format the system. Then the kernel does not back away?
by this Rom:
http://forum.xda-developers.com/showthread.php?t=2111941
is, for example, that you should flash the kernel, then a floor-ROM without kernel. I've sucked and flashed me a ... then the kernel was gone.
I think at least that was gone, but the sign of the kernel did not.
I flashed so many phones, but I've never had such problems.
Click to expand...
Click to collapse
Kernel doesn't go when you format system... So do like how he said... Everything will be fine...
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
Kernel doesn't go when you format system... So do like how he said... Everything will be fine...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading
lolamarcel said:
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading
Click to expand...
Click to collapse
I have not tried SJB, so I can only tell you the normal procedure.
Try with another JB ROM and follow the steps I explained to you. In general it's better to use the kernel inside the ROM. Open the ROM with any zip tool and extract the kernel (the boot.img file)
If it works, then try again with SJB.
BTW Fusion is a closed thread. Try with the latest release. It will be more stable (this I used in the past)
lolamarcel said:
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading
Click to expand...
Click to collapse
Flash kernel... Go to recovery... Format system, format data, wipe cache, wipe dalvic cache.... Install Rom then...
Sent from my Xperia Neo V using xda app-developers app
Hey,
thanks for the replies and the help.
I did it step by step, I've tried other Roms. The phone did not start easy.
I have now pulled the CM10 and installed so as I know it and as it was described ... it worked right away.
Funny that it was not with the others.
The thing with the kernel I do not understand quite.
Your writing should I extract the kernel. But when I look purely at the Rome, I see no boot.img or the like.
Also, almost all of which any kernel you should write JP supported. I had the merger kernel, which is designed to support in any case and is also recommended for the above Rome.
lolamarcel said:
Hey,
So ....
Step by step.
- Using the Flash Tool to install the driver FUSION
- I go to the CWM
- Factory Reset
- Wipe Data
-from the SD card do I install Rome
- From the SD card to install the patch
- From the SD card to install the Gapps
- reboot
Fusion character comes SuperJellyBean appears ... but it did not happen.
It is here at the install instructions:
1. copy super jelly bean and gapps to sd card OK
2. flash any jb kernel for neov.. i recommend fusion kernel 4.3 , fxp or shardul's cm10 kernel..Fusion-Kernel...OK
fusion kernel for neo and neo v download from this thread - Fusion 4.3
also shardul seths cm10 kernel works great too here Shardul kernel
3. flash stock ics .587 ftf excluding kernel and simlock.ta files.. I find nothing to
4. boot into recovery ok
5.full wipesok
ie :
wipe data / factory reset ok
wipe cache partition ok
wipe dalvik cache ok
in mounts and storage , wipe system , data and cache there is not but wipe format. In format, the kernel is gone and the CWM also
6. flash Super Jelly Bean ok
8. only for neo (mt15i) users patch here posted below. ok
7.flash gapps : use this link : Gapps For SJB ok
8.flash wifi modules of respective kernel NO
9.reboot ok
10.enjoy not enjoy. Not loading
Click to expand...
Click to collapse
copy the SJB 6.0 in the SD card with the gaaps
Please connect the phone with the flash tool and flash the kernal (fusion )
then start the phone... press the menu button with the volume button .
delete the require , system, data cache ,dalvik cache
then install from ZIP and install SJB and then without rebotting install the gapps.
just download the fusion kernal , SJB and the gapps
hi guys i have xperoa pro with stock rom 4.1.B_ 587. I root the mob and enter to recovery intstalled kitkat carbon rom i do all steps
1 wipe data
2 wipe cache
3 wipe dalvik
4 format (data-system-cache) from mount and storage
installing update complete i go back reboot from recovery
phone starts sony logo show and disappear more and more i waited for 30 minutes and nothing happen
i return to my stock rom
what is the problem can anyone tell me what to do
mksallam said:
hi guys i have xperoa pro with stock rom 4.1.B_ 587. I root the mob and enter to recovery intstalled kitkat carbon rom i do all steps
1 wipe data
2 wipe cache
3 wipe dalvik
4 format (data-system-cache) from mount and storage
installing update complete i go back reboot from recovery
phone starts sony logo show and disappear more and more i waited for 30 minutes and nothing happen
i return to my stock rom
what is the problem can anyone tell me what to do
Click to expand...
Click to collapse
You didn't flash the kernel...it's the img file inside rom zip...
Sent from my Xperia Neo V using Tapatalk 2
thanks a lo for ur reply but how to flash this image i only know how to flash kernel via flashtool
and when to do it after installing the rom or before
thanks again
mksallam said:
thanks a lo for ur reply but how to flash this image i only know how to flash kernel via flashtool
and when to do it after installing the rom or before
thanks again
Click to expand...
Click to collapse
Normally, you have to flash the kernel before the ROM (this is what I recommend) and you can do it using flashtool.
You can try now that you have already installed the ROM and it should also work. But it's not 100% sure.
BTW do you have the bootloader unlock? You need it for flashing the kernel
Good luck