Related
hi guys, first post
ive had my rooted galaxy s2 with the latest siyah kernel 3.3.2, i had cwm recover 5 and rom manager
i tried to flash cyanogen mod through rom manager, following the steps it gave me, i downloaded the files through rom manager and went through all the prompts till i clicked agee to go into recovery mode.
once it did that the phone shut off but would not turn on again so i went to turn on manually, it loads the samsung galaxy screen with the yellow triangle but goes straight into a white flashing screen.
Ive tried taking the battery out, leaving it and putting it back in again, still a flashing screen,
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
atifsh said:
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
Click to expand...
Click to collapse
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
MistahBungle said:
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
Click to expand...
Click to collapse
awesome, I tried flashing the latest siyah kernel, the one that i already had on my phone before the problems, that didn't do anything to get me through, any suggestions on which kernel/rom to flash?
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
atifsh said:
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
Click to expand...
Click to collapse
ohh sweet baby jesus im i flashed a cf kernel and now im into cwm on 4.0.1.5, can i just normal reboot my phone now?
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
From then on, if you want to flash CM9 nightlies, do it via CWM/CWRecovery, just don't use Rom Manager this time I use CM9 as well & I have it frozen because I use Siyah (which has CWM).
MistahBungle said:
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
Click to expand...
Click to collapse
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
i still say wipe first, cm9 will come with its own latest cwm that can be used to flash any custom roms after.
flashing via odin version is easy and fool proof as it has everything bundled for correct working of cm9.
If you flash CM9 the CM9 kernel will overwrite/replace your CFRoot kernel, which is fine. As I said in my previous post you can stick with that if you're happy with it, or you can flash any other kernel that's CM9 compatible.
No suggestions/recommendations. Because your experience will not be the same as someone else's using a given rom or kernel. If you want to go down that path, try some kernels to find one you like. To see if a kernel is compatible with CM9, read the the dev thread devoted to the kernel in question.
OK. Given you're back @ square one, Atifsh is right when he says flashing the Resurrection version (Odin version) then flashing Gapps/nightly from there is probably a good way to go for you. Once you've done that, you'll be able to flash CM9 nightlies via CWRecovery. As said previously, read that first page of the CM9 discussion thread/instructions thoroughly before you do anything.
keegan25 said:
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
Click to expand...
Click to collapse
Something similar happened to me too. I flashed stock XWLPG, then siyah 3.3.2 and did a factory reset. After that, got stuck in a flashing white screen after the yellow triangle.
What I did: boot on download mode, flash XWLPG over PC Odin once more, did a full wipe BEFORE flashing siyah and then siyah. Everything went ok this time, but eventually I found out that every time I do a factory reset after siyah that problem would occur.
Regards,
Sent from my GT-I9100 using XDA
keegan25 said:
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Click to expand...
Click to collapse
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
acbutcher91 said:
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
Click to expand...
Click to collapse
Power + vol down + home key?
OK I have read creepy's guide and several other ones and downloaded all the files.
So far the steps that I understand:
1. Recovery Wipe
2. Download Mobile Odin on your phone
3. Use Mobile Odin to flash custom kernel by selecting zImage file. (Apparently I need to use a gingerbread Kernel even though I am going to ICS? this I also don't really understand)
4. He says you can use Mobile Odin to flash a ROM but never explains how. The way I did this before is by loading a .tar file into the PDA section of ODIN on PC and then just clicking start while my phone is in download mode. I looked into Mobile Odin and found no option saying ROM or PDA. My options are Kernel, System, Data, Cache, Param, Modem, or Hidden. So where do I load the .zip/.tar file?
Help would be very appreciated thank you.
You can not use GB kernel on ICS rom. To flash kernel you should put zImage to kernel section on mobile odin and push flash firmware.
To flash rom via mobile odin you should put tar or md5 rom file to system section of mobile odin. Push flash firmware.
fakhri said:
You can not use GB kernel on ICS rom. To flash kernel you should put zImage to kernel section on mobile odin and push flash firmware.
To flash rom via mobile odin you should put tar or md5 rom file to system section of mobile odin. Push flash firmware.
Click to expand...
Click to collapse
if the zImage file is inside of the .tar file does that mean flashing the ROM will automatically flash the kernel as well?
Also creepy specifically states to use a gingerbread kernel, "You must use a Gingerbread kernel when using this method. If you use an ICS kernel while your phone is running Gingerbread, it will not boot!!!"
Sky` said:
if the zImage file is inside of the .tar file does that mean flashing the ROM will automatically flash the kernel as well?
Also creepy specifically states to use a gingerbread kernel, "You must use a Gingerbread kernel when using this method. If you use an ICS kernel while your phone is running Gingerbread, it will not boot!!!"
Click to expand...
Click to collapse
If tar or md5 file have zImage, mobile odin will leave old kernel.
If you want to flash ICS rom You should put tar or md5 file of rom in system and ICS kernel of this rom in kernel.
f you want to flash GB rom You should put tar or md5 file of rom in system and GB kernel of this rom in kernel.
Creepy states don't mix GB kernel with ICS rom and v.v.
If rom file have inside hidden, modem, zImage, system (factoryfs), cache. You can on mobil odin push "open file or archive .tar, .tar.md5, .exe, and separate file" and choose rom tar or md5 file. Mobile odin will put all file in right plase.
fakhri said:
If tar or md5 file have zImage, mobile odin will leave old kernel.
If you want to flash ICS rom You should put tar or md5 file of rom in system and ICS kernel of this rom in kernel.
f you want to flash GB rom You should put tar or md5 file of rom in system and GB kernel of this rom in kernel.
Creepy states don't mix GB kernel with ICS rom and v.v.
Click to expand...
Click to collapse
Apparently these are all .zip files? How am I suppose to do this using .zip files?
This is the ROM I am trying to flash:http://forum.xda-developers.com/showthread.php?t=1650948
The .zip file has only 5 files inside of it when extracted, cache.img, factoryfs.img, hidden.img, modem.bin, and zImage with no specified file extension.
When you said it will "leave the old kernel" do you mean it will leave it in place, or leave it to the new kernel inside of the .tar file?
So should I extract the .zip file use the zImage as my kernel and load the whole .tar file under system?
Or do I need to use a different kernel like fluxxi?
EDIT: I was also curious about this ROM, would it be difficult to install? http://forum.xda-developers.com/showthread.php?t=1752232
Sky` said:
This is the ROM I am trying to flash:http://forum.xda-developers.com/showthread.php?t=1650948
The .tar file has only 5 files inside of it when extracted, cache.img, factoryfs.img, hidden.img, modem.bin, and zImage with no specified file extension.
When you said it will "leave the old kernel" do you mean it will leave it in place, or leave it to the new kernel inside of the .tar file?
So should I extract the .tar file use the zImage as my kernel and load the whole .tar file under system?
Or do I need to use a different kernel like fluxxi?
EDIT: I was also curious about this ROM, would it be difficult to install? http://forum.xda-developers.com/showthread.php?t=1752232
Click to expand...
Click to collapse
First rom you should open with "open file" and mobile odin will put all him self. And you can flash. Kernel and modem will be changed to rom kernel and modem.
Second rom is not difficult but you should flash with cwm recovery.
fakhri said:
First rom you should open with "open file" and mobile odin will put all him self. And you can flash. Kernel and modem will be changed to rom kernel and modem.
Second rom is not difficult but you should flash with cwm recovery.
Click to expand...
Click to collapse
Sorry I gave you the wrong link for the first ROM, I have like 20 tabs open trying to figure this out.
this is the one I meant: http://forum.xda-developers.com/showthread.php?t=1746181
and it is a .tar file
Also for the second link, I'm guessing CWM is Clockwork Mod? is this a mobile software or PC based? I googled it and went to their main website and found no download link for anything similar to ODIN. I also searched for cwm recovery in play store and found an app called rom manager, is this it?
Thanks a bunch for your help, I really do appreciate this
Rahmat Aytmoq
Sky` said:
Sorry I gave you the wrong link for the first ROM, I have like 20 tabs open trying to figure this out.
this is the one I meant: http://forum.xda-developers.com/showthread.php?t=1746181
and it is a .tar file
Also for the second link, I'm guessing CWM is Clockwork Mod? is this a mobile software or PC based? I googled it and went to their main website and found no download link for anything similar to ODIN. I also searched for cwm recovery in play store and found an app called rom manager, is this it?
Thanks a bunch for your help, I really do appreciate this
Click to expand...
Click to collapse
It's same. put in "open file".
After installing rom you can change kernel via mobile odin.
After installing you will have a root and it' very easy.
You can change kernel to siyah kernel nomswap http://www.mediafire.com/?81odsaa6o6ib165. Take from zip file zImage and install via mobile odin. After you will have root and cwm recovery.
But it is for I777 based stock rom. For other rom you should install siyah mswap http://www.mediafire.com/?vihwj8l5wv8v263
fakhri said:
It's same. put in "open file".
After installing rom you can change kernel via mobile odin.
After installing you will have a root and it' very easy.
You can change kernel to siyah kernel nomswap http://www.mediafire.com/?81odsaa6o6ib165. Take from zip file zImage and install via mobile odin. After you will have root and cwm recovery.
But it is for I777 based stock rom. For other rom you should install siyah mswap http://www.mediafire.com/?vihwj8l5wv8v263
Click to expand...
Click to collapse
Ok great I know have all the files selected in mobile odin. I wanna go over this with you one more time before i begin the flash to make sure I made no mistakes.
1. I did not do a factory reset because I am still on gingerbread(rooted) is this ok?
2. I used "open file" as you said and it placed all the proper files in the right location.
3. There are two options that I'm not sure what they do, "wipe data and cache" and "Wipe Dalvik cache" Should I check both of these?
As soon as you tell me I'm fine ill start the flash! thanks again!
I impatiently started the flash I hope i didnt mess anything up
Sky` said:
Ok great I know have all the files selected in mobile odin. I wanna go over this with you one more time before i begin the flash to make sure I made no mistakes.
1. I did not do a factory reset because I am still on gingerbread(rooted) is this ok?
2. I used "open file" as you said and it placed all the proper files in the right location.
3. There are two options that I'm not sure what they do, "wipe data and cache" and "Wipe Dalvik cache" Should I check both of these?
As soon as you tell me I'm fine ill start the flash! thanks again!
Click to expand...
Click to collapse
If you from GB check both.
I didnt check both and already started the flash!
It already finished flashing and it seems to be working just fine except my phone feels hotter then normal I hope this isnt a heating issue.
Sky` said:
I didnt check both and already started the flash!
It already finished flashing and it seems to be working just fine except my phone feels hotter then normal I hope this isnt a heating issue.
Click to expand...
Click to collapse
It's matter of after flash only.
I think you need to do a lot more reading if you're going to continue flashing roms
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
I think you need to do a lot more reading if you're going to continue flashing roms
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
The flash was successful though! Running ICS no problem and no more heating issue.
I wish I could customize the lock in the lock screen. Not a big fan of the small lock.
Anyway it works fine ! thanks for the help
Sky` said:
The flash was successful though! Running ICS no problem and no more heating issue.
I wish I could customize the lock in the lock screen. Not a big fan of the small lock.
Anyway it works fine ! thanks for the help
Click to expand...
Click to collapse
That would require flashing another rom, see what I mean?
Sent from my SGH-I777 using Tapatalk 2
Nick281051 said:
I think you need to do a lot more reading if you're going to continue flashing roms
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
+1 lots more reading needs to be done you need to wipe data and cache and dalvik cache always before flashing a new rom
Sent from my SGH-i777 using XDA
What is the importance of wiping data/cache before flashing?
Sky` said:
What is the importance of wiping data/cache before flashing?
Click to expand...
Click to collapse
It ensures that there are no "left behinds" from prior ROMs or kernels that could (and often do) conflict with the new firmware you're flashing. Many of the problems that people tend to blame on ROMs or kernels are actually often resolved when they go back and wipe fully before the install. May as well get it out of the way in the first place instead of ending up pulling your hair out (or frustrating the dev enough to do the same) because it wasn't done with a clean slate.
xhepera said:
It ensures that there are no "left behinds" from prior ROMs or kernels that could (and often do) conflict with the new firmware you're flashing. Many of the problems that people tend to blame on ROMs or kernels are actually often resolved when they go back and wipe fully before the install. May as well get it out of the way in the first place instead of ending up pulling your hair out (or frustrating the dev enough to do the same) because it wasn't done with a clean slate.
Click to expand...
Click to collapse
Right now I'm having one problem, wallpaper scrolling is not working after flashing creepy's ICS ROM. Is this because I did not wipe before hand?
Every ROM zip file I attempt to flash via CWM or TWRP doesnt work. I was on stock ICS (4.0.4) which I flashed using Odin. Every JB rom, stock or custom I attempt to flash with a recovery freezes either at boot up or first screen of initial setup. No errors are given on actual flash, it always looks good. . I wiped everything I can wipe, which is everything but emmc I think. What could be the problem? I have now flashed official JB through Odin twice with no issues.
Do you check that the ROM is downloaded properly by checking the md5 hash?
EVOO2 said:
Every ROM zip file I attempt to flash via CWM or TWRP doesnt work. I was on stock ICS (4.0.4) which I flashed using Odin. Every JB rom, stock or custom I attempt to flash with a recovery freezes either at boot up or first screen of initial setup. No errors are given on actual flash, it always looks good. . I wiped everything I can wipe, which is everything but emmc I think. What could be the problem? I have now flashed official JB through Odin twice with no issues.
Click to expand...
Click to collapse
Try flashing a new recovery using odin then try to flash the rom in recovery afterwards.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
Try flashing a new recovery using odin then try to flash the rom in recovery afterwards.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Ive flashed twrp 2.5 twice through odin and then tried to flash a rom with no improvement. Im really stumped 'cause flashing roms with odin works fine everytime, so it would seem nothings physically wrong with my device. Should I try a different recovery program? Using cwm and twrp give the same result, so Im skeptical a third recovery would be any different.
cheers
EVOO2 said:
Ive flashed twrp 2.5 twice through odin and then tried to flash a rom with no improvement. Im really stumped 'cause flashing roms with odin works fine everytime, so it would seem nothings physically wrong with my device. Should I try a different recovery program? Using cwm and twrp give the same result, so Im skeptical a third recovery would be any different.
cheers
Click to expand...
Click to collapse
Only thing i can think of is look at the file format that youre trying to flash.
Is it zip? tar?
I may be wrong but cwm only works for .zip files from my experience. not .tar md5 etc.
why do you need to flash it via cwm? if its flashing through odin whats the problem?
It sounds like what ^^^^ is saying. Recovery flashes zip files and Odin flashes tar files. Don't confuse the zip files your pc uses to download the files with these.
When using odin I have to use ROM s which are .tar, so this basically limits me to stock ROMS. The custom ROMS are .zip which I can only flash with a custom recovery like twrp or cwm. I'd obviously like to flash the custom ROMS which are .zip , however it isn't working for me as I mentioned in the opening post . Not sure how to fix this problem .
EVOO2 said:
When using odin I have to use ROM s which are .tar, so this basically limits me to stock ROMS. The custom ROMS are .zip which I can only flash with a custom recovery like twrp or cwm. I'd obviously like to flash the custom ROMS which are .zip , however it isn't working for me as I mentioned in the opening post . Not sure how to fix this problem .
Click to expand...
Click to collapse
extraxt the rom that your saying is .zip. it "should" extract a file that will be something odin will recognize
dweeezy said:
extraxt the rom that your saying is .zip. it "should" extract a file that will be something odin will recognize
Click to expand...
Click to collapse
Good idea. In a recovery zip file will be a couple of folders. One of them will have a tar file you can flash in the phone or pda a lot in Odin.
Thanks for the suggestion but I had no luck . I have tried extracting padawan JB and a debloated stock JB rom and they extract many files, folders, apks but no tar I could locate. Also I am not sure even if there was a tar i could use if it would be safe to use. If all this was good, it would still be a cumbersome workaround and wouldnt fix my problem of not being able to get a ROM installed via recovery to work.If I have no choice I'll use odin to flash custom ROMs (if there is a way) but Id rather get it to work with recovery.
EVOO2 said:
Thanks for the suggestion but I had no luck . I have tried extracting padawan JB and a debloated stock JB rom and they extract many files, folders, apks but no tar I could locate. Also I am not sure even if there was a tar i could use if it would be safe to use. If all this was good, it would still be a cumbersome workaround and wouldnt fix my problem of not being able to get a ROM installed via recovery to work.If I have no choice I'll use odin to flash custom ROMs (if there is a way) but Id rather get it to work with recovery.
Click to expand...
Click to collapse
If you're flashing between TW based to AOPS, or pretty much from a rom to a completely different rom, you will need to WIPE your data too, or better, do a complete wipe (factory reset). I had this issue when moving from Stock TW-based rom to Padawan JB rom. I did a factory reset (complete wipe) and it booted fine. But then again, I'm used to TW so I flashed that back.
fbauto1 said:
If you're flashing between TW based to AOPS, or pretty much from a rom to a completely different rom, you will need to WIPE your data too, or better, do a complete wipe (factory reset). I had this issue when moving from Stock TW-based rom to Padawan JB rom. I did a factory reset (complete wipe) and it booted fine. But then again, I'm used to TW so I flashed that back.
Click to expand...
Click to collapse
I've wiped everything I can wipe between flashes (includes factory reset), many times trying both TWRP and CWM for flashing and wiping with no luck unfortunately. The wiping doesnt seem to help, different custom recoveries don't help, so I'm stumped as to what the problem could be.
EVOO2 said:
I've wiped everything I can wipe between flashes (includes factory reset), many times trying both TWRP and CWM for flashing and wiping with no luck unfortunately. The wiping doesnt seem to help, different custom recoveries don't help, so I'm stumped as to what the problem could be.
Click to expand...
Click to collapse
What roms are you trying to flash? Sometimes ive seen where you must rename them or do specific things.
dweeezy said:
What roms are you trying to flash? Sometimes ive seen where you must rename them or do specific things.
Click to expand...
Click to collapse
Ive tried padawan JB, debloated rooted canadian JB rom, and debloated ATT rom.
dweeezy said:
What roms are you trying to flash? Sometimes ive seen where you must rename them or do specific things.
Click to expand...
Click to collapse
Ive tried padawan JB, debloated rooted canadian JB rom, and debloated ATT rom.
OP, are you still having this issue? Were you able to resolve it?
I have the exact same issue as you. Exactly the same.
513263337 said:
OP, are you still having this issue? Were you able to resolve it?
I have the exact same issue as you. Exactly the same.
Click to expand...
Click to collapse
Me too. Every rom freezes during the app optimization screen...usually at about 3/4th the way through. What's going on???
*edit* Tried to restore factory w/Odin. I'm bricked now. Time for some JTAG love.
Exactly the same issue here.
Every jelly bean ROM, 4.1 or 4.2, stock or custom, as long as I install them via recovery, it either doesn't boot up or gets stuck on the first screen.
If I use ODIN to install the stock ROM, it works fine.
Driving me nuts...
Just throwing suggestions out there but try sideloading the rom and see if itll install that way? Also are you odin flashing recovery? Maybe try to load twrp through goomanager and see if maybe recovery is corrupted?
Sent from my SAMSUNG-SGH-I717 using xda premium
[Solved]
I am unable to flash any roms through cwm, and can only do it through odin. Flashing through cwm results in the phone not loading past the boot logo.
I formatted sd card in cwm, thinking it would only restore to factory settings, not knowing it would completely wipe everything.
From then i was unable to even see the boot logo or recovery mode, but luckily download mode still worked.
So i flashed the stock rom through odin, but it still plays up. Now the battery doesn't last more than 1 day, and constantly freezes.
Now whenever i install anything in cwm, as soon as i reboot, it goes to the bootscreen and freezes. I have tried at least 5 different roms and the same story each time, So each time i have to reflash stock rom with odin.
So any ideas to why this is? any help is appreciated. I have tried ultimate kernel wipe cleaner , or whatever it is called as well.
[Solved]
I just reflashed stock ICS in odin, and ticked the 're-partition' box. the repartition file is called " u1_02_20110310_emmc_EXT4.pit ". Now it works good as new and I'm currently running PACman rom on 4.3. gg guys.
Just to check, but you have factory reset after flashing the new ROM from CWM right?
Try these steps :
1. Flash ROMNuke script by hawkerpaul. (it's a ROM nuke, not just a kernel nuke)
2. Flash ROM in CWM.
3. Boot.
I know it sounds simple, but that's got me out of a few odd bootloop /failed flash situations. Give it a go.
Then, if that doesn't work, re-download the ROM which you're attempting to flash & try again.
One more thing, what kernel are you trying to flash the ROM from in CWM? Try a different one, say siyah. I've sometimes seen where a particular kernel won't flash but another will for no apparent reason.
Sent from a galaxy far, far away
Hopper8 said:
Just to check, but you have factory reset after flashing the new ROM from CWM right?
Try these steps :
1. Flash ROMNuke script by hawkerpaul. (it's a ROM nuke, not just a kernel nuke)
2. Flash ROM in CWM.
3. Boot.
I know it sounds simple, but that's got me out of a few odd bootloop /failed flash situations. Give it a go.
Then, if that doesn't work, re-download the ROM which you're attempting to flash & try again.
One more thing, what kernel are you trying to flash the ROM from in CWM? Try a different one, say siyah. I've sometimes seen where a particular kernel won't flash but another will for no apparent reason.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
it was stock ics cwm i think?, also another thing when I install a new rom, when it shows the progress bar, it goes up to 3 quarters then it skips the rest and says update completed (I just tried Romnuke and same story). I have also tried siyah kernel and it just freezes at the siyah kernel instead. Im currently stuck on stock ICS 4.0.2
Not sure what you mean by 'stock ICS CWM'?
And just to make sure, you definitely have an i9100 right? Not a variant, i9100g etc? Just asking as 4.0.2 was never released for i9100, only 4.0.3 and 4.0.4 (stay away from that one)
So now, re-download the ROM which you're attempting to flash, and try again after the ROMNuke script. Does the script run successfully? Or does it have errors /messages which indicate it didn't run successfully?
Sent from a galaxy far, far away
Hopper8 said:
Not sure what you mean by 'stock ICS CWM'?
And just to make sure, you definitely have an i9100 right? Not a variant, i9100g etc? Just asking as 4.0.2 was never released for i9100, only 4.0.3 and 4.0.4 (stay away from that one)
So now, re-download the ROM which you're attempting to flash, and try again after the ROMNuke script. Does the script run successfully? Or does it have errors /messages which indicate it didn't run successfully?
Sent from a galaxy far, far away
Click to expand...
Click to collapse
my bad it is 4.0.3, it is definitely only gt-i9100, and in recover mode it says CWM-based Recover v5.0.2.7
kobe24lebron23jordan said:
my bad it is 4.0.3, it is definitely only gt-i9100, and in recover mode it says CWM-based Recover v5.0.2.7
Click to expand...
Click to collapse
All good. And also good that you have an i9100.
Ok, so have you tried the things I said?
1. Try flashing from a different kernel (your choice, try one other than Siyah)
2. Re-download the ROM & reflash with Nuke script then ROM.
[Solved]
5 months later I found the answer when messing with odin. What you do is tick the 're-partition' box, and then in the 'pit' sections you need the partition file i guess, for the i9100 its called u1_02_20110310_emmc_EXT4.pit . hope this helps anyone else who may have this problem
I'm currently on pacman ROM v22. and i want to go back to stock jelly bean. I do have a nandroid backup but when I try to restore it fails. I guess its because of the latest cwm I.e. v 6.0.4. right? how should I restore the backup now? please help.. I'd be thankful
(galaxy s2 at&t sgh i777)
If you know what version of recovery you used to make the backup, install the kernel with that version of recovery. If the kernel does not match your current operating system, the phone will not boot into the system, but it should boot into recovery and allow you to restore the backup.
Or you could just flash the I777UCMD8 stock firmware with Odin, which you can download from the Download Repository.
as far as I remember I used v6.0 of cwm with the stock kernel.. yeah I was using stock kernel when I had v 6.0 of recovery.. should I downgrade to v6.0 cwm and try?
so I downgraded cwm to 6.0.1.0.. I guess that's the version I was using when I made backup.. tried to restore.. error: MD 5 mismatch
what does it mean?
new problem occurred.. :/
I downgraded recovery to 6.0.1.0 now I can't update it back to 6.0.4.5.. rebooted system.. and booted it back to recovery now that when I try to upgrade cwm I get error: couldnt mount SD card.. and when I checked my kernel has been replaced with cynogenmod #1 from aj kernel.. how should I get back the cwm 6.0.4.5 (I have .zip file is SD card but it won't mount in cwm) please help!
***ignore this I got it back working***
just tell me how can I restore the backup of my stock jelly bean
You can defeat the md5 check if you are absolutely certain that the nandroid backup is not corrupted. Sometimes just changing the file name of a nandroid backup will mess up the md5 sum, but the file is still good. But if you try to install a corrupt nandroid file by defeating the md5 check, you can do serious harm to the phone.
In this case I would not recommend even going there. It's no problem to flash the stock firmware using Odin. Yes, you will need to perform a wipe data/factory reset first, and yes you will lose your apps and personal settings, but there are backup programs for that. I would recommend this route.
inalicse ourings
okay but I didn't make any changes on the nandroid backup..
i have a question.. i'm using unlocked at&t here in india.. will upgrading firmware from odin lock my phone again?
and thanks for your help
There's also the option of using titanium backup restore the apps and settings of your nandroid backup.
settings > extract from nandroid backup > [select backup] > choose which apps/data that you want to restore.
-Cyril
imohitahuja said:
okay but I didn't make any changes on the nandroid backup..
i have a question.. i'm using unlocked at&t here in india.. will upgrading firmware from odin lock my phone again?
and thanks for your help
Click to expand...
Click to collapse
well that's cool cryil.. but unfortunately I have no app & data backed up in my nandroid backup.. its just the stock ROM and settings.. while I was flashing the latest cwm I by mistake deleted my phone data.. so there is nothing just the stock ROM..
I just want to restore my nandroid backup to return to stock ROM.. I am away from PC for sometime so flashing with Odin is not possible at the moment.. I don't know what to do now..
(please also see the other thread by me)
thanks
is there any way to flash stock firmware through cwm.. I have cwm manager and it has a feature which says *flash the stock firmware* but I don't know how to use it... I don't care if I lose root access and cwm..
imohitahuja said:
is there any way to flash stock firmware through cwm.. I have cwm manager and it has a feature which says *flash the stock firmware* but I don't know how to use it... I don't care if I lose root access and cwm..
Click to expand...
Click to collapse
I'm not sure about that one.
But, you can still boot into your custom rooted firmware? If so, you can use Mobile Odin Pro or Mobile Odin Lite to flash the stock firmware from the phone.
yeah mobile Odin I have heard about it.. how to flash firmware with mobile Odin? we have to extract the .zip right? can you please tell me step wise procedure?
thanks once again
5 bucks says he's using Rom Manager app. Because clearly that'd be causing him issues.
yeah phalanx you're absolutely right. I flashed cwm recovery from ROM manager.. I didn't read stickies.. so I was not aware about the ROM manager causing problem thing.. anyways I got v6.0.1.0 of cwm after flashing from ROM manager.. I reeboted phone successfully.. checked kernel.. it was still the stock kernel.. If I'm not wrong flashing cwm replaces the kernel? anyways.. then I booted to recovery.. made nandroid backup.. upgraded cwm to 6.0.4.5.. flashed pacman ROM successfully.. and now that when I want to restore the nandroid backup it gives MD 5 mismatch error.. any suggestions ?
imohitahuja said:
yeah mobile Odin I have heard about it.. how to flash firmware with mobile Odin? we have to extract the .zip right? can you please tell me step wise procedure?
thanks once again
Click to expand...
Click to collapse
imohitahuja said:
yeah phalanx you're absolutely right. I flashed cwm recovery from ROM manager.. I didn't read stickies.. so I was not aware about the ROM manager causing problem thing.. anyways I got v6.0.1.0 of cwm after flashing from ROM manager.. I reeboted phone successfully.. checked kernel.. it was still the stock kernel.. If I'm not wrong flashing cwm replaces the kernel? anyways.. then I booted to recovery.. made nandroid backup.. upgraded cwm to 6.0.4.5.. flashed pacman ROM successfully.. and now that when I want to restore the nandroid backup it gives MD 5 mismatch error.. any suggestions ?
Click to expand...
Click to collapse
You can not install a .zip package with Mobile Odin. You can install the stock I777UCMD8 4.1.2 ICS firmware with Mobile Odin. Mobile Odin recognizes .tar and .tar.md5 files. The stock distribution, which you can download from the Download Repository, (see link in my signature) is a .tar.md5 file. Mobile Odin requires root access, so the following assumes you have a rooted firmware on the phone that will fully boot into the system.
Download Mobile Odin from this thread. Download the flash kernel from post #10 of the same thread. Install both apk's on your phone.
Download the UCMD8 .tar.md5 to the root of the internal sd card. I hope you have access to wifi because that is a pretty large file. Boot into recovery and perform a wipe data/factory reset. Boot back into the system. Mobile Odin will now recognize the .tar.md5 file so that you can flash it. Once you flash it, you will have lost root, and will have fully stock firmware and kernel.
wowie thanks for your help bro! downloading the .tar.md5 .. last question by my side.. I didn't use mobile Odin ever before.. so I dont understand what's that thing? I mean as I have .tar.md5 file I will then just have to click on flash firmware?? or there is something I am missing?
imohitahuja said:
wowie thanks for your help bro! downloading the .tar.md5 .. last question by my side.. I didn't use mobile Odin ever before.. so I dont understand what's that thing? I mean as I have .tar.md5 file I will then just have to click on flash firmware?? or there is something I am missing?
Click to expand...
Click to collapse
Once you have both the main application and the flash kernel installed on your phone, open Mobile Odin, scroll down and touch Open file..., select internal sdcard, and then select the .tar.md5. You should be able to figure out the rest from there.
I successfully flashed i777UCMD8 from mobile odin and didnt even lose root.. thanks creepyncrawly!
I'm having problem connecting mouse from otg.. when I try to connect my phone turns off and takes so much time to start..?? also i am having problem connecting hdmi through mhl.. keeps on connecting and disconnecting..??
imohitahuja said:
I successfully flashed i777UCMD8 from mobile odin and didnt even lose root.. thanks creepyncrawly!
Click to expand...
Click to collapse
Glad to help.
I'm having problem connecting mouse from otg.. when I try to connect my phone turns off and takes so much time to start..?? also i am having problem connecting hdmi through mhl.. keeps on connecting and disconnecting..??
Click to expand...
Click to collapse
I do not have any direct experience with either of these issues. Maybe someone else will be able to answer.
some other guy told me to try flashing any other kernel? can I use any custom kernel with stock jelly bean? which one?