Installation of custom rom Xperia S ics on X10i - XPERIA X10 Q&A, Help & Troubleshooting

Hi, can someone help me on installation of this ROM step by step? I'm having trouble understanding the installation guide. Do I also need to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1782771
I'm using rooted x10i with unlocked BL. I also using the original stock ROM 2.3.3 Gingerbread. If this question sounds stupid, please forgive me. I'm new to this. Trying to learn. Your respond is much appreciated :laugh::good:

SuPha-L33T-K1LLa said:
Hi, can someone help me on installation of this ROM step by step? I'm having trouble understanding the installation guide. Do I also need to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1782771
I'm using rooted x10i with unlocked BL. I also using the original stock ROM 2.3.3 Gingerbread. If this question sounds stupid, please forgive me. I'm new to this. Trying to learn. Your respond is much appreciated :laugh::good:
Click to expand...
Click to collapse
Before any step... what ROM you want to install ? Do you have CWM installed ? Also are you sure you have unlocked bootloader ?
Sent from my Transformer TF101 using xda app-developers app

SuPha-L33T-K1LLa said:
Hi, can someone help me on installation of this ROM step by step? I'm having trouble understanding the installation guide. Do I also need to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1782771
I'm using rooted x10i with unlocked BL. I also using the original stock ROM 2.3.3 Gingerbread. If this question sounds stupid, please forgive me. I'm new to this. Trying to learn. Your respond is much appreciated :laugh::good:
Click to expand...
Click to collapse
So you want to flash Vasishta Reddy's CM9 ROM, ok so you are already on UL bootloader and rooted too, and I guess you are already on .71 baseband? now just follow below steps,
flash latest FXP kernel using flashtool, it will also install cwm recovery to your phone. once done flash ROM, launcher, gapps and addons.
Here is more detailed guide, but make sure you choose latest fxp kernel.

The xperia S ics ROM. Its on the link I gave. Both I've already installed it using flashtool. I can now reboot it into recovery mode. And I have checked using S1tool and there is the small letter 'r' in "S1 ERROM VER" code part. Am I correct?

jeetu1981 said:
So you want to flash Vasishta Reddy's CM9 ROM, ok so you are already on UL bootloader and rooted too, and I guess you are already on .71 baseband? now just follow below steps,
flash latest FXP kernel using flashtool, it will also install cwm recovery to your phone. once done flash ROM, launcher, gapps and addons.
Here is more detailed guide, but make sure you choose latest fxp kernel.
Click to expand...
Click to collapse
Yes it is .71 baseband. Thanks. I'll try my best

SuPha-L33T-K1LLa said:
Yes it is .71 baseband. Thanks. I'll try my best
Click to expand...
Click to collapse
Good luck , let us know the results!
Here is some more useful info for you- http://forum.xda-developers.com/showthread.php?t=1410219&page=126

Small r means unlocked bl
Sent from my Xperia X10 using xda premium

why i cant work at all ? i flash the lastest kernal FXP 132 , after flash in follow the instructions, but cant work..T.T

What message are you getting when you go to recovery in FDP 132? If its error 7 then bypassing that message is very easy.. look at the comment section of the ROM...
Sent from my Transformer TF101 using xda app-developers app

Hi!
My question is even worse. Is there a fully newbie tutorial for installing that ICS on X10?? I'm new in all that but I started reading and watching tutorials and I'm getting more and more confused after every tutorial.
I get this part: http://forum.xda-developers.com/showthread.php?p=10879507#post10879507 (great tutorial, just what I need) but after that I'm confused... It says 1)FLASH THE LATEST CM9 FXP KERNEL and there I'm confused. Where to find it and how to flash it? The same as SE Firmware in above tutorial, using Flashtool?
2)MAKE A FULL WIPE
3)FLASH THE ROM
This thing I understand. I flash the ROM just like kernel before.
4)FLASH XPERIA HOME ,GAPPS AND REBOOT ,LET THE ROM SETTLE AGAIN REBOOT TO RECOVERY
5) FINALLY FLASH ADDON PACK
So this flash is a thing that confuses me.
Thank you and sorry for such a newbie questions.

Well the kernel you must flash using the flashtool. You can get the kernel here http://forum.xda-developers.com/showthread.php?p=29001053. The rom, home, gapps and addon you must flash it using CWM via install .zip files. The guide is actually simple if you once understand
Sent from my Xperia X10 using xda premium

SuPha-L33T-K1LLa said:
Well the kernel you must flash using the flashtool. You can get the kernel here http://forum.xda-developers.com/showthread.php?p=29001053. The rom, home, gapps and addon you must flash it using CWM via install .zip files. The guide is actually simple if you once understand
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
Thanks! Since FXP135's download link is broken, I will use Amin Cm9-P6005 as Kernel. Just one question: from the tutorial about flashing, there is only one SE Firmware 3.0.1 UK version, but somewhere I found it more. Is it important or not? I'm from Croatia (Europe) so will there be some problems?
EDIT: nvm, root and installing xrecovery was successful I just installed audio stuttering fix for now, and I will flash kernel and ICS when I get my backup phone. Thanks once again

Now I see that there is "video recording" and also "8mpx" under BUGS. What does it mean!?? I use camera almost every day so video recording and taking pictures with 8 Mpx is must-have. I use Vignette to take pictures and stock SE's app for recording video.
And I saw in Amin's kernel that wi-fi sometimes doesn't work. Wi-fi and tethering (hotspot) are also a must-have options. Please confirm that these bugs are still active because I will give up from this ROM if it's right.
If not, I will flash it today, or these days. And I saw something about baseband but I don't understand. I rooted the phone and installed CWM and now can I just flash Amin's kernel, do a full wipe and then install home, gapps and addon?

xplod2841 said:
Now I see that there is "video recording" and also "8mpx" under BUGS. What does it mean!?? I use camera almost every day so video recording and taking pictures with 8 Mpx is must-have. I use Vignette to take pictures and stock SE's app for recording video.
And I saw in Amin's kernel that wi-fi sometimes doesn't work. Wi-fi and tethering (hotspot) are also a must-have options. Please confirm that these bugs are still active because I will give up from this ROM if it's right.
If not, I will flash it today, or these days. And I saw something about baseband but I don't understand. I rooted the phone and installed CWM and now can I just flash Amin's kernel, do a full wipe and then install home, gapps and addon?
Click to expand...
Click to collapse
In ics 8mp camera,video recordind,h/W decoding player and hotspot is not working yet..
You have wait
U should continue with GB if u want fully working rom
Sent from my Xperia X10 using xda premium

Oh :/ I just can't understand why so many people put ICS when it's not over yet.
Sent from my X10i using Tapatalk 2

please help me.. im stuck at boot animation in the ROM.. im done flashing the kernel, did wipe, flash ROM, flash home and gapps now booting..and im stuck at boot animation.. please help..

ics 04
wifi disconnects himself, the camera autofocus not working, otherwise is good.
---------- Post added at 06:20 PM ---------- Previous post was at 06:16 PM ----------
Gooperz06 said:
please help me.. im stuck at boot animation in the ROM.. im done flashing the kernel, did wipe, flash ROM, flash home and gapps now booting..and im stuck at boot animation.. please help..
Click to expand...
Click to collapse
hy, same problem I haved to,make full wipe, instal ics 02, then boot oance, restart in recovery and flash the rom 04 and the rest( launcher, gaps add-ons) without wipe. at me worked.
Best regards
---------- Post added at 06:30 PM ---------- Previous post was at 06:20 PM ----------
where i cand download the latest cm9 kernel(140), the .ftf file.
Best regards

Is there any fully operational mod? ICS or GB? MIUI? What about this:
http://forum.xda-developers.com/showthread.php?t=1774623 or this http://forum.xda-developers.com/showthread.php?t=1540716
I just need a fully operational mod, with aditional things and different look, with all bugs from stock GB fixed, as much smooth and fast as possible. Do I ask too much ? Those two MIUI both look great, with some additional things like xloud, bravia engine, beats audio etc. But is any of them fully operational (including camera, usb tethering/hot spot and wi-fi)?
Thank you a lot!

ics004
hy can anyone help me with these problems? wifi disconnects himself, the camera autofocus not working, or can give me a link with latest fxp kernel .ftf? thx
Best regards
---------- Post added at 01:05 PM ---------- Previous post was at 01:00 PM ----------
xplod2841 said:
Is there any fully operational mod? ICS or GB? MIUI? What about this:
http://forum.xda-developers.com/showthread.php?t=1774623 or this http://forum.xda-developers.com/showthread.php?t=1540716
I just need a fully operational mod, with aditional things and different look, with all bugs from stock GB fixed, as much smooth and fast as possible. Do I ask too much ? Those two MIUI both look great, with some additional things like xloud, bravia engine, beats audio etc. But is any of them fully operational (including camera, usb tethering/hot spot and wi-fi)?
Thank you a lot!
Click to expand...
Click to collapse
mate i don't know, i tested this http://forum.xda-developers.com/showthread.php?t=1516960 and works great,smooth and fast,camera works, have xloud, bravia engine.usb tethering/hot spot i don't tryed but I believe it works.I don't tested any MIUI.
best regard

anyone know how to fix my problem in booting problem... im stuck always in the XPERIA boot...it just goes on and on.. please help

Related

[Q] Unlocked bootloader wi-fi error

I'm currently running stock 2.3.3 from SE (through Rogers in Canada) with baseband 2.1.71 (rooted since it was released)
I planned on installing CM7 on my phone so I decided to unlock my bootloader so that it is ready when I eventually do so. I used FlashTool 0.6.7.0 to unlock it and it ran without any problems.
However I'm unable to turn Wi-Fi on. It only says "Error" and I'm not too sure what's wrong. I tried searching for answers but others with same issues were using custom ROMs while I'm still on stock.
Anyone know what I can do to fix this? If you're missing any information to be able to help me, please let me know and I will post them. (I have about a week to fix this as I'll be leaving on vacation and I'll need wifi working)
Thanks!
If you have really opened bootloader, for such device special kernels are necessary (stock or custom). Flash by FlashTool one of such ftf-kernels, then install with utility xRecovery the module wi-fi for this kernel.
The author of each ROM recommends, what kernels to use and gives the link on downloading.
just look for the kernel tht is meant for unlocked bootloader tht should work with stock rom n then flash kernel via flashtool n wifi modules file through xrecovery ur wifi will work
Which kernel u using? U prob need the relevant WiFi modules.
Sent from my X10i using XDA App
Thanks, I'll give it a shot tonight. I noticed it mentioned to install a custom kernel but seeing how everything else was fine I skipped that step. (ooops )
I had that "error" on my stock with zKernel.I dont know cause,but i fix it with reinstall zKernel..Try with zKernel for stock..
Sent from my xperia "z10i"
Well, installed FXP105 and everything seems to be buttery smooth. Wifi is working now (yay!), but now camera is not working. Also tried with Vignette and no go.
Gonna search around a bit.
Thats ICS man,camera dont working and some other stuff eather.Its stable but its not for everyday use.
Sent from my xperia "z10i"
It's not ICS... I installed CM7.2. Found out FXP105 was missing a lib file for camera so I'll fix it later.
Thanks for all your help guys
FXP105 is 9.0 (ICS),thats FXP54 i think.
Sent from my xperia "z10i"
Hi. I haven't tested it with CM7 but MIUI had the same problem, so try to flash wifi fix and then UnlockedBL.zip . And also try other kernels
neoxx3m said:
FXP105 is 9.0 (ICS),thats FXP54 i think.
Sent from my xperia "z10i"
Click to expand...
Click to collapse
There's a FXP105 CM9.0 and an FXP105 7.2
http://forum.xda-developers.com/showthread.php?t=911364
Got my camera fixed!
The cm9 version is ics build. It is alpha state also cm 7 is gb and is a lot more stable
Sent from my X10i using XDA App
Yep,my bad.
Sent from my xperia "z10i"

[Q] problem in entering Xrecovery mode in my xperia X10 rooted phone

guys right now am in really awkward situation..
my xrecovery working really fine untill i installed wolfxperia uibidoom rom (full wipe+dalvik cache)with ICs theme (ICS-ThemeV1.1),now m stucked xperia boot screen and cannot entered in xrecovery mode
guys please help in that case
btw is there any alternate method to install xrecovery without flashtool (coz i want to reinstall xrecovery in my x10 may be this will work)
one more question
can we install custom roms like wolfxperia's rom & cyno roms in x10 by using flashtool??
ulbldoom was not for locked bootloaders...you got wrong version my friend
Sent from my X10S using xda premium
Yes it appears ur bootloader is locked that is for unlocked bl so wont work. U can install xrec manually but it much easier to use flashtool. Use seus or flash global generic 2.3.3 then root and install xrec
Sent from my X10 using XDA
Try This
Restore your phone via SEUS, then do a complete Root, Bootloader unlock via Flashtool,
Unlocking bootloader will help you a lot, for many custom ROM's you'll require an unlocked bootloader so do that using the flashtool aswell.
Install xRecovery via flashtool (easiest way there is), you can install it manually but it tends to be a bit of a headache !!
thankss guys
fothanks champ,laneyofdeath & dhoje
my phone is now in working mode again XD
well rite now m running Thgo v16 rom....nice rom
can anyone suggest me some cool n smooth rom for my X10
... for locked bootloader offcourse XD
Detested said:
fothanks champ,laneyofdeath & dhoje
my phone is now in working mode again XD
well rite now m running Thgo v16 rom....nice rom
can anyone suggest me some cool n smooth rom for my X10
... for locked bootloader offcourse XD
Click to expand...
Click to collapse
Do you mind hitting the thanks button for championswimmer and laneyofdeath???
Do it!
Sent from my X10 using xda premium
my mistake
thanks you guys...n thank u milton.....
n plz suggest me sm really good rom for X10 locked bootloader
Detested said:
my mistake
thanks you guys...n thank u milton.....
n plz suggest me sm really good rom for X10 locked bootloader
Click to expand...
Click to collapse
Presently smooth going roms are feralab and championswimmer's rom.
Sent from my X10 using xda premium
same issue
Ive had the same issue only a few days ago where i was afraid i nearly screwed up my phone. I kept ready the forums here tho, and came to the conclusion that
a I used an "outdated" flashtool, and
b I used the wrong kernel file before i flashed... and
c (yes this was beyond stupid) i forgot to put the zip file onto the sd card... so when i was going to flash i didnt have anything to flash.
after that my baby kept still at the SonyEriccson screen.
I got the latest flashtool, flashed the Generic 2.3.3 and restarted from scratch.
I now have the Darkedition 1.5 installed. It looks really nice, but its just not my rom, so i will keep looking for a new rom. I'd like a smooth and sleak rom. just to keep it fast and furious.
i still love my phone, even after having it for over a year... something that's never happened to me before.
---------- Post added at 08:45 PM ---------- Previous post was at 08:35 PM ----------
I downloaded the feralab 11 rom and will try and figure out how to get that installed properly without have to spend a few more days in a rom trying to fix my phone.
if anyone has any other suggestions for a clean and fast rom, i'm all ears.
Try feralab. Its pretty good
Sent from my X10 using XDA
Ok, checking out Feralab v11.2 gaming edition rom. so far installation runs without problems... installed with unlocked bootloader Kernel from DooMKernel v6.
I hope it will run smooth. I'll keep you posted.
---------------
Rom istalled without a hitch. ran the script afterwards, and so far it runs smoother than i have ever seen this phone run!
Market isnt working yet, but that may require a few reboots and otherwise i'll get that fixed in another way.
Since i can post in the FeraVolt's thread, i'll just say THANK YOU over here. freaking nice work dude!
Google Play/Market not working
Did a complete reinstall, even preformatted the SD card, since it was full of crap anyway. did the install the way FeraVolt suggested. everything works fine, just not the market. anyone have a similar problem or sollution?
I tried to download the apk externally, didnt make a difference. I didnt see any other google apps? might the problem lie in a missing google framework? or missing other google apps? I havent had much time to spend reading into the issue, but hopefully tonight i can find out some more. meanwhile... any help is appreciated.
ATH
well i used Thgo v16 rom n cynogen rom in my xperia
but according to me champion swimmer is far better & smoother
Athalon said:
Did a complete reinstall, even preformatted the SD card, since it was full of crap anyway. did the install the way FeraVolt suggested. everything works fine, just not the market. anyone have a similar problem or sollution?
I tried to download the apk externally, didnt make a difference. I didnt see any other google apps? might the problem lie in a missing google framework? or missing other google apps? I havent had much time to spend reading into the issue, but hopefully tonight i can find out some more. meanwhile... any help is appreciated.
ATH
Click to expand...
Click to collapse
you have google services framework app?
Sent from my X10S using xda premium
Sorry fot the late respons champ. Not sure if i did have the framework, but after installing Fera's market fix, i took a boot and a half to work properly. Thanks for the help tho.
Thanks also to Jeffrey for trying to help fix it.
I am a happy camper now!
sent from my X10 running feralab's 11.2 gaming rom, DooMKerneL v6.

KA6 Ice Cream Sony Boot Loop

Hi
I have tried all day to install ICS on my Neo V, and I always end up in a boot loop (after the XPERIA logo it restarts). I have tried KA06 ICS and another Sony based ICS ROM.
I'm pretty new to this and I'm not sure what info you need so please ask away.
One thing I noticed is that whenever I clear the dalvic-cache it gives an error (not mounted or something i think?)
Thanks
flangefrog said:
Hi
I have tried all day to install ICS on my Neo V, and I always end up in a boot loop (after the XPERIA logo it restarts). I have tried KA06 ICS and another Sony based ICS ROM.
I'm pretty new to this and I'm not sure what info you need so please ask away.
One thing I noticed is that whenever I clear the dalvic-cache it gives an error (not mounted or something i think?)
Thanks
Click to expand...
Click to collapse
Did you succesfully unlocked your bootloader and installed a custom kernel?
Thats what i did to install k6 on my neo v.
1º Flash .64 baseband.
2º Flash .62 baseband with flashtools(check exclude baseband).
3º Flash kernel.
4º Recovery wipe all + install k6.
5º Flash neo-v patch.
if i install .64 baseband im stuck on xperia boot image loops.
equlog said:
Thats what i did to install k6 on my neo v.
1º Flash .64 baseband.
2º Flash .62 baseband with flashtools(check exclude baseband).
3º Flash kernel.
4º Recovery wipe all + install k6.
5º Flash neo-v patch.
if i install .64 baseband im stuck on xperia boot image loops.
Click to expand...
Click to collapse
Do you try boot once then install Neo v patch?
Find me at Gtalk
Gmail: PM
Using XDA on my Neo V
Sorry for my bad English...
@krabappel2548 It came unlocked and with a custom 2.3 rom when I bought it. I can install a stock 2.3 rom using flashtool fine.
@equlog Yes this time I didn't flash the 64 baseband from the KA thread and just left the stock one on. (I had .62 stock)
@wilsonchuchu I tried that but it didn't help
EDIT: Somehow it works now! I flashed the stock rom again and have been using it for a while (I rebooted a couple of times), then I flashed the non-oc kernel and this time I was able to clear the dalvic-cache. The rest worked fine and I've just booted in to the phone. I'm not sure why it worked this time because I've been doing this all day.
Now for KA7 lol
Thanks for your help
wilsonchuchu said:
Do you try boot once then install Neo v patch?
Click to expand...
Click to collapse
Yes, i can boot without install neo-v patch without any problem.
flangefrog said:
@krabappel2548 It came unlocked and with a custom 2.3 rom when I bought it. I can install a stock 2.3 rom using flashtool fine.
@equlog Yes this time I didn't flash the 64 baseband from the KA thread and just left the stock one on. (I had .62 stock)
@wilsonchuchu I tried that but it didn't help
EDIT: Somehow it works now! I flashed the stock rom again and have been using it for a while (I rebooted a couple of times), then I flashed the non-oc kernel and this time I was able to clear the dalvic-cache. The rest worked fine and I've just booted in to the phone. I'm not sure why it worked this time because I've been doing this all day.
Now for KA7 lol
Thanks for your help
Click to expand...
Click to collapse
You can install KA07 without wiping everything
krabappel2548 said:
You can install KA07 without wiping everything
Click to expand...
Click to collapse
K7 already going to flash right now.
since i cant post int dev forums.. thanks krabappel! great work!.
equlog said:
K7 already going to flash right now.
since i cant post int dev forums.. thanks krabappel! great work!.
Click to expand...
Click to collapse
You're welcome I also updated Neo V patch
KA06 looks really good, just one problem so far (if you can call it that) the cosmic flow live wallpaper crashes every time I try to add it. The other live wallpapers work. Is this because the hardware acceleration isn't fully implemented yet?
Downloading KA07 now
flangefrog said:
KA06 looks really good, just one problem so far (if you can call it that) the cosmic flow live wallpaper crashes every time I try to add it. The other live wallpapers work. Is this because the hardware acceleration isn't fully implemented yet?
Downloading KA07 now
Click to expand...
Click to collapse
Yes, that could be the reason.. Think I'll remove the Cosmic flow wallpapper in next versions
@krabappel
Will u made a mod when sony release official ics? i hope ^^
I've just been reading some more about the fw/basebands and it looks like the .62 firmware does include the .64 baseband. Looking in about phone seems to confirm that. Am I right?
.62 f/w has .64 baseband
Thanks, so for anybody else having problems with the Neo V it seems the best way would be:
1: Flash .62 firmware
2: Flash KA kernel.
3: Boot into recovery, wipe all + install KA.
4: Flash neo-v patch.
Here is the stock firmware .62 as an update.zip (for installing with ClockWorkMod): http://forum.xda-developers.com/show....php?t=1518148
These are for flashtools: http://forum.xda-developers.com/show....php?t=1445974 (I used this one), http://forum.xda-developers.com/show....php?t=1492145
equlog said:
@krabappel
Will u made a mod when sony release official ics? i hope ^^
Click to expand...
Click to collapse
Yes, I will make a mod when official ICS comes
@krabappel2548
I think I may have found the battery life problem. Looking at the battery usage under settings, the gallery app shows by far the most battery usage. When I go to apps and find gallery I see it's running a service called picassa sync. Disabling picassa sync on all the Google accounts and then force closing the gallery app seems to fix the battery usage. Can some other people please try it and confirm if it works?
After doing this the cpu time and amount of the battery used by the gallery app does not get any higher, even if I make sure the gallery is running again and it moves down the list and the highest battery usage becomes the screen.
Sent from my MT11i using xda premium
happened to me just now in KA12 ICS after I tried to remove the onscreen buttons
off topic
and about the widgets.. did anyone seems to have a problem with it? I have this battery widget after putting it up in homescreen, it doesn't move at all though the battery is decreasing, the widget stays the same. Same with player pro widget, you can press the next button fine but the music title and the album thumbnail stays.

[Q] Quick question regarding updating.

Dear reader,
I've currently been using Cyanomod for 2.3.7 Gingerbread.
My phone is rooted and everything (which took a little while )
Everything is running perfectly fine, but i would like to update my phone to android 4.0+ (whatever the lastest compatible version might be)
How should i go about this?
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
TJ007 said:
I believe the answer us first to backup your apps with titanium backup if you need them. Then go to recovery and backup your current Rom. (always be sure to do this). from recovery wipe factory reset and dalvik cache. Then install your new Rom from zip.
You cannot install an android 4.0 + over another version. Always backup and wipe.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Do i need to re-root my phone when i install a new Rom? Or should i just install it through recovery?
Rom's are pre rooted (expect stock, stock BASED roms ARE pre-rooted), once you've installed the rom through cwm, it will be rooted and ready.
cashtecz said:
Dear reader,
Do i basically uninstall everything and start from scratch or is there an easy method to quickly update my phone to android 4.
Kind Regards and Thank you for your time!
Click to expand...
Click to collapse
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
mikii100297 said:
If your bootloader is unlocked, you can easily flash a custom kernel (Based on ics, so it'll be compatible with ics rom) And boot into recovery, and flash a custom rom based on ics.
Click to expand...
Click to collapse
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
nh1402 said:
If your finding trouble with compatible roms are you saying your getting bootloops when trying them?, because a different Android Version requires a different kernel, So if you haven't or forget to flash the kernel recommended or provided then that would possibly be where your compatibility issues lye as you will get bootloops if you don't and you are changing version. As Mikii suggested earlier.
Click to expand...
Click to collapse
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
sarangkunte05 said:
Since you're using CyanogenMod 7 I would recommend you to use CyanogenMod 9.1 i.e. FXP 138 is the best in my experience.
Sent from my ST18i using xda app-developers app
Click to expand...
Click to collapse
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
cashtecz said:
Ahhh that must be it then.. I've been using the same kernel for quite some time now because it was quite a hassle to flash it. Different roms come with different kernels (at times). I'll have to figure out how to flash kernels again. Gonna check around the forums to see if i can find a suitable thread.
Thanks so much
Click to expand...
Click to collapse
The fastest way to flash a kernel is to use the program called flashtool, click on the lightening bolt, select Fastboot mode, then select kernel to flash find the kernel you want to flash and it should be done within literally 2 seconds. once Flashtool gives you the all clear, disconnect your phone from usb, restart phone, and there you go, the old kernel will be overwritten, and so will that kernel's cwm version, with the one from the new kernel.
Try FXP138
cashtecz said:
One last question, since i'm having trouble finding compatible roms.
Which one would any of you, recommend for me to use ?
I have a ST18i and i'd like the lastest compatible rom.
Thanks so much for the fast reponses and ofcourse the help.
Kind Regards,
Click to expand...
Click to collapse
i would also suggest you to try FXP138 which is CM9.1 Android 4.0.4, Its pretty smooth and the brightness bug seems to be resolved:laugh: in FXP138 here's the link http://forum.xda-developers.com/showthread.php?t=1409053
Also here is a link for ROM comparison - http://forum.xda-developers.com/showthread.php?t=1843741
Hope this helps!
FXP138-cm-9-20120916-UNOFFICIAL-urushi
cashtecz said:
When i look up Cyano 9.1 FXP 138, i get a list of downloads. FXP138-cm-9-20120916-UNOFFICIAL-haida.zip , FXP138-cm-9-20120916-UNOFFICIAL-mango.zip
What exactly are they and which one should i go for?
Click to expand...
Click to collapse
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
ramakrishnanjk said:
1. http://ul.to/f/zwx5le
2. choose and download FXP138-cm-9-20120916-UNOFFICIAL-urushi.zip
3. Flash the kernal inside above archive.(using fastboot mode.)
4. Enjoy.....:good:
Note:
urushi is the modder for Xperia ray(ST18i)
Click to expand...
Click to collapse
Nevermind, i figured it out!
cashtecz said:
Nevermind, i figured it out!
Click to expand...
Click to collapse
Hey,
Everything is installed and running, however i am wondering about just one thing.
Whenever i reboot my phone i get, right after imputting my sim code, a Unlock Network SIM message.
What is this and how can i solve it?
Regards,
(oops just realized i made a double post, apologies!)

[Q] WiFi on Xperia Mini ICS

Well, actually I'm using a custom rom, based on GB, because I've been having the same problem with EVERY ROM based on ICS (Stock or Custom).
I honestly don't know why does it happen, my problem is... Every time I've tried an ICS-based Rom, my WiFi disconnects itself all the time. It goes out and comes back after a few seconds every time it wants to, and it doesn't matter at all how far or near I am of my router.
I never had that problem with Gingerbread. Is it a problem with DNS, IP or something like that? Can I just use an app to fix that?
At least I would like to know what happens, thanks everybody in advance! :laugh:
Maximo22 said:
Well, actually I'm using a custom rom, based on GB, because I've been having the same problem with EVERY ROM based on ICS (Stock or Custom).
I honestly don't know why does it happen, my problem is... Every time I've tried an ICS-based Rom, my WiFi disconnects itself all the time. It goes out and comes back after a few seconds every time it wants to, and it doesn't matter at all how far or near I am of my router.
I never had that problem with Gingerbread. Is it a problem with DNS, IP or something like that? Can I just use an app to fix that?
At least I would like to know what happens, thanks everybody in advance! :laugh:
Click to expand...
Click to collapse
Try Changer your Baseband.
Maximo22 said:
Well, actually I'm using a custom rom, based on GB, because I've been having the same problem with EVERY ROM based on ICS (Stock or Custom).
I honestly don't know why does it happen, my problem is... Every time I've tried an ICS-based Rom, my WiFi disconnects itself all the time. It goes out and comes back after a few seconds every time it wants to, and it doesn't matter at all how far or near I am of my router.
I never had that problem with Gingerbread. Is it a problem with DNS, IP or something like that? Can I just use an app to fix that?
At least I would like to know what happens, thanks everybody in advance! :laugh:
Click to expand...
Click to collapse
Maybe change your wlan to b/g and not b/g/n, that had solved it for me
Had your bootloader unlocked? What kernel are you using?
Sent from my smultron using xda app-developers app
eltonpestana: Is it possible to change the baseband in this phone?
mihahn: My WiFi is already in b/g mode /:
gouthamthemostwanted: My bootloader doesn't allow unlocking, so I am using the stock Kernel -.-
If you are using the stock kernel are you sure you flash ics kernel prior flashing the ics Rom?
If you flash ics kernel.sin using flashtool and still experience problems on WiFi then go through the updater-script of the Rom and make sure permissions are set right and this symlink is present
symlink("/data/etc/wifi/wl1271-nvs.bin","/system/etc/firmware/ti-connectivity/wl1271-nvs.bin");
I use rage kernel and removing this symlink from updater-script made my WiFi not to work . I don't know whether will it work with stock ics kernel but it's worth a shot.
Sent from my smultron using xda app-developers app
Ok, I'll be honest with you. I don't know what the updater-script is, and I never tried to flash a kernel because my bootloader is still locked
I think the problem is on your router. Change the channel and mode and also disable the wireless security. See what happen......
Sent from my ST15i using xda premium
To flash the stock Sony kernel you don't need a unlocked bootloader . If you don't flash ics kernel for ics Rom I'm sure it won't work properly. I won't even boot properly in the first place.
Below is the stock ics firmware for st15i
http://www.mediafire.com/?wot47vumhstlc4h
Flash the above mentioned ics firmware using flashtool before flashing any ics Rom.
I hope you know what a flashtool is and how to flash your device using it.
Sent from my smultron using xda app-developers app
Flash back on gingerbread and see if wifi is working well. If yes, you know it's not related to your router.
It's a known problem on ics by sony that wifi isn't working well, but there's no working fix as far as I know...
Sent from my SK17i running Jelly Bean via CM10
gouthamthemostwanted said:
To flash the stock Sony kernel you don't need a unlocked bootloader . If you don't flash ics kernel for ics Rom I'm sure it won't work properly. I won't even boot properly in the first place.
Below is the stock ics firmware for st15i
http://www.mediafire.com/?wot47vumhstlc4h
Flash the above mentioned ics firmware using flashtool before flashing any ics Rom.
I hope you know what a flashtool is and how to flash your device using it.
Sent from my smultron using xda app-developers app
Click to expand...
Click to collapse
Yeah... I know what flashtool is, I have used it too many times. But I never heard about flashing the stock kernel, I thought the kernel was automatically updated when you install the ICS tft. I'll try it anyway.
mihahn said:
Flash back on gingerbread and see if wifi is working well. If yes, you know it's not related to your router.
It's a known problem on ics by sony that wifi isn't working well, but there's no working fix as far as I know...
Sent from my SK17i running Jelly Bean via CM10
Click to expand...
Click to collapse
Actually, as I said, in GB I never had that problem, and I don't know what to do yet.
Maybe this can help...
Here are the updater-script files of the ROM's that I have recently used.
If there's something incompatible with my phone or if there's something I can do with them to fix the problem, I'd be glad to know it
I'll let you know man . I'll go through them . It's 12 in the morning here
Sent from my smultron
Haha it's ok, take your time. Thank you
I just skimmed through both the updater-scripts and I don't find anything wrong there. What ftf file you used for ics? Is it regional customization or world customization?
Sent from my smultron
About the real ics r6 you may want to take a look at this post
http://forum.xda-developers.com/showthread.php?t=1914645
flash the above zip after flashing real ics r6 and tell me if that worked
HIT THANKS IF I HAVE HELPED YOU
sent from my smultron
---------- Post added at 07:12 AM ---------- Previous post was at 06:49 AM ----------
And mark this thread solved [by editing the first post's subject by changing [Q] to [SOLVED] ). Post your solution here. It may be very useful for members searching the forum for the same reason.
hit thanks if I've helped!
sent from my smultron

Categories

Resources