I wanted to change again the Baseband cause i had some problems. I used the Guide of Dr.Notor. All went well he made the Backup of nv2 fiel and started the phone in Emergency Mode. After that the program tried to write ass but now it is on timeout after 45 minutes. I have no idea what to do. Please help me. The LGMDP is already running and the phone connected. What can i do?
Goldian said:
I wanted to change again the Baseband cause i had some problems. I used the Guide of Dr.Notor. All went well he made the Backup of nv2 fiel and started the phone in Emergency Mode. After that the program tried to write ass but now it is on timeout after 45 minutes. I have no idea what to do. Please help me. The LGMDP is already running and the phone connected. What can i do?
Click to expand...
Click to collapse
First of all, edit the thread's title to something more descriptive, like "Problem changing baseband"
Did the NV2 Backup complete successfully? It's the main thing, without that say goodbye to your phone signal.
Weird that 45m timeout, I changed my P500's baseband in less than 10m I think... did you follow drnotor's guide entirely? Including the part of disabling LG modem and not touching the phone until it finishes?
FD. said:
First of all, edit the thread's title to something more descriptive, like "Problem changing baseband"
Did the NV2 Backup complete successfully? It's the main thing, without that say goodbye to your phone signal.
Weird that 45m timeout, I changed my P500's baseband in less than 10m I think... did you follow drnotor's guide entirely? Including the part of disabling LG modem and not touching the phone until it finishes?
Click to expand...
Click to collapse
Yes.
Sorry for the bad title
If you have your nv2backup you could try flashing it over once again from step 1, maybe that works.
It worked. I stopped the program and run it again. My Phone is running again. The problem with error searching network on CM9 persists. The Baseband rechange doesn't bring the solution.
Now that you already have NV file if you use lgmdp always in emergency mode dont mather if you flash only bb or recovery or the entire rom but flash with phone already in emergency mode and lgmdp will not touch the nv file
Sent from my LG-P500 using xda app-developers app
Good tip. Next time I make it from emergency mode.
The stupid thing is that I risk a lot for nothing, cause the baseband didn't bring me something.
It has more signal for wifi and 3g
Sent from my LG-P500 using xda app-developers app
lipe082 said:
It has more signal for wifi and 3g
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
The new baseband was already on my phone, but I thought that maybe something went wrong the first time and therefore I get the "Error while searching networks" on CM9. After install it again the result remains the same.
Its a rom bug not your fault
Sent from my LG-P500 using xda app-developers app
lipe082 said:
Its a rom bug not your fault
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
I asked few times but nobody answered. I don't see it on Bug-List and so I thought it was the fault of my phone. I like ICS and JB but as I explained on other posts I live on the borderline to other countries and I cannot live with automatic search of networks, cause It can be really expensive for me.
Goldian said:
I asked few times but nobody answered. I don't see it on Bug-List and so I thought it was the fault of my phone. I like ICS and JB but as I explained on other posts I live on the borderline to other countries and I cannot live with automatic search of networks, cause It can be really expensive for me.
Click to expand...
Click to collapse
As said above, you will have the bug as long as you are using the junky Froyo RIL stack. This issue exists on CM7 as well since they've "fixed" the stupid 128KB SIMs by reverting the RIL stack. Messing with baseband will not solve anything for you.
http://code.google.com/p/cyanogenmod/issues/detail?id=5182
Ask your operator to have roaming deactivated, best I can offer if you want CM9+. On CM7, the RIL can be switched back to GB, with CM9 this causes a force-close loop with the phone app -> no go.
Is there a way to check whether I have a Funny SIM Card or not? And in case I have, is it possible to let it change from provider and with which excuse?
Goldian said:
Is there a way to check whether I have a Funny SIM Card or not? And in case I have, is it possible to let it change from provider and with which excuse?
Click to expand...
Click to collapse
Well, flash latest CM7, flash the attached ZIP and if your SIM does not get recognized, it is funny.
Thanks a lot.
I made all the steps and the SIM works. Now I have to hope that CM will revert the RIL to GB too, so that I can use CM9+.
You wrote that this Patch runs only on CM7 and not on CM9+. Is there in fact no chance to make a similar patch for the newer firmwares?
Yes maybe its a faulty rom.
Sent from my LG-P500 using xda premium
optimusjeet said:
Yes maybe its a faulty rom.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
yes it happens to me too.
Goldian said:
Is there in fact no chance to make a similar patch for the newer firmwares?
Click to expand...
Click to collapse
Sure there is, however I am not going to recompile CM9 for this, it requires patching files, overwriting the libs is no longer enough, as said above.
Do you mean mik_os git changes in the above issue link?
Easier would be that CM changes back to GB RIL.
Related
I was using the miui recent rom, released 04-04-2011, and then I was in the subway and service was lost, however upon going into a known service area, my phone still had no service. Tried reflashing the rom, tried every baseband, tried using SEUS, and still no luck.
Am stuck with "Your sim will not allow connection to this network"
anybody can help me?
Sounds like your phone company cut you off
fiscidtox said:
Sounds like your phone company cut you off
Click to expand...
Click to collapse
I hope not :S
EDIT: I FIXED IT, I HAVE NO CLUE HOW, BUT I DID!!!!1
DELETE THREAD SORRY
Wrong thread
Sent from my X10i using XDA Premium App
So I have a mesmerize but run fascinate roms and radio. I flashed the cm7. Test build then flashed back to stock with odin. And now im stuck on 1x data only. I've tried bout everything. Please help.
Fixed just need to reflash ec10 with pit file and repartoin and efs clear to redo programming.
Sent from my SCH-I500 using XDA App
Try a battery pull... if not that... then I would flash a different radio.
Sent from my SCH-I500 using XDA App
tweakymattman said:
So I have a mesmerize but run fascinate roms and radio. I flashed the cm7. Test build then flashed back to stock with odin. And now im stuck on 1x data only. I've tried bout everything. Please help.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yea, try the battery pull. If that doesn't work, try to odin the EC01 radio (I was told you can do that with the mez, but not sure). Also, this belongs in Q/A not development.
I've tried three different radios. None work. And I had to pull the battery several times for odin. And I posted this in development in hope of knowledgable developers seeing it.
Sent from my SCH-I500 using XDA App
tweakymattman said:
I've tried three different radios. None work. And I had to pull the battery several times for odin. And I posted this in development in hope of knowledgable developers seeing it.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Yeah im sorry for ur predicament but that's still not a reason to post in development..otherwise everyone with issues would
nitsuj17 said:
Yeah im sorry for ur predicament but that's still not a reason to post in development..otherwise everyone with issues would
Click to expand...
Click to collapse
Not to mention a reason for posting about a mesmerize problem in the fascinate forum - these guys don't use our phone so may not be able to help you
On a side note, this might be worth a shot, if not you'll need to flash a full stock build with odin with re-partition checked to make sure your phone is completely re-formatted;
http://www.youtube.com/watch?v=InN-Z340BO0
Either way, if you need to continue - post this in the mesmerize general forum (and only there).
Before you do all that try doing a simple ESN swap. Do a forum search right here in the Fascinate forums. A lot of people lost their 3G data when flashing ED01 Froyo. If you have the same problem myself and most of us had then flashing other radios and roms won't do a damn thing but make you mad.
Found it. http://forum.xda-developers.com/showthread.php?t=1051543
3G Signal Loss - Try DMU Rest or ESN Swap
Sent from my SCH-I500 using XDA Premium App
jamesnmandy said:
Found it. http://forum.xda-developers.com/showthread.php?t=1051543
3G Signal Loss - Try DMU Rest or ESN Swap
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
+1 to this, I've had to do it twice. Works like a charm
"Madness is only the first step to becoming what I am."
Sent from XDA Premium App
I ran into this same problem, I also have the Mes...here is what I did to fix, In Odin, I flashed the EC10 stock for the Mes, aqnd I checked the boxes "re-partition" and "EFS Clear", when I rebooted, I had signal (no 3g and couldnt make calls" but I used *228 and it re activated my phone, bingo, 3g back.
Basically what I did was remove ALL information on the phone, which included the MIN and MDN so when I re activated it and activated my data again.
You should try to hook your phone, up in qpst service painting and enter your info for the mez in the ppp tab
Sent from my SCH-I500 using XDA App
bwot75 said:
I ran into this same problem, I also have the Mes...here is what I did to fix, In Odin, I flashed the EC10 stock for the Mes, aqnd I checked the boxes "re-partition" and "EFS Clear", when I rebooted, I had signal (no 3g and couldnt make calls" but I used *228 and it re activated my phone, bingo, 3g back.
Basically what I did was remove ALL information on the phone, which included the MIN and MDN so when I re activated it and activated my data again.
Click to expand...
Click to collapse
Haha so your fix made the most sense to me. And also was the easyest. And now I'm stuck on bootloader. Uhg.
Fixed now back to old set up 3g works. Bad odin file.
Sent from my PB99400 using XDA App
hi guys,
i am having a bit of a situation, i have a sgs2 unlocked, rooted, 2.3.4, o2 sim card and since a few weeks, every day when i am at work, usually at 09.00am, my phone is literally stuck, when i arrive it works OK, even going in/out of the tube, then at work, (2nd floor office, good reception), after doing some texts, or some browsing, . basically out of the blue i cannot do anything, text, browse the internet or call but the strange thing is that the phone shows that there is signal, 4 bars, 10-11 asu. only option is to restart, i cannot even put the phone to flight mode, gets stuck...this tells me something is happening.
i know that o2 had a massive failure a few weeks back and when that happened i was on holidays out of UK, then when i got back, this problem started appearing....o2 support suggested to check the SIM, i got a new one, but exactly same problem happened again.. i reported them the issue again, they checked the network, just one time it appeared they had some problem in the area but then no more, yet i am the only one having problems in my office, and there's other people with o2.
what is even more weird, is that this happens ONLY when i am at work, during the weekends, not at work, the phone never gets stuck.
now, this is a rather annoying issue but i found on some other forum other people with the SAME issue, so perhaps is a known issue?
as further troubleshooting, when i bought the phone, it had 2.3.3 and a similar issue was happening, the DATA was getting stuck between the tube stations, after upgrading to 2.3.4, problem was solved.
so the big question is.... IS IT THE PHONE? IS IT THE SIM CARD? o2 support even suggested to change the SIM again, should i have had a massive case of bad luck to get a faulty one, again.....i even tried one of those apps that boost the signal, nothing.
any idea guys? to be honest i didnt plan to put ICS since i don't see that many benefits, and i dont think it will fix this issue in particular, or am i wrong?
thanks guys, sorry for the long post!
gab
I would say try ICS and you will see. You can always go back if you don't like it.
Odoslané z GT-I9100 cez Tapatalk 2
More?
Sent from my GT-I9100 using xda app-developers app
different modem?
pelpa87 said:
different modem?
Click to expand...
Click to collapse
Sorry...dont follow what u mean?
Sent from my GT-I9100 using xda app-developers app
He means that you should try to flash different modem. Also did you try the usual stuff like wipe/factory reset etc?
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
He means that you should try to flash different modem. Also did you try the usual stuff like wipe/factory reset etc?
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
i haven't tried that no, just a "fix permissions" from the menu... didn't seem to help. but is soo strange, only when i am at work this problem occurs.
gabriolinari said:
i haven't tried that no, just a "fix permissions" from the menu... didn't seem to help. but is soo strange, only when i am at work this problem occurs.
Click to expand...
Click to collapse
Try a different modem as i suggested...just remember the one u r using right now just for be sure....if not...as above said...u could do a full wipe flash just to be sure...
But it clearly has something to do with some antenna around your work...so you could try a diferent modem..a newer one....
Sent from my GT-I9100 using xda premium
pelpa87 said:
Try a different modem as i suggested...just remember the one u r using right now just for be sure....if not...as above said...u could do a full wipe flash just to be sure...
But it clearly has something to do with some antenna around your work...so you could try a diferent modem..a newer one....
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
thanks, i have just put on KH3 as suggested by http://forum.xda-developers.com/showthread.php?t=1656005 which reports similar issues i am experiencing
Hi
Try using ki4 modem ive used it forrever with no issues except when phone company messes around or icaan trying to hack.
---------- Post added at 11:05 AM ---------- Previous post was at 11:04 AM ----------
Hi
Try using ki4 modem ive used it forrever with no issues except when phone company messes around or icaan trying to hack. I don't understand why you installed modem with similar reported faults but.
Ok some feerback
Kh3 .. Temperature lowered and quicker gps but again phone stuck.. This time in a supermarket never be4. No good
KL1 phone cool faster gps and good battery too but got stuck again today at work
I had ki4 before or ki3 i think
Im smashinhlg my head on the wall.. Very annoying issue... SHall i try one more?? Any other ideas?? Bin the phone?
Sent from my GT-I9100 using xda app-developers app
Upgraded to ics 4.0.4... Never had this issue since then
Sent from my GT-I9100 using xda app-developers app
Good to hear you solved it mate Just be careful about wipes if you are on stock kernel.
Already put up siyah. Works well and fixed bt as well which was not working after upgrade
Sent from my GT-I9100 using xda app-developers app
First Let me say everything Here is all my personal Opinion and by just rooting phones and installing mod I already sorta voided my warranty. Okay Lets start, A few months when the ICS bug was Hot Like fish grease my phone's USB was corroded and would not charge. I went to a ATT Repair center and Got a new one/refurbish one and I notice that it didn't have much under the battery All it said was the Model number IME barcode and the "MADE IN CHINA" Letters.
I came home and the first thing I did was root install GB custom rom. I decided to wait for CM9 to taste ICS. After it was On nightly I install like any other installation and then move on to AOKP Rom from task, That rom has the feature that lets you change the text where you carrier label is. And I change which was fine. I went back to CM9 and that text Remain there and I did wipe/data like it said in the instructions, When I updated to the latest nightly I use Rom manager and booted into CMW (noob mistake) I wasn't paying attention and I got a soft brick. phone booted and showed SAMSUNG GALAXY SII but then just turn off and on buttons on bottom lit up like when you put your phone into download mode. I pull battery Use method to return to stock/root Using Odin Which if I'm correct it would have increase my counter (Correct me if I'm wrong) phone work Install a kernel with CMW using terminal install CM9 And even when I did those steps the same text That I had use was still There.
I found that very Weird but I still left it I didn't care. When the Leak ATT ICS came out Entropy said something about Bricking your phone something to do with the eMMC chip or whatever, Anyways Fast forward to lastnight/today I wanted to start from scratch and install a Samsung base rom just for giggles. And to my surprise I wipe my SD card and tried to wipe my phone but in the whole process my phone lag and I guess I press the button to wipe so many times I pull battery and guess what happen?... I got a soft brick again, Okay spend 30 mins again to redo my regular soft brick steps and my media scanner, Gallery, Camera didn't work. I then again wipe the phone and loaded semi v16c UCLE5 att update and my phone work again I formatted my sd card and my gallery camera started working again. But again the Carrier text from The very first AOKP rom Was still there in the lock screen.'
I again wipe and soft brick but this time to test out if it really does happen when You wipe from phone. Which it did happen and again repeated my steps. I guess I would like entropy or someone with more knowledge than me help me answer these mind boggling questions.
1. Is it possible my phone is sorta unique of the soft brick/wipe phone routine?
2. I downloaded the app from chain fire that detects if your emmc chip is one of the unlucky ones who have the bug or whatever and I do have the chip
3.How is it possible That the carrier label text is still there after so many wipes and rom flashes
4. I pretty sure I have not done anything to the boot loaders unless the roms I flash has them (which I think they don't)
I hope I explain my situation good. Again this is not a rant or troll or a customer support tread I clearly Understand the dangers of flashing and rooting Thanks for reading
p.s remove the picture because apparently my screenshot is offensive
Well that was a mouthful. LOL.
What are you using to wipe the phone? CWM or Factory data reset in settings?
Phone wipe in settings
Sent from my SAMSUNG-SGH-I777 using xda premium
chibixzero said:
Phone wipe in settings
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Well there's your problem. Use wipe in CWM.
Yeah but I guess my whole dilemma was why do I always get soft bricks even though I'm not on att leak crazy leak ics
Sent from my SAMSUNG-SGH-I777 using xda premium
chibixzero said:
Yeah but I guess my whole dilemma was why do I always get soft bricks even though I'm not on att leak crazy leak ics
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
1. You use rom manager
2. You use the factory reset in settings
3. You pull the battery in the middle of flashes
Why are you using Odin when you have cwm? Are you not making nandroids before flashing? Do you know how to boot to recovery from a boot loop?
I suggest you read a whole lot more about flashing and recovery before you do anymore. Because a lot of what you posted sounds like it could've been avoided had you followed any of the guides.post on xda
I can't get into cmw after the reset ebcouse phone won't boot into cwm so I have use Odin because I can only put phone in download mode
Sent from my SAMSUNG-SGH-I777 using xda premium
chibixzero said:
I can't get into cmw after the reset ebcouse phone won't boot into cwm so I have use Odin because I can only put phone in download mode
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Like he said.... do not use the reset within settings as it will soft brick everytime.
shoman94 said:
Like he said.... do not use the reset within settings as it will soft brick everytime.
Click to expand...
Click to collapse
I actually didn't know this, I had just never tried using the settings reset. Thanks for the heads up. BTW, does it soft brick even if you don't flash a new ROM? Or only when you change ROMs after doing a settings reset?
karate104 said:
I actually didn't know this, I had just never tried using the settings reset. Thanks for the heads up. BTW, does it soft brick even if you don't flash a new ROM? Or only when you change ROMs after doing a settings reset?
Click to expand...
Click to collapse
When using a custom ROM. If you are using what came with the phone or is updated officially via ATT then you may use it without issue.
OK . First, don't use rom manager. As already stated. And second, make sure to do FULL wipes between flashing different roms. This includes /system, data, cache, dalvik, and running the kernel cleaning script for good measure. That should always leave u with a fresh install.
Sent from my SGH-I777 using Tapatalk 2
It does it even with the stock root one I use to get back into flashing also the Damm carrier txt still there I'm currently using the jb leak how is that possible
Sent from my SGH-I777 using xda premium
It will do it on a stock rooted rom as well..
*TGFY FTW*
chibixzero said:
It does it even with the stock root one I use to get back into flashing also the Damm carrier txt still there I'm currently using the jb leak how is that possible
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
TEXASMADE1978 said:
It will do it on a stock rooted rom as well..
*TGFY FTW*
Click to expand...
Click to collapse
C'mon guys... if you are rooted you are NOT stock.
There is no way that this would keel happening if u do a full wipe .
Sent from my SGH-I777 using Tapatalk 2
Thanks for the info shoman never really though I about it rooted stock being not fully stock. I guess I can do a control test and run an actual stock and see if it will soft brick.
I just think uts a bit weird my made in China phone has or suffers these things.
Sent from my SGH-I777 using xda premium
chibixzero said:
Thanks for the info shoman never really though I about it rooted stock being not fully stock. I guess I can do a control test and run an actual stock and see if it will soft brick.
I just think uts a bit weird my made in China phone has or suffers these things.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Why is it weird? The issues you're having is all user error. Nothing to do with the phone.
BROKKANIC said:
Why is it weird? The issues you're having is all user error. Nothing to do with the phone.
Click to expand...
Click to collapse
I'm going on a limb and say it's not a lot of user error, from what I seen and read in these forums its about hardware and user.
Sent from my SGH-I777 using xda premium
Crap, I did not mean to thank you; I meant to quote you.
chibixzero said:
I'm going on a limb and say it's not a lot of user error, from what I seen and read in these forums its about hardware and user.
Click to expand...
Click to collapse
You can't start talking about hardware problems until you eliminate all user error.
mattdm said:
Crap, I did not mean to thank you; I meant to quote you.
You can't start talking about hardware problems until you eliminate all user error.
Click to expand...
Click to collapse
Very true,
Sent from my SGH-I777 using xda premium
Hi there!
I just got a shiny new Xperia U and proceeded to connect to Wi-Fi, only to discover that it will not connect entirely, instead giving me "Limited Conectivity".
Now, I've been searching all over the Internet for the past few days and have found many users with similar problems (and a whole bunch of solutions that didn't work). Basically what's going on is that the DHCP is giving me a 169.254.xx.xx adress instead of a 192.168.xx.xx as it should. This happens on ALL routers. I've managed to get internet at work by using a static IP and setting the DNS manually, but then that same solution didn't work at home (work is WPA, home is WEP, not sure if that's the reason). And in any case, setting up DNS for every Wi-Fi connection is not really a plausible solution (public Wi-Fi spots ain't gonna tell you their DNS).
So, that's as far as I've managed to get. I've downloaded some of those Wi-Fi fixer apps but they don't work. I've been trying everything short of rooting the device (haven't done it yet, never had a Smartphone before and I rather not go too deep unless strictly necesary).
Anyway, that's my problem. If anyone can give me a hand, I'd be most grateful.
And finally tech specs:
Android 4.0.4
Model number: ST25a
Build number: 6.1.1.B.1.10
Thanks in advance!
Wild_Marker said:
Hi there!
I just got a shiny new Xperia U and proceeded to connect to Wi-Fi, only to discover that it will not connect entirely, instead giving me "Limited Conectivity".
Now, I've been searching all over the Internet for the past few days and have found many users with similar problems (and a whole bunch of solutions that didn't work). Basically what's going on is that the DHCP is giving me a 169.254.xx.xx adress instead of a 192.168.xx.xx as it should. This happens on ALL routers. I've managed to get internet at work by using a static IP and setting the DNS manually, but then that same solution didn't work at home (work is WPA, home is WEP, not sure if that's the reason). And in any case, setting up DNS for every Wi-Fi connection is not really a plausible solution (public Wi-Fi spots ain't gonna tell you their DNS).
So, that's as far as I've managed to get. I've downloaded some of those Wi-Fi fixer apps but they don't work. I've been trying everything short of rooting the device (haven't done it yet, never had a Smartphone before and I rather not go too deep unless strictly necesary).
Anyway, that's my problem. If anyone can give me a hand, I'd be most grateful.
And finally tech specs:
Android 4.0.4
Model number: ST25a
Build number: 6.1.1.B.1.10
Thanks in advance!
Click to expand...
Click to collapse
Do update to ICS B.89. It has an updated baseband, which should solve the problem
Sent from my Xperia U using xda app-developers app
satya-1998 said:
Do update to ICS B.89. It has an updated baseband, which should solve the problem
Click to expand...
Click to collapse
Ok, and um... how do I do that? The Sony software (PC companion, the one I used to update from 2.3.7) says I'm up to date. I'm going to try the Sony updater, maybe that will download the propper one.
(for reference, baseband version is u8500-49020905-P2H_EC01, I assume this is what you mean the update will update and fix)
EDIT: tried with Sony Updater. The thing reinstalled everything, erased my data (not much data really but I'd have liked to keep it) and then installed B1.10. I'm at a loss here.
Wild_Marker said:
Ok, and um... how do I do that? The Sony software (PC companion, the one I used to update from 2.3.7) says I'm up to date. I'm going to try the Sony updater, maybe that will download the propper one.
(for reference, baseband version is u8500-49020905-P2H_EC01, I assume this is what you mean the update will update and fix)
EDIT: tried with Sony Updater. The thing reinstalled everything, erased my data (not much data really but I'd have liked to keep it) and then installed B1.10. I'm at a loss here.
Click to expand...
Click to collapse
Download Flashtool and the B.89 FTF from the development section and flash it
Sent from my Xperia U using xda app-developers app
satya-1998 said:
Download Flashtool and the B.89 FTF from the development section and flash it
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Oh. Mmm.. ok I'll try. Bit sacred of ****ing up and bricking though. Oh well, how hard can it be? (did I mention I'm a complete noob at this? I'm a complete noob at this)
Wild_Marker said:
Oh. Mmm.. ok I'll try. Bit sacred of ****ing up and bricking though. Oh well, how hard can it be? (did I mention I'm a complete noob at this? I'm a complete noob at this)
Click to expand...
Click to collapse
Chill bro, were here to help
Sent from my Xperia U using xda app-developers app
satya-1998 said:
Chill bro, were here to help
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Thanks man. Apreciate the effort.
I'm trying to find the firmware download. All I see is ROMs. That's not it, it it? Or should I just put a ROM with that latest firmware? It's all very confusing.
Edit: ok, I THINK I found it. Xperia U (ST25i)_6.1.1.B.1.89 ICS 4.0.4_Tim Italy By Shisma.ftf that should be it. 400 Megs.
Edit2: Ok, did that. Baseband and firmware are updated and... nope, still "Limited Conectivity" with IP 169.254.xx.xx
Wild_Marker said:
Hi there!
I just got a shiny new Xperia U and proceeded to connect to Wi-Fi, only to discover that it will not connect entirely, instead giving me "Limited Conectivity".
Now, I've been searching all over the Internet for the past few days and have found many users with similar problems (and a whole bunch of solutions that didn't work). Basically what's going on is that the DHCP is giving me a 169.254.xx.xx adress instead of a 192.168.xx.xx as it should. This happens on ALL routers. I've managed to get internet at work by using a static IP and setting the DNS manually, but then that same solution didn't work at home (work is WPA, home is WEP, not sure if that's the reason). And in any case, setting up DNS for every Wi-Fi connection is not really a plausible solution (public Wi-Fi spots ain't gonna tell you their DNS).
So, that's as far as I've managed to get. I've downloaded some of those Wi-Fi fixer apps but they don't work. I've been trying everything short of rooting the device (haven't done it yet, never had a Smartphone before and I rather not go too deep unless strictly necesary).
Anyway, that's my problem. If anyone can give me a hand, I'd be most grateful.
And finally tech specs:
Android 4.0.4
Model number: ST25a
Build number: 6.1.1.B.1.10
Thanks in advance!
Click to expand...
Click to collapse
Did you tried any other WiFi networks? From friends networks or some other free networks?
From my XPERIA U JB
sonyfan45 said:
Did you tried any other WiFi networks? From friends networks or some other free networks?
From my XPERIA U JB
Click to expand...
Click to collapse
Yeah, I latched onto some free networks that I found around, same issue, Limitede Conectivity with 169.254 IP.
Wild_Marker said:
Thanks man. Apreciate the effort.
I'm trying to find the firmware download. All I see is ROMs. That's not it, it it? Or should I just put a ROM with that latest firmware? It's all very confusing.
Edit: ok, I THINK I found it. Xperia U (ST25i)_6.1.1.B.1.89 ICS 4.0.4_Tim Italy By Shisma.ftf that should be it. 400 Megs.
Edit2: Ok, did that. Baseband and firmware are updated and... nope, still "Limited Conectivity" with IP 169.254.xx.xx
Click to expand...
Click to collapse
Hmm, it may be hardware then. Can you try CM9?
Sent from my Xperia U using xda app-developers app
satya-1998 said:
Hmm, it may be hardware then. Can you try CM9?
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
CM9? Not sure what that is.
It COULD be hardware, I've seen many people complaining about the same thing with Xperia phones. Even on the Sony forums (and Sony's response is always "check the router"). But since other people don't have this isuue, I'm guessing it's gotta be solvable by software.
I fear that if it's the model and if I just return it, they'll give me another one and it will have the exact same problem
Edit: ok, found that CM9 means a custom ROM. I guess after installing a firmware, installing a ROM shouldn't be too much of a problem (even if I don't fully understand the whole thing). Will try. Any tips?
Edit2: oh dear god, I just went to the list here on XDA, there's so many! I thought it was just one! Um... help? I'm completely lost here.
Okay, CM9 is AOSP android ( the pure android, without Sony's framework or addons) with some extra features. Actually not all xpu models suffer from the problem you describe. My suggestion is that you exchange it for a new model. But if you want to try cm9, pm me. I'll give a detailed guide
Sent from my Xperia U using xda app-developers app
This is shiny new under warranty? Why not take it back to service center before doing things that may break warranty? (Just my opinion).
xGO / GB.184 / Munjeni.v6 / BLUL / Debloated
androidmeda said:
This is shiny new under warranty? Why not take it back to service center before doing things that may break warranty? (Just my opinion).
xGO / GB.184 / Munjeni.v6 / BLUL / Debloated
Click to expand...
Click to collapse
Yes, shiny new under warranty. I'm going to take it there tomorrow. Haven't decided if I'm gonna root it or not. I mean... what's more likely? That it's a software problem and can be solved by instaling custom ROM? Or that it's a hardware problem and I should ask for another one? What are the chances that a new one WILL have working Wi-Fi?
I'ts been a crazy week trying to sort this thing out. I'm completely lost and willing to do anything. But yeah maybe I shouldn't jump into rooting if changing is easy (but WILL it be easier? I'll know that tomorrow when visiting my carrier I suppose).
Typical software developer, my frist instinct was to try and solve it myself
Quick solutions...
Flash the lastest stock ROM using flashtool, you know, download and install the program, download the ROM, put in firmware folder, click at the thunder icon, choose flashmode pick the ROM and follow screen instructions.
If doesn't work, go for your warranty.
Any question just ask.
EDIT: You need to install drivers for flashing, is at drivers folder, you can search a tutorial for flashtool.
Sent from my MT27i using xda premium
manudo said:
Quick solutions...
Flash the lastest stock ROM using flashtool, you know, download and install the program, download the ROM, put in firmware folder, click at the thunder icon, choose flashmode pick the ROM and follow screen instructions.
If doesn't work, go for your warranty.
Any question just ask.
EDIT: You need to install drivers for flashing, is at drivers folder, you can search a tutorial for flashtool.
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Yes, that's what we've tried (read rest of thread). I flashed the latest firmware, with the updated baseband. Didn't work.
Then read the last quick solution.
Sent from my MT27i using xda premium
manudo said:
Then read the last quick solution.
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
heh, yeah, I know. I'm gonna do that tomorrow. If new phone doesn't work, I'll try the unlock and CM9 thing.
Good luck.
Sent from my MT27i using xda premium
manudo said:
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Damn you guys and your "Sent from phone" signatures. That just makes me more jealous