Hello everyone
i was trying to install jjhybrid on my Neo ( locked bootloader ) but i got stuck on installing CWM Recovery .
My steps
1)updated with ICS stock from SEUS
2) flashed 4.0.3 with flashtool
3) rooted with doomlord
4) flashed back 4.0.4
phone is working and i got superuser so i think everything wents smooth till here..
I downloaded x-parts and tried to install CWM Recovery , that's where i started having my issue.
CWM folder doesn't get created on SD
Under superuser i can only see X-parts
Can't both to recovery in any way , tried the button in the app ( x-parts ) , volume down , tapping screen , noone works.
Reading the app forum it seems that is a bug with last version .. V7 , and a fix is still not out.
I found that i could install CWM-5.0.2.7-nAa-r2 on ICS even if it was made for GB , ( correct me if i'm wrong ) using the CWM Install as described here : http://forum.xda-developers.com/showthread.php?t=1364509
but unfortunately i can't download that .rar mediafire tells me : Access Denied
Downloads are not allowed from this Account. If you think that you should have access to this file, please contact support.
I even tried registering , but didn't help
i also made a factory reset and re-installed x-parts ,
also one thing to notice is that when my phone starts there is no blue led when sony logo is on screen
so.. my questions are :
1) what went wrong ? i assume that once i got superuser all of the above steps were right.. ( 4.0.4 to 4.03 to 4.04 etc )
2) is it correct that i can install an ICS based rom ( jjhybrid 3.2 ) using CWM-5.0.2.7-nAa-r2
if yes , could any of you help me understand what is preventing me from downloading the installer ?
Correct me if i said something wrong or just point me to another solution if there is one ,
Thx a lot
Did you flash the recommended kernel ?
try this..should work..
http://forum.xda-developers.com/showpost.php?p=19341487&postcount=21
or just flash a kernel ..custom kernels have cwm pre installed..problems with these are very very rare..
and blue led is for fastboot mode.. and it depends on the kernel you install,whether you get that light during startup or not..
solution: flash the recommended kernel for the rom..no need to install cwm separately..
then press vol down during boot,go in and wipe,install rom..thats all
follow this page...really helping
http://forum.xda-developers.com/showthread.php?t=1673489
Related
hi guys.,
ive managed to root my fone./
'now it is
4.0.3
4.1.a.0.562
i have rooted my fone. i can see superuser also.
what i did next was placing the rom in my sd card. and then i installed rom manager fromthe android market.
http://forum.xda-developers.com/showthread.php?t=16039190 this is the rom i downlaoded.
i rebooted my phone and went to the recovery console and chose to install the rom,
did it. restarted the phone and it hung at the sony logo.
I think the rom you try to install is not compatible with "Rom Manager" instead you had to try CWM, but Now you should repair your phone using SEUS to recover the original rom, and then root it again, install CWM and then you may try your custom Rom, one more thing to note, if the custom rom required any specific kernel, then you have to install the custom kernel 1st.
any other rom which is simple to test on the neo -v?
is there any rom that u can recomemd that i can just dump into my sd card and use it to test for the tiume being?
as in. ..
i download the rom..
i reboot the phome to recovery mode.
then i choose the zip file to install and thats all about it
i just wanna get tryu to see if it works.
i dont understand this kernal stuff.
You already asked this here: http://forum.xda-developers.com/showpost.php?p=27478508&postcount=15 thread closed.
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
digar4o said:
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
Click to expand...
Click to collapse
AOKP is not stock rom..
so its kernel is also not based n stok rom...thats why you got bootloop...
just download kernel which is based on sock rom like trancsend kernek...or phantom...
if you have jb then experimenatal kernel will be best....
and use flashtool to flash kernel...it is the easiest way to flash kernel..
all this kernels are prerooted and has cwm 6.x.x recovery.....
you will get this kernels in devlopment section....
Thank you!
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
digar4o said:
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
Click to expand...
Click to collapse
Most kernels nowadays have light notification or vibration or borh for the time you need to press the volume button for cwn, if yours does you only need to press it once within 3 seconds.
hi all i m really looking for help as i am loosing my hope ,first my phone detail
GT-I9100,
2.3.5,
baseband-I9100XXKF1
kernal-2.6.35.7-I9100XXKI3-CL577579
gingerbread.jpkj2..
.now the problem is very wired,i have rooted my phone becoz i see superuser and i have CWM version 3.15 installed,have Rom manager installed but there is no way i can install JB or kitkat ..i tried almost all steps but the one place i always fail is when i try to install clockwork recovery for gt-i9100 via Odin my phone doesn't boot and shows the main screen and exclamation mark then i used a kernel flash as mention in one of the forum to reboot again..
I am amazed to see that when i go into the recovery mode i don't see all the option just 4 general option and that gives me an idea that i dont have CWM installed but then why in my icons i have CWM?? i am confused...i have tried so many times to flash it but but my phone gets soft-brick and again i flash kernel to boot into my device.i am really worried to do any more steps as i feel i will brick my phone now
..my only question is can i install JB,kitkat or any update on this device...if yes then can any one who got my issue can help me one first and last time to get it done...please help:crying:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
stefan254235435235411354 said:
hellow guys !
recently i flashed some roms on my GT-S6310....no problem whit them....everthing worked perfectly (just to compare them)
so.... i flashed a stock rom on my phone to apply a theme....everything went good....how i expected my custom recovery image was replaced whit the stock one ....... so far so good....but when i try to flash via Odin the same CWM it show me "pass" but when i boot into recovery it appear the stock one
in that way i tried a milion of methods to flash the custom one but they wasn't work
even the "root" didn't worked :crying:
now i'm stack into the stock rom , whitout any way to escape
please guys help me to understand why it happened , and how to resolve it
Click to expand...
Click to collapse
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
es0tericcha0s said:
Don't let it auto reboot after the recovery flashes. Either uncheck auto reboot or just hit the combo for recovery when the phone reboots. Many newer Samsung phones have a script that reinstalls the original recovery if it realizes that you have changed it. You have to install another rom or root it and remove the script and reflash the recovery and it'll stick if you just want stock rooted.
Click to expand...
Click to collapse
didn't worked...... after i flash the recovery (i'm in download mode) i boot directly into recovery.... the same problem
try to instal the recovery via rom manager.....seems to work.....but when i want to boot from rom manager into recovery it show me an error ("an error occurred while attempting to run privileged commands !" )
what should i do now ?
http://galaxyyoungs6312.blogspot.com/2014/01/clockworkmod-recovery-for-galaxy-young.html
6310 + 6312 use the same recovery.
yeah....but i tried that rooting method and it didn't work....
maybe i can flash a new rom from ADB but i can't pass the signature verification
any ideas ?
Well I can tell from your pictures that you didn't follow the suggestion of trying SuperSU, but that might not help anyway. That Framaroot version is an older one. Get the updated version from here: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 and use SuperSU instead of Superuser. Sometimes you have to run it a couple times before it'll go through. Reboot in between tries. Here are better instructions for the rest of the process:
http://forum.xda-developers.com/showthread.php?t=2460029
man ...didn;t work... ... tried at least 5 times .....
or....i can flash a rom from ADB but i can't pass the signature verification....
a have an ideea ....maybe i can flash via odin a rom whit a custom recovery ...from there i can flash an old backup of mine .....it's good to proceed right that ?
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Try flashing 4.4 rom
Sent from my SM-N9005 using XDA Free mobile app
do you a full wipe every rom you try to flash ,it doesn;t work like that ,and search in forum there's a guide how to flash ,at least can you enter in recovey mode or download mode now ?
If you want to remove binary count search for triangle away
ok i will try flash to 4.4 but wait please a few minutes, i just uploading vid on youtube to show you all that "working" rom, i know how installing roms but its dont work, i know how to wpie and when do it bus seorusliy it not work...
and to use triangle away my phone must working, and thats problem.. i will show you that on vid just wait
and yes ofcourse i can enter in download mode and in cwm, just i say its only one rom with can boot.. stock and other roms stuck on sign "samsung i9300" stock roms stops at samsung logo and one of cyanogenmod starts up almost normal (u see what is wrong in vid) and is error with com.android.phone
VID is avalibe in first post
try to redownload zip file and try again ...maybe it should work . Happens to me once the same error ,i just rebooted in recovery mode ,did a wipe dalvik cache/ cache a factory reset and all went fine .
also you can try this https://www.youtube.com/watch?v=1iCq7fSqIqk (read the comments also)
switelolo124 said:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Click to expand...
Click to collapse
You can download this ROM. It is 4.3 for Poland (Plus)
Please read the guides on how to flash properly. If you flash the wrong way, then you can end in trouble.
did this Rom has kernel inside ?
and guys... i KNOW HOW INSTALLING ROM, i just write like that to make it shorter
@edit
not working i told u guys its not working only cm11 without wiping plus stock aroma rom kinda working...
did is some way to installing firmware with odin but emerygency mode ? i doing that in galaxy s2 mini but i know its diffrend samsung.. but maybe.. ?
Did u try flashing rom without sd card ??
Sent from my SM-N9005 using XDA Free mobile app