I'm currently using energy Rom and was previously using revolution hd and one thing I noticed is that using these roms increases the latency (ping) on telus. Both these roms are based on the leaked T-Mobile ics.
I've already tried doing the build.prop tweaks to no avail.
To give an idea the average ping would be 75-150 on stock, now I'm getting double or triple that. Hmm. Any other telus users notice this?
lepban said:
I'm currently using energy Rom and was previously using revolution hd and one thing I noticed is that using these roms increases the latency (ping) on telus. Both these roms are based on the leaked T-Mobile ics.
I've already tried doing the build.prop tweaks to no avail.
To give an idea the average ping would be 75-150 on stock, now I'm getting double or triple that. Hmm. Any other telus users notice this?
Click to expand...
Click to collapse
FYI. Not sure what's causing it.
SpeedTest
ROM
Kernel / Radio
I've not modified anything and I'm on an old ROM. CM9 at dd level is not far away... that'll change things I bet.
Related
Maybe a noob question but do existing kernels work with the new radio leak? I know that the new ROMs have to have the new base just wanted to make sure kernels will not kill my phone if II install them. Any insight here devs? Huge thanks for the leak jcase major battery improvement thus far!
I searched threads and didn't find anything about this out there.
No problems on my end. Flashed a few different kernels and still doing well. BAMF 1.5 remix. Back to 4.4.2, but really like adren's 4.3c.
Got my TB charging mad fast with setcpu charging profile set to 245mghz-1ghz on smartass. Gain about 1% charge a minute!
4Geezy ON DopeDiculous's ROOTED TBeezy!
Thanks .. no 4g issues with new kernel? (If your in a 4g area)
Sent from my ADR6400L using XDA App
I flashed to the new radio and am still using the original debloat ROM with adren's 4.4.2 kernel. Everything is alright.
I did notice that trying to flash to the leaked, rooted, deodexed OTA ROM brought back all the bloat ware crap, but didn't seem to update (ie did not change the version numbers for anything except the radio, which was from earlier anyway.)
Thanks for the info. I'm hoping this update improves battery like it says
Sent from my ADR6400L using XDA App
So I updated to the latest OTA and noticed my 3g speed is less than half of what it was before and its been like that for a couple weeks now. I know its not a network issue because I activated the incredible just to see what the speed was on it and its at 1.2 Mbps like always. Anybody else seen the issue? Is there a way to keep the official froyo but downgrade to an older radio and see if that solves the problem?
are you on a custom kernel now vs before?
reason I ask is the rwin... most of the custom kernels have the rwin changed from samsung defaults (which is really low) to a number that all other android devices have...
dnoyeb said:
are you on a custom kernel now vs before?
reason I ask is the rwin... most of the custom kernels have the rwin changed from samsung defaults (which is really low) to a number that all other android devices have...
Click to expand...
Click to collapse
I've been on a custom kernel pretty much ever since I've had the phone. What is rwin, in dumbed down terms? Maybe I'll go back to the stock kernel and see what happens. Another question or two, isn't the kernel in the boot? Why doesn't cwm backup the boot on the fascinate? It does on the incredible which makes it alot easier to go back to the stock kernel or a known working kernel if I flash a kernel my phone doesn't like.
Which kernel are you on now?
Sent from my SCH-I500 using Tapatalk
dnoyeb said:
Which kernel are you on now?
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Nemesis2all. Filename is 0409-OTB-cwm2.5xx.
This probably wont help you but I have my fascinate on alltel and im experiencing the same problems . Only thing that will fix it is my changing my prl through qpst and flashing a new modem . But then it will go back to half speed after a hour or two.im going to go all the way back to stock and see what happens
Sent from my SPH-P100 using XDA Premium App
I tried five different kernels including the stock one with no difference so I'm gonna say it isn't a kernel issue. I think I'm gonna go back to 2.1 and see what happens.
Went all the way back to 2.1 and still the same thing. Updated to 2.1.1 with ea28 radio like I had before all this started and still the same. Maybe it is a network issue but it's funny how the incredible was getting the usual 3g speeds.
I'm currently using the Prime ROM on a Telus Optimus One. I've noticed that on both a Bell and Rogers SIM, the downstream speeds max out at about 1.4 mbps even though the networks are capable of better.
Is this a hardware limitation of the phone, or is there perhaps a different ROM/radio I could flash to improve my HSPA speeds? Thanks!
The same Bell SIM card in an unlocked ATT MiFi hotspot just completely flies, 5766 kbps downstream, 1483 upstream. So definitely the phone is limited but I wonder if it's the hardware or software.
Bump! Nobody has anything to add here?
cmstlist said:
I'm currently using the Prime ROM on a Telus Optimus One. I've noticed that on both a Bell and Rogers SIM, the downstream speeds max out at about 1.4 mbps even though the networks are capable of better.
Is this a hardware limitation of the phone, or is there perhaps a different ROM/radio I could flash to improve my HSPA speeds? Thanks!
Click to expand...
Click to collapse
AFAIK, the ROM/Kernel also plays a part in the network data speeds. The latest franco kernel has improved the data speeds by a huge margin. So the ROM/kernel has a part to play.
Okay, so if there is *one* ROM/kernel combination that has superior HSDPA data speeds, what would it be? I am certainly up for trying it out. I don't know if anything will be different with my Telus P500h versus the T-Mobile or Euro/Asian versions.
cmstlist said:
Okay, so if there is *one* ROM/kernel combination that has superior HSDPA data speeds, what would it be? I am certainly up for trying it out. I don't know if anything will be different with my Telus P500h versus the T-Mobile or Euro/Asian versions.
Click to expand...
Click to collapse
Try Mik 6.5.7/Franco 19.3(.32 kernel) combination. Or Mik 6.6.1/Latest Franco's .35 kernel.
The network tweaks are present in both the .32 and the .35 kernels, though the .35 kernel is a testing release as of now.
For the record I tried flashing Franco's latest 2.6.53.45 kernel over the ROM I am already using. Data speeds are still almost exactly the same. I got 1499 down / 363 up before flashing, 1499 down / 365 up after.
cmstlist said:
For the record I tried flashing Franco's latest 2.6.53.45 kernel over the ROM I am already using. Data speeds are still almost exactly the same. I got 1499 down / 363 up before flashing, 1499 down / 365 up after.
Click to expand...
Click to collapse
What is the ROM u're using?
Also the latest franco .35 kernel is found here and it is 2.6.35.14.
The v19.3 kernel is found here and it is 2.6.32.45. I assume that you're using this one.
[EDIT]: Saw the first post and you're using Prime ROM. Not sure whether franco's v19.3 is 100% compatible with your ROM.
gkarthik16 said:
What is the ROM u're using?
Also the latest franco .35 kernel is found here and it is 2.6.35.14.
The v19.3 kernel is found here and it is 2.6.32.45. I assume that you're using this one.
[EDIT]: Saw the first post and you're using Prime ROM. Not sure whether franco's v19.3 is 100% compatible with your ROM.
Click to expand...
Click to collapse
Prime is an LG-based modded Froyo ROM. It seemed to be stable when I booted it after installing the kernel.
I meant 2.6.32.45 - yes, that one.
Your first link goes to the LG V20B update, not to a kernel.
cmstlist said:
Prime is an LG-based modded Froyo ROM. It seemed to be stable when I booted it after installing the kernel.
I meant 2.6.32.45 - yes, that one.
Your first link goes to the LG V20B update, not to a kernel.
Click to expand...
Click to collapse
Thanks for pointing out, changed the link now.
As for the ROM, I would suggest that you check with people who're using the Prime ROM, as I've not used it till now.
I noticed E2 is way faster. BUT big but, E2 has way worse reception.
Am i the only one?
I was on Jersey Shore today and I couldn't get any data working.
If that is the case for you, then you could flash a different modem I suppose.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2 Beta-5
I seem to have better reception.
Sent from my SAMSUNG-SGH-I717 using XDA
I've noticed way faster data speeds on E2. I used to see about 2 down, now I see about 6 down. And I've had no signal issues, always 4 or 5 bars. Afaik, different modems can give vastly different performance for different people. All depends on your area and what not. Just experiment with the various modems. I'm just glad Samsung finally got one right for my area, as I've only ever seen about 3 down on any phone I've owned until now.
Sent from my GT-I9300 using Tapatalk 2
The AT&T version of both of those modems, which is all us Canadians have access to thus far, has, for me, had much worse data speed numbers (non LTE anyway) on the Telus network than the stock GB Telus modem.
The E2 modem is, in my very non scientific testing, slightly slower for us here in Canada. (again, HSPA only, no LTE coverage here yet)
I'd really be interested in understanding what is actually different between carrier modem implementations. I noticed a similar speed differential in the stock modems.
I tried adjusting the RF preferences but that doesn't solve it. Its almost like AT&T doesn't have the same implementation of HSPA+ as the Canadian carriers.
I say all that with some degree of confidence in the numbers... having installed a variety of ROMs n modems and the results from the stock Telus modem are consistently better when I can use it.
Currently on the One Beta and associated LE2 modem, it shows very wonky "bars" by times...like none, in what should be solid five bar area.
My fourth floor office which never wavered from five bars on stock.. Consistently now shows any where from 0 to 3... But it still transmits and receives calls and data.
A buddy of mine is testing the Telus 4.0 release with Premium Suite... so in any event, it shouldn't be too much longer.
Sent from my SAMSUNG-SGH-I717 using XDA
is it really that much faster? ive yet to upgrade from UCLD3 because its just running fine, wanted the next time i update my phone to be the last (offical ICS since i doubt we will get a update any time soon after that)
I noticed a big difference in speed. UCLD3 used to stutter a lot and freeze up from time to time for no apparent reason. Haven't had any of those issues with UCLE2. Also, bugs that annoyed me in UCLD3 were fixed in UCLE2. I don't see any reason not to flash UCLE2.
I've been having a bug on ucle2 where I cant keep a wifi connection for in app downloads resulting in the download stopping I've tested on multiple ucle2 roms and confirmed no issue on ucld3 not sure how I got so special because I haven't seen anyone else report this that I know of
sam.jh said:
I've been having a bug on ucle2 where I cant keep a wifi connection for in app downloads resulting in the download stopping I've tested on multiple ucle2 roms and confirmed no issue on ucld3 not sure how I got so special because I haven't seen anyone else report this that I know of
Click to expand...
Click to collapse
That actually happened to me. I reverted to D. Seems not as crazy fast but stable. With E I got 1mB (that's bytes) per second. D tops at about 600.
sam.jh said:
I've been having a bug on ucle2 where I cant keep a wifi connection for in app downloads resulting in the download stopping I've tested on multiple ucle2 roms and confirmed no issue on ucld3 not sure how I got so special because I haven't seen anyone else report this that I know of
Click to expand...
Click to collapse
Wifi is great here stays on all day..no problems yet im in day4 or5 lol
sent from team perfections ics rom
JB calhoun said:
Wifi is great here stays on all day..no problems yet im in day4 or5 lol
Click to expand...
Click to collapse
my wifi performs completely fine until I try to do an in app download such as gta3, modern combat 3, order and chaos etc etc.. couldn't figure out why I'm the only one, did full wipes clean installs tried flapps and apps ucle2 roms, even when I went to CM9 which uses the ucle2 kernel I had the problem.. so frustrating lol then go back to ucld3 and problem never shows up once
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
woody296 said:
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
Click to expand...
Click to collapse
I haven't noticed any 3G speed increases. The closest 4G tower is a hour away, so I can't comment on that. As far as overall speed though, it's probably entirely dependent on the ROM. I went back to a GB based ROM (Mean 4.5) because it seems faster and more stable than the ICS ROMS I've used.
woody296 said:
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
Click to expand...
Click to collapse
Some developers do tweak data settings that the radio interface daemon uses to tell the rom when and how to request data. I would put money on it that HTC didn't put the effort into Sense 4 to make it more data efficient. Could be a coincidence that the tower(s) in ur area are performing at full 100% but i doubt the later.
Gonna flash a 4.0 Rom to test this
woody296 said:
I noticed my 3g speeds were about double or better immediately after i flashed a sense 4 rom (one shot). Up to this point i was leery of using a rom with no wimax, but this changed my mind. Has anyone else seen increased speeds that's running a sense 4 rom?
Click to expand...
Click to collapse
Which ROM did you flash? I've tried several ICS roms and the overall user experience is faster including web browsing on 3G. That could be related to the many tweaks that the developers employ.
The latest ICS I tried was Cool ICS v5. It was probably the most complete ICS Rom i've tried. Everything works. I switched back to GB because it could not do tethering.
One shot alpha, at this time you can't hook to pc and use as a disc drive after Rom is installed so might be good to have another Rom on sdcard to flash to later.
acevo3d said:
Which ROM did you flash? I've tried several ICS roms and the overall user experience is faster including web browsing on 3G. That could be related to the many tweaks that the developers employ.
The latest ICS I tried was Cool ICS v5. It was probably the most complete ICS Rom i've tried. Everything works. I switched back to GB because it could not do tethering.
Click to expand...
Click to collapse
Tethering works fine on all ICS roms, with "wifi tether" app, it does require two settings, the profile should be set to "Generic ICS" and then check that "Routing Fix" is enabled, these settings are specific to the Evo 3D on ICS
USB tethering.. well idk about that. PDANET and FoxFi can likely do that.