after flashing I9100XWLPT coming from CM9 the phone block in the boot ,i see only the S and samsung galaxy SII!!
i did some thing wrong?
Wipe data.
przemcio510 said:
Wipe data.
Click to expand...
Click to collapse
dont work
Oh, then it seems to be more complicated. Have you tried to flash 4.0.3?
What process did you use to flash LPT?
Sent from my GT-I9100 using xda premium
m7amed said:
after flashing I9100XWLPT coming from CM9 the phone block in the boot ,i see only the S and samsung galaxy SII!!
i did some thing wrong?
Click to expand...
Click to collapse
Do a full wipe!!!
przemcio510 said:
Oh, then it seems to be more complicated. Have you tried to flash 4.0.3?
Click to expand...
Click to collapse
no i didn't tried it.
HANDSY said:
What process did you use to flash LPT?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
download mode,PDA,start.
Gercke said:
Do a full wipe!!!
Click to expand...
Click to collapse
i did it.
now i flashed siyah 4 and i installed CM9 from CWM and all ok now
but i want to use this rom i will try to flash it again
is it safe?
Yes LPT is safe I'm on a modified version of it right now. It's not the ROM but the kernal that is the problem with certain 4.0.4 leaked ROMs. If you use siyah as your kernel you will be safe.
Sent from my GT-I9100 using xda premium
Related
i followed the instructions on removing the yellow trangle on boot up, forgetting i had recently flashed miui. So yes i made the dumb decision of flashing the stock kernal through mobile odin on miui. any fix? i already tried flashing stock through odin... yes it will enter recovery and download mode.
When you say recovery do you mean stock recovery or cwm? You should be able to just flash miui again in recovery. Or you can just Odin(or flash in recovery) the siyah kernel and you should be good to go
Sent from my Samsung Galaxy S II
Can you get back to MIUI? If so then just flash a new kernel in Mobile Odin.
Or go into download and use Odin on the PC and do it from there
Sent from my SGH-I777 using XDA App
Nick281051 said:
Or go into download and use Odin on the PC and do it from there
Sent from my SGH-I777 using XDA App
Click to expand...
Click to collapse
i meant stock reoveryy... and i did try the odin method but as soon as i try to flash the i777 stock it says it failed im using odin 1.83 btw
Smacdallas said:
i meant stock reoveryy... and i did try the odin method but as soon as i try to flash the i777 stock it says it failed im using odin 1.83 btw
Click to expand...
Click to collapse
Ok, I put a warning that would happen after you remove the triangle...
Can you get into MIUI?
Try flashing siyah.tar in odin.
Sent from my SGH-I777 using xda premium
skatin707 said:
Try flashing siyah.tar in odin.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
i had already tried this but decided to try it again because of your post! and it worked haha! thanks dude
Smacdallas said:
i had already tried this but decided to try it again because of your post! and it worked haha! thanks dude
Click to expand...
Click to collapse
Glad it worked
I had the same issue.
Sent from my SGH-I777 using xda premium
I am trying to root my recently updated Bell mobility samsung galaxy S2 I9100 running ICS 4.0.3, Baseband version I9100MUGLD3, Kernel Version 3.0.15-I9100MUGLD3-CL377577, Build Version IML74K.UGLD3. I Can't Find anything on these threads. Can someone help? Thanks in advance.
Ethanp said:
I am trying to root my recently updated Bell mobility samsung galaxy S2 I9100 running ICS 4.0.3, Baseband version I9100MUGLD3, Kernel Version 3.0.15-I9100MUGLD3-CL377577, Build Version IML74K.UGLD3. I Can't Find anything on these threads. Can someone help? Thanks in advance.
Click to expand...
Click to collapse
check the link below
Universal Rooting Method for ICS
Sun90 said:
check the link below
Universal Rooting Method for ICS
Click to expand...
Click to collapse
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Ethanp said:
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Click to expand...
Click to collapse
You're device is fine. I have the same thing and I've flashed hundreds of times. You just have to know what you're flashing and understand the basics
Sent from my GT-I9100 using xda premium
kilometers4 said:
You're device is fine. I have the same thing and I've flashed hundreds of times. You just have to know what you're flashing and understand the basics
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I am familiar with flashing. I had the LG Optimus LTE before this and flashed quite a few roms, This phone however has me awfully confused. I have been researching all day. And so far i am under the understanding that the touch cwm are not good and the use the 4.0.1.5 recovery. But what i don't understand is how do you install roms without wiping data/factory reset through cwm? don't most roms require this? and isn't that what causes the superbrick? Sorry for sounding like a noob. but can you tell me how you do your flashing?
Ethanp said:
I am familiar with flashing. I had the LG Optimus LTE before this and flashed quite a few roms, This phone however has me awfully confused. I have been researching all day. And so far i am under the understanding that the touch cwm are not good and the use the 4.0.1.5 recovery. But what i don't understand is how do you install roms without wiping data/factory reset through cwm? don't most roms require this? and isn't that what causes the superbrick? Sorry for sounding like a noob. but can you tell me how you do your flashing?
Click to expand...
Click to collapse
Just use a different kernel, like siyah (www.gokhanmoral.com and make it's for the s2 not s3). Then you can wipe data. Just didn't not be on 4.0.4, and have a samsung based kernel (the kernel dev should have info in the op). Once you're on a safe kernel you can flash whatever you want and wipe data.
Sent from my GT-I9100 using xda premium
kilometers4 said:
Just use a different kernel, like siyah (www.gokhanmoral.com and make it's for the s2 not s3). Then you can wipe data. Just didn't not be on 4.0.4, and have a samsung based kernel (the kernel dev should have info in the op). Once you're on a safe kernel you can flash whatever you want and wipe data.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ok so i flash the kernel via odin? because my phone doesn't have cmw installed. Siyah-s2-v4.0.1.tar that is the kernel i am about to flash. Is it safe for my phone? also do i need to do a backup of my stock kernel?
Ethanp said:
Ok so i flash the kernel via odin? because my phone doesn't have cmw installed. Siyah-s2-v4.0.1.tar that is the kernel i am about to flash. Is it safe for my phone? also do i need to do a backup of my stock kernel?
Click to expand...
Click to collapse
Yeah, you should be able to flash through Odin. And you can flash back to stock by getting a stock firmware from www.sammobile.com and flash through Odin
Sent from my GT-I9100 using xda premium
Ethanp said:
Awesome the link worked great. But it turns out my phone tested positive to the Emmc brick. So i now i don't want to flash anything lol.
Click to expand...
Click to collapse
How do you test for Emmc brick?
Sent from my iPad using Tapatalk HD
Spacemonkie4207 said:
How do you test for Emmc brick?
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Go to this page, http://forum.xda-developers.com/showthread.php?t=1693704 and download and install the gotbrickbug apk
kilometers4 said:
Yeah, you should be able to flash through Odin. And you can flash back to stock by getting a stock firmware from www.sammobile.com and flash through Odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
So I did what you told me too. And went ahead and flashed a custom kernel (Siyah 4.0.1) and tried installing salman ics rom. and now i have a never ending boot loop.. any suggestions?
Ethanp said:
So I did what you told me too. And went ahead and flashed a custom kernel (Siyah 4.0.1) and tried installing salman ics rom. and now i have a never ending boot loop.. any suggestions?
Click to expand...
Click to collapse
Did you wipe data when you installed it? It's usually highly recommended
Sent from my GT-I9100 using xda premium
kilometers4 said:
Did you wipe data when you installed it? It's usually highly recommended
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes I wiped data, cache and dalvik cache. Couldn't get into recovery so i just re-flashed my firmware via odin. All is good now and successfully flashed cm9 with no issues. Must have been a bug in the rom.
I have Revolution HD ROM instaled on my GT-I9300, saw the stock ROM I9300XXELK4, and i want to try it out, but, can i flash with odin over the custon rom? or i have to do something before?
Thanks
JhunH said:
I have Revolution HD ROM instaled on my GT-I9300, saw the stock ROM I9300XXELK4, and i want to try it out, but, can i flash with odin over the custon rom? or i have to do something before?
Thanks
Click to expand...
Click to collapse
do a factory reset to be safe. if you want to be even safer flash mega wipe from one of the threats, but usually factory reset should be enough.
the factory reset on setings?
JhunH said:
the factory reset on setings?
Click to expand...
Click to collapse
yes, or the one in CWM
Thanks, im gonna try, and post after
chrismast said:
yes, or the one in CWM
Click to expand...
Click to collapse
chrismast it worked, many thanks
JhunH said:
chrismast it worked, many thanks
Click to expand...
Click to collapse
You are welcome
Sent from my GT-I9300 using xda app-developers app
Hi!
I tried to install a custom rom on Samsung galaxy s2 and I do wipe data/factory reset and now galaxy s2 won't turn on,recovery mode or download mode.Please help me.
But sometimes the phone is warm on top where is the front camera.
What means that?
Lol. Which ROM did you try?
Brickbug?
Sent from my GT-I9100 using xda app-developers app
drspikes said:
Lol. Which ROM did you try?
Brickbug?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
This is [ROM][4.1.2][AOKP/CM/PA] GT-I9100/I9100P Vanilla RootBox [12/11][v3.2][Nightlies]
gogupaul said:
This is [ROM][4.1.2][AOKP/CM/PA] GT-I9100/I9100P Vanilla RootBox [12/11][v3.2][Nightlies]
Click to expand...
Click to collapse
Please confirm that your model number is GT I9100 OR GT I9100G?
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Please confirm that your model number is GT I9100 OR GT I9100G?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
is GT I9100 and I try to put in recovery or download mode but doesn't work.(crying:
gogupaul said:
is GT I9100 and I try to put in recovery or download mode but doesn't work.(crying:
Click to expand...
Click to collapse
before installing that custom rom, which rom u ver using, any info on that, like was it stock ICS v4.0.4 or v4.0.3 also was ur phone rooted before of installing the custom ROm
Sun90 said:
before installing that custom rom, which rom u ver using, any info on that, like was it stock ICS v4.0.4 or v4.0.3 also was ur phone rooted before of installing the custom ROm
Click to expand...
Click to collapse
4.0.3 and the phone wasn't rooted before
it died so sorry... go to the nearst samsong branch
gogupaul said:
Hi!
I tried to install a custom rom on Samsung galaxy s2 and I do wipe data/factory reset and now galaxy s2 wo't turn on,recovery mode or download mode.Please help me.
Click to expand...
Click to collapse
ffs, here we go again.
Do not put stupid topic titles like "HELP". Titles are supposed to be descriptive, use common sense.
Use browse and search functions before creating topics. There just isn't any excuse or justification for you creating this topic.
eng_ibrahim said:
it died so sorry... go to the nearst samsong branch
Click to expand...
Click to collapse
but she work with usb jig?
gogupaul said:
but she work with usb jig?
Click to expand...
Click to collapse
If she does flash a stock firmware
Sent from my potato running a potato.
i have tried to install almost every available XXLSJ based ROM on my I9100 but every ROM stuck on its start up with Samsung logo.i wiped and had clean installation.
Any suggestion??????I really want to have this base on my S2
aliishere said:
i have tried to install almost every available XXLSJ based ROM on my I9100 but every ROM stuck on its start up with Samsung logo.i wiped and had clean installation.
Any suggestion??????I really want to have this base on my S2
Click to expand...
Click to collapse
try wiping data & Dalvik cache too....
ctg60000 said:
try wiping data & Dalvik cache too....
Click to expand...
Click to collapse
yah......:crying:
aliishere said:
yah......:crying:
Click to expand...
Click to collapse
try flashing stock ics thru odin, root it & then try installing custom ROM...
it has always worked for me...!
Are you sure you have the GT-I9100 and not the GT-I9100G variant? Check in settings > about.
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Are you sure you have the GT-I9100 and not the GT-I9100G variant? Check in settings > about.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Lol... He can't start his cell hw he can go in setting...
Remove battery and see back side... Model name
Sent from my GT-I9100 using xda premium
its SHW-M250S
aliishere said:
its SHW-M250S
Click to expand...
Click to collapse
Ouch... it's only for GT-I9100 mate
Sent from my GT-I9100 using xda premium
transform it into a 9100 http://forum.xda-developers.com/showthread.php?t=1595225
http://forum.xda-developers.com/showthread.php?t=1097347 Korean version owner thread.