http://forum.xda-developers.com/showthread.php?t=1666171&page=75
So i tried to flash the AOSP jellybean rom from the link above for my Neo V. I flash the 4.0.4 ics first, then i flash the kernel that comes with the rom .zip file, then install the rom. Works like a charm.
However, when i try to flash the xneo aokp v1.1 kernel as recommended for better battery life, when my phone boots to the part that show the boot animation, which is "android", the boot animation keeps jumping accross the screen forever. I dont know how to describe it but i know its not normal. I thought i was about the baseband because i was on .72, then i flash the .70 baseband as recommended. Still the same.
I have tried every kernel in the xneo kernel post but none is working.
Believe me i have been searching all over the place before posting a question, but for some reason i cannot post in the development section so i post it here. Hope someone can help because as mentioned, this kernel sure is draining too much battery. Sorry for my bad english
Did OP tell u that u could flash other kernel..? If not, how dare..?
Of course, it would drain battery because it just born ...
Xneo for better battery was for the ics version, only kernel in zip or fxp cm10 kernel will work.
Sent from my MT11i using xda app-developers app
Related
Sorry for my bad henglish but i need help
I have a serious problem with the touch screen and custom rom. With the CM9, CM7 and MIUI, and its kernel, touchscreen does not work! But if I use the stock rom and kernel the touch screen works, or if I use the official ICS kernel beta with ICS Rom: KA15 Team Ice Cream or Sony Xperia Hybryd rom or ICS official Sony touch screen works ...
So I think that the touch screen works only with the official kernel!
Here's how I do:
1 - flash with fastboot kernel
2-cwm go to recovery and wipe data / factory reset, and Dalvik cache partition
3-zip file with the flash custom roms
4-reboot
But with CM9, CM7, Miui and their kernels touch screen does not respond
Please Help!
Try to use KA1x kernel with miui/CM roms; Maybe it works.
Could you give me the link of this kernel?
I have used PwnKernel 1.6 with miui and SETweaked android 2.3.x and PwnKernel ICS for KA15 and it worked very well.
PwnKernel 1.6: click
PwnKernel ICS(no bluetooth): click
Inside the zips you will find the boot.img(kernel) and Pwnkernel-modules. For wifi and bluetooth(BT only for pwnk 1.6) you have to install them under recovery after flashing the kernel.
If they don't work, take a look here; it's a list with kernels and roms for neo.
http://forum.xda-developers.com/showthread.php?t=1316394
I have used 1.6 Pwnkernel with CM7.1 but the touch screen does not work the same!
In my opinion the problem is another, looks like this user has solved the same problem but with a ZTE phone: http://www.youtube.com/watch?v=jKO9flwApD0. I tried doing the same thing but my Neo does not work without batteries, then the user updating the video wrote that he found a better way to solve with a fixed kernel. I also tried the kernel FXP but the problem returns! is very strange but I can not find solutions!
maybe it's depends on hardware, maybe your phone has other touchscreen (like there was with SE X8)
Trust me the stock Rom is much faster than many others. I've give up on trying any android 2.x based roms and the ICS ones are, at least for now, laggy and/or buggy. Don't feel bad if you can't solve this problem
Use the fxp kernel provided in the rom and download the latest cm7.2
Pwn kernel will give problems for cm7 and miui.
And since miui is based on cm7 and cm9 ...they share the same bugs...if you are facing dead portion of screen at the bottom in landscape mode...then only latest fxp kernel can help.
And if the whole screen is non functional ...then there is something wrong with your flashing...and it is obviously kernel related.
Sent from my MT11i using XDA
U should 1st flash the .64 baseband coz cm7/9 n miui need .64 baseband to work properly
Sent from my MT11i using XDA
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
I have flashed the official SE beta Ics kernel and everything works! means that the flash is correct. Right?
Please help me, i tried to update my friend's phone to ICS KA16 and the wifi stops working. I'm using Night Elf v1 kernel.
anyone experienced this or it's just me? I will try to re-flash the kernel and rom.
harristgp said:
anyone experienced this or it's just me? I will try to re-flash the kernel and rom.
Click to expand...
Click to collapse
I tried to re-flash the kernel, rom, patch. Wipe everything but no luck.
I also notice that the touchscreen is not so responsive. It takes 4-6 tries to unlock the phone.
I have issues lite those after returning to stock kernel from night elf.
Night elf has its own modules, automatically flashed with kernel. If you flash stock kernel you will need to flash stock modules. But I was not able to find them, nor extract them from ftf file.
Why post a new thread? ask it where you get the rom from
Pandemic said:
Why post a new thread? ask it where you get the rom from
Click to expand...
Click to collapse
Because I don't have permission to post in development section lately.
genyt said:
I have issues lite those after returning to stock kernel from night elf.
Night elf has its own modules, automatically flashed with kernel. If you flash stock kernel you will need to flash stock modules. But I was not able to find them, nor extract them from ftf file.
Click to expand...
Click to collapse
I think the problem is the rom itself. 3 of us using this rom experience this problem.
harristgp said:
Because I don't have permission to post in development section lately.
Click to expand...
Click to collapse
so you post a new thread:/
Pandemic said:
so you post a new thread:/
Click to expand...
Click to collapse
Of course yes, just to increase my post count and to warn other people who's planning to update their rom.
Try to flash the ICS version, after that everything is restored (guide).
After that I went to this kernel (unlock bootloader first) [KERNEL] [UPDATE] Stock ICS (4.1.A.0.562) with init.d support + root + cwm
since it gives you all the wanted features, CWM built in. Will work with stock ICS.
And his rom is very nice too: [ROM][Neo V][ICS] Spacious, smooth and light ICS. You need V2, the other is for NightElf kernel.
Maxximus007 said:
Try to flash the ICS version, after that everything is restored (guide).
After that I went to this kernel (unlock bootloader first) [KERNEL] [UPDATE] Stock ICS (4.1.A.0.562) with init.d support + root + cwm
since it gives you all the wanted features, CWM built in. Will work with stock ICS.
And his rom is very nice too: [ROM][Neo V][ICS] Spacious, smooth and light ICS. You need V2, the other is for NightElf kernel.
Click to expand...
Click to collapse
Thanks but I want the Ice Cream Sony ROM.
KA16 WIFI issue!
The same issue as you,my phone also doesn't work
i think wifi is related to kernel....try change kernel..
but i didnt had a wifi issue in KA16 with night-elf ICS rc2 full without zram..
KA16 WIFI issue
pls re-download the ROM,it's solved in the new KA16 ROM
As the title suggests, I recently tried all ICS kernels that I know and none of them booted to even the recovery screen before I got a WLOD. I really want to be on ICS so can someone please help?
I have tried all available ICS in this forum, but none of them seem to work properly or im flashing something wrong... So stick to GB for now and when you get a very stable kernel and ROM... flash that... as fas as i know Championswimmers AKOP port is almost done expect some data issues (thats what i red when i saw it last)... But if you decide to flash ICS, just amke sure you are using proper "Kernel"....
Happened the same to me with kcernel. What I did was flash a stock room with flashtool and then flash fxp-127 kernel, and that worked for me to instal remyICS.
Galcactus said:
As the title suggests, I recently tried all ICS kernels that I know and none of them booted to even the recovery screen before I got a WLOD. I really want to be on ICS so can someone please help?
Click to expand...
Click to collapse
Finally I was able to install ICS (tried both CM9 and Xperia S ICS) for both all you need is FXP kernel, currently I'm using FXP132 kernel and Xperia S ICS ROM...
Sent from my Transformer TF101 using xda app-developers app
Ok so now that I've played with JB, I wanted to try out xperia ultimate hd for instance.
Problem is, I already had a lot upgrading from stock ICS to JB FXP.
So now the question: What are the steps to be sure there 's no problem at all while I change from
Flykernel+FXP
to
Xperia ultimate hd.
I unzipped the source, but can't find any ICS kernel to flash with flashtool. And I think I can not just reboot in recovery and flash the new rom, am I wrong ?
Searched for a clue on xda, sorry if I missed a post with the answer in it.
You should flash an ics kernel like rage kernel and flash the xperia ultimate HD rom in recovery. Don't forget about the wipes, it should work
What are the issues you are afraid of?
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
You should flash an ics kernel like rage kernel and flash the xperia ultimate HD rom in recovery. Don't forget about the wipes, it should work
What are the issues you are afraid of?
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
I was afraid of not beeing able to go into recovery after flashing flykernel for ICS...
Thanks anyway !
Gabrech said:
I was afraid of not beeing able to go into recovery after flashing flykernel for ICS...
Thanks anyway !
Click to expand...
Click to collapse
If flykernel has built in cwm you will be able to
Sent from my Nexus 7 running Android 4.2.1
Gabrech said:
I was afraid of not beeing able to go into recovery after flashing flykernel for ICS...
Thanks anyway !
Click to expand...
Click to collapse
flykernel for ics has recovery just use it. You will want to flash the kernel first and then use the CWM from flykernel ics to flash the rom. Since there was no kernel inside the ROM this probably means it uses the stock kernel.
Ok thanks ! reasons why I want to change is :
-> Google Search is leeching my battery, I tried everything from disabling location or history, still draining do not know why...
-> No OTA on FXP, you guys know if there is any chances there would be on CM10 unoff ? CM10 supposed to bring OTA, do not know if FXP will.
->Still my battery is fine with smartassV2 / Sio, but I miss the auto brightness and I wanted a more stable / Battery friendly rom. Is ultimate HD the right choice ?
3 questions in one thread...:silly:
I'm facing a weird problem. It happens with ctcaers kernel and some custom ROMS like hd ultimate , zelly cream etc.
Battery percentage stays at 100% all the time.
I don't think that it is a hardware problem because battery meter is correct with other kernels. It is also correct with JB roms.
Has anyone a solution ?
Thanks
mathewgx said:
I'm facing a weird problem. It happens with ctcaers kernel and some custom ROMS like hd ultimate , zelly cream etc.
Battery percentage stays at 100% all the time.
I don't think that it is a hardware problem because battery meter is correct with other kernels. It is also correct with JB roms.
Has anyone a solution ?
Thanks
Click to expand...
Click to collapse
exactly same problem with my xperia ray (( plzzz can anyone helppp...the problem started i flashed naa kernel n then back on ics roms
mathewgx said:
I'm facing a weird problem. It happens with ctcaers kernel and some custom ROMS like hd ultimate , zelly cream etc.
Battery percentage stays at 100% all the time.
I don't think that it is a hardware problem because battery meter is correct with other kernels. It is also correct with JB roms.
Has anyone a solution ?
Thanks
Click to expand...
Click to collapse
saifjaf said:
exactly same problem with my xperia ray (( plzzz can anyone helppp...the problem started i flashed naa kernel n then back on ics roms
Click to expand...
Click to collapse
Yes i used to have the same problem.
What i did was i flash stock ics firmware and then flash the kernel and rom again.
saifjaf said:
exactly same problem with my xperia ray (( plzzz can anyone helppp...the problem started i flashed naa kernel n then back on ics roms
Click to expand...
Click to collapse
mathewgx said:
I'm facing a weird problem. It happens with ctcaers kernel and some custom ROMS like hd ultimate , zelly cream etc.
Battery percentage stays at 100% all the time.
I don't think that it is a hardware problem because battery meter is correct with other kernels. It is also correct with JB roms.
Has anyone a solution ?
Thanks
Click to expand...
Click to collapse
Even I experienced this weird problem... The things i did was,
Flash the stock ROM first and then try different ICS Kernels and boot up to see which works fine ( Because the problem is only in certain ICS Kernels , I experienced this problem only in the kernel kappa v1.7 )
Yes , flashing another kernel like Lupus solves the problem.
I will try now. Because i flashed stock rom but it isnt solves.
Try bettery calibrator from to fix the problem.
Sent from my WT19i using xda app-developers app
n_tienloi said:
I will try now. Because i flashed stock rom but it isnt solves.
Click to expand...
Click to collapse
trying stock rom alone doesn't solve the problem, after flashing stock ROM flash some Other custom Kernel and see if battery meter works ....
this problem is only in some kernel like Kappa 1.7 etc...
karthi1 said:
trying stock rom alone doesn't solve the problem, after flashing stock ROM flash some Other custom Kernel and see if battery meter works ....
this problem is only in some kernel like Kappa 1.7 etc...
Click to expand...
Click to collapse
You right! Dont need flash stock rom, only flash custom kernel. That work. I fixed my phone! Thanks alot
karthi1 said:
trying stock rom alone doesn't solve the problem, after flashing stock ROM flash some Other custom Kernel and see if battery meter works ....
this problem is only in some kernel like Kappa 1.7 etc...
Click to expand...
Click to collapse
I'm glad it helped you :good:
stock ICS kernel problem
mathewgx said:
I'm facing a weird problem. It happens with ctcaers kernel and some custom ROMS like hd ultimate , zelly cream etc.
Battery percentage stays at 100% all the time.
I don't think that it is a hardware problem because battery meter is correct with other kernels. It is also correct with JB roms.
Has anyone a solution ?
Thanks
Click to expand...
Click to collapse
Hey ..
PROBLEM :=>>
I think There is a problem with stock ICS kernel that it shows battery 100% always and you can not get right percentage of battery remaining by widgets and other apps from play store...
It happens with me when i flash stock ICS firmware ...
When you pull out the battery for some minutes/hours it shows 100% it is not hardware problem it is kernel problem...
SOLUTION :==>
This problem happened with me for sometimes i searched on google and xda but couldn't get proper solution that works 100%...
Reboot to CWM recovery...
Go to ADVANCED=> WIPE BATTERY STATS
POWER OFF phone
Flash custom kernel using flashtool in fastboot mode...
AND you are done..
This solution works for sure and i have done this for quite times 100% working with XPERIAS ...:good:
RAGE KERNEL problem :==>
I have tried rage kernel v3.2 but i am not satisfied with that ...:crying:
Battery drains quickly without usage (in 6 hours battery drains 25% without turning on screen)
Phone is getting heat because of over clocking ...
Sometimes phones hangs in such way that no hardware buttons works and screen is on touchscreen not works...i have to pull out battery and restart it...
QUESTION :==>
As there is a problem with ICS stock kernel we have to flash custom kernel ....
What is the best kernel for stock ICS .587???
rahil3108 said:
Hey ..
PROBLEM :=>>
I think There is a problem with stock ICS kernel that it shows battery 100% always and you can not get right percentage of battery remaining by widgets and other apps from play store...
It happens with me when i flash stock ICS firmware ...
When you pull out the battery for some minutes/hours it shows 100% it is not hardware problem it is kernel problem...
SOLUTION :==>
This problem happened with me for sometimes i searched on google and xda but couldn't get proper solution that works 100%...
Reboot to CWM recovery...
Go to ADVANCED=> WIPE BATTERY STATS
POWER OFF phone
Flash custom kernel using flashtool in fastboot mode...
AND you are done..
This solution works for sure and i have done this for quite times 100% working with XPERIAS ...:good:
RAGE KERNEL problem :==>
I have tried rage kernel v3.2 but i am not satisfied with that ...:crying:
Battery drains quickly without usage (in 6 hours battery drains 25% without turning on screen)
Phone is getting heat because of over clocking ...
Sometimes phones hangs in such way that no hardware buttons works and screen is on touchscreen not works...i have to pull out battery and restart it...
QUESTION :==>
As there is a problem with ICS stock kernel we have to flash custom kernel ....
What is the best kernel for stock ICS .587???
Click to expand...
Click to collapse
Best kernel is Kappa v1.6 ( but Battery is always in 100% , when I came back to ICS from JB ) So after Kappa kernel , Lupus Kernel is the best...... :good:
karthi1 said:
Best kernel is Kappa v1.6 ( but Battery is always in 100% , when I came back to ICS from JB ) So after Kappa kernel , Lupus Kernel is the best...... :good:
Click to expand...
Click to collapse
I tried KAPPA kernel but still 100% always problem is not solving by this kernel ...
Then i tried LUPUS kernel but it is working awkwardly my system was not booting up only kernel boot ...so this also failed...
Then i flashed RAGE kernel and got battery percentage back and then flashed stock kernel back by stock ftf file.......
Now if i will pull out my battery the problem will still continues .....
So i am still finding a BEST KERNEL........
Sent from my WT19i using XDA Premium 4 mobile app
rahil3108 said:
I tried KAPPA kernel but still 100% always problem is not solving by this kernel ...
Then i tried LUPUS kernel but it is working awkwardly my system was not booting up only kernel boot ...so this also failed...
Then i flashed RAGE kernel and got battery percentage back and then flashed stock kernel back by stock ftf file.......
Now if i will pull out my battery the problem will still continues .....
So i am still finding a BEST KERNEL........
Sent from my WT19i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
there are many custom kernels out there , try yourself and find the best kernel......