Related
I'm running the latest version of the Resurrection remix, I rooted it before using CF-ROOT which was CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5. I used the official rom before, then used that CF-ROOT then installed Resurrection remix.
Now when I go into CWM manager it says This version of CWM manager should be used with cf-root v5.0 or newer. but I'm sure I rooted with version 5.4. What should I do to fix it? Everything works fine its just this is nagging me
Would I be able to re-root it as normally and keep my ROM?
A new Rom implements a new Kernel
i dont know which one Resureection uses all i know its a AOKP Rom.
You can try CF Root but i dont know if it Supports AOKP Roms.
Well check your Phone info in Settings it should say which Kernel is used atm.
leechseed said:
A new Rom implements a new Kernel
i dont know which one Resureection uses all i know its a AOKP Rom.
You can try CF Root but i dont know if it Supports AOKP Roms.
Well check your Phone info in Settings it should say which Kernel is used atm.
Click to expand...
Click to collapse
My kernel is 3.036-FLUXI-XX.02, what should I do in regards to the error? Basically my CF-ROOT needs the latest version, anything that could be done? Thank you.
So you are not on CF Root anymore beacause Resurrection Rom flashed with Fluxi Kernel..
Well Fluxi should support CWM - but i dont know if its the same as in CF
ClockworkMod Recovery xxTouch 5.5.0.4 complete Customized & Rebuilt
Click to expand...
Click to collapse
and i still dont know if CF supports AOSP Roms
sorry
Relemar said:
My kernel is 3.036-FLUXI-XX.02, what should I do in regards to the error? Basically my CF-ROOT needs the latest version, anything that could be done? Thank you.
Click to expand...
Click to collapse
try flashing the latest siyah kernel v3.3.2 and u will not have the 'This version of CWM manager should be used with cf-root v5.0' message Nagging u any more
Relemar said:
My kernel is 3.036-FLUXI-XX.02, what should I do in regards to the error? Basically my CF-ROOT needs the latest version, anything that could be done? Thank you.
Click to expand...
Click to collapse
If you flash a different kernel (in your case Fluxi Kernel), CWM Manager may remain installed. However, functions may not work, because they need kernel compatibility! Just flash Siyah Kernel 3.3.2 & CWM Manager will recognize it again...cheers
Download from here:
http://www.gokhanmoral.com/
Hi mate,
Is Resurrection Remix the ROM or the Kernel? I'll try this Siyah now What will actually change?
Thank you! :victory:
Resurrection is the ROM
just in case, this one is for SGS2 ;-) http://www.gokhanmoral.com/gm/2012/06/12/siyahkernel-sgs2-v3-3-2/
http://forum.xda-developers.com/showthread.php?t=1555259
http://forum.xda-developers.com/showthread.php?t=1658647
All done, worked a treat. God knows what's happened but it's working, it's all still so confusing haha. Thanks to everyone involved.
Relemar said:
All done, worked a treat. God knows what's happened but it's working, it's all still so confusing haha. Thanks to everyone involved.
Click to expand...
Click to collapse
Congratulations mate, You just add beauty (Siyah) to the beast (RR ROM)
Any idea why System UI keeps crashing when I try and plug my phone into my PC?
Hey can anyone provide me the link with the stock cm 10 kernel, i was on cm10 but then i flashed a different kernel n i wanna go back to the cm10 stock kernel. how can i do this? does anyone have the link to it? thanks
Flash CM10 again without wiping; the kernel will overwrite your existing kernel. Once you've done that, get kTool from Google Play (and buy Hellcat a beer) & dump the CM10 kernel to your internal SD card.
That way, in the future, if you try out other kernels & want to go back to to the CM10 kernel you'll be able to flash just the kernel (with Mobile Odin or Odin) without having to flash the whole rom (whenever you flash a new CM10 build, do this step immediately afterwards so you have a copy of the latest kernel).
Or....you could ask in the CM10 discussion thread, tho you'd be able to do the above 50 times in the time you'd wait to get an answer/a link to just the kernel
Nice, didn't realise there was such app that can do that. Thanks
Of and do you think it will work with stock Ics kernel? I don't see why not tbh
Sent from my sexy Galaxy SII
Yep. You can dump any kernel with kTool & then flash the kernel with Odin/Mobile Odin.
*boy*racer* said:
Nice, didn't realise there was such app that can do that. Thanks
Of and do you think it will work with stock Ics kernel? I don't see why not tbh
Sent from my sexy Galaxy SII
Click to expand...
Click to collapse
Hello people, this is the info of my galaxy s 2 -
(Go down down )
Which kernal i need to install to flash a root and than rom?
Also do i need to change the kernal all the time before i flash new rom?
Thanks.
FAQs
eBay's said:
Hello people, this is the info of my galaxy s 2 -
(Go down down )
Which kernal i need to install to flash a root and than rom?
Also do i need to change the kernal all the time before i flash new rom?
Thanks.
Click to expand...
Click to collapse
Hi There!
Best place to start is the FAQs http://forum.xda-developers.com/showthread.php?t=2156592
You don't need to flash a seperate kernal with each new ROM, as they are included.
k0rrupt10n said:
Hi There!
Best place to start is the FAQs http://forum.xda-developers.com/showthread.php?t=2156592
You don't need to flash a seperate kernal with each new ROM, as they are included.
Click to expand...
Click to collapse
Just read it already XD
Can you give me a kernal for the information i added uo there?
Since the links in thr faq are too old. And i dont know which kernal use CF-Root or Siyah...
Best thing is to read and learn what kernel you need.
alliance 7.3
dorimanx 8.16
nels1
eBay's said:
Just read it already XD
Can you give me a kernal for the information i added uo there?
Since the links in thr faq are too old. And i dont know which kernal use CF-Root or Siyah...
Click to expand...
Click to collapse
The root task is done by both of the kernels indeed. But:
If you just want to root your device CF-Root will do the thing.
Siyah or Siyah related kernels (DorimanX Kernel for example) and some others are more advanced kernels that
give you the ability to adjust some settings through an app (STweaks) that is installed with the kernel.
blackprophecy said:
The root task is done by both of the kernels indeed. But:
If you just want to root your device CF-Root will do the thing.
Siyah or Siyah related kernels (DorimanX Kernel for example) and some others are more advanced kernels that
give you the ability to adjust some settings through an app (STweaks) that is installed with the kernel.
Click to expand...
Click to collapse
Can you tell me which settings?
And for your opnion which one to install? @blackprophecy
eBay's said:
Can you tell me which settings?
And for your opnion which one to install? @blackprophecy
Click to expand...
Click to collapse
DorimanX Kernel
Siyah Kernel
The best way to find out what you can do with the kernels is to read their threads.
It's to much to explain. Just as an example: Change CPU frequency and volting, enable different setting profiles for
improved battery life and much more.
The kernel I like most is DorimanX but you have to be more experienced because of a lot of different options.
Siyah, which is the base of the DorimanX, is more compact with the settings and easier to learn.
No matter what kernel you use, make sure your rom is supported. (Stock or Custom, AOKP / CM Base?)
blackprophecy said:
DorimanX Kernel
Siyah Kernel
The best way to find out what you can do with the kernels is to read their threads.
It's to much to explain. Just as an example: Change CPU frequency and volting, enable different setting profiles for
improved battery life and much more.
The kernel I like most is DorimanX but you have to be more experienced because of a lot of different options.
Siyah, which is the base of the DorimanX, is more compact with the settings and easier to learn.
No matter what kernel you use, make sure your rom is supported. (Stock or Custom, AOKP / CM Base?)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2186805 < this RoM i wanna flash.
eBay's said:
http://forum.xda-developers.com/showthread.php?t=2186805 < this RoM i wanna flash.
Click to expand...
Click to collapse
If you just want to flash a kernel because you want to get root and install a custom rom than CF-Root is the best thing.
Every custom rom comes with it's own kernel that fits. Only if you want to get an advanced kernel you may flash one of these:
DorimanX or
Siyah vsync v4/5
in their modified versions for CM and AOKP based roms.
Do NOT flash these kernels as long as you are on a Stock based rom. It won't boot then.
Make sure you know how to install custom roms! Mostly described in the rom threads itself.
So you steps should be:
1. flash CF-Root via odin to get your phone rooted.
2. copy the zip file to sd card and flash the rom via recovery.
3. stay with the delivered kernel of the custom rom or flash another via odin or recovery if you want an advanced one.
blackprophecy said:
If you just want to flash a kernel because you want to get root and install a custom rom than CF-Root is the best thing.
Every custom rom comes with it's own kernel that fits. Only if you want to get an advanced kernel you may flash one of these:
DorimanX or
Siyah vsync v4/5
in their modified versions for CM and AOKP based roms.
Do NOT flash these kernels as long as you are on a Stock based rom. It won't boot then.
Make sure you know how to install custom roms! Mostly described in the rom threads itself.
So you steps should be:
1. flash CF-Root via odin to get your phone rooted.
2. copy the zip file to sd card and flash the rom via recovery.
3. stay with the delivered kernel of the custom rom or flash another via odin or recovery if you want an advanced one.
Click to expand...
Click to collapse
Last question -
Can you give me the last version of CF?
Also if i backup with titanuim how i restore it back? since no apps..
and can you write step by step of the root and custom rom(not that clear in jellybear)
Thankyou very much i really apprecite it!
*Delete*
eBay's said:
Last question -
Can you give me the last version of CF?
Also if i backup with titanuim how i restore it back? since no apps..
and can you write step by step of the root and custom rom(not that clear in jellybear)
Thankyou very much i really apprecite it!
Click to expand...
Click to collapse
Don't get me wrong, but I think It's better if you make your own experience with installing/flashing >>Instructions
Everything you need is explained here step by step. Won't take you that long to read through it think
If you don't know the difference between Stock and Custom, just use the forum search.
And I figured out that it's better to root via Siyah for you with this one Siyah for stock rom
For titanium i got no advice for you because I'm not experienced with it. But there should be some threads guiding you through.
when you don't get something in the tutorials you're free to ask here again. But for now good luck and have fun learning something about
your device
blackprophecy said:
DorimanX Kernel
Siyah Kernel
The best way to find out what you can do with the kernels is to read their threads.
It's to much to explain. Just as an example: Change CPU frequency and volting, enable different setting profiles for
improved battery life and much more.
The kernel I like most is DorimanX but you have to be more experienced because of a lot of different options.
Siyah, which is the base of the DorimanX, is more compact with the settings and easier to learn.
No matter what kernel you use, make sure your rom is supported. (Stock or Custom, AOKP / CM Base?)
Click to expand...
Click to collapse
blackprophecy said:
Don't get me wrong, but I think It's better if you make your own experience with installing/flashing >>Instructions
Everything you need is explained here step by step. Won't take you that long to read through it think
If you don't know the difference between Stock and Custom, just use the forum search.
And I figured out that it's better to root via Siyah for you with this one Siyah for stock rom
For titanium i got no advice for you because I'm not experienced with it. But there should be some threads guiding you through.
when you don't get something in the tutorials you're free to ask here again. But for now good luck and have fun learning something about
your device
Click to expand...
Click to collapse
Thankyou very much, i read it.
but i dont get something -
If i download the saiyah one instead the CF do i need to CWM recovery from this guide?http://wiki.cyanogenmod.org/w/Install_CM_for_i9100
eBay's said:
Thankyou very much, i read it.
but i dont get something -
If i download the saiyah one instead the CF do i need to CWM recovery from this guide?http://wiki.cyanogenmod.org/w/Install_CM_for_i9100
Click to expand...
Click to collapse
What you have to do is to flash this kernel via Odin Odin
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select .tar file you've downloaded (Siyah in this case)
- Put your phone in download mode (google it if you dno't know how to)
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)
after this steps your phone is rooted and then you can install your custom firmware.
blackprophecy said:
What you have to do is to flash this kernel via Odin Odin
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select .tar file you've downloaded (Siyah in this case)
- Put your phone in download mode (google it if you dno't know how to)
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)
after this steps your phone is rooted and then you can install your custom firmware.
Click to expand...
Click to collapse
by firemware you mean recovery right?
and the guide i gave its okay? and do i need 100% battery?
sorry for bothering
eBay's said:
by firemware you mean recovery right?
and the guide i gave its okay? and do i need 100% battery?
sorry for bothering
Click to expand...
Click to collapse
if you flash the Siyah kernel it automatically installs the a recovery. there is no need to install it separately.
you just have to download the zip file for your custom rom (Jelly Beer 4.18 in your case) and copy it to your external sd card.
then do this
blackprophecy said:
if you flash the Siyah kernel it automatically installs the a recovery. there is no need to install it separately.
you just have to download the zip file for your custom rom (Jelly Beer 4.18 in your case) and copy it to your external sd card.
then do this
Click to expand...
Click to collapse
THANKYOU VERY MUCH BRO!
Crap! i dont have sd card! only the memory with 16gb in my phone
No problem you can put the zip file to the internal sd card.
this will do it.
blackprophecy said:
No problem you can put the zip file to the internal sd card.
this will do it.
Click to expand...
Click to collapse
btw the siyha kernal 100% will work on the rom i have? look at the picture in the first message in the thread
blackprophecy said:
No problem you can put the zip file to the internal sd card.
this will do it.
Click to expand...
Click to collapse
btw the siyha kernal 100% will work on the rom i have? look at the picture in the first message in the thread
My phone just gets stuck in a black screen when I try to boot into recovery. It happend once a few days ago, and i soloved it by going again to stock by odin and rooting it again. It booted to recovery the first time, i flashed carbon rom nightly 26 and now when I try to update, it doenst boot again. What is happening?
Info+New Kernel/Recovery
francantabria said:
My phone just gets stuck in a black screen when I try to boot into recovery. It happend once a few days ago, and i soloved it by going again to stock by odin and rooting it again. It booted to recovery the first time, i flashed carbon rom nightly 26 and now when I try to update, it doenst boot again. What is happening?
Click to expand...
Click to collapse
Firstly: Please give more detailed information (which kernel do you use, which ROM did you use before the problem occurred?)
Secondly: It is possible that you can't acess recovery mode anymore when flashing new updates. Happens with CM 10.2 OTA Update right now. The solution would be to flash a new recovery using Heimdall (Open-Source ODIN alternative) [Didn't try that, but should theoretically work] or, mor simple, a new kernel. Dorimany v9.34 is suited perfectly for that. Download here: http://dorimanx.shine.sk/ .
H3llwar said:
Firstly: Please give more detailed information (which kernel do you use, which ROM did you use before the problem occurred
Secondly: It is possible that you can't acess recovery mode anymore when flashing new updates. Happens with CM 10.2 OTA Update right now. The solution would be to flash a new recovery using Heimdall (Open-Source ODIN alternative) [Didn't try that, but should theoretically work] or, mor simple, a new kernel. Dorimany v9.34 is suited perfectly for that. Download here: http://dorimanx.shine.sk/ .
Click to expand...
Click to collapse
Well, i used Carbon Rom for a few weeks, so that was definitly the rom. Talking about the kernel, I dont even know how to install one.. haha Now in kernel version it says..
3.0.64 CM gb07657a
[email protected] #1 (I dont know what kernel it is)
Yeah but even if I dont want to flash an update, just boot recovery, I cant. Have you any link to know about Heimdall? Or how to install Dorimany? Im a beginner I have to say.
Thanks
francantabria said:
Well, i used Carbon Rom for a few weeks, so that was definitly the rom. Talking about the kernel, I dont even know how to install one.. haha Now in kernel version it says..
3.0.64 CM gb07657a
[email protected] #1 (I dont know what kernel it is)
Yeah but even if I dont want to flash an update, just boot recovery, I cant. Have you any link to know about Heimdall? Or how to install Dorimany? Im a beginner I have to say.
Thanks
Click to expand...
Click to collapse
You installed a Kernel while rooting your phone: Its the .tar that you have to put into the PDA section in ODIN. There are Kernels with .tar and .zip: .tar files are only flashable using Odin while .zip files are flashed using the recovery just like you flash ROMs. I guess your Kernel is a custom CM Kernel (CM for Cyanogen Mod). Carbon ROM is probably based on CM. There is currently no other workaround to get your recovery back then flashing a new kernel/recovery. I am currently working on an easy workaround for this problem, but it will take a while.
Dorimanx is downloadable here http://dorimanx.shine.sk/ and should be compatible: Just flash it like you did when rooting your phone in the beginning, just with Dorimanx .tar in PDA. Recovery should work again afterwards.
My mistake: It's Dorimanx, not Dorimany
Hit Thanks and just ask if you need additional help!
H3llwar said:
You installed a Kernel while rooting your phone: Its the .tar that you have to put into the PDA section in ODIN. There are Kernels with .tar and .zip: .tar files are only flashable using Odin while .zip files are flashed using the recovery just like you flash ROMs. I guess your Kernel is a custom CM Kernel (CM for Cyanogen Mod). Carbon ROM is probably based on CM. There is currently no other workaround to get your recovery back then flashing a new kernel/recovery. I am currently working on an easy workaround for this problem, but it will take a while.
Dorimanx is downloadable here http://dorimanx.shine.sk/ and should be compatible: Just flash it like you did when rooting your phone in the beginning, just with Dorimanx .tar in PDA. Recovery should work again afterwards.
My mistake: It's Dorimanx, not Dorimany
Hit Thanks and just ask if you need additional help!
Click to expand...
Click to collapse
Yeah, I remember.. it was siyah kernel.
So in your opinion I should flash Dorimanx by Odin then? No other way to fix isnt it? and.. in dorimanx page, which one of all them should I download?
francantabria said:
Yeah, I remember.. it was siyah kernel.
So in your opinion I should flash Dorimanx by Odin then? No other way to fix isnt it? and.. in dorimanx page, which one of all them should I download?
Click to expand...
Click to collapse
1. Yes you should
2. Not right now, maybe in the future, flashing recovery.img using Heimdall would probably help, but I didn't try it myself and using Heimdall is quite complex
3. In General: The newest .tar (9.34/8.34) as you can't use .zip files
When you want to use Stock Samsung ROM: Version 8
When you want to use CM/AOKP based ROM: Version 9
Remember: No ICS Support!
Hit Thanks and just ask if you need more help.
H3llwar said:
1. Yes you should
2. Not right now, maybe in the future, flashing recovery.img using Heimdall would probably help, but I didn't try it myself and using Heimdall is quite complex
3. In General: The newest .tar (9.34/8.34) as you can't use .zip files
When you want to use Stock Samsung ROM: Version 8
When you want to use CM/AOKP based ROM: Version 9
Remember: No ICS Support!
Hit Thanks and just ask if you need more help.
Click to expand...
Click to collapse
Ok.
But every aosp rom, like Carbon PA and these are based either in AOKP or CM, isnt it?
The newest one is 9/39, is that the one?
francantabria said:
Ok.
But every aosp rom, like Carbon PA and these are based either in AOKP or CM, isnt it?
Click to expand...
Click to collapse
CM & AOKP are actually based on AOSP, so Yes, every AOSP ROM should work.
H3llwar said:
CM & AOKP are actually based on AOSP, so Yes, every AOSP ROM should work.
Click to expand...
Click to collapse
I did what you said and after installing Carbon Rom again recovery is gone.. so I suposse it is Carbon problem. I will do it again and install a different rom
francantabria said:
I did what you said and after installing Carbon Rom again recovery is gone.. so I suposse it is Carbon problem. I will do it again and install a different rom
Click to expand...
Click to collapse
I agree, the problem results of the ROM: But you have to flash dorimanx after carbon because carbon replaces the current kernel with its own CM custom Kernel. It should work just fine with carbon when it's flashed after installing carbon.
I am a newbie regarding android roms and all that .. and I need help ..
As I see dual booting in galaxy S2 .. I was wondering if I can .. then after some study on this site .. I get to know how to root .. now my phone is rooted but dont have CWM installed .. I tried to flash CWM .. it starts CWM successfully .. but after rebooting it again it start samsung recovery .. so my question here is .. Can I just flash CWM nd then Siyah Kernel same time without rebooting between each flash .. and One thing is that can I use my Samsung original Rom (4.1.2) as primary Rom and other rom (Resurrection Remix) as secondary ???
-*-*-*-*
I have tried my self .. when flashing Siyah Kernel .. it says some thing like asserts ... or like that .. and failed to flash kernel ..
now what am I suppose to do for flashing Siyah kernel or any better kernel for dual booting ... ??
Samsung Galaxy S2 GT I9100
4.1.2
1) If you really want help, you need to use a better title than 'Need help. Plenty of people will not even bother to read your thread in the first place due to that alone (you're lucky I'm bored right now).
2) The reason CWM isn't persisting after you reboot is because recovery is baked into the kernel on the SGS2 & isn't a separate partition like other phones. So if you want permanent CWM, you need to flash a custom kernel.
3) If you flash Siyah on it's own, you will end up with a rooted phone + CWM & you can go from there. I suspect the reason you got those errors are you used the wrong build for the particular Android version you are running. If you want to make it easy for yourself, I suggest you read the first page of the Siyah thread carefully then download the Odin version you need for the Android version you're running (I forget which is which; haven't run Siyah for >12 mths) & flash that.
Yes, you can dual boot with Siyah. There are detailed instructions in the Siyah threads, and there have also been a multitude of dual boot how-to's written (search in both cases).
Siyah kernel issues (reply)
MistahBungle said:
1) If you really want help, you need to use a better title than 'Need help. Plenty of people will not even bother to read your thread in the first place due to that alone (you're lucky I'm bored right now).
2) The reason CWM isn't persisting after you reboot is because recovery is baked into the kernel on the SGS2 & isn't a separate partition like other phones. So if you want permanent CWM, you need to flash a custom kernel.
3) If you flash Siyah on it's own, you will end up with a rooted phone + CWM & you can go from there. I suspect the reason you got those errors are you used the wrong build for the particular Android version you are running. If you want to make it easy for yourself, I suggest you read the first page of the Siyah thread carefully then download the Odin version you need for the Android version you're running (I forget which is which; haven't run Siyah for >12 mths) & flash that.
Yes, you can dual boot with Siyah. There are detailed instructions in the Siyah threads, and there have also been a multitude of dual boot how-to's written (search in both cases).
Click to expand...
Click to collapse
-*-*-*-*
thanx bro for ur reply .. nd yeah U are ryt for title thing .. I realized the same thing after posting the issue .. yeah I have read the Kernel thread nd I have flashed with the ryt version ( latest) ""Siyah-s2-v6.0b5-CWM"" I think this is the latest version of Siyah I could get from the Siyah Kernel site for S2 ..
If I consider to flash Dorimanx .. I think this is also dual boot supported .. what u guys reccomend .. ???
V6.0b5 is the latest siyah kernel he made. For dualbooting I would recommend dorimanx 8.xx as you will be able to run a modded stock Sammy rom and a aokp/cm rom at the same time. ? if you use 9.xx dorimanx kernel you will only be able to run aokp/cm roms.
8.32 dorimanx is rock stable running both custom and modded stock roms imo.
reply
andrewwright said:
V6.0b5 is the latest siyah kernel he made. For dualbooting I would recommend dorimanx 8.xx as you will be able to run a modded stock Sammy rom and a aokp/cm rom at the same time. ? if you use 9.xx dorimanx kernel you will only be able to run aokp/cm roms.
8.32 dorimanx is rock stable running both custom and modded stock roms imo.
Click to expand...
Click to collapse
thanx mate .. with dormanx 8.32 I will be able to use stock samsung Jb ( primary) with other secondary rom .. ?? am I ryt ..
Yes you can pick any stock Rom but it needs to be running a modded updater script for the preload. Then custom or another modded stock rom in 2nd rom. Look up @Troubadour666 he's made many dualboot threads and is a nice guy. Speak to him on all things dualboot. Can't go wrong with his advice :thumbup:
reply
andrewwright said:
Yes you can pick any stock Rom but it needs to be running a modded updater script for the preload. Then custom or another modded stock rom in 2nd rom. Look up @Troubadour666 he's made many dualboot threads and is a nice guy. Speak to him on all things dualboot. Can't go wrong with his advice :thumbup:
Click to expand...
Click to collapse
thnx mate .. another confusion of modded script ..
gulty of being noob .. .. lol
em trying to contact Troubadour666 .. nd trying to see his posts .. hope I find what I need ..
Pm him or post on his thread you need a bit of help mate. I'm sure he'll help you out as we were all noobs once.
reply
andrewwright said:
Pm him or post on his thread you need a bit of help mate. I'm sure he'll help you out as we were all noobs once.
Click to expand...
Click to collapse
thnx buddy .. yeah em on my way ..
Dualbooting is very handy at times. I was flashing upto 5 times a day. And still had a stock rom for daily :thumbup:
reply
andrewwright said:
Dualbooting is very handy at times. I was flashing upto 5 times a day. And still had a stock rom for daily :thumbup:
Click to expand...
Click to collapse
.. yeah it seems fun too .. I am an old android user but didnt mess up with development things before ..
I have pm him .. lets see what he suggests ..
Hi,
managing cwm is not my best support
but /data/sec_data/ , YES
after 10 hours , i dont see [SOLVE] in title
where are U ? "absorbed" by your S2 ?
Troubadour666 said:
Hi,
managing cwm is not my best support
but /data/sec_data/ , YES
after 10 hours , i dont see [SOLVE] in title
where are U ? "absorbed" by your S2 ?
Click to expand...
Click to collapse
sorry for being late .. got my PC crashed .. so lil work for that ..
c0olmad said:
sorry for being late .. got my PC crashed .. so lil work for that ..
Click to expand...
Click to collapse
do you want help for PC too ?
i'm PCs maintainer too
Troubadour666 said:
do you want help for PC too ?
i'm PCs maintainer too
Click to expand...
Click to collapse
hahahahhahaha .. thanx .. but i can do these stuff like PC thing on my own ..
Hahaha. I understand
sendé par les ondes sorties de mon s2
Troubadour666 said:
Hahaha. I understand
sendé par les ondes sorties de mon s2
Click to expand...
Click to collapse
thnks Guys for ur great help ..
c0olmad said:
thnks guys for ur great help ..
Click to expand...
Click to collapse
[solved & closed] ??
Troubadour666 said:
[solved & closed] ??
Click to expand...
Click to collapse
SOLVED