I'd ask in the ROM thread but I can't yet....
I'm tying to install LXDroid 0.1 and when I try to flash it from Streakdroid 0.3.2.8 it just starts the installing procedure than almost immediately returns back to the Streakdroid screen.
So feeling a but like a noob, is there something I'm missing? I've previously installed Longhorn 2.8 just fine and it seems others have successfully flashed LXDroid 0.1.
Any suggestions would be appreciated.
AmbientMix said:
I'd ask in the ROM thread but I can't yet....
I'm tying to install LXDroid 0.1 and when I try to flash it from Streakdroid 0.3.2.8 it just starts the installing procedure than almost immediately returns back to the Streakdroid screen.
So feeling a but like a noob, is there something I'm missing? I've previously installed Longhorn 2.8 just fine and it seems others have successfully flashed LXDroid 0.1.
Any suggestions would be appreciated.
Click to expand...
Click to collapse
Nevermind, I think I figured it out...
The zip file from the post needs to be rezipped without the top-level folder removed.
That is the LXDroid 0.1 folder needs to be extracted and it's contents selected for adding to a zip file.
Related
Hey guys,
I have been getting so many PM's and I am sorry not to be able to answer all of them. Most of the questions I got were from people who could not post in Dev Forum and most of the questions were the same. So I would like you all to post here as most users can help you since I cannot answer every single PM.
To all the users who already know an issue please help the people to fix it.
Please keep it organized so I would like to introduce a pattern:
Code:
ROM: ?!?
Bug(s): ?!?
Question: ?!?
For anyone who is willing to answer (that includes me)
please answer as follows:
Link to the Post (right click on the right side and copy the link to post number xyz) copy the link and paste it. And then answer the Question with
Code:
SOLUTION to linktothepost: ?!!?
using ROM ?!?
Thanks Guys
That would be a great help!
P.S: you don't need to use CODE tags.
ROM: Cyanogen Froyo CM6-Latest (based on MiniCM/CM6v2) - All working! + Hotfix v1.1
Question: Do i need second partition in SD card to install this? Or i can have only one partition and also will be able to move apps to sd card.
Thank you.
Solution to Post 2:
You won't need any second partition to move apps, I even recommend not using any other partition cause froyo does a good job with this!
ROM: MiniCM v1.1
ROM: MiniCM v1.1
Question: Is this ROM undervolted (battery life is most important for me) if not, is it possible to undervolt it easy way (through xrec for example)
Question2: does your hotfixes install through xrec?
Question3: Can we expect a full build with all hotfixes + ldpi fix included soon?
Solution to Post 4:
Q1: The overclocked version is also undervolted if you want stock and undervolted set it to 600 MHz with setcpu (on boot). The not OCed version is not undervolted but i'll add this maybe later
Q2: Yes all hotfixes on first post will always be xrec flashable only thing is to keep the order while flashing so hotfix1 first and then flash hotfix2 and so on.
Q3: Yes but for now the changes have been to small for me to upload another full release
ROM: MiniCMv1.2
ROM: MiniCMv1.2
Question: What's the best and fastest way to backup your contacts, cause it's the only thing i want to transfer to this ROM after i update.
Sorry for making so many different posts with questions, not all of them came to my mind at the same time
Solution to Post 6:
Download MyPhoneExplorer in market and download myphoneexplorer for pc enable usb debugging and connect your phone via usb open myphoneexplorer and mini pro and pc and sync contacts.
Install rom and download myphoneexplorer from market again and sync with pc again. all contacts,sms,calls,calendar can now be restored.
ROM: MiniCM v1.2
ROM: Cyanogen Froyo CM6-Latest (based on MiniCM/CM6v2) v1.3
Question: Hi, I'm new on XDA. Your job is very impressive. I need a little help.
I already installed xRecover, but every time I try to install the rom I got the following error:
Output from Recovery.log
Code:
-- Installing: SDCARD:update.zip
Finding update package...
I:Update location: SDCARD:update.zip
Opening update package...
I:Update file path: /sdcard/update.zip
minzip: Missed a local header sig (at 16)
E:Can't open /sdcard/update.zip
(bad)
Installation aborted.
Mount /dev/block/mtdblock0 on /system read-only
I've tried using install Update.zip option, also with install custom zip. Same output for both and for the original filename too. Also checked the MD5 of the file and it was ok. Later I downloaded [ROM] Cyanogen Gingerbread CM7 Final Sources (v13.0 + Hotfix #2) and I installed it without problems. Now I don't know what could be the problem. I googoled a lot about this but no one has a final answer.
Any help would be great
ROM: MiniCMv1.3
Question: I've been using this ROM almost for a day now, it's really impressive. Everything is very stable and works fine. There is only one thing, some apps are not installing from Stock market. For example Angry birds. I don't really need it, but i think it's related to the size of the app so it might come up in other big applications, cause every smaller app downloads and installs fine. Then i try to download and install it, it just starts downloading and disappears after few seconds. Deleting all cache files helps for one time, then you need to delete it again and install another big application. Is there any way to fix it without deleting the cache file?
Bug: Well this is not really a bug, just wanted to say that this ROM has really weak reception, at least until i tried your 1.4hotfix. Where i had 0 blocks i now have 2, and where i had 2 i have 4, so this hotfix definitely works for me. Thank you.
Bug2: Maybe it's just me but keyboard light is on everytime you open it, doesn't matter if it's dark or not. As far as i remember it worked differently in stock rom (maybe i'm wrong).
For the people who are asking about battery life. I have observed how much battery does it use in standby mode. And with almost the same settings as in Stock 2.1 i managed to get about 2hours with 1% of battery. It's still a bit worse than stock where i got about 3.5hours with 1%. I just recently installed reception hotfix and will try to observe the battery life now, i think i'll manage to reach about 3hours with 1%. Gona inform you all later about this.
Solution to post http://forum.xda-developers.com/showpost.php?p=13422864&postcount=9
You could move some of the larger apps on to the SD card by going to settings/applications/manage applications, select the application you want to move and select move to SD. This will make more space on the phones flash memory allowing you to download larger apps from the market. Some apps won't allow you to move them to the SD card but most seem to allow it so try a few.
I've never had this problem so can't say for sure but it seems an intuitive fix.
Cheers
Giro
well phone has plenty of free memory (168mb currently), so that's not the case. but still thanks for reply
Boot into xrecovery and format cache. Reboot and you will be fine
Sent from my U20i using XDA Premium App
Damn it was feeling smug there for a second
No problem glad to almost help
slade87 said:
Boot into xrecovery and format cache. Reboot and you will be fine
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
formating cache doesn't help, tried just now.
after formating cache reception was very poor again, restored to the state before formating and reception is fine again... strange..
translate to another languages
Hi Slade,
Nice work! Is there a way to translate (for my girlfriend) not translated parts. Some general way to do it? Thank you for your patience with us!
ROM: MiniCMv1.4, but Gingerbread too (is it different?)
language: Slovak
ROM: Cyanogen Gingerbread CM7 Final Sources
Bug(s): Only know problems: reboot, camera and radio
But i can use without problem.
Your work is great!
Thanks
ROM: Cyanogen Gingerbread CM17 Final Sources v13
Bug(s): Camera App is in some kind of asian language (yeah i know its listed that the app is buggy but maybe its helpfull), the radio and Barnacle keeps crashing when _stop_ it, if its on it works fine, all my devices can connect but when i switch it off, my U20i reboots. Also sometimes my U20i freezes for a few seconds, but no reboot.
Other stuff works fine, awesome rom!
ROM: Cyanogen Gingerbread CM17 Final Sources v13
Question: I posted the question another day on another thread, which can be found here: Original Question Thread. Probably it's better to post the answer here =P.
Sent from my HTC Desire using XDA App
ROM: Cyanogen Froyo CM6-Latest (based on MiniCM/CM6v2)
Bug: Weird problem with youtube if I ear songs from youtube (or videos) and volume is at max, I ear a stranger sound coming like ever 7-8 sec °_°;
Hi,
I've been playing around with various apps, mods, launchers etc. out here rescently, and was unable to flash some of them.
First thought was they might be incompatible with my device, but some out of hero forums aren't working as well.
some hardware info:
Device: HTC Hero [T-Mobile Google G2]
rooted: yes
ROM: Elelinux v 2.3 (based upon cyanogenmod v7)
recovery: latest clockworkmod avillable for hero, i think it's 2.5.0.7 (?)
Strange thing now is, if I try flashing some .zip via "flash .zip from sdcard" my phone doesn't seem to like, it first says "opening file... starting installation..." (or something like that, just the usual way) and then completely resets clockworkmod returning to starting page as if i just had rebooted into recovery. anyone had similar problems? or can help? would be glad about it as for now i can't use lots of wonderful mods the devs are working on
just for interest, has/ will hero get clockworkmod v3? hero CDMA already got it...
thanks in advance,
summonerofdeath
Which .zip did you try flash?
Try with Amon Ra's recovery.
I don't think it will.
Flashed for example Rover theme and extras for it. Was able to flash extras but not the theme. Weird. Wasn't able to flash some modded-to-look-like-senseUI-ADW-launcher too, always same strange behaviour like said above. As well, sometimes got the issue of successfully flashing zip files with no effect, means no changes.
Already tried amonra, no solution for me as it can't handle unsigned zip files and no special folders.
Thanks & greets,
SummonerOfDeath
Sent from my Hero using XDA App
Very odd, have others reported problems with it?
It sounds like a bad package file to me, maybe.
For the problem of flashing zips with no changes, manually mount /system and flash again. This usually sorts it.
And for your other problems get me a recovery log and I'll have a look, you can find this by flashing your non-working file and then going to advanced and report error. That will save a log on to your SD-card under clockworkmod.
Sent from my HTC Hero using XDA App
Recovery's revenge
hi,
just flashed elelinux again and wasn't able to flash...
- ADW launcher
- Angry Birds for Hero
- Rover Theme
- Optimus 2X Theme
- ArcSwift theme
attached recovery.log, had a look at it: just restarts after checking update binary... i am no pro, but this seems strange to me...
this bug starts gettin on my nerves......
greets, Summoner
ooooookay found SOME of the issues.
angry birds: just renamed . zip to .apk and installed
rover theme: had no update script, but .apks in the zip
only strange thing, some zips with update script wont install :/
SummonerOfDeath said:
ooooookay found SOME of the issues.
angry birds: just renamed . zip to .apk and installed
rover theme: had no update script, but .apks in the zip
only strange thing, some zips with update script wont install :/
Click to expand...
Click to collapse
For the zips with an update script, get a recovery log and post it here for us to look at.
I installed CM9 to my touchpad last night, but I used the wrong Gapps file, and none of them loaded. So, was wondering if there is a way to load ONLY the correct Gapps file (I found a video on doing it in CM7, but I don't think that it translates to CM).
My other option is to just uninstall everything and start over. I know that there was an ACMEUninstaller for CM7, but I can't find ACMEUninstaller2 for CM9. Would ACMEUninstaller for CM7 work on CM9?
Thanks for your help.
kbanes
flashing the correct Gapps version should do the trick..
for uninstalling CM9 i am not sure but i uninstalled Classicnerd using acmeuninstall....so i think it shud work...but i am not sure...
There is not an ACMEUninstaller2, so ACMEUninstaller works.
You can flash byway of CMW. Thats the only way to install Gapps. I'd use v11.
OK, Thanks
I appreciate you guys taking a minute to help.
kbanes
I set up the Clockworkmod derivitive for Nook Tablet and tried to flash my rom and right away it returns an error message of "installation aborted" when trying to install from my microSD card. I am trying to figure out what to do as I looked at similar threads and it didn't seem to be very helpful in solving the issue. Any help would be much appreciated thanks!
It goes through the specific messages of :
Installing:xxxxxx
Finding Update Package......
Opening Update Package......
Installing Update.....
Installation Aborted.
More data please. What model of the Nook Tablet do you have ? ( 8/16 ) And what were you trying to load ? The devil is is the details...
.
I got that message once too.
I have the 16GB Nook Tablet model, rooted it months ago. I decided to install the internal version of CM7 since i've been using it off of the microSD for months. I was trying to install CM7 to the internal memory and it failed to install it.
FlyingCat2 said:
I have the 16GB Nook Tablet model, rooted it months ago. I decided to install the internal version of CM7 since i've been using it off of the microSD for months.
Click to expand...
Click to collapse
What is the version of CWM Recovery and where did you get the CM7. Hmm, @CelticWebSolutions says he has not posted his newer, improved, better one just yet...
I got the CM7 version from http://raywaldo.com/2012/06/no-root-install-cm7-on-nook/ when the original link on the CM7 thread failed, I seached around the same thread and found a version on that link. The CM7 Recovery version is the version from here http://forum.xda-developers.com/showthread.php?t=1650927
FlyingCat2 said:
I got the CM7 version from http://raywaldo.com/2012/06/no-root-install-cm7-on-nook/ when the original link on the CM7 thread failed, I seached around the same thread and found a version on that link. The CM7 Recovery version is the version from here http://forum.xda-developers.com/showthread.php?t=1650927
Click to expand...
Click to collapse
Hmm, what does Ray Waldo say ? Did you get a good download ? Is the MD5 checksum good ? I am running @Succulent's version currently, but if @CelticWebSolution's new one is good/better, I'll be switching...
Okay, I had to try another CM7 image and that worked *flawlessly*. Now I have a new problem however, I flashed Google Apps and upon the start of it, I get an error message stating "The Application Google Services Framework has stopped unexpectedly. Please Try Again." Whenever I start it up now, I'm stuck at the screen "Welcome to Nook Tablet, Touch the Android to begin" and it appears to register my taps to the android *but* it won't respond beyond making the android logo glow. I am unable to advance within the menu. Is there any fix for this? I verified the MD5 sums on both and CM7 was working perfectly until I installed GApps.
Update: Problem Solved, Here is how I solved it. I deleted my data from CWM (if you have the default B&N 1.4.0 firmware on your microSD it will automatically draw you into CWM) so then I re-installed both CM7 and GApps at the same time and the problem was resolved. Hopefully it helps someone later down the line! Remember, for the prior issue, make *sure* you're using the internal version of the ROM and *not* the SD card version. Unlike with my experience with creating my LiveUSBs for Linux, you can't use one for the other task. Hopefully this helps!
Hey guys,
I just installed CM7.2 RC1 (2 times now) after a wipe/factory and davlik cache as well and I can't get the Droid X2 second core script to function properly. I used this and knew it was working in Eclipse 2.xx but not on CM7.2 RC1. I've setup the script with the proper permissions in init.d and can even change the /sys/devices/cpu/cpu01/online file to 1 manually, but the script is either not running or something is overwriting whatever the script changes every boot.
Anyone else still running CM7.2 RC1 on a Droid X2 and run the Second Core Script?
Here's a thread that may help or give you some info:
http://forum.xda-developers.com/showthread.php?t=1569198
tallyforeman said:
Here's a thread that may help or give you some info:
http://forum.xda-developers.com/showthread.php?t=1569198
Click to expand...
Click to collapse
That's the thread I was using to troubleshoot, but I've exhausted all those options! lol. I may SBF again and install again to see if that fixes anything. I'm not sure what could have gone wrong as I followed the instructions precisely. :\
kmedeiros said:
That's the thread I was using to troubleshoot, but I've exhausted all those options! lol. I may SBF again and install again to see if that fixes anything. I'm not sure what could have gone wrong as I followed the instructions precisely. :\
Click to expand...
Click to collapse
I've had some success running the script via script manager, but even when set to run at boot it does not. It does however activate the core when I run it after boot.
Something in CM7.2 RC1 isn't allowing the changing of the online file to 1 instead of 0 for CPU1. I'm thinking people may have been running this script a while ago before the latest RC1 release and may not even know it's not running anymore..?
I dunno, but I give up on activating the second core all the time under CM7.2 RC1 on this Droid X2.