So here is the thing:
A few days ago my screen froze, on my SG2, and i coudlnt turn it back on, it freezes and the text saying samgung galaxy s2 9100i---blalb.a
I have no idea about rooting or anything. But i searched google for ages for things that might help me phone work again.
I tried to push home key + on/off key+UP key. but that DOES NOT WORK
Only thing i can do is odin mode.
So i have been trying to install a new system on it, but not working
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLPU_I9100XXLQ6_I9100XEZLP3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
It waits for setup connection for a long time.
NOW i wait.. and this comes:
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I know there should be a green bar going, but nothing turns green...
ANYONE GOT A IDEA? im a noob btw.
Heeeeeeeeeeeelp
odin flash?
how about odin download flash? press down+home+power to get into download mode and flash thru odin
seriousineedhelp said:
So here is the thing:
A few days ago my screen froze, on my SG2, and i coudlnt turn it back on, it freezes and the text saying samgung galaxy s2 9100i---blalb.a
I have no idea about rooting or anything. But i searched google for ages for things that might help me phone work again.
I tried to push home key + on/off key+UP key. but that DOES NOT WORK
Only thing i can do is odin mode.
So i have been trying to install a new system on it, but not working
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLPU_I9100XXLQ6_I9100XEZLP3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
It waits for setup connection for a long time.
NOW i wait.. and this comes:
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I know there should be a green bar going, but nothing turns green...
ANYONE GOT A IDEA? im a noob btw.
Heeeeeeeeeeeelp
Click to expand...
Click to collapse
First off... if your using odin then you need to go into download mode
Button Combos:
Download Mode: Volume Down+Home+Power
Recovery Mode: Volume Up+Home+Power
Once in recovery use volume keys to navigate, home button to select and power button to go back
this page is what your looking for http://forum.xda-developers.com/showthread.php?t=1075278
seriousineedhelp said:
So here is the thing:
A few days ago my screen froze, on my SG2, and i coudlnt turn it back on, it freezes and the text saying samgung galaxy s2 9100i---blalb.a
I have no idea about rooting or anything. But i searched google for ages for things that might help me phone work again.
I tried to push home key + on/off key+UP key. but that DOES NOT WORK
Only thing i can do is odin mode.
So i have been trying to install a new system on it, but not working
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLPU_I9100XXLQ6_I9100XEZLP3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
It waits for setup connection for a long time.
NOW i wait.. and this comes:
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I know there should be a green bar going, but nothing turns green...
ANYONE GOT A IDEA? im a noob btw.
Heeeeeeeeeeeelp
Click to expand...
Click to collapse
So you have the Galaxy SII I9100 and not the Galaxy SII I9100G?
I am saying this because a pal of mine managed to flash I9100 Firmware on his I9100G device and he had a similar Odin error.
Like kengcc said, go into Odin mode and press volume up to continue through the warning and then connect to Odin. It should recognize your device and then Flash the Firmware.
can you go into download modus? If not, usb jig could help.
New here? READ THIS THREAD FIRST. What Is Recovery & Download Mode?
Related
hi guys,
i have an att note and was trying to root of odin
went through all the process, ODIN even Gave me the green light pass
and reboot the phone, its just that the phone came back on and never seem to pass the samsung screens
so ive decide to do a recover with CWM recovery i got this
and the phone stuck on the same screen and
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-touch-i717-120409.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
not sure if this help but in download menu i have custom binary yes (5counts)
guys please help, or did i fried my phone
thanks
Thread moved to Q and A - please post in accordance with XDA rules.
boot into the recovery you installed and wipe cache/dalvik
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Do you have a Canadian version of the note? If so you have to disconnect the phone from the pc as soon as Odin shows PASS, pull the battery from the phone, put the battery back in the phone and enter recovery with the vol + and - and the power button.
So I have the SGS II of my sister here.
She told me that the phone freezed and when she rebooted it, it only showed the bootlogo for hours.
I tried to flash a new firmware with Odin but it keeps giving me the message that it failed.
When I boot the phone up regularly, it shows the message "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
It isn't rooted or modded in any way and is branding free.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's the message Odin gives me.
Any help for me?
danslecarton said:
So I have the SGS II of my sister here.
She told me that the phone freezed and when she rebooted it, it only showed the bootlogo for hours.
I tried to flash a new firmware with Odin but it keeps giving me the message that it failed.
When I boot the phone up regularly, it shows the message "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
It isn't rooted or modded in any way and is branding free.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100DBTLS7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
That's the message Odin gives me.
Any help for me?
Click to expand...
Click to collapse
turn off the phone and instead of holding vol down to get into recovery mode, do vol up + home + power, you can then do a factory reset and flash a stock rom as normal through odin. just worked for me!
TomFrom said:
turn off the phone and instead of holding vol down to get into recovery mode, do vol up + home + power, you can then do a factory reset and flash a stock rom as normal through odin. just worked for me!
Click to expand...
Click to collapse
Can't get into recovery mode since it isn't rooted. When I press vol down + home + power, I only get the bootlogo
danslecarton said:
Can't get into recovery mode since it isn't rooted. When I press vol down + home + power, I only get the bootlogo
Click to expand...
Click to collapse
Don't think you need root. I didn't. Try it! Vol up +home +power
I9100?
Say hi to your sister fir me, and flash JB leak.
Sent from the little guy
TomFrom said:
Don't think you need root. I didn't. Try it! Vol up +home +power
Click to expand...
Click to collapse
I already tried but it only gives me the bootlogo
And I meant Vol up + home + power in the previous post
Vol down gets me to download mode
You need to press the combo for 7 sec, it'll reboot a couple of times before going to recovery.
Sent from the little guy
Hello,
My wife has this phone and the phone accidentaly turned off and after that he was not able to boot. It was stucked on samsung logo. I tryied recovery mode and wipe phone, but it not helped. After that phone started stucking on galaxy S2 logo (before samsung logo). I was able only to go into download mode. I tried to follow this guide: wccftech.com/install-latest-android-412-jelly-bean-galaxy-s2-i9100-official-firmware but in odin (v3.07) it failed after some time (while progress bar is not moving from beginning, I see only one px of it). And now phone is showing message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Please can you help me how can I recover phone back? thanks a lot for any help
it is czech version bought in samsung shop. So I downloaded XEZ-I9100XWLSD-20130301125313 (but I am not totaly sure about version, this should be for czech)
On load PDA
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100XEZLS1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
After press Start
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
After some time
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dawee said:
Hello,
My wife has this phone and the phone accidentaly turned off and after that he was not able to boot. It was stucked on samsung logo. I tryied recovery mode and wipe phone, but it not helped. After that phone started stucking on galaxy S2 logo (before samsung logo). I was able only to go into download mode. I tried to follow this guide: wccftech.com/install-latest-android-412-jelly-bean-galaxy-s2-i9100-official-firmware but in odin (v3.07) it failed after some time (while progress bar is not moving from beginning, I see only one px of it). And now phone is showing message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". Please can you help me how can I recover phone back? thanks a lot for any help
it is czech version bought in samsung shop. So I downloaded XEZ-I9100XWLSD-20130301125313 (but I am not totaly sure about version, this should be for czech)
On load PDA
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100XXLS8_I9100XEZLS1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
After press Start
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
After some time
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Seems like you have brick bug but I have no idea how to fix it.
Next I have tried to follow this guide: http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
I am not totaly sure about kernel version, but because this phone was pursached on his release, I have downloaded GINGERBREAD VERSION. I have tried to flash it but without success too. Green progress bar is moving to the end and after some time it writes "fail"
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Kernel_I9100XXKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> zImage
<ID:0/010> NAND Write Start!!
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi XDA.
I've been trying to search for solutions to my problem, but I really can't seem to find any. If a thread similar to mine exists already, I am sorry.
Today i tried flashing a LiquidSmooth 4.4.4 ROM to my device, but the install of the ROM gives an error (Status 7). Now the phone is stuck in a bootloop.
Now I am trying to flash stock ROM with Odin 3.07 but none of the .tar-files I've been trying will work. I have also tried to install TWRP Recovery through ODIN just now, but it fails every time. I can't seem to figure out what to do now.
Hope you guys can help me. Thanks in advance!
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT: When I try to boot up the device just with the power button it now shows white static noise all over the screen. I am in a panic right now, as I don't have the money to buy a new phone. I am afraid I have stupidly installed some kind of bootchain made for a Verizon S3 instead of the International version like mine.
EmilBakke said:
This is what ODIN writes when trying to flash the stock ROM.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_L710VPUCMK3_L710SPRCMK3_2034598_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
tallman43 said:
That's the Galaxy S3 L710 not S3 I9300. Either you are flashing the wrong firmware or your in the wrong forum >> http://forum.xda-developers.com/galaxy-s3-sprint <<
Click to expand...
Click to collapse
Well I surely am an idiot. Thank you so much, it works fine now! Have a nice day.
I've followed the super easy instructions on how to use CF Auto Root but still cannot make it all the way through the first part of the root process. It starts running fine and then stops at NAND Write Start. At one point it got past that but failed at again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Earlier it said something about the PIT partition, but I can't seem to find a 32GB pit file for the Sprint S5 - and it's not saying that any more. I am kind of at a loss here, and now my phone won't boot at all. What else can I do?
Thanks!
Try a different computer, seriously man. I had the same issue. Had to use my dinosaur Windows XP Setup for it to work.