GPRS problem in CM7X roms. - Galaxy Ace S5830 General

lately, i have experienced that, all the new roms, based on cm7X, have gprs connectivity problem for bsnl, india sim cards.
as suggested by a developer (sorry, i forgot the name), i copied the apns-conf.xml file from stock rom to /etc folder in cm7 based rom. but gprs does not connect as it should.
many cm7 based roms do not have the apn settings for bsnl. if an apn is set manually, the story is same... no gprs.
has anyone faced this problem.
because of this, i am restricted to stock roms and could not enjoy fabulous roms developed by all the developers at xda.
thanks.

me also used to have the same problems
if you have 3g connection go to network preference choose auto mode and uncheck use only 2g
now you will be connected to 3g now go and chk use 2g only now mostly you will get data connection
some times going into airplane mode and then back into normal makes it connect
try it and hit thanks if helped

dnana_28 said:
me also used to have the same problems
if you have 3g connection go to network preference choose auto mode and uncheck use only 2g
now you will be connected to 3g now go and chk use 2g only now mostly you will get data connection
some times going into airplane mode and then back into normal makes it connect
try it and hit thanks if helped
Click to expand...
Click to collapse
have tried all the permutations and combinations. but connectivity is never for sure like stock rom.
may be a handicap in cm7.

Related

[Q] Mobile Data not reconnecting after WiFi drops

Hey all,
I have a very odd problem that is actually apparent in the HTC Desire forums by 2 other people. (found using the search that comes up when starting a new thread)
When I use my phone on WiFi the data is automatically turned off (I'm assuming because WiFi takes priority, however when WiFi drops, the data does not reconnect and I am left with just the reception bars for SMS/Calling.
To fix this I must either cycle aeroplane mode or go to Settings > Wireless and Networks > Mobile Networks > Access Point Names > Vodafone Internet and then when I'm in the editing screen for that APN the data reconnects.
I have tried making a shortcut directly to the APN settings using LauncherPro activities shortcut but the data will only reconnect if I take the long way (or cycle aeroplane mode as it is a quicker fix)
Please help, this is very annoying as my data doesn't reconnect when I leave my home WiFi in the mornings until I notice it half way through the day.. missing many important emails
Thanks in advance.
- DarkRyoushii
u could use a widget to toggle the APN (extenedcontrols)
but i had the same problem on my old Desire from Telstra until it was updated to Froyo and then i never had the problem again.
What firmware version are you running? Also are you running Gingerblur, gladatrix or stock?
1.57 with gingerblur. Thanks for the tip about toggling the apn I will try that soon
Sent from my MB860 in Australia

[Q] Wifi WPA Problem

All of a sudden, I cannot access WPA2 networks on wifi anymore. WEP networks work fine. My school's WEP network conebut when I try to connect to a WPA2 network, here's what happens:
1. phone connects successfully.
2. open browser
3. attempt to load google/yahoo/cnn/bing
4. loading inevitably fails
Does anyone have the same problem? Any proposed fixes?
Wolfbreak's CM ROM. BB58. THANKS!
Hey,
I'm having major problems with wifi on my x10. Yesterday, the phone suddenly couldn't access the internet over my home wifi network, which has a WPA2 personal passphrase. The phone still showed up as connected to the network, but could not get online. I reflashed my x10 with SEUS twice, reformatted my memory card, triple checked my router settings, but no matter what I do, I cannot get WPA2 personal keys to work. WEP keys work perfectly. Does anyone have the same problem? Can anyone help me out?
Baseband .54
Stock Android 2.1
Thanks!
For a lot of custom roms, the ability to automatically connect to WPA- and even some WEP-encrypted networks is a challenge, and not many people seem to know the specific reason for it.
A lot of people have been using a free app from the Market called Blade Wifi Fix, which has mixed results (I haven't had it work for me, but it does for other people).
The fix I use is to disable Wifi, then re-enable it, wait for it to show Disabled on my wifi access point, then choose it and press connect. That usually works for me. But again, that's just for me.

[Q] 3g connection problem?

i noticed that my galaxy s 2 has some problems connecting to our 3g network here in taiwan
whenever i put my network setting to auto 3g/wcdma OR only wcdma, my connection keeps getting dropped, itll work for a while then disconnect, then reconnect, and so on
but when i just use "only gsm" it will work but it is very slow
and i was wondering about this because in auto mode, shouldnt it still be able to work since it will just automatically use gsm if wcdma is not enough?
i tried it with several roms and kernels, along with restoring a taiwan csc, but it still shows this problem
i was wondering if this was a common problem, or if it is a problem with my network provider
You can try to Lookup fast dormancy if like. and toggle yours to off or on as needed. Either change the nwk_info as i did or *#9900# for a setting change that does not survive reboot.
Sent from my GT-I9100 using Tapatalk
crypticc said:
You can try to Lookup fast dormancy if like. and toggle yours to off or on as needed. Either change the nwk_info as i did or *#9900# for a setting change that does not survive reboot.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
i think the problem i have is that the 3g signal here in my area is weak, so when it is in auto mode, it detects a bit of 3g so it doesnt change back to gsm
i read a lot of threads saying that it would be better to put the network setting to gsm auto prl, but when i try to change to this setting, it doesnt stick

Data Network.. Internet not working...

Hello everyone, I have a problem, I have used my internet 3G few weeks ago just fine, but now it's not working. APN is configured, tried several different configs, but nothing.. now it's default... I hold power button > Data network mode > it still says deactivated... I don't know whats the problem? Anyone, help? Thanks.
Im using 2.3.6 and CF-Root.
This wont probably solve anything but I occasionally have to force my phone to only use 2G before it finds the network. I will then turn off that option to make my phone find the 3G network.
QNBT said:
This wont probably solve anything but I occasionally have to force my phone to only use 2G before it finds the network. I will then turn off that option to make my phone find the 3G network.
Click to expand...
Click to collapse
Nope, didn't solve the problem, but thanks anyway.
So what did you do inbetween? No reflash or anything like that?

Question Failing to switch to cellular data with "Mobile data always active" switched off

If I go into developer settings and switch off Mobile data always active (in an attempt to save a little power when the phone is on Wifi), I find the phone often doesn't enable data when I leave Wifi. I have to cycle airplane mode to make it do it.
Anyone else finding the same bug? Or even using this setting?
I've had dropped connection issues since day 1, with airplane mode being the only way to restore my connection. And this was with Mobile Data always active set to on.
Who is your Carrier??
Have you noticed similar issues even with mobile data always active?
When I go to building with no cellular and come back outside. The phone doesn't automatically reconnect to cellular, leaving me with no service. What a strange bug.
JonnyTrulove said:
I've had dropped connection issues since day 1, with airplane mode being the only way to restore my connection. And this was with Mobile Data always active set to on.
Who is your Carrier??
Have you noticed similar issues even with mobile data always active?
Click to expand...
Click to collapse
EE in the UK. Works fine almost all the time so far if I keep mobile data active.
Vodafone Romania, toggled the setting off in dev options as soon as I got the phone. Data switching works fine still.
Try going into the testing menu (dialer code *#*#4636#*#*), select phone information, select 3dot menu on top right corner, try switching around between Europe and automatic. I'm my case ,selecting Europe presented various weird connection issues , biggest of which was that the phone refused to connect to LTE unless I used "automatic".

Categories

Resources