Hi
I have a SIII, international version. My touch screen is not responding (hardware problem), but is displaying everything. System is working, hard and soft buttons also.
I want to send it in service, BUT, I had it rooted. Found my stock rom from my region, flash it with Odin, got rid of the root but I can't reset the flash counter. I can't install triangle away without touch working.
I don't know either if after flash the usb debugging is on or not, for using ADB (if it works). I am guessing is not.
Any ideas ?
Your supposed to use triangle away before flashing firmware you need root
Sent from my GT-I9300 using xda premium
yldlj said:
Your supposed to use triangle away before flashing firmware you need root
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I know that now. But even if I can use odin + CF to root it again, I still can not use triangle away.
Question, how I get rid of root CW+root after reseting (asuming I'll find a way), flashing again will not increase the counter ?
rsndetre said:
I know that now. But even if I can use odin + CF to root it again, I still can not use triangle away.
Question, how I get rid of root CW+root after reseting (asuming I'll find a way), flashing again will not increase the counter ?
Click to expand...
Click to collapse
Every flash of custom roms/kernels from your your pc to the phone will raise the flash counter. Only flashes done with/on the phone don`t raise the counter. Unroot it , send it in and cross your fingers. Try doing a factory reset after unrooting. I once sent in a rooted and bricked I9000 and it got repaired under warranty.
FLashing stock firmware will not increase your counter
Sent from my GT-I9300 using xda premium
yldlj said:
FLashing stock firmware will not increase your counter
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Flashing signed stock firmware will not increase your counter
Sent from my GT-I9300 using xda premium
jamie2002uk said:
Flashing signed stock firmware will not increase your counter
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ok, what about the original problem ? I can root the phone, np, but how to run triangle away on it, without touch working ?
Edit: any other way to enable usb debugging, like from recovery ?
Use a USB-OTG cable and attach a USB mouse to it. Very bad replacement for touchscreens but should get the stuff done
d4fseeker said:
Use a USB-OTG cable and attach a USB mouse to it. Very bad replacement for touchscreens but should get the stuff done
Click to expand...
Click to collapse
Good idea. Thanks.
Related
if I only upgraded to stock samsung firmware roms, will my counter still be triggerd? and how would I check before I send it for service?
Search for, download and install triangle-away from the play store. It will tell you the count and give you the option to reset to 0
Sent from my GT-I9100 using Tapatalk 2 Beta-6
DarkRyoushii said:
Search for, download and install triangle-away from the play store. It will tell you the count and give you the option to reset to 0
Sent from my GT-I9100 using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
Triangle Away only works on ICS-based ROMS.
If you don't have ICS installed, I would suggest getting a USB jig since that resets your counter to 0.
If you have ICS and are rooted, you can download Triangle Away directly to your phone (play store charges you $3 -.-) Chainfire has a thread here on XDA where you can download Triangle Away for free.
I have ginger bread rom, 2.3.3 back on it now. Not rooted. My usb port is messed up, so I cannot hook up to usb. Just to charge. So I was hoping there was a way to check the counter before I send it into see what they say
Sent from my GT-I9100M using XDA
ryanhutchinson said:
I have ginger bread rom, 2.3.3 back on it now. Not rooted. My usb port is messed up, so I cannot hook up to usb. Just to charge. So I was hoping there was a way to check the counter before I send it into see what they say
Sent from my GT-I9100M using XDA
Click to expand...
Click to collapse
You need a USB jig to reset the counter. You can buy one for $3 on Amazon
Will it work even with my usb port issue?
Sent from my GT-I9100M using XDA
ryanhutchinson said:
I have ginger bread rom, 2.3.3 back on it now. Not rooted. My usb port is messed up, so I cannot hook up to usb. Just to charge. So I was hoping there was a way to check the counter before I send it into see what they say
Sent from my GT-I9100M using XDA
Click to expand...
Click to collapse
Boot to download mode. It will not display a count at all if your count is zero. Otherwise you'll see a count if a non-Samsung signed kernel was ever flashed to that phone.
ryanhutchinson said:
Will it work even with my usb port issue?
Sent from my GT-I9100M using XDA
Click to expand...
Click to collapse
Yes. You turn off your phone and insert the USB jig. Your phone will automatically boot into download mode and erase the flash counter.
Azure Flame Kite said:
Yes. You turn off your phone and insert the USB jig. Your phone will automatically boot into download mode and erase the flash counter.
Click to expand...
Click to collapse
Not a definite, actually. If his usb port is jacked, there it's a possibility it won't work.
Ok. I checked in download mode. It says one count. If I send it for service, chances are it won't be covered with thatone count on there, correct?
Sent from my GT-I9100M using XDA
ctomgee said:
Not a definite, actually. If his usb port is jacked, there it's a possibility it won't work.
Click to expand...
Click to collapse
I know that, but it's better to try out first and it's only $3.
Since he's on 2.3.3, he still has the old bootloaders.
I had 2.3.5 rom on there before I went back to stock
Sent from my GT-I9100M using XDA
do exactly, will not require usb. if you got a rooted phone
check you have i9100 not i9100G
root your phone
install mobile odin
flash stock ICS ROM from sammobile / checkfus [not the intratech's]
flash using mobile odin
afterboot root the ics using cf-root
install triangleaway and remove counter / triangle [double check if download mode and triangle away says same thing about counter]
now flash your region stock GB back using mobile odin
now you are on stock GB without counter and triangle.
now wipe using *2767*3855# to finish the update and fix csc and stuff.
I have gt-9100m. Will that work?
Sent from my GT-I9100M using XDA
i dont know, please search for it,
It should work. However I am not rooted anymore and can't hook up to computer to root. So I'm basically screwed
Sent from my GT-I9100M using XDA
HERE
http://forum.xda-developers.com/showthread.php?t=1494114
I don't have ics on my phone. That won't work
Sent from my GT-I9100M using XDA
See if mobile Odin works on un rooted phone, if yes, do as I said
Sent from my GT-I9100
atifsh said:
See if mobile Odin works on un rooted phone, if yes, do as I said
Sent from my GT-I9100
Click to expand...
Click to collapse
I think Mobile Odin requires root, unfortunately.
My question is basically what the title asks. Is there any way to reset the Odin counter yet? Apparently Triangle Away does not work yet for Sprint's S3 (but it does work for the international I believe). Does anyone know if chainfire is working on making the AT&T/T-Mobile/Sprint/Verizon versions compatible? Or does anyone know any other ways? I tried using the USB Jig I use for my Epic 4G Touch but it does not work.
And what makes the AT&T variant special that they can avoid tripping the counter?
What?
Sent from my SPH-D710 using xda app-developers app
that would be cool if they had a reset counter for tmobiles gs3.
iniz94 said:
What?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
The AT&T variant has a method to flash a custom recovery without tripping the flash counter. I'm just wondering what's different about that phone that allows this.
wow 2 threads in a row I'm tired of seeing posted...
Here I think this could be of some help.. https://twitter.com/ChainfireXDA. And as he says a few posts back the hardware is completely different between these and the international version. As of now he doesn't know if and when triangle away will be available for us. With that link you'll be the first to know. I'm sure if the counter gets reset he'll be the 1 to do it. And all the methods that don't trip the counter involve installing a rooted system which in itself doesn't trip the counter and then manually flashing tha recovery via adb
billard412 said:
Here I think this could be of some help.. https://twitter.com/ChainfireXDA. And as he says a few posts back the hardware is completely different between these and the international version. As of now he doesn't know if and when triangle away will be available for us. With that link you'll be the first to know. I'm sure if the counter gets reset he'll be the 1 to do it. And all the methods that don't trip the counter involve installing a rooted system which in itself doesn't trip the counter and then manually flashing tha recovery via adb
Click to expand...
Click to collapse
Just to clarify: all methods i have seen involve installing a "stock" roms, with root injected, via ODIN. The counter sees these types of roms as an official rom. Flashing anything goes else via ODIN trips the counter. However, once you have root you can use adb or dd in a terminal emulator to load a custom recovery or just load mobile ODIN. You can the use either of these to flash any custom rom without tripping the counter.
bj | SGH-I747M | Rogers | Rooted | ICS | CWR
bjtheone said:
Just to clarify: all methods i have seen involve installing a "stock" roms, with root injected, via ODIN. The counter sees these types of roms as an official rom. Flashing anything goes else via ODIN trips the counter. However, once you have root you can use adb or dd in a terminal emulator to load a custom recovery or just load mobile ODIN. You can the use either of these to flash any custom rom without tripping the counter.
bj | SGH-I747M | Rogers | Rooted | ICS | CWR
Click to expand...
Click to collapse
Yes, this is true. But I guess we all add to our counter initially by flashing CWM through Odin when rooting, which our phone registers as an insecure kernel.
Sent from my SPH-D710 using xda app-developers app
So why is this not possible on the Sprint S3? Or is it possible now?
iniz94 said:
Yes, this is true. But I guess we all add to our counter initially by flashing CWM through Odin when rooting, which our phone registers as an insecure kernel.
Click to expand...
Click to collapse
FYI, I'm working on creating this file for T-Mobile GS3. If successful, I might try to create it for other carriers as well but will need help testing the files with the caveat that I might trigger your counter, I might brick your phone, and I might cause your phone to come alive and eat your dog.
I didn't find this forum and the method of rooting without tripping the counter until I had already loaded two roms. I can do an exchange at AT&T for a different color phone for $35 within the next 30 days. Should I get a new phone and start fresh or not worry about it and hope that Chainfire figures out a solution?
Chainfire will most likely find a way to reset it, but I don't think you'd be able to exchange with an activated counter. The counter really doesn't matter unless you want to get your phone replaced or something. Jigs used to help us reset the counter for the S2 even while the phone was off but now jigs don't work and the only way is Triangle Away for the S3
Sent from my SPH-D710 using xda premium
iniz94 said:
Chainfire will most likely find a way to reset it, but I don't think you'd be able to exchange with an activated counter. The counter really doesn't matter unless you want to get your phone replaced or something. Jigs used to help us reset the counter for the S2 even while the phone was off but now jigs don't work and the only way is Triangle Away for the S3
Click to expand...
Click to collapse
Chainfire said he's probably no longer updating the Triangle Away app any longer. Go see his blog/G+.
So we're sol?
Sent from my SPH-D710 using xda premium
Does the counter matter if you return your phone to a best buy with their black tie protection?
Sent from my SPH-L710 using Tapatalk 2
I heard BB employees can kill users who have Odin'd their phones. They are ordering special dumpsters to place to bodies of the violators. :angel::angel::angel:
Oh dear,I should've never exchanged my evo lte for this phone!
Sent from my SPH-L710 using Tapatalk 2
ghostyroasty said:
Oh dear,I should've never exchanged my evo lte for this phone!
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
unless you don't plan to return you phone you don't need to worry. I now I'm not!!!!
iniz94 said:
Yes, this is true. But I guess we all add to our counter initially by flashing CWM through Odin when rooting, which our phone registers as an insecure kernel.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Hmm I though CWM was flashed through adb not odin? With CWM installed I get a black screen with a unlock symbol and the words "Custom" underneath the lock before the boot-up animation and under setup>phone info>status it has Device Status 'Modified' but nothing about an unsecure kernel.
caguas56 said:
unless you don't plan to return you phone you don't need to worry. I now I'm not!!!!
Click to expand...
Click to collapse
I'm more worried about hardware failure like a mess up home button, or something of the sort.
Sent from my SPH-L710 using Tapatalk 2
Hi guys, i'm going to sell my galaxy s2 and the buyer want it all stock. I'm using the cm10 ROM on it. I've already downloaded the factory stock firmware on sammobile.com. Until there everything was ok, but now I'm not sure about the way to flash the stock firmware. Should I flash it by clockworkmod, as the customs Roms I've flashed before? Or should I flash it by Odin, like an unrooted phone?
Since now, thanks a lot for your help
Sent from my Nexus 7 using xda app-developers app
Flash it via Odin as PDA
Then wipe all in recovery
Sent from my GT-I9100 using xda app-developers app
when doing this, will the yellow triangle go away, phone get unrooted, and flash counter reset to 0?
cus im sure the buyer would want any avaliable warranty back aswell.
It would probably be good to reset counter before flashing, maybe with Triangleaway. Once i flashed original rom over custom with MobileOdin. Everything went well.
Sent from my GT-I9100 using xda premium
aliendna99 said:
when doing this, will the yellow triangle go away, phone get unrooted, and flash counter reset to 0?
cus im sure the buyer would want any avaliable warranty back aswell.
Click to expand...
Click to collapse
No, to reset counter and remove triangle you can do it either with a usb jig or by downloading chainfire app "triangle away" (Search it on the play store")
aliendna99 said:
when doing this, will the yellow triangle go away, phone get unrooted, and flash counter reset to 0?
cus im sure the buyer would want any avaliable warranty back aswell.
Click to expand...
Click to collapse
When u're flashing samsung stocks it'll does full wipe include rom itself, kernel, root, user data & caches then turn all to factory value. So don't even too worries about all u said above. But it worth to use stock 4.0.3 & avoid stock 4.0.4 in case to avoid emmc superbrick bug if u still doubt about advancing..
Sent from my GT-I9100 using xda app-developers app
If you flash a "samsung official rom" it will take the triangle away but it does not reset the counter.
I have flashed CM9 CM10 and 2.3 stock , 4.0 stock a few times and my count is at 7, each time i flash stock the triangle goes away but the counter keeps counting.
Hi, so I've had problems with what appears to be 'sudden death' - random freezes - unfortunately I havent been able to reset the flash counter before it all went to hell.
I can now ONLY enter my Download mode. While connected with Odin I get a yellow box when my phone is 'added',
I tried to flash stock Android back on my phone. This failed so I now only get the message "Firmware upgrade encountered an issue".
Only thing I want to do is reset the counter, so I can take it to Samsung. Otherwise I'm totally screwed. Any tips? :crying:
If you have i9300, use USB JIG... Last chance for you.
If you have i9305, you're screwed.
Sent from my GT-I9305 using xda app-developers app
usb jig doesn't affect the counter on the i9300
Glebun said:
usb jig doesn't affect the counter on the i9300
Click to expand...
Click to collapse
Upss, thought it does but I came from SGS2 straight to i9305 and didn't test it on i9300. Cheers
Sent from my GT-I9305 using xda app-developers app
It's been ages since Sgs2 supported Jig-based counter reset: more specifically not since 4.x bootloader.
Flash counter can only be reset through TriangleAway which at leased did use a custom update.zip to modify the storage so you could flash it. Modern bootloaders for s3 however also have a red triangle which cannot be reset to date (afaik)
Sent from my GT-I9300 using xda premium
d4fseeker said:
It's been ages since Sgs2 supported Jig-based counter reset: more specifically not since 4.x bootloader.
Flash counter can only be reset through TriangleAway which at leased did use a custom update.zip to modify the storage so you could flash it. Modern bootloaders for s3 however also have a red triangle which cannot be reset to date (afaik)
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
looks like im screwed. Found out: USB JIG does NOT reset the counter. This only worked on S2.
Talked to a guy at a phoneshop today, he said that 90% of the phones that have flash counts are still being repared by Samsung. So I see no other way than acting like nothing is up and see what Samsung will say.
Just to make sure, which version of Odin you've used? Sometimes it doesn't work on 1.85 but works on 3.0x
Sent from my GT-I9305 using xda app-developers app
d4fseeker said:
Modern bootloaders for s3 however also have a red triangle which cannot be reset to date (afaik)
Click to expand...
Click to collapse
wrong
djembey said:
Just to make sure, which version of Odin you've used? Sometimes it doesn't work on 1.85 but works on 3.0x
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
I tried to flash 3 different stock ROMs with 3 different versions of Odin: 1.85, 3.05 and 3.07.
No succes. I brought it to a gsm repair shop. Hope they can do something. All I need is access Android to reset the counter, and then Samsung can have it if the problem still occurs.
If they can't fix it, I'm gonna send it anyway and hope for the best.
So I guess it's a case of bad luck; sudden death (random freezes) in combination with a rooted phone --> First reset your flash counter!!!
I just updated to 4.3 and also change my CSC from XEF (France) to SER (Russia) Now I use CF Autoroot to root my phone and then when I tried to check update status via OTA it says that I modified my device.Now after searching google on what to do I end up with Triangle Away I followed all the intructions and whenever I tap on Flash Counter the notification prompts then afterwards nothing happens.
I want to stay on a stock rooted firmware so I do not know what to do. Any help will be greatly appreciated.
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
RETURN TO STOCK
http://forum.xda-developers.com/showthread.php?t=2323847
Root equals not OTA as described many times. You need counter 0 and original state which you only get by unrooting as far as I know.
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Root equals not OTA as described many times. You need counter 0 and original state which you only get by unrooting as far as I know.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Completely agree with you. Root means it is not stock. The device is modified.
@phaw16 - Every time you will boot into custom recovery, your flash counter will go back to 1. So no point in having or using TriangleAway if you want to stay rooted.
chrismast said:
Root equals not OTA as described many times. You need counter 0 and original state which you only get by unrooting as far as I know.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmm? The question is? How can you use triangle away of you are not rooted?
So you meant you can still use triangle away even if you are not rooted?
Well I dont really care about my warranty all I want is to recieve OTA updates even if my phone is rooted. Thats the main reason why I want my device status to be stock..
Sent from my GT-I9300 using xda app-developers app
phaw16 said:
Hmm? The question is? How can you use triangle away of you are not rooted?
So you meant you can still use triangle away even if you are not rooted?
Well I dont really care about my warranty all I want is to recieve OTA updates even if my phone is rooted. Thats the main reason why I want my device status to be stock..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
As far as i know if you're using Custom Recovery. Flash counter would always be 1. Try using Stock Recovery and reset it again.It would go to 0. As far as OTA im not sure i never use it before.
hierarchy666 said:
As far as i know if you're using Custom Recovery. Flash counter would always be 1. Try using Stock Recovery and reset it again.It would go to 0. As far as OTA im not sure i never use it before.
Click to expand...
Click to collapse
that depends on the bootloader version. If it is still an old on (I think JB) the counter will stay 0 even if rooted and rebooted. If its a newer version (ICS) and you use a custom recovery, it will be increased to 1 with each reboot.
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
phaw16 said:
Hmm? The question is? How can you use triangle away of you are not rooted?
So you meant you can still use triangle away even if you are not rooted?
Well I dont really care about my warranty all I want is to recieve OTA updates even if my phone is rooted. Thats the main reason why I want my device status to be stock..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
as said, OTA & root is not possible. You can update a rooted device via Kies though (you will loose root when update is applied).
hierarchy666 said:
As far as i know if you're using Custom Recovery. Flash counter would always be 1. Try using Stock Recovery and reset it again.It would go to 0. As far as OTA im not sure i never use it before.
Click to expand...
Click to collapse
Sorry to disappoint you sir but I was able to flash stock firmware 4.3 then flash CF Autoroot while the phone is on official status. If you install busybox or other recovery and kernels thats the only time your phone will detect it as custom. I also downloaded root protection app for google play so that when I recieve ota update I wont lose root
Sent from my GT-I9300 using xda app-developers app
In triangle away there is an option under system to allow trackers to run.
This in some cases can get rid of the modified state in the about phone part.
I tried it and it worked for me while I was on samsung