Does someone one the easier way to root it?
SORRY!
I am too late back here!
Please use two step way to root LT26w.
http://forum.xda-developers.com/show....php?t=1834291
Don't use 5 step way. You will get stock in step 5.
After you root, You will get supersu instead superuser.
ri7672 said:
There is a way to root
http://www.mobile01.com/topicdetail.php?f=569&t=2854310&p=5#37604353
However, the way is too complicated.
Does someone one the easier way to root it?
Click to expand...
Click to collapse
impossible until now. I'm using acro s, and if we can not root in easier way, the phone may have some laggy, and temp is hot. If you don't want to unlock bootloader, just one way to do: follow your link on the #1
I've rooted my acro s mintues ago LOL
etjeremy said:
I've rooted my acro s mintues ago LOL
Click to expand...
Click to collapse
how did you root it? you followed the link in the first post?
yogiyogs said:
how did you root it? you followed the link in the first post?
Click to expand...
Click to collapse
yup,that's the only way to root without unlocking the bootloader
etjeremy said:
yup,that's the only way to root without unlocking the bootloader
Click to expand...
Click to collapse
thanks! however, it is written in chinese i did google translate but still quite hard to understand.
need "Arco HD(SO-03D) 2.3.7 FTF file" and "Arco S 4.0.4 FTF file"
Rooting steps are the same as XPERIA S rootkit http://forum.xda-developers.com/showthread.php?t=1737929
ri7672 said:
There is a way to root
However, the way is too complicated.
Does someone one the easier way to root it?
Click to expand...
Click to collapse
Just rooted my phone two days ago following this instruction. It works!!
Of note, I am using Flashtool v9.0.0 (the latest version) which is compatible.
I'm just wondering: How will the device be rooted when the bootloader is unlocked? Does this happen instantly or do I need to do it with the flashtool?
I have found there have way to unlock the BootLoader, but after we unlocked it, how can we root this phone? Hope some one develop Easy Recovery for this device!
chriscai1987 said:
I have found there have way to unlock the BootLoader, but after we unlocked it, how can we root this phone? Hope some one develop Easy Recovery for this device!
Click to expand...
Click to collapse
you can flash xs advanced stock kernel, it's included CWM, then flash super user, then flash again stock lt26w kernel. Because xs kernel can not use, only cwm can run. Remember copy superuser or flashable.zip to internal memory. SD card can not use.
pakroid said:
Just rooted my phone two days ago following this instruction. It works!!
Of note, I am using Flashtool v9.0.0 (the latest version) which is compatible.
Click to expand...
Click to collapse
Can some one who understands Japanese be kind enough to translate from first link by OP
and help us as well to root sony xperia acro s in ENG please
any developer/user who understands Japanese please help us
i will be grateful.
kingwicked said:
Can some one who understands Japanese be kind enough to translate from first link by OP
and help us as well to root sony xperia acro s in ENG please
any developer/user who understands Japanese please help us
i will be grateful.
Click to expand...
Click to collapse
i second that!
kingwicked said:
Can some one who understands Japanese be kind enough to translate from first link by OP
and help us as well to root sony xperia acro s in ENG please
any developer/user who understands Japanese please help us
i will be grateful.
Click to expand...
Click to collapse
that is Chinese(Mandarin), not Japanese.....
You can try this, the method should be effective to your devices(without unlock BL)
http://forum.xda-developers.com/showthread.php?t=1737929
The method of rooting acro s and acro hd were same and we just need to use acro s' 4.0.4 ftf instead of HD one.
Sent from my LT26w using xda app-developers app
etjeremy said:
The method of rooting acro s and acro hd were same and we just need to use acro s' 4.0.4 ftf instead of HD one.
Sent from my LT26w using xda app-developers app
Click to expand...
Click to collapse
Is the Acro S 4.0.4 ftf already in the CWM? If not, where can we get it?
Can somebody please upload 2 needed files for rooting precess to somewhere that i can download easier?
I have rooted LT26w. Because I'm Japanese live in Taiwan, I could read the original and #1, both ways.
( Original : rooting toolkit for XPERIA acro HD (ver1.0.1) KDDI IS12S / docomo SO-03D 両対応版 )
I want to correct a few problems in both of those.
Preinclination
1. Get the Flashtool
2. Get the modified rooting toolkit for XPERIA acro HD (ver1.0.1)
3. Get the XPERIA acro HD's ftf
4. Prepare original ROM's ftf, or get LT26w(6.1.A.1.58) ftf
5. Install LT26w's device driver to the PC. (Install PCC or get the driver, and so on)
Notice
1. Set the Settings - Display - Sleep : 30minutes
2. Check the Settings - Security - Unknown sources
3. Check the Settings - Developer options - USB debugging
4. Check the Settings - Developer options - Stay awake
5. Charge up LT26w more than 90%(Green lamp)
Operation
1. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing XPERIA acro HD's ftf.
Flashtool setting :
- check all of the Wipe column
- uncheck all of the Exclude column
- uncheck Misc column(No final verification)
2. Connects PC and LT26W by USB while pushing volume down key. Close the Flashtool when finished flashing.
3. Set up as "Notice"
4. Connects PC and LT26W by USB and executes step1.bat.
5. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing LT26w(6.1.A.1.58) ftf.
Flashtool setting :
- uncheck all of the Wipe column
- uncheck all of the Exclude column
- check Misc column(No final verification)
6. Turn on the power of LT26w, Connects PC and LT26w by USB and executes step2.bat.
7. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing LT26w(6.1.A.1.58) ftf.
Flashtool setting :
- uncheck all of the Wipe column
- uncheck all of the Exclude column
- check Misc column(No final verification)
8. Turn on the power of LT26w, Connects PC and LT26w by USB and executes step3.bat.
9. Execute step4.bat.
10. Execute step5.bat.
11. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing LT26w(6.1.A.1.58) ftf.
Flashtool setting :
- check all of the Wipe column
- check all of the Exclude column
- check Misc column(No final verification)
12. rooting finished. Install Superuser and Busybox (from Google play).
13. appreciate masters.
( なお、日本語での上記手順はこちら。 )
As for the routing, the way of here may be good. But I cannot read it. Also, seems that still there is a danger in this way (there is a possibility to be cannot charge-up ?).
And if you want to install CWM,
1. Access to "CWM Recovery for 2012 Xperia v02 リリース" and download "CWM Recovery for 2012 Xperia v02".
If you cannot found download link of "CWM Recovery for 2012 Xperia v02", get from here.
2. Extract the ZIP.
3. Connects PC and LT26w by USB and execute install.bat.
4. Appear "Finished!", finished the install.
5. appreciate masters.
( なお、日本語が読める方はこちらを参照して下さい。 )
About start-up of recovery, tap the screen during Sony logo display after the turn on.
Key operating method :
Up, Down : Vol+, Vol-
Enter : Camera shutter (not focus, need push deeply)
Back : Power
PotechTW said:
I have rooted LT26w. Because I'm Japanese live in Taiwan, I could read the original and #1, both ways.
( Original : rooting toolkit for XPERIA acro HD (ver1.0.1) KDDI IS12S / docomo SO-03D 両対応版 )
I want to correct a few problems in both of those.
Preinclination
1. Get the Flashtool
2. Get the modified rooting toolkit for XPERIA acro HD (ver1.0.1)
3. Get the XPERIA acro HD's ftf
4. Prepare original ROM's ftf, or get LT26w(6.1.A.1.58) ftf
5. Install LT26w's device driver to the PC. (Install PCC or get the driver, and so on)
Notice
1. Set the Settings - Display - Sleep : 30minutes
2. Check the Settings - Security - Unknown sources
3. Check the Settings - Developer options - USB debugging
4. Check the Settings - Developer options - Stay awake
5. Charge up LT26w more than 90%(Green lamp)
Operation
1. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing XPERIA acro HD's ftf.
Flashtool setting :
- check all of the Wipe column
- uncheck all of the Exclude column
- uncheck Misc column(No final verification)
2. Connects PC and LT26W by USB while pushing volume down key. Close the Flashtool when finished flashing.
3. Set up as "Notice"
4. Connects PC and LT26W by USB and executes step1.bat.
5. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing LT26w(6.1.A.1.58) ftf.
Flashtool setting :
- uncheck all of the Wipe column
- uncheck all of the Exclude column
- check Misc column(No final verification)
6. Turn on the power of LT26w, Connects PC and LT26w by USB and executes step2.bat.
7. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing LT26w(6.1.A.1.58) ftf.
Flashtool setting :
- uncheck all of the Wipe column
- uncheck all of the Exclude column
- check Misc column(No final verification)
8. Turn on the power of LT26w, Connects PC and LT26w by USB and executes step3.bat.
9. Execute step4.bat.
10. Execute step5.bat.
11. Turn off the power of LT26w, start up Flashtool (doesn't connect in USB) and prepare the flashing LT26w(6.1.A.1.58) ftf.
Flashtool setting :
- check all of the Wipe column
- check all of the Exclude column
- check Misc column(No final verification)
12. rooting finished. Install Superuser and Busybox (from Google play).
13. appreciate masters.
( なお、日本語での上記手順はこちら。 )
As for the routing, the way of here may be good. But I cannot read it. Also, seems that still there is a danger in this way (there is a possibility to be cannot charge-up ?).
And if you want to install CWM,
1. Access to "CWM Recovery for 2012 Xperia v02 リリース" and download "CWM Recovery for 2012 Xperia v02".
If you cannot found download link of "CWM Recovery for 2012 Xperia v02", get from here.
2. Extract the ZIP.
3. Connects PC and LT26w by USB and execute install.bat.
4. Appear "Finished!", finished the install.
5. appreciate masters.
( なお、日本語が読める方はこちらを参照して下さい。 )
About start-up of recovery, tap the screen during Sony logo display after the turn on.
Key operating method :
Up, Down : Vol+, Vol-
Enter : Camera shutter (not focus, need push deeply)
Back : Power
Click to expand...
Click to collapse
I dont have phone to test it yet,but just press thank for his translate it not a problem.cheer to him.i will get my phone next tomorrow.thanks mate.
Failed at step 5, it showd a lot of error "no such directory" ...
What have i done wrong?
Related
hi, i'm a newbie and i just wanna share on how to root the xperia sola through flashtool,(THANKS TO BIN4RY AND ANDROXYDE FOR THE GREAT APP THEY HAVE MADE!!!) i've been rooting my android maybe around 4 days trying different ways but still not rooted. I've tried the bin4ry runme.bat file but no success.i just figured out that you must first unlocked your bootloader in order to root it..so here it is for those like me who are so eager and desperate in rooting their xperia sola android phones..
DISCLAIMER: I WILL NOT HELD RESPONSIBLE FOR ANY DATA LOST OR BRICK OF YOUR ANDROID. PROCEED ON YOUR OWN RISK!!
THIS GUIDE IS FOR UNLOCKED BOOTLOADER
BEFORE PROCEEDING.YOU MUST BACKUP ALL YOUR FILES AND SAVE TO YOUR COMPUTER AND REMOVE YOUR EXTERNAL MEMORY CARD AND SIMCARD FOR YOU WILL LOSE ALL YOUR DATA AND FILES WHEN YOU ROOT YOUR ANDROID. YOU CAN ALSO BACKUP YOU FILES AND EVERYTHING USING PC COMPANION
BACKUP ALSO YOUR CURRENT FIRMWARE OR DOWNLOAD THE FTF FILE OF GINGERBREAD AND FLASH IT TO SWITCH BACK TO GB
BACKUP ALSO YOUR TA http://forum.xda-developers.com/showthread.php?t=2292598
HOW TO UNLOCKED YOUR BOOTLOADER:
http://unlockbootloader.sonymobile.com/instructions
OR
HOW TO UNLOCKED YOUR BOOTLOADER USING FLASHTOOL:
1. In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
2. In your device, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
3. On your computer, click Continue at the bottom of this page to start the unlock boot loader process.
4. Read through the information in the pop up window and click Yes, I’m sure, if you are still confident you want to unlock the boot loader.
Read through and accept the legal terms. Click I Accept.
Enter your name, a valid email adress and the first 14 digits of your device’s IMEI or MEID or IDID number (remove the last digit if necessary). Click Submit. You can view the IMEI or MEID number by entering *#06# on your device. If you have a tablet, click here to learn how to find your IMEI, MEID or IDID number.
The unlock boot boot loader key will be sent to your email. Save it for later use.
Now open your Flashtool(note: you must close the pc companion when it starts to show up because in some cases it slows down you Flashtool)
1. Turn on your phone, and connect with usb debugging on.
2. In you Flashtool go to Plugins-> Bootloader Unlock option, start it.
3. Now it will ask to disconnect your phone and reboot in FLASHMODE.
4. Again reboot your phone in FASTBOOT mode.
5. It will show a window with your IMEI number, insert your unlock key(the unlock that was sent to you in your email) and click "unlock".
6. The device will reboot and you are done!
*(your device must be turned off) hold the volume - before connecting it to your computer through usb (FLASHMODE) green light on led if you've done it correctly
*(your device must be turned off) hold the volume + before connecting it to your computer through usb (FASTBOOTMODE) blue light on led if you've done it correctly
credits to sid.8491 http://forum.xda-developers.com/showthread.php?t=1971363 ...sorry for copy-pasting your procedures..
TO RELOCKED YOUR BOOTLOADER http://forum.xda-developers.com/showthread.php?t=2332900 but i haven't tried it yet
PREPARATIONS:
1. download Flashtool by Bin4ry&Androxyde http://androxyde.github.io/
2. install the right drivers for your phone http://forum.xda-developers.com/showthread.php?t=1413293 -follow the procedures
PREPARATIONS FOR GINGERBREAD(.184)
1. your android must be manually updated to ics through Flashtool (LOCKED BOOTLOADER/UNLOCKED BOOTLOADER) http://androidlegend.com/update-son...cial-android-4-0-4-ics-firmware-6-1-1-b-1-54/
NOW THAT YOUR ANDROID IS ON ICS ROOT IT USING FLASHTOOL ( note: if your android is already on ics skip PREPARATIONS FOR GINGERBREAD(.184) of course )
1. Download this two kernels http://rapidgator.net/file/76795117/kernel.zip.html https://www.dropbox.com/s/8bj491lzhssrn20/kernel.zip or this link http://forum.xda-developers.com/showthread.php?t=2029756
2. Place the two Kernels into where your Flashtool folder in your computer (ex. C:\Flashtool\firmwares\(put the kernels here)
3. Tick usb debugging on ( Developer options > USB debugging ) and unknown sources ( Security > Unknown sources ) in your device
4. turn off your device
5. open the flashtool
6. click the Flash (bolt icon) and choose flashmode and select the 6.1.1.B.10 kernel and click ok
7. wait and when asked to connect your device, connect it by doing flashmode (volume - then connect it to your computer)
8. wait until it finishes.
9. unplug the device and turn it on
10. connect it again to the computer (device turned on) and wait till the root icon is clickable in your Flashtool
11. click the Root icon when available and choose superuser
12. wait until it finished and say that your device is rooted
13. unplug it again and turn it off
14. click again the Flash (bolt icon)and choose flashmode and select 6.1.1.B.54 kernel and click ok
15. wait and when asked to connect your device, connect it by doing flashmode (volume - then connect it to your computer)
16. wait till it finished and unplug your device and turn it on
17. enjoy!
*note : if in the first run you have the rooting unsuccessful or something. restart your computer. restart your device and Flash it again with the ics ftf file (PREPARATIONS FOR GINGERBREAD(.184) ) and repeat step 3.
*note : you must close the pc companion when doing the flashing and rooting
*your device must be flashed(6.1.1.B.10 kernel) in order to root it.
THANKS TO BIN4RY AND ANDROXYDE AND ALL THE PEOPLE THAT I HAVE USED LINKS TO THEIR THREADS!!
RECOGNITION ONLY TO THOSE PEOPLE AND NOT ME.
.i admire u made a very useful first post never seen anyone publishing a guide in his first post..great going..
thanks! i hope i can help those people who are just like me....it took me 4 days to figure out how to root my phone ..hehe
Disclaimer
1. All Instructions Given Here Are Tested BY Me.
2. I didn’t Invented These Methods. Credits Are Given To Their Respective Posters.
3. I Bear No Responsibility Of Any Action Taken By You That Bricked your Phone.
4. However If U Haven’t Hard Bricked Your Phone Ask Me And I Will Give u Your Solution.
5. Please Make A Nan droid Backup From CWM. Those Who Are Unlocking Their Bootloader Please Copy Important Content And Data Before You Proceed.
Click to expand...
Click to collapse
A Guide For New Users 2 Extreme User.
As We All Are Using Any Phone From Xperia 2011 Lineup
Phones Are
1. Sony Ericsson Live With Walkman (WT19i)
2. Sony Ericsson Xperia Mini (ST15i)
3. Sony Ericsson Xperia Mini Pro (SK17i)
4. Sony Ericsson Xperia Active (ST17i)
This Guide Only Tested On These Phones. So, I would Recommend These Only to Users of These Phones.
As We See Although Owning Same Device We Have Users Who Take Most Out Of Their Device And Some Just Sit Around Take Pictures And Call Or text Only. There Are Many Threads On XDA About Modifying Our Phones. So I Gathered Those And Made This.
Guide Divided For Three Kinds of Users. And Those Are
1. New User (Themes ,Games ,Non-root Apps )
2. Moderate Users (Root ,CWM Installation ,Basic Mods ,Stock Based ROMs)
3. Advanced Users (Unlocked Bootloader ,Custom ROMs , Custom Kernel )
So Let’s Begin.
1 .NEW USERS
Click to expand...
Click to collapse
Some Basic Themes And Basic Launchers, Wallpaper ,Ringtone And 2 HD Games For You.[If u need More Send Me The names And I’ll Send You those Links ]
Launchers:
Apex Launcher –Click Here
Nova Launcher –Click Here
Wallpapers: Samsung S4 –http://bit.ly/14MCjzN
Sony Xperia Z-Link Lost
Ringtones: Samsung S4 –http://bit.ly/14MCjzN
Galaxy S4 for Apex and Nova –http://bit.ly/15NfMzx
HD Games: Giving You Two Links OF HD Games with SD Data. [Unpack Archive Install Apk and Place them on Your SD Card and overwrite]
Need For Speed Most Wanted : Will Be Given Tomorrow
Gangster RIO: City Of Saints : Will Be Given Tomorrow
If You Want Some Games Of your Choice Reply here And I’ll Give You those Links
That’s All For you.
Now
2.MODERATE USERS
Click to expand...
Click to collapse
Root, CWM Installation, Basic Mods, Stock Based ROMs, GB To ICS Upgrade And GSM/WCDMA Bug Fix
Root
Click to expand...
Click to collapse
A. Gingerbread Root[Credit Goes to DooMLOrd]
First Of All Download Your Adb Drivers from Here-http://bit.ly/13HWyMZ
Then Down Load RootKit from Here- http://bit.ly/13HWInD
Now Let Begin
1. Connect Your Device to PC.
a. Make Sure You Selected MSC Mode From {Settings ~Xperia~Connectivity}
b. Enable USB Debugging
Settings-Applications-USB Debugging-Enable
2. Now Go To Settings-About Phone , See Your Build Number[Last 2 Digits]
IF You Are On .58 Continue Rooting (Ignore Step 3)
But If You Are On .62 Follow step 3 Or You Will Not Have Root.
3. Download Flashtool From Here – http://bit.ly/14anYXw
Download Your Phone GB .58 Firmware (.ftf) from Here according To Your Device
1. Sony Ericsson Live With Walkman (WT19i)- http://bit.ly/172zYwz
2. Sony Ericsson Xperia Mini (ST15i)- http://bit.ly/13g4TnA
3. Sony Ericsson Xperia Mini Pro (SK17i)- http://bit.ly/1384zv0
4. Sony Ericsson Xperia Active (ST17i)- http://bit.ly/1bRzArN
Now Install And Open Flashtool Folder (C:\\Flashtool\Drivers) And Run The .exe
And Check All Boxes It Will Now Install Drivers[If Any Warning Shows up Select Install Anyway]
Now Turn Your Phone Off And Reconnect The Battery.
Then Start Flash Tool And [Unpack The Archive To Get the FTF File] Drag the FTF File To Flashtool White Screen And press Ok.
Now You Will Asked To Connect Your Device To PC In FlashMode.
So Connect USB Cable To Your Phone While Pressing Volume Down Button.
Now You Will See Green LED On Your Phone LED Light.[IF NO LED Do It Again]
Now Flashtool Will Flash Firmware.[If Any Error Comes Up Do It Again]
Wait For Phone To Boot UP. Follow To Root.
4.[Same From Now On For All Phones]{Those Who Flashed .58 on Step 3 Please Redo Step 1}
5.Now Run The Root Kit. Open Folder And run runme.bat with Administrator
6.Now Press Any key And Your Phone Will Reboot After A Few SEcs.
7.Yahoo!!!!!!!!You Have Root Access Now.
B. Upgrade To ICS Offline
Click to expand...
Click to collapse
1.Download Your Required Files.[FTF According To Your Device]
Links
1. Sony Ericsson Live With Walkman (WT19i)- http://bit.ly/15Nhn8E
2. Sony Ericsson Xperia Mini (ST15i)- http://bit.ly/14ap6dO
3. Sony Ericsson Xperia Mini Pro (SK17i)- NOT Currently Available
4. Sony Ericsson Xperia Active (ST17i)- http://bit.ly/16eAHvg
2.Unpack The FTF File And Drag It To The Flashtool Main Window And press Ok.
3.Connect Phone To FlashMode When Asked.[Power off And While Connecting To PC Press Volume Down ,Confirm By Seeing The Green led]
4.Now Reboot To Your System When Done.
C. Ice-Cream Sandwich Root [Needed Only For Stock Rom][No need If Installing Stock Based ROMs]
Locked BootLoader
Click to expand...
Click to collapse
1. Downgrade To Gingerbread And Root As Described Above.
2. Root Gingerbread As Described Above.
3. Now Download This File- http://bit.ly/1bRA4yb
4. Unpack it And Run 01-local-prop
5. Upgrade To ICS ,But While Upgrading When You The Confirm Window Uptick The Wipe Data option.
6. Then Enable Unknown Sources[From Security] And USB Debugging [From Developers option]
7. Now Run 02-push-root-files.
8. You Will Have Root Access.
Un-Locked Boot Loaders
Click to expand...
Click to collapse
1. Flash Custom Kernel [Instructions][ICS ONLY]
Download any kernel Of Your Wish Or This Kernel –http://bit.ly/18FhLfg [Not Available For Active]
Open Flashtool. And Select The bolt Icon-Fastboot mode
a. Connect To Fastboot Mode [Power Off Then Connect While pressing Volume up Button]
b. If you See The Blue LED ,Then Continue
c. Select Kernel To Flash On The Right Side 2nd Option
d. Browse And select kernel
e.IF no error occurs ,Reboot And Have Root
CWM Installation [Clockwork MODE Custom Recovery]
Click to expand...
Click to collapse
Locked BootLoader
1. Download This File-http://bit.ly/14apOI8
2. Open Folder And Run install-cwm2.cmd
3. Press Enter And Recovery Will Be installed.
Unlocked Bootloader
Flashing Custom kernel Will Install Recovery.
CWM Recovery instructions
Click to expand...
Click to collapse
How To Enter?- Power off And While Booting Up keep pressing Volume Down Button.
Options?
1. Reboot System
2. Install zip From SD card-Installs Zip From SD Card[Required to Flash Mods And ROMs]
3. Factory Reset-Resets All Data
4. Wipe cache partition – Deletes/formats Cache[Required After Flashing A mod]
5. Backup And Restore-Backup All Data and Restore If Something Goes Wrong.
6. Advance
a. Wipe dalvik cache – Deletes dalvik cache[requires After Flashing mods]
Recovery Buttons
UP-Vol UP
Down- Vol Down
Select - Menu
Please Note That Recovery Interface May vary depending On the Version You Are using.
Basic MODS For you [requires root, cwm ]
Instructions:
1.Download The proper Mod And Place it On The root Of your SD Card.
2. Reboot to CWM Recovery.
3.Navigate To install zip From SD Card-chose zip to install-select what You Want To Flash. And Confirm By Yes.
4.Get Back To Main Recovery Menu And Select To Wipe Cache And in Advance-Wipe Dalvik Cache
5.Reboot to System
Mods List : 1. Sony Walkman V Player –http://bit.ly/19kv6ZE
2.Acid Audio Mod-http://bit.ly/172B8rS
3.CyberShot Camera MOD-[Not tested On Stock Rom]- http://bit.ly/18Fi61j
More Will Be Added Soon.
Stock Based ROMs[ROMs That Can Run Without Unlocking Bootloader ][Redirect link to original Thread]
1.Zelly cream 4.0-[Saqib nazm]- http://forum.xda-developers.com/showthread.php?t=2155803
2.xNXT Rom v10-[Pranav Panday]- http://bit.ly/12OdeyU
3.Viper Xperia V7-[saqib nazm]-http://bit.ly/1c6q1Uv
4.Revolution ICS HD™-[saqib nazm]-http://bit.ly/145TD3E
5.Gin2JellyBean v2.4.0-[Abhinav2]-http://bit.ly/1386H5R
More Rom Links Will Be added Soon.
Root Software List-
1. Titanium Backup (Backup Utility)- http://bit.ly/18BOcrg/
2. Seeder (Lag Reduction Tool)- http://bit.ly/1bmogEJ
3. Root Explorer (System File Modifier)- http://bit.ly/15iukIA
Problem: we keep settings at GSM only. But at every restart it changes to WCDMA preferred forcing we on 3G network auto.since We applied the official ics upgrade it has been there.
Fix:
1-How to use Baksmali_Smali.exe ( you need know this)
2-Extract your classes.dex file from framework.jar
3-Go to framework\smali\com\android\internal\telephony\
4-Copy new file into telephony folder
For Odex-ed ROMs go to http://code.google.com/p/smali/wiki/DeodexInstructions
Now, 2g/3g network fixed
Credits: savel-76
DOWNLOAD: View attachment 1789369
4.Advanced User
Click to expand...
Click to collapse
Unlocked Bootloader ,Custom ROMs , Custom Kernel
Click to expand...
Click to collapse
Unlocking BootLoader
Click to expand...
Click to collapse
Note: By Unlocking Bootloader you Will VOID Your Warranty. Please Proceed With Caution.
Flashtool Method
1. First Of All Get your IMEI No.[Dial *#06# To Get IT Write Down First 14 Digits Of It]
2. Then Go Here- http://unlockbootloader.sonymobile.com/
3. Read Everything And Fill Out The Form With Correct Information. And Visit your E-Mail To get the Code Afterwards.
4. I Am Using Flashtool To Do It. Alternatives Below.
5. Install Drivers From C:\\Flashtool\Drivers[Or The Single Driver File-]
6. Now Connect Your Phone In FlashMode Mode.[Power Off And While Connecting Press Volume Down, Green Led Will Light Up]
7. Open Flashtool
8. Click On plugins – Bootloader unlock-And Press ok[Now You Will Be asked To Connect In Fastboot Mode]
9. Enter Fastboot Mode[Power Off And While Connecting Press Volume UP, Blue Led Will Light Up]
10. Now Enter The Code You Got And It Will Unlock The BootLoader.
Relocking Boot Loader
Click to expand...
Click to collapse
If You Wish To Relock Your Phones Bootloader This Is The Way
Download Files
Relock Files - Download From Here
Step 1 : Install the flash tool in your computer
Step 2 : Extract the downloaded file and install it. copy the ".ftf" file in the firware folder. Default location C:\Flastool\firmwares
Step 3 : Now connect your phone with usb cable to the pc.
Step 4 : Open Flashtool and click the "Thunder" icon and select the flash mode and select the Xperia relock file and click OK.
Then a popup window open follow the procedure in that.
Step 5 : Now wait until the installation complete.
Step 6 : When the installation has completed your phone will not boot.
Step 7 : Install the new firmware using the flashtool. (above bootloader reloack file method).
Step 8 : Once the installation completes remove the USB cable and wait for 30sec and power it on.
Step 9 : Check *#*#7378423#*#* services you can check the boot loader status.
Custom ROMs
Click to expand...
Click to collapse
Warning : Requires Root Access ,CWM Custom Recovery And Unlocked Bootloader.
Custom ROMs Are ROMs Like AOKP,CM,AOSP Which IS Not Based On Stock ROMs .So It Requires A Custom Kernel To operate .Custom Kernel Allow To Upgrade Android Version Without official Support.
Now I am Giving A List Of Mostly Used Custom ROMs These Days.
1. Gingerbread
a.CyanogenMOD 7.2 (Android 2.3.7) -
1. Sony Ericsson Live With Walkman (WT19i)- http://get.cm/get/2JX
2. Sony Ericsson Xperia Mini (ST15i)- http://get.cm/get/2KL
3. Sony Ericsson Xperia Mini Pro (SK17i)- http://get.cm/get/2Kt
4. Sony Ericsson Xperia Active (ST17i)- http://get.cm/get/2KH
2.Ice Cream Sandwich
a.CyanogenMOD 9.0 (Android 4.0) –
1. Sony Ericsson Live With Walkman (WT19i)- http://get.cm/get/3qx
2. Sony Ericsson Xperia Mini (ST15i)- http://get.cm/get/3qV
3. Sony Ericsson Xperia Mini Pro (SK17i)- http://get.cm/get/3qL
4. Sony Ericsson Xperia Active (ST17i)- http://get.cm/get/3qU
b.CyanogenMOD 9.1 (Android 4.0.4)-
1. Sony Ericsson Live With Walkman (WT19i)- http://get.cm/get/3F3
2. Sony Ericsson Xperia Mini (ST15i)- http://get.cm/get/3Fn
3. Sony Ericsson Xperia Mini Pro (SK17i)- http://get.cm/get/3Fi
4. Sony Ericsson Xperia Active (ST17i)- http://get.cm/get/3Fl
3. Jelly Bean
a. CyanogenMOD 10.0(Android 4.1.2)-
1. Sony Ericsson Live With Walkman (WT19i)- http://get.cm/get/8SH
2. Sony Ericsson Xperia Mini (ST15i)- http://get.cm/get/8U9
3. Sony Ericsson Xperia Mini Pro (SK17i)- http://get.cm/get/8Ty
4. Sony Ericsson Xperia Active (ST17i)- http://get.cm/get/8U7
b.PAC-MAN ROM (Android 4.2.2)-
Rom For All In One Link- http://pacman.basketbuild.com/
Device Names-
1. Sony Ericsson Live With Walkman (WT19i)-Coconut
2. Sony Ericsson Xperia Mini (ST15i)-Smultron
3. Sony Ericsson Xperia Mini Pro (SK17i)-Mango
4. Sony Ericsson Xperia Active (ST17i)-Satsuma
Users Are Recommended To Backup Their System.
Instructions:
1. Download The Rom You wish To Use.
2. Unpack Boot.img From The Archive.
3.Open Flashtool[Connect your phone To Fastboot Mode]
4.Select the bolt Icon On upper-Left Side Of Flashtool. Select It. Then Select Fastboot.
5.Select Kernel To Flash .Browse the Kernel [boot.img]
6.Reboot Device And Enter CWM Recovery.
7.Do Factory reset, Wipe System[Found Under Mounts and Storage]
8.install zip from sd card-chose zip to install[select the ROMs]
9.Reboot And Enjoy.
Custom Kernels
Custom Kernels Are Modified Aftermarket kernel Used To Enhance User Experience And Allowing To Install Custom ROMs Which Is not Based On Stock. It Also Allows to Control CPU and Is Not Recommended for Users without Experience of Over clocking. It Also Auto Root The Device And Install Custom Recovery.
Some Kernels:
1.Extended Kernel Stock-http://bit.ly/18FhLfg [Not Yet Available For Active]
2.Lupus Kernel -
1. For Jelly Bean-http://bit.ly/13g7Wwc
2. For Ice Cream Sandwich-http://bit.ly/11gJPzR
3.Rage Kernel -http://bit.ly/145V56b
4.kappa Kernel -http://bit.ly/15iuMGw
Install Instruction :
a. Connect To Fastboot Mode [Power Off Then Connect While pressing Volume up Button]
b. If you See The Blue LED ,Then Continue
c. Select Kernel To Flash On The Right Side 2nd Option
d. Browse And select kernel
e.IF no error occurs ,Reboot And Have Root
EXpert users only
Click to expand...
Click to collapse
Ubuntu[Not stable]-http://bit.ly/19kxqzK
Firefox Os [Not stable]- Click Here
Speed Mod
1. 【 Liquid Performance™】[Aneel]-Click Here
ROMs List Was Taken From This Original Post
Click to expand...
Click to collapse
ROMs, KERNELS, FTFs, TOOLKITS and GUIDES
Written By
predatOr
Thank You For Reading This Guide, If You Face Any Problem Please Report Here Will Try To Solve.
Credits Goes To These People.
DooMLOrd
Bin4ry
Acid Audio Team
Rizel Lovins
Saqib Nazm
Pranav Panday
All Kernel Team
FXP
PAC Team
Aneel
predatOr
abheeshsv
.
MoStly XDA
Pleae PM Me If I MisSed Somebody.
Say Thanks IF You Really Appreciate.
Written By
Pranto Roy
XDA
Click to expand...
Click to collapse
yeah I know it was really tough for you to gather everything in one place. But I think as this thread is a reference to other guides I think you should sum up some of the most important & useful things in one place to make this thread more supportive to people who find it difficult where should they start from. So make this thread providing clear concepts on bootloader,root,kernel,firmware etc 1st. Then guide them though by providing easiest methods to root on different firmwares & unlocking bootloader. You can also add guide how to flash ftf with flashtool, I just had these things in mind to tell you how you can improve this thread Later If I remember something else I will reply here
saqib nazm said:
yeah I know it was really tough for you to gather everything in one place. But I think as this thread is a reference to other guides I think you should sum up some of the most important & useful things in one place to make this thread more supportive to people who find it difficult where should they start from. So make this thread providing clear concepts on bootloader,root,kernel,firmware etc 1st. Then guide them though by providing easiest methods to root on different firmwares & unlocking bootloader. You can also add guide how to flash ftf with flashtool, I just had these things in mind to tell you how you can improve this thread Later If I remember something else I will reply here
Click to expand...
Click to collapse
Thanks I will improve.sorry as its my first thread.i have added .ftf flash guide.
Thanks for this thread..!:good:
It helped me a lot with my xperia mini pro.
Now I have unlocked Bootloader/rooted phone with Kappa 1.6 Kernel and ViperXperia_V7 ROM and all that works from the first time just fine..!
I think my old Xperia X8 helped a lot to understand what is rooted/ulocked bootloader/CWM recovery/how to flash roms,kernels, but here everythink is a bit different.
prototype1 said:
Thanks for this thread..!:good:
It helped me a lot with my xperia mini pro.
Now I have unlocked Bootloader/rooted phone with Kappa 1.6 Kernel and ViperXperia_V7 ROM and all that works from the first time just fine..!
I think my old Xperia X8 helped a lot to understand what is rooted/ulocked bootloader/CWM recovery/how to flash roms,kernels, but here everythink is a bit different.
Click to expand...
Click to collapse
Welcome To xda
and i ve updated it
experts.help me
suggest me rom to add
prantoroy said:
experts.help me
suggest me rom to add
Click to expand...
Click to collapse
If I were you I would simply link to the collection thread in development section where all roms to all android versions are collected. Then new users are able to browse through the android versions and roms
Sent from my Nexus 4 running Android 4.2.2
mihahn said:
If I were you I would simply link to the collection thread in development section where all roms to all android versions are collected. Then new users are able to browse through the android versions and roms
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
will do!
help me developers
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
madjacky said:
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
Click to expand...
Click to collapse
do it as says.
link- http://www.androidust.com/install-ics-on-live-with-walkman-wt19i/
report if fails
.
.
please use black font coz it more easier to read
khamim said:
please use black font coz it more easier to read
Click to expand...
Click to collapse
ok.
will do within 4 hrs.
Editone
same problem as yours
madjacky said:
developers help me!! i have sony ericsson live with walkman wt19i with locked bootloader,after installing new mod rom via cwm recovery phone doesn't turning on. And when it does obly the logo of sony come ups and that's it. When i'm trying to do it hrough usb in the computer, computer can't see device and there's written: unknown usb device
Click to expand...
Click to collapse
i tried the app called lcd dpi modder free one from playstore n now my phone does not gets recognizes by pc or by companion and i cant even connect phone into fastboot or flashmoc either dont know what to do but i showed my cell to service center and they said i have to pay RS.2000:crying:
if any one out there know any thing please help n i tried flashtool to install drivers bt no luck tried every thing bt no luck
kapilkhanule said:
i tried the app called lcd dpi modder free one from playstore n now my phone does not gets recognizes by pc or by companion and i cant even connect phone into fastboot or flashmoc either dont know what to do but i showed my cell to service center and they said i have to pay RS.2000:crying:
if any one out there know any thing please help n i tried flashtool to install drivers bt no luck tried every thing bt no luck
Click to expand...
Click to collapse
what settings did you applied?
and without fastboot or flashmode
i'm sorry
I can't HELP
kapilkhanule said:
i tried the app called lcd dpi modder free one from playstore n now my phone does not gets recognizes by pc or by companion and i cant even connect phone into fastboot or flashmoc either dont know what to do but i showed my cell to service center and they said i have to pay RS.2000:crying:
if any one out there know any thing please help n i tried flashtool to install drivers bt no luck tried every thing bt no luck
Click to expand...
Click to collapse
Is your phone rooted and cwm installed?
mihahn said:
Is your phone rooted and cwm installed?
Click to expand...
Click to collapse
yes sir my phone is rooted and cwm recovery also working fine.when i restore stock rom from cwm then it boots with freexperia logo and after that it stucks ob black screen
---------- Post added 12th August 2013 at 12:02 AM ---------- Previous post was 11th August 2013 at 11:55 PM ----------
prantoroy said:
what settings did you applied?
and without fastboot or flashmode
i'm sorry
I can't HELP
Click to expand...
Click to collapse
i applied 180 dpi and it accepted and asked me to reboot.
i know without fastboot or flash mod you cant help and i also knw that how to flash kernel or stock rom but no luck without these two modes
kapilkhanule said:
yes sir my phone is rooted and cwm recovery also working fine.when i restore stock rom from cwm then it boots with freexperia logo and after that it stucks ob black screen
---------- Post added 12th August 2013 at 12:02 AM ---------- Previous post was 11th August 2013 at 11:55 PM ----------
i applied 180 dpi and it accepted and asked me to reboot.
i know without fastboot or flash mod you cant help and i also knw that how to flash kernel or stock rom but no luck without these two modes
Click to expand...
Click to collapse
first
you can't use stock rom with fxp kernel.so as u r having issue with ur fastboot flash a fxp supported kernel.and see if it runs
.
.
.
second
I think service centre is demanding money to fix fastboot and flashmod????
so your wish now.
kapilkhanule said:
yes sir my phone is rooted and cwm recovery also working fine.when i restore stock rom from cwm then it boots with freexperia logo and after that it stucks ob black screen
Click to expand...
Click to collapse
Try that:
1. Restore your stock rom in cwm
2. Select power off (or reboot system now)
3. Take off the battery and wait 15 seconds. Then reinsert the battery!
4. Hold volume up and while pressing volume up just connect your phone to the pc. Don't press power or any other button, just volume up and connect!
5. The blue led should light up now
6. Head over to the development forum and download a kernel for your stock rom (gb -> gb kernel, ics -> ics kernel)
7. Open flashtool and click on the flash -> fastboot mode -> select kernel to flash -> select the kernel working for your stock rom
8. Click okay and wait until it has finished (should take around 5 -10 seconds)
9. Disconnect your phone and press the power button
Now it should work fine
If not, download the latest version of flashtool again and install all drivers from the flashtool installation folder -> drivers for all devices/modes again. Then do the steps as mentioned above
If that doesn't work either, post a flashtool log after connecting and trying to flash the new custom kernel, or try flashing the stock rom in flashmode again :good:
mihahn said:
Try that:
1. Restore your stock rom in cwm
2. Select power off (or reboot system now)
3. Take off the battery and wait 15 seconds. Then reinsert the battery!
4. Hold volume up and while pressing volume up just connect your phone to the pc. Don't press power or any other button, just volume up and connect!
5. The blue led should light up now
6. Head over to the development forum and download a kernel for your stock rom (gb -> gb kernel, ics -> ics kernel)
7. Open flashtool and click on the flash -> fastboot mode -> select kernel to flash -> select the kernel working for your stock rom
8. Click okay and wait until it has finished (should take around 5 -10 seconds)
9. Disconnect your phone and press the power button
Now it should work fine
If not, download the latest version of flashtool again and install all drivers from the flashtool installation folder -> drivers for all devices/modes again. Then do the steps as mentioned above
If that doesn't work either, post a flashtool log after connecting and trying to flash the new custom kernel, or try flashing the stock rom in flashmode again :good:
Click to expand...
Click to collapse
thanksss so much but before this today i notices one thing in flash tool is my device is recognized as xperia active and im using live with walkma..any help???? see the log
prantoroy said:
first
you can't use stock rom with fxp kernel.so as u r having issue with ur fastboot flash a fxp supported kernel.and see if it runs
.
.
.
second
I think service centre is demanding money to fix fastboot and flashmod????
so your wish now.
Click to expand...
Click to collapse
sir thats what im telling you. i cannot connect my phone in fastboot or flashmode (blue or green light) anymore.i tried so many times but as i connect my phone with vol+/vol- phone blinks green or blue light for fraction of seconds and after that it goes off n phone enters charging mode.
if you know how to handle this this kinda situation please suggest me something/ one more thing is pc companion detects phone as live with wlakman which is right but flashtool detects as xperia active. dont know what to do ans service center told me it will cost me about RS. 2000.
Hello i made this post so everyone can follow the instructions.
THIS GUIDE IS OUTDATED NOW .0.266 IS OUT WHICH MEANS THAT IF YOU FOLLOW THIS TUTORIAL YOUR PHONE FIRMWARE WILL BE OUTDATED YOU CAN USE THIS METHOD FOR .0.266 BUT IF ANYTHING HAPPENS TO YOUR PHONE IT WILL BE NOT MY RESPONSIBILITY
If you want to try to root your phone using this method ill leave a kernel link for .0.266 below in the download section
For a tested root method for 0.266 try my guide here : http://forum.xda-developers.com/showthread.php?t=2656772
Doomlord gives some pretty clear instructions but a noob like my self some things does not make sence.
So i will post every step from the original thread : http://forum.xda-developers.com/showthread.php?t=2405933
And i will just add some details to every step.
So the steps to root your phone are.
1)Download the three files from the download section below (the 3 files in the original thread or in this thread i will put the same excact files)
2)open FlashTool and flash the XperiaSP_C530X_12.0.A.1.257_KernelOnly.ftf - 6.78 MB file, this is JUST the kernel of an older firmware which was rootable
2.1)open FlashTool and press the Lightning button
2.2)Select flashmode and then press ok
2.3)Select the kernel (ftf file) you want to flash .(for the first flasing as said above is the XperiaSP_C530X_12.0.A.1.257_KernelOnly.ftf file)
2.4)Unlpug and Power down the device
2.5)Wait 5 Seconds and the Plug it HOLDING the Volume Down button (this will put the device into flashmode)
2.6)When it says that the flashing is done unplug and power up the phone to make sure everything went as planned.
3)After the device booted up enable debugging mode (Settings->Developer Options -> Debugging Mode)
4)CLOSE FLASHTOOL <<< VVVIMP STEP
5)Extract the files from the DooMLoRD_Easy-Rooting-Toolkit_v18_perf-event-exploit.zip in the root directory (anywhere you want basically Doomlord suggested the C directory but any will work just fine)
!!! ATTENTION AS DOOMLORD REFFERED IN THE ORIGINAL TUTORIAL THIS STEP IS CRUCIAL BECAUSE THE PHONE WONT BE ROOTED WITH A PREVIOUS VERSION DOWNLOAD THE FILE FROM THIS DESCRIPTION OR THE ORIGINAL THREAD
6.0) FOR THIS STEPP your phone needs to be in Debugging Mode AND have Unknown Sources Checked (if not go to Settings->Security -> Unknown sources)
6.1) execute runme_ file corresponding to your OS on desktop PC, this will execute a SPECIAL version of my easy rooting toolkit <<< VVVIMP STEP
6.1a) If you run windows on your PC run the "runme_win.bat" file
6.1b) If you run Linux on your PC run the "runme_linux.sh" file
6.1c) If you run Macintoish (Mac) on your PC run the "runme_mac.sh" file
6.2) Just double click the file to excecute
6.3) A window will pop up.Follow the instructions to root your phone (your phone must be in debugging mode (as said above) AND have unknown sources checked (if not watch step 6.0)
6.4)When the phone is rooted it will restart
7) Check if your phone is rooted.
7.1)Open App Drawer and search for an App called SuperSU (it will be the latest version)
7.2)Open The App and check that everything is ok.If a window pops up saying that the Super SU binary was not found something in the root proccess went wrong)
8) Once you checked the root state of your device reopen FlashTool.
8.1)once in FlashTool press the Lightning button
8.2)Select flashmode and then press ok
8.3)Select the kernel (ftf file) you want to flash .(for the second flashing you will use the XperiaSP_C530X_12.0.A.2.254_KernelOnly.ftf file)
8.4)Unlpug and Power down the device
8.5)Wait 5 Seconds and the Plug it HOLDING the Volume Down button (this will put the device into flashmode)
8.6)When it says that the flashing is done unplug and power up the phone to make sure everything went as planned.
9) Once the phone boots enjoy your newly rooted phone
The 3 Files you need:
1)http://d-h.st/Kh7 .257 Kernel File
2)http://d-h.st/1Gp Doomlords Root Toolkit
3)http://d-h.st/4EO .254 Kernel
4)https://mega.co.nz/#!yclEiIjY!yvOW6UzCJnnisamK26uLjmbAetl5mUbv4EyeyXmteTk .0.266 Android 4.3 update (Most recent orignal FW released by sony)
Do you have Windows 8 and you cant find a way to install the ADB drivers ?
check this forum thread now
http://forum.xda-developers.com/showthread.php?t=1583801
THIS THREAD HAS TEACHING PURPOSES ONLY!!! THIS WAS NOT CREATED BY ME BUT DOOMLORD!!!ALL RIGHTS ARE HIS!! ALWAYS CHECK THE ORIGINAL ARTICLE FOR INFO BEFORE FOLLOWING THESE STEPS\
Creator : Doomlord
That's nice for noob bro and even a intermediate like me..
its nice to see younger members putting things like step by step..thnks bud.
Prm593 said:
That's nice for noob bro and even a intermediate like me..
its nice to see younger members putting things like step by step..thnks bud.
Click to expand...
Click to collapse
Thank you and you are welcome!!!
I am not a complete noob but i had a difficulty flashing the kernel and i was not familiar with flashtool so i made this guide!
And again thank you for your kind words
jackaros said:
Thank you and you are welcome!!!
I am not a complete noob but i had a difficulty flashing the kernel and i was not familiar with flashtool so i made this guide!
And again thank you for your kind words
Click to expand...
Click to collapse
nah i was saying that nice tutorial for noobs bro
Prm593 said:
nah i was saying that nice tutorial for noobs bro
Click to expand...
Click to collapse
Ok......
Flashtool says > Drivers need to be installed
jackaros said:
2.1)open FlashTool and press the Lightning button
2.2)Select flashmode and then press ok
2.3)Select the kernel (ftf file) you want to flash .(for the first flasing as said above is the XperiaSP_C530X_12.0.A.1.257_KernelOnly.ftf file)
2.4)Unlpug and Power down the device
2.5)Wait 5 Seconds and the Plug it HOLDING the Volume Down button (this will put the device into flashmode)
Click to expand...
Click to collapse
After the step 2.5, the device shows the green light (indicating the flashmode)
but in the Flashtool it says :
31/039/2013 18:39:55 - ERROR - Drivers need to be installed for connected device.
31/039/2013 18:39:55 - ERROR - You can find them in the drivers folder of Flashtool.
31/040/2013 18:40:06 - INFO - Device disconnected
31/040/2013 18:40:16 - INFO - Device connected with USB debugging off
31/040/2013 18:40:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
Apparently, the device goes into flashmode but flashtool doesn't detect it in there maybe because of some missing drivers, and the device turns off again. (If I'm getting it right)
I then tried to install drivers via C:/Flashtool/drivers/Flashtool-drivers.exe >> Xperia Z and SO-02E drivers + Flashmode Drivers + Flashboot Drivers
Repeating the process, gives the same results as mentioned above.
Please help.
max_rockzz said:
After the step 2.5, the device shows the green light (indicating the flashmode)
but in the Flashtool it says :
Apparently, the device goes into flashmode but flashtool doesn't detect it in there maybe because of some missing drivers, and the device turns off again. (If I'm getting it right)
I then tried to install drivers via C:/Flashtool/drivers/Flashtool-drivers.exe >> Xperia Z and SO-02E drivers + Flashmode Drivers + Flashboot Drivers
Repeating the process, gives the same results as mentioned above.
Please help.
Click to expand...
Click to collapse
By Sellecting the Xperia Z you install the drivers for the Xperia Z NOT the SP.Shut your phone without opening flashtool then plug the cable while holding down the Volume Down button (so it boots in flashmode).
Your PC will install the Flashmode drivers
Then To be sure open flashtool click devices and then check drivers
It should show some items in the list
( I got this from mine
Code:
31/021/2013 17:21:08 - INFO - List of connected devices (Device Id) :
31/021/2013 17:21:08 - INFO - - USB\VID_0FCE&PID_5195\YT9106T3Z8 Driver installed : true
31/021/2013 17:21:08 - INFO - - USB\VID_0FCE&PID_5195&MI_00\6&2298B7A2&0&0000 Driver installed : true
31/021/2013 17:21:08 - INFO - - USB\VID_0FCE&PID_5195&MI_01\6&2298B7A2&0&0001 Driver installed : true
31/021/2013 17:21:08 - INFO - List of ADB devices :
31/021/2013 17:21:08 - INFO - - YT9106T3Z8
31/021/2013 17:21:08 - INFO - List of fastboot devices :
31/021/2013 17:21:08 - INFO - - none
)
If you dont see anything a trick that i did and worked for me is that i go to Devices --> Manage --> Import --> Sony Xperia SP
If you dont get anything in "Import" you must go to Devices --> Manage --> Export --> Xperia SP --> Devices --> Manage --> Import --> Sony Xperia SP
I hope this will fix your driver problem.
max_rockzz said:
After the step 2.5, the device shows the green light (indicating the flashmode)
but in the Flashtool it says :
Apparently, the device goes into flashmode but flashtool doesn't detect it in there maybe because of some missing drivers, and the device turns off again. (If I'm getting it right)
I then tried to install drivers via C:/Flashtool/drivers/Flashtool-drivers.exe >> Xperia Z and SO-02E drivers + Flashmode Drivers + Flashboot Drivers
Repeating the process, gives the same results as mentioned above.
Please help.
Click to expand...
Click to collapse
Try installing this: CLICK HERE
Joku1981 said:
Try installing this: CLICK HERE
Click to expand...
Click to collapse
Thanks for helping :laugh:
Is it is necessary to unlock the bootloader to root your xperia sp
No it doesn't, there are a lot of guides that shows up how to do it
Enviado desde mi C5302 usando Tapatalk 4
mabdullah007 said:
Is it is necessary to unlock the bootloader to root your xperia sp
Click to expand...
Click to collapse
No of course not i have a locked bootloader as many rooted users have
Edit : but follow the instructions carefully so you won't brick your phone
Sent from my C5303 using xda app-developers app
I have try but i struck at step where you have to flash the older frimware ( .257) which is rooted one ....when i flash the older frimware(.254) after rebooting it show (.245) which is the newer one ......so what to do ........
mabdullah007 said:
I have try but i struck at step where you have to flash the older frimware ( .257) which is rooted one ....when i flash the older frimware(.254) after rebooting it show (.245) which is the newer one ......so what to do ........
Click to expand...
Click to collapse
245 is the new firmware
1 u flash 257
2 u root it
3 u flash 245 to get up to date
Simple as that
Edit : also download the original files from this post.
Ps: when i did the procedure it showed that my firmware version after flashing was 257 anyway try to root it and then flash 245 it may be just a display bug
Sent from my C5303 using xda app-developers app
thanks for your reply i have rooted my phone ...........
hello, sorry to interrupt but i guess this is a very noob question. i can't flash the kernel only (files provided by doomlord). after opening the flashtool, i select flashmode and after that, in selecting the firmware, there's no .257 kernel only, and flashtool doesn't recognize the files because its not in the ftf format because its in the .zip format. please help me on what to do, cause i'm not getting it. and can someone give me a clear instruction on how to flash the kernel only. thank you in advance.
edit: problem solved! just a little google will help
sarkissmae said:
hello, sorry to interrupt but i guess this is a very noob question. i can't flash the kernel only (files provided by doomlord). after opening the flashtool, i select flashmode and after that, in selecting the firmware, there's no .257 kernel only, and flashtool doesn't recognize the files because its not in the ftf format because its in the .zip format. please help me on what to do, cause i'm not getting it. and can someone give me a clear instruction on how to flash the kernel only. thank you in advance.
edit: problem solved! just a little google will help
Click to expand...
Click to collapse
Ok thanks for the notice but you can post it anyway so the next member with the same problem can see it
Sent from my C5303 using xda app-developers app
jackaros said:
Ok thanks for the notice but you can post it anyway so the next member with the same problem can see it
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
i just realize that the file extensions of each file is hidden that's why i cannot change it at all. for example, the file provided by doomlord, it is in the .zip format, if i don't delete the .zip extension, it will not change at all even though i put .ftf extension on the last part of the file. so what i did is i go to control panel > folder options > under the View tab, i uncheck the hide extensions for known file type. after that, you can remove the .zip extension and change it to .ftf. i just realized this after searching at google. i hope this can help other members out there who has experienced the same difficulty as me.
sarkissmae said:
i just realize that the file extensions of each file is hidden that's why i cannot change it at all. for example, the file provided by doomlord, it is in the .zip format, if i don't delete the .zip extension, it will not change at all even though i put .ftf extension on the last part of the file. so what i did is i go to control panel > folder options > under the View tab, i uncheck the hide extensions for known file type. after that, you can remove the .zip extension and change it to .ftf. i just realized this after searching at google. i hope this can help other members out there who has experienced the same difficulty as me.
Click to expand...
Click to collapse
Thanks for sharing the solution!
i tried to flash it on the firmware version 12.0.A.1.284
but it dosnt work !!! any ideas ?? thanks
hi guys
i have x10i
i want install android 4.0.4
now i want unlcoke bootloader for write cwm and custom rom
i give code unlocke of site sony
http://unlockbootloader.sonymobile.com/
but i cannot write code because i cannot go to the fastboot mode??
please help me how fastboot mode for write code unlocke bootloader
thanks
hi first download latest flashtool then install device drivers and turn on usb debugging on x10 then connect it with pc flashtool detect ur phone then there is option for root after the root then there is a option for unlock bootloader. cheer
hit thanks button if i help u.
Hey try this -
1.download latest flashtools which is a program that you would be using as long a you want to flash custom rom from here: http://androxyde.github.com/Flashtool/
2. Now in the Flashtools folder (C:\Flashtool\firmwares by default) go to the folder named drivers and you would see "flashtool-drivers" and install them (installed them all just in-case you decide to get another Xperia phone in the future.
3. On your phone go to setting>applacations>unknown sources and usb debugging in development and connect your phone to your computer with your data cable and then open flashtools.
4. root would now become available in flashtools so press it(the black unlocked lock ICON) and just wait for flashtools to reboot your phone. and you now have root access!
Installing a Recovery
In order to install a new Rom you would have to install a Recovery, according to the rom you want to install the thread would state whether you need a ClockWorkMod(CWM)(CWM5 in flashtools) or just flash through Xrecovery(0.3 in flashtools)
So in order to install a Recovery your phone must be connected to the USB port on your computer. So in flashtools click on the black square with a white cross in it and choose according.( setting>applacations>unknown sources and usb debugging in development much be on.
How to use Xrecovery.
To get into xrecovery you much power off your device, then press the power button until it vibrates, no when you see the sonyericsson logo start pressing the back button on your phone and then you would enter Xrecovery(in the version of flashtools this tutorial is based you must wait until you see the notification LED turns ) now in xrecovery you use the volume up, down, home and back buttons to navigate.
Bootloader Unlocking.
5.unplug your phone and power it off. On the top bar in flashtools plugins should now be available with the "Unlocked bootloader" option, so press it and wait until it says to connect your phone then do so by holding down your back button(on your phone) and plugging in your USB cable(don't let go until you see your notifications light come on GREEN
6. While the unlocking is taking place look out for the "you can now unplug and turn on device, then plug it again" unplug it and press the power button until vibrate and then Immediately plug it back in. Do it that one time and just leave it to finish and say "successfully applied unlock. Rebooting
7. Smile because you can now flash custom kernels and so forth and so on and also press thanks button.
If your stuck just send me a message.
Quick tip:flashing new roms usually means loosing your data(contacts, apps, etc) but you can use this to backup your data and when you're done re-download it and restore your data: https://play.google.com/store/apps/d....go.backup.pro
for more visit this thread http://forum.xda-developers.com/showthread.php?t=1821750
Why Android 4.0.4 ?? Exist best roms for our x10 :
http://forum.xda-developers.com/showthread.php?t=2562808&page=1 ( Semc debrand engine ) 4.1.2 Like Xperia Z ( Use with recommanded kernel )
http://forum.xda-developers.com/showthread.php?t=2024438 ( CMX10 ) 4.1.2 best Cyanogenmod for X10 I think..
( Use with FeraKernel-JB )
Hope this help
For the BL, use FlashTool, It's easy
Is it possible?
Greets&Thanks
KB
Yes
kugelblitz said:
Is it possible?
Greets&Thanks
KB
Click to expand...
Click to collapse
Disclaimer: "Before you do any thing please follow this thread & Backup your TA key first using this thread " or you will lose DRM keys forever.
My Sony Xperia Z3 Tablet Compact SGP 621 is now rooted with lollipop 5.0.2
1) First I flashed the normal Lollipop firmware using the flashtool which is there in one of the threads in Sony xperia Z3 tablet compact android development section
2) Then I checked in the dialer if bootloader can be unlocked. It said yes. Bootloader was then unlocked using the Sony website where you get the Sony unlock code in your email.
3) Then I followed this thread to http://forum.xda-developers.com/z3-...ment/advanced-stock-kernel-twrp-root-t2959720 to root my Sony Xperia Z3 tablet compact.
4) I did have few hiccups in the step 3 as I was new to Sony devices. Previously I was using Samsung devices (tablet and phones) but I managed to get the TWRP installed at this point.
5) Then I flashed the prerooted Zip file from this thread http://forum.xda-developers.com/z3-...-sgp621-lollipop-23-1-0-690-noba-ftf-t3058400
6) I did backup TA keys once my device was rooted. Since I read in many threads that backing up TA keys required root.
Thats it. Once I was finished with step 5. Tablet got rebooted and I had SuperSu installed with awesome lollipop firmware on my Sony Xperia Z3 Tablet compact.
Now I am a very happy and satisfied man since then. I am getting excellent battery life of above 10 hours in 4 days.
Since I was new to Sony devices I had to struggle a bit but it was worth the hardwork. Lollipop is extremely smooth and battery life is amazing.
Hope you find this information useful. If you need screenshots please let me know I will share it in my next post.
Cheers!
That's great, but it look like complex...., can you write the steps in detail?
Detailed procedure I followed to root my Sony Xperia Z3 Tablet SGP 621 (lollipop)
Disclaimer: "Before you do any thing please follow this thread & Backup your TA key first using this thread " or you will lose DRM keys forever.
Here is what I did. Sorry for making it so long.
MY PC - Windows 7 x64 SP1
My Device - Sony Xperia Z3 Tablet Compact.
1) Install the flashtool on your PC. The one which I used was flashtool-0.9.18.5-windows.exe file.
Once downloaded install the flashtool to lets say C:\Flashtool.
In that folder go to "drivers" folder and install the file.
This is extremely important.
Please refer to the "driver installation 1.jpeg" and "driver installation 2.jpeg" in the attachments below on what to select during installation.
Once you select those three options hit "install".
Now you have flashtool installed on your PC.
Go to "Start" -> type " Flash and you will have two options if you are having 64bit windows OS. Select "Flashtool 64".
For better understanding please check the "Flashtool 64.jpeg" in the below attachments.
When you open flashtool software it will ask you to move the firmware ftf file which is there in C:\Flashtool\firmwares to C:\Users\abcd\.flashTool\firmwares
abcd is my username in the PC I used.So you have to navigate to similar path in your PC.
In the same location paste your Sony lollipop firmware SGP621_23.1.A.0.690_NOBA.ftf
flashtool is ready for use.
2) On your Sony xperia z3 tablet. Go to Settings -> Developer settings -> Check USB debugging and unknown sources.
Switch off the device.
Now press "volume down" and connect the Sony Xperia Z3 tablet to your PC.
Select the SGP621_23.1.A.0.690_NOBA.ftf in the flashtool and flash it.
This might take roughly 5 to 10 minutes but it will complete for sure.
Reboot the device and go inside the Settings -> Developer settings -> Check USB debugging and unknown sources.
3) Unlocking bootloader (Do this step ONLY if you have backed up your TA keys or Do NOT attempt this)
Open the phone dialer on Sony Xperia Z3 tablet and type *#*#7378423#*#* .
Go to Service info > Configuration > Rooting Status.
It should say bootloader unlock allowed: yes
You will need IMEI number of your Sony Xperia Z3 Tablet Compact.
Either you can check on your Box or type *#06# and you will get your IMEI number.
Write this down somewhere.
Go to this site http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/ and follow the instructions to get your unique unlock code.
Once you go through each and every step in that sonymobile site you will get the code and further instructions in your email.
For better understanding please check the jpeg attachments "bootloader unlock step 3" and "bootloader unlock step 4" below.
Now Power off your Sony Xperia Z3 tablet compact and then press "volume up".
Connect the tablet to PC.
To proceed further you will need adb. Click here to download adb.
Install the adb setup on your PC.
Go to the folder C:\Program Files (x86)\Minimal ADB and Fastboot
Press "shift" button and right click in the empty space inside that folder.
You will get the option "Open Command Window here"
Select that option.
Now type the below commands (these commands are there in the bootloader unlock step 3.jpeg and bootloader unlock step 4.jpeg" below in attachments)
fastboot devices
fastboot i 0x0fce oem unlock <your unlock code>
Thats it. Your bootloader should be unlocked now.
Reboot the device and go inside the Settings -> Developer settings -> Check USB debugging and unknown sources.
3) Installation of TWRP and Root.
You need .img file for this.
From this thread I downloaded the .img
File name will be Z3TC-stock-twrp.img.
Just rename this file as boot.img and place it in C:\Program Files (x86)\Minimal ADB and Fastboot
Power off your Sony Xperia Z3 tablet compact and then press "volume up".
Connect your tablet to PC.
Go to the folder C:\Program Files (x86)\Minimal ADB and Fastboot
Press "shift" button and right click in the empty space inside that folder.
You will get the option "Open Command Window here"
Type the below commands one after the other.
fastboot devices
fastboot flash boot boot.img
it should say "finished". check the "successful bootimg commands.jpeg " in below attachments.
Reboot the device.
Download the Pre-rooted flashable Zip from here
Download the SuperSu from here
Copy the Prerooted flashable zip and SuperSU to your SD card.
Switch off the Tablet.
Go to recovery by pressing "power" & volume up and down alternatively.
You will now enter TWRP.
Install the SuperSU zip file.
Then Install the Pre-rooted flashable zip file.
Reboot and you are done!
You will now have working Root, TWRP and awesome Lollipop firmware on your beautiful Sony Xperia Z3 Tablet Compact.
4) Final step Backup TA keys.
After rebooting the device.
Once it enters the homescreen.
Go inside the Settings -> Developer settings -> Check USB debugging and unknown sources.
Connect the Tablet to PC
Download the backup TA software from here
Extract it on your PC.
Double click on the Backtup-TA.bat
It will identify your device.
Just back up your DRM keys from the options on your screen.
I read online and in some threads in XDA that backup TA software needs the device to be rooted and that is why I kept this step in the end.
I completely agree if you guys find the above procedure tedious.
After going through many threads and websites this is how the steps panned out.
This is the procedure that worked for me in the end.
I did have few hiccups and bootloop as well. Then I just kept it flashmode and re-flashed the lollipop ftf file using flashtool with "wipe data" option checked.
That solved the problem.
Coming from Samsung devices I had to find out what was fastboot mode, flash mode, how to enter recovery and how to use flashtool. It was all new to me.
But I didn't give up and went through the grind.
Result? Super Sony Xperia Z3 Compact SGP 621 with Root on Lollipop firmware with Excellent battery life.
Thanks to all the brilliant developers on this site who in various threads explained various aspects of rooting. It is because of them I was able to put everything together.
Please find all the screenshots in the attachments below.
Hope you find this information useful.
Thank you
Cheers!
I do not understand the procedure.
If you unlock the bootloader (step 3) you lose the keys drm. The backup of the partition TA must do so before unlocking the bootloader.
You have verified that have intact the drm keys?
(not speak English, I use translator)
Samavb said:
Here are the steps in detail. Sorry for making it so long.
MY PC - Windows 7 x64 SP1
My Device - Sony Xperia Z3 Tablet Compact.
1) Install the flashtool on your PC. The one which I used was flashtool-0.9.18.5-windows.exe file.
Once downloaded install the flashtool to lets say C:\Flashtool.
In that folder go to "drivers" folder and install the file.
This is extremely important.
Please refer to the "driver installation 1.jpeg" and "driver installation 2.jpeg" in the attachments below on what to select during installation.
Once you select those three options hit "install".
Now you have flashtool installed on your PC.
Go to "Start" -> type " Flash and you will have two options if you are having 64bit windows OS. Select "Flashtool 64".
For better understanding please check the "Flashtool 64.jpeg" in the below attachments.
When you open flashtool software it will ask you to move the firmware ftf file which is there in C:\Flashtool\firmwares to C:\Users\abcd\.flashTool\firmwares
abcd is my username in the PC I used.So you have to navigate to similar path in your PC.
In the same location paste your Sony lollipop firmware SGP621_23.1.A.0.690_NOBA.ftf
flashtool is ready for use.
2) On your Sony xperia z3 tablet. Go to Settings -> Developer settings -> Check USB debugging and unknown sources.
Switch off the device.
Now press "volume down" and connect the Sony Xperia Z3 tablet to your PC.
Select the SGP621_23.1.A.0.690_NOBA.ftf in the flashtool and flash it.
This might take roughly 5 to 10 minutes but it will complete for sure.
Reboot the device and go inside the Settings -> Developer settings -> Check USB debugging and unknown sources.
3) Unlocking bootloader
Open the phone dialer on Sony Xperia Z3 tablet and type *#*#7378423#*#* .
Go to Service info > Configuration > Rooting Status.
It should say bootloader unlock allowed: yes
You will need IMEI number of your Sony Xperia Z3 Tablet Compact.
Either you can check on your Box or type *#06# and you will get your IMEI number.
Write this down somewhere.
Go to this site http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/ and follow the instructions to get your unique unlock code.
Once you go through each and every step in that sonymobile site you will get the code and further instructions in your email.
For better understanding please check the jpeg attachments "bootloader unlock step 3" and "bootloader unlock step 4" below.
Now Power off your Sony Xperia Z3 tablet compact and then press "volume up".
Connect the tablet to PC.
To proceed further you will need adb. Click here to download adb.
Install the adb setup on your PC.
Go to the folder C:\Program Files (x86)\Minimal ADB and Fastboot
Press "shift" button and right click in the empty space inside that folder.
You will get the option "Open Command Window here"
Select that option.
Now type the below commands (these commands are there in the bootloader unlock step 3.jpeg and bootloader unlock step 4.jpeg" below in attachments)
fastboot devices
fastboot i 0x0fce oem unlock <your unlock code>
Thats it. Your bootloader should be unlocked now.
Reboot the device and go inside the Settings -> Developer settings -> Check USB debugging and unknown sources.
3) Installation of TWRP and Root.
You need .img file for this.
From this thread I downloaded the .img
File name will be Z3TC-stock-twrp.img.
Just rename this file as boot.img and place it in C:\Program Files (x86)\Minimal ADB and Fastboot
Power off your Sony Xperia Z3 tablet compact and then press "volume up".
Connect your tablet to PC.
Go to the folder C:\Program Files (x86)\Minimal ADB and Fastboot
Press "shift" button and right click in the empty space inside that folder.
You will get the option "Open Command Window here"
Type the below commands one after the other.
fastboot devices
fastboot flash boot boot.img
it should say "finished". check the "successful bootimg commands.jpeg " in below attachments.
Reboot the device.
Download the Pre-rooted flashable Zip from here
Download the SuperSu from here
Copy the Prerooted flashable zip and SuperSU to your SD card.
Switch off the Tablet.
Go to recovery by pressing "power" & volume up and down alternatively.
You will now enter TWRP.
Install the SuperSU zip file.
Then Install the Pre-rooted flashable zip file.
Reboot and you are done!
You will now have working Root, TWRP and awesome Lollipop firmware on your beautiful Sony Xperia Z3 Tablet Compact.
4) Final step Backup TA keys.
After rebooting the device.
Once it enters the homescreen.
Go inside the Settings -> Developer settings -> Check USB debugging and unknown sources.
Connect the Tablet to PC
Download the backup TA software from here
Extract it on your PC.
Double click on the Backtup-TA.bat
It will identify your device.
Just back up your DRM keys from the options on your screen.
I read online and in some threads in XDA that backup TA software needs the device to be rooted and that is why I kept this step in the end.
I completely agree if you guys find the above procedure tedious.
After going through many threads and websites this is how the steps panned out.
This is the procedure that worked for me in the end.
I did have few hiccups and bootloop as well. Then I just kept it flashmode and re-flashed the lollipop ftf file using flashtool with "wipe data" option checked.
That solved the problem.
Coming from Samsung devices I had to find out what was fastboot mode, flash mode, how to enter recovery and how to use flashtool. It was all new to me.
But I didn't give up and went through the grind.
Result? Super Sony Xperia Z3 Compact SGP 621 with Root on Lollipop firmware with Excellent battery life.
Thanks to all the brilliant developers on this site who in various threads explained various aspects of rooting. It is because of them I was able to put everything together.
Please find all the screenshots in the attachments below.
Hope you find this information useful.
Thank you
Cheers!
Click to expand...
Click to collapse
Thank you very much!
I think when you unlock bootloader, you will lose DRM keys.....
Sony apps that are working after rooting
kvi said:
I do not understand the procedure.
If you unlock the bootloader (step 3) you lose the keys drm. The backup of the partition TA must do so before unlocking the bootloader.
You have verified that have intact the drm keys?
(not speak English, I use translator)
Click to expand...
Click to collapse
Hi,
Album,
Walkman
Playstation App,
Camera,
Track ID
and any other Sony apps are all working and updating when I am connected to internet.
So far I dont have a single force close in any app or any sudden reboots.
Screenshots enclosed for your reference. .
Cheers!
Can you verify if you can connect to PS4 or login to PSN network after rooting with steps you provided? Thank you very much.
Samavb said:
Hi,
Album,
Walkman
Playstation App,
Camera,
Track ID
and any other Sony apps are all working and updating when I am connected to internet.
So far I dont have a single force close in any app or any sudden reboots.
Screenshots enclosed for your reference. .
Cheers!
Click to expand...
Click to collapse
Deleted
Able to login to Sony Entertainment Network
hagalah said:
Can you verify if you can connect to PS4 or login to PSN network after rooting with steps you provided? Thank you very much.
Click to expand...
Click to collapse
Hi,
Yes, I am able to login to PSN network after rooting with the above steps.
Unfortunately, I do not have PS4 to check the connection.
Please find the attached screenshots for your reference.
Cheers!
Thank you. I followed your steps and everything works fine. I can connect to PS4 remotely using LTE without any problem.
But is it possible to get a working TWRP? I can't get into recovery mode after rooting and flash the device. Any solution? I need to flash xposed via TWRP...Thanks.
Samavb said:
Hi,
Yes, I am able to login to PSN network after rooting with the above steps.
Unfortunately, I do not have PS4 to check the connection.
Please find the attached screenshots for your reference.
Cheers!
Click to expand...
Click to collapse
TWRP
hagalah said:
Thank you. I followed your steps and everything works fine. I can connect to PS4 remotely using LTE without any problem.
But is it possible to get a working TWRP? I can't get into recovery mode after rooting and flash the device. Any solution? I need to flash xposed via TWRP...Thanks.
Click to expand...
Click to collapse
Hi,
In order to get working TWRP you can try repeating the step 3 and reflash the .img file from that step. I am hopeful that doing this will work.
Don't forget to check to check the USB debugging AND unknown sources in security options.
To enter recovery you need to keep holding the "power" and keep pressing "volume" up and down alternatively for a little while say 10 to 15 seconds (max).
It will enter the TWRP for sure.
Once you do enter TWRP just "wipe cache" & " wipe dalvich cache" once.
Cheers!
TA partition backup
i am pretty sure u need root on a locked bootloader before backing up ur TA keys.
once unlocked,ur TA keys are gone.no amt of backups,reflash official firmware or any other magic shows will recover those keys.
u can check if ur TA keys are intact by keying in*#*#7378423#*#* select service tests>security and look out for for the screenshot below.i have compared an unrooted and rooted with TA backed up and am very sure this is what u shld have if u have backed up TA keys correctly and restored them. Any errors would mean ur TA keys are screwed.
Samavb said:
Hi,
Yes, I am able to login to PSN network after rooting with the above steps.
Unfortunately, I do not have PS4 to check the connection.
Please find the attached screenshots for your reference.
Cheers!
Click to expand...
Click to collapse
Mate, I suggest you remove/amend/add disclaimer to your post on how you root and backup your TA.
It is well known and proven in xda for sony devices, you CANNOT unlock your bootloader to backup TA keys. Once unlock,your TA keys are GONE and there is no way you can recover them.
that is why the root exploit was found on the z3 compact and we are able to root with a LOCKED bootloader to backup TA keys BEFORE unlocking and flash like no tomorrow.
Please do all the noobs a favor and make the changes before someone here starts multiple threads on recovering TA keys or warranty related questions.
It didn't work to reflash TWRP, it will just get into boot loop unless flash the rom again. The the previous TWRP was gone.
Can you verify that you can enter TWRP after flashing the rom? Look likes it is impossible for now.
Samavb said:
Hi,
In order to get working TWRP you can try repeating the step 3 and reflash the .img file from that step. I am hopeful that doing this will work.
Don't forget to check to check the USB debugging AND unknown sources in security options.
To enter recovery you need to keep holding the "power" and keep pressing "volume" up and down alternatively for a little while say 10 to 15 seconds (max).
It will enter the TWRP for sure.
Once you do enter TWRP just "wipe cache" & " wipe dalvich cache" once.
Cheers!
Click to expand...
Click to collapse
Ok, I found out the correct solution to get TWRP works on rooted lollipop Z3TC.
Follow the other XZDualrecovery tread and install the XZDualRecovery. Then you can boot into TWRP by using volume Down.
You can also install Xposed framework via TWRP and Xposed installer via regular apk install.
I did get bootloop by installing xposed installer. Just uninstall Xposed framwork from TWRP then it will back to normal. Hope this helps.
hagalah said:
It didn't work to reflash TWRP, it will just get into boot loop unless flash the rom again. The the previous TWRP was gone.
Can you verify that you can enter TWRP after flashing the rom? Look likes it is impossible for now.
Click to expand...
Click to collapse
DualRecovery working
hagalah said:
Ok, I found out the correct solution to get TWRP works on rooted lollipop Z3TC.
Follow the other XZDualrecovery tread and install the XZDualRecovery. Then you can boot into TWRP by using volume Down.
You can also install Xposed framework via TWRP and Xposed installer via regular apk install.
I did get bootloop by installing xposed installer. Just uninstall Xposed framwork from TWRP then it will back to normal. Hope this helps.
Click to expand...
Click to collapse
Hi,
Glad to know that you have working TWRP now.
I am waiting for my relatives to return my tablet.
Once I get it back I will try to install Xposed and check for TWRP.
Update:-
Got my tablet back and installed XZDual recovery successfully.
Cheers!
hagalah said:
Ok, I found out the correct solution to get TWRP works on rooted lollipop Z3TC.
Follow the other XZDualrecovery tread and install the XZDualRecovery. Then you can boot into TWRP by using volume Down.
You can also install Xposed framework via TWRP and Xposed installer via regular apk install.
I did get bootloop by installing xposed installer. Just uninstall Xposed framwork from TWRP then it will back to normal. Hope this helps.
Click to expand...
Click to collapse
Xposed now works with the latest XZrecovery, if you get bootloop try clearing the art cache and it will solve the problem.
Sent from my SGP621 using XDA Free mobile app
Samavb said:
Disclaimer: "Before you do any thing please follow this thread & Backup your TA key first using this thread " or you will lose DRM keys forever.
Click to expand...
Click to collapse
Maybe it is a silly question, but what exactly are the DRM-key for? Do I need them really?!
kugelblitz said:
Maybe it is a silly question, but what exactly are the DRM-key for? Do I need them really?!
Click to expand...
Click to collapse
Drm keys are needed for x reality effect to work, and also drm keys are needed im order for the lowlight photos to look good.
Sent from my SGP621 using XDA Free mobile app