hi guys,
i am trying to run Temple run on my Defy (red lens) running quarx 22 aug build for Defy+. But its really slow and at times unplayable. Can any one suggest what to do so that it runs smoothly ...
adix149 said:
hi guys,
i am trying to run Temple run on my Defy (red lens) running quarx 22 aug build for Defy+. But its really slow and at times unplayable. Can any one suggest what to do so that it runs smoothly ...
Click to expand...
Click to collapse
supercharge your phone
Make sure you have loads of free RAM and your Defy overclocked :good:
It's still a nightly
CM 10 is still on the before the middle stage of being stable so it is still lagy, unstable, and all of that staff so just wait for the most stable release. After every 3 releases I try one to see what they had came up to but find it still very slow and lagy and after I reinstall my Apps it's even more unstable, so I just reinstall my fav. ROM with my tweaks. I'm on defy + CM 7.2 Nightly but it's very stable and my daily ROM:good:.
Playing temple run on my cm10, I scored 13 million highscore. Cleared all achievements.
brajesh.sharma87 said:
Playing temple run on my cm10, I scored 13 million highscore. Cleared all achievements.
Click to expand...
Click to collapse
@brajesh
whats your Defy setup.?? Did you install any spl apps ??
adix149 said:
@brajesh
whats your Defy setup.?? Did you install any spl apps ??
Click to expand...
Click to collapse
Its quite Simple
Make sure you have a Clean install of CM10. always use the latest cause it gets more and more stable every time
OverClock you defy. To Do This on CM10 go to [settings -> Performance -> Processor] and set the minimum frequency to 300 and maximum to 1000 and Tick Set on Boot.
Under performance set memory management to "allow purging of assets."
Also under performance set surface improvement To "Disable dithering"(I dont know what this one does but I have to this way...)
Edit:Forgot to mention this - Using minimal gapps instead of full gapps also saves you some RAM.I used to Lag alot on Full gapps but then Installed minimal gapps and its smooth as silk now
Reboot,clear cache and Dalvik and try to play again see if it works
You can also use oother CPU governors.I use BoostedAssv2.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
vedhasd said:
supercharge your phone
Click to expand...
Click to collapse
I read a lot of times and also have tested myself to notice that Supercharging does not help alot in CM10....
It infact sometimes makes it slower... The defy with cm10 is fast enough on its own anyways
Well atleast for me it is Just telling what I think....
veddandekar said:
Its quite Simple
Make sure you have a Clean install of CM10. always use the latest cause it gets more and more stable every time
OverClock you defy. To Do This on CM10 go to [settings -> Performance -> Processor] and set the minimum frequency to 300 and maximum to 1000 and Tick Set on Boot.
Under performance set memory management to "allow purging of assets."
Also under performance set surface improvement To "Disable dithering"(I dont know what this one does but I have to this way...)
Edit:Forgot to mention this - Using minimal gapps instead of full gapps also saves you some RAM.I used to Lag alot on Full gapps but then Installed minimal gapps and its smooth as silk now
Reboot,clear cache and Dalvik and try to play again see if it works
You can also use oother CPU governors.I use BoostedAssv2.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I read a lot of times and also have tested myself to notice that Supercharging does not help alot in CM10....
It infact sometimes makes it slower... The defy with cm10 is fast enough on its own anyways
Well atleast for me it is Just telling what I think....
Click to expand...
Click to collapse
Well what all things you have said to follow those thinngs and much more are done by supercharger! Um it does not make a huge difference ... come on you can't get s2's performance without changing h/w
And yea minimal gapps helps save RAM
Sent from my MB525 using xda app-developers app
it works smoothly on my Cm10 defy
I have tried it on cm10 quarks, it works fine for me.
I use ver 1.0.1 which is betterfor me
Its smooth in Epsylon CM10, I also play big games like Asphalt5 and 6 smooth in CM10
afterwards qoirmul
it works great in cm10 with cpu at 1000MHz
I've left hwa selected for the game, it works pretty well. Defy red lense.
Sent from my MB526 using xda app-developers app
I'm having difficulties on latest 11/10 rom, is anybody able to play temple run smoothly on the latest roms with custom kernel?
Playing on 24/09 was fine for me.
Mine is very smooth. There's no need to overclock, but at 1.2 GHz it's super smooth. Make sure you have the 27.10 build. To overclock go to Bootmenu, CPU settings, and set Clk4 to 1200 and Vsel4 to 60 or 62 or until it's stable (max 65). If you want you can also set Clk3 to 900. Select Save when done and reboot. It should be safe within Vsel 65.
Sent from my flying overclocked Motorola Defy+ MB526 with CyanogenMod 10 and custom kernel using XDA app
i'm on latest build of quarx's CM10 and it goes smoother than all roms i tried
Related
Yes ..on my defy
Last night i installed a New rom.
Im talking about the last PIKACHU ROM.
Now Im playing with no lag and without Chainfire!!!!!
Try it ..it seems to be the solution ..why?? I do not know.
Push the thanks botton for this discover
Sent from my MB525 using XDA
how to install tha latest pikachu on cm7.1 ?? any idea plz share with me..
shud i go back to froyo then root flash miui pikachu or directly can flash miui over cm7.1 stable..plz anyone clarify me..
sonrics1993 said:
Yes ..on my defy
Last night i installed a New rom.
Im talking about the last PIKACHU ROM.
Now Im playing with no lag and without Chainfire!!!!!
Try it ..it seems to be the solution ..why?? I do not know.
Push the thanks botton for this discover
Sent from my MB525 using XDA
Click to expand...
Click to collapse
If you not use Chainfire, you play the "non-hd" version
I run it on CM9, and without Chainfire it doesn' t lag, but with Chainfire it lag
Yes, it is not hd, but if I use chainfire it has parts without buildings, instead of this appears red lines.
Whatever,now I can play it with no lag
Sent from my MB525 using XDA
NEW!!
I installed a bad baseband in the pikachu ROM, now I have installed the last White Rabbit edition for DEFY! no DEFY+
I have the same result.
NO LAG, BUT NO HD.
Enjoy.
DIRECT!
darwin007 said:
shud i go back to froyo then root flash miui pikachu or directly can flash miui over cm7.1 stable..plz anyone clarify me..
Click to expand...
Click to collapse
Directly if you have the froyo kernel. If not, then you have to install the GB kernel.
Greeting
I think Pikachu runs better because of Tweety's build.prop tweaks and init scripts.
About Chainfire -- I believe those drivers are outdated now, especially with CM9 -- nothing runs better with Chainfire on CM9, at least not anything I've tried. A good example is the Xperia CosmicFlow Live Wallpaper, without Chainfire it starts now (very crappy fps, but it does work now) -- enable Chainfire and it won't start at all. I've also noticed that Chainfire + HWUI = Crap -- Chainfire is still awesome on CM7, just not so much with 9.
Once I even forgotted to re-overclock to 1.2, I played one hour in 600MHz and it was working great yet ! Without Chainfire of course. This game seems not to be so performance-demanding than I was expecting so...
Sent to the best forum ever from France using my awesome CM9 Motorola Defy
Galacy Player 5.0
I'm getting HUGE lag with my Player 5.0. I'm running Entropy's kernel, and overclocked to 1.3 ghz with Chainfire. What's going on!?
freshpintreez said:
I'm getting HUGE lag with my Player 5.0. I'm running Entropy's kernel, and overclocked to 1.3 ghz with Chainfire. What's going on!?
Click to expand...
Click to collapse
Can't find the hardware specs of that thing anywhere. Does the device have a GPU of any kind? Have you tried running the game without chainfire?
Its probably a Samsung Galaxy S WiFi 5.0 (or Player 5.0) - 1GHz CPU,512mb RAM,and I think it does not have any GPU accelerator.
N.O.V.A 3 works great on cm10, using v1.0.1
compatibility issue..
I downloaded the data and the game apk and installed it first on cm7 and then on cm10 but it says that "your device is not compatible please ask for a refund" what is wrong with my defy..why am I doing wrong..?
anmol7ify said:
I downloaded the data and the game apk and installed it first on cm7 and then on cm10 but it says that "your device is not compatible please ask for a refund" what is wrong with my defy..why am I doing wrong..?
Click to expand...
Click to collapse
Download through WiFi, delete apk first and start over, this happened with dh3 for absolutely no reason, not that its any good if your build.prop has been changed that could also give issues :banghead:
Sent from Iron man's Jellybean powered suit
i have a bro..that he play this on the GingeReload by my m8 verdaguer..and play fine...and he not use chainfire too..my bro venom of another forum..play this game too on Motogamer from GA..
My friend bought xperia mini with stock ROM version 2.3.4, and i have xperia Live With Walkman.
with custom ROM CM7.2 FreeXperiaProject 150 http://forum.xda-developers.com/showthread.php?t=1226715
and with custom rage kernel 2.9 for FXP. http://forum.xda-developers.com/showpost.php?p=24553704&postcount=75
So how the hell does she get smooth playing flash video from this TV site: http://www.navidiku.rs/tv-uzivo/tv-pink
While i have to overclock my phone to 1800Mhz to make it bearlly smooth...HOW is that possible???
I checked she had flash player 10.3.186.3 and i downloaded and installed that one but its the same thing...:/ i had Flash 11 before.
I can play Youtube video 360p smooth and around 1400Mhz 480p smooth. And phone is overall very snappy and fast, i mean i can play N64 games smooth, like Extreme G 2 for example...
So why is mine phone choppy while her is running smooth on stock 1000Mhz...?
1400...1800MHz are you serious.... :what:
You should not overclock your phone to such high frequency... It will burn down your CPU...
Echelonex said:
So why is mine phone choppy while her is running smooth on stock 1000Mhz...?
Click to expand...
Click to collapse
Could be a number of things, but without knowing every app on your Phone, additional tweaks you've made/not made etc it's hard to say.
XperienceD said:
Could be a number of things, but without knowing every app on your Phone, additional tweaks you've made/not made etc it's hard to say.
Click to expand...
Click to collapse
I did not do any adittional tweaks, also, only apps that are running in the background are Settings and Lg keyboard, because i kill all the running apps when i reboot my phone to free all the RAM.
Also, as far as i know, you can overclock your phone as long as it doesn't overheat... But still, that's why i want to make it go smooth, i want to make overclocking less needed...
Looking at the kernel thread it appears to be quite old, try using the CM7 Kernel instead, make some tweaks and see how that goes.
Echelonex said:
I did not do any adittional tweaks, also, only apps that are running in the background are Settings and Lg keyboard, because i kill all the running apps when i reboot my phone to free all the RAM.
Also, as far as i know, you can overclock your phone as long as it doesn't overheat... But still, that's why i want to make it go smooth, i want to make overclocking less needed...
Click to expand...
Click to collapse
Just to be clear, killing some apps in ram manually is not, efficient; it may really affect the performance (many topics/debates already out there). Try testing it with uninstalled apps (clean rom with minimal needed apps). And I agree many other factors may still affect it(scripts, tweaks, etc).
K thx. I will try out some other ROMs and kernels...hope to find something similar to CyanogenMod...I cant use kernel provided with ROM because phone is then loaded with bugs (no second speaker, camera freezing, touchscreen problems...etc) because fix for these only works on Rage kernel.
I recently got android 4.0.4 for my phone. I used this link: http://www.arulraj.net/2012/07/upgrade-samsung-galaxy-5-to-ice-cream-sandwich.html The problem is that my phone is extremely slow and many apps just force close on start. How can i speed up my phone? I was researching this problem and many ppl said something about kernels. Should I get that for my phone and how will it help? Also, what apps help make it faster and what else can i do to make my phone faster?Btw the phone is rooted.
Banana1238 said:
I recently got android 4.0.4 for my phone. I used this link: http://www.arulraj.net/2012/07/upgrade-samsung-galaxy-5-to-ice-cream-sandwich.html The problem is that my phone is extremely slow and many apps just force close on start. How can i speed up my phone? I was researching this problem and many ppl said something about kernels. Should I get that for my phone and how will it help? Also, what apps help make it faster and what else can i do to make my phone faster?Btw the phone is rooted.
Click to expand...
Click to collapse
Don't touch the kernel if you are inexperienced in such things you will just screw the rom up... go into developement settings and overclock your cpu to 768mhz for a start. governer... smartass v2 should be fine. use a task manager to kill background apps etc. there are many things you can do but remember that 4.0 has higher requirements than our phone has so performance will always be an issue... if u want have a look into swap partitions, cpu overclocking, cpu governers, I/O Schedulers, Caching etc... there is so much to tweaking performance to get the most out of your device
When I stop apps that r running, they just come back within 5 seconds. Also, i am already at 768mhz. 768 mhz has made it a little faster, but some apps wont launch and just stop when i launch them. Is there a way to get them to work?
Banana1238 said:
When I stop apps that r running, they just come back within 5 seconds. Also, i am already at 768mhz. 768 mhz has made it a little faster, but some apps wont launch and just stop when i launch them. Is there a way to get them to work?
Click to expand...
Click to collapse
I really would suggest you change roms mate, either CyanogenMod 7.2 or 10.1
10.1 is Android 4.2 and 7.2 is 2.3.7
naturally 7.2 is fastest and most stable.
But why is it that some apps work and others dont?
How about increasing the ram? Can I do that?
Will this work? http://www.droidiser.com/2012/05/how-to-increase-internal-memory-and-ram.html
Banana1238 said:
Will this work? http://www.droidiser.com/2012/05/how-to-increase-internal-memory-and-ram.html
Click to expand...
Click to collapse
You cannot increase the RAM like in a computer as it is attached to the motherboard directly. That link describes using a swap partition on the sd that acts kind of like ram but it is not ram itself, it is slower than ram and less efficent however swap can be useful. I have tried swap and noticed no real difference in performance at all but you could sure try it... just remember to enable swap in the cyanogenmod settings otherwise the partition will do nothing and u lose valuable sd card space
brianmillar9 said:
I really would suggest you change roms mate, either CyanogenMod 7.2 or 10.1
10.1 is Android 4.2 and 7.2 is 2.3.7
naturally 7.2 is fastest and most stable.
Click to expand...
Click to collapse
i'm using CM7,should i use CM10 or MIUI or still using CM7?
sorry about my english
Use seeder app set to aggresive, no need to oc just set gov to performance. If you not use any ramscript use romtool box go to memory manager try optimum preset. And also go to sd booster to boost your sd speed cache.
That's all Regards
Sent from East Borneo Island using Honey Bear's Phone
Honestly, make an effort to purchase a new phone. I've had a i5000 foir almost a year and sometimes I almost went crazy due to its slowness.
You can try using a (fast) sdcard as supplementary memory, but it will be still slow. And no way to use a CyanogenMod later than 7.2. Stick with this at minimum.
But you can find really good bargains at ebay. Please consider it.
Hey GUYS ,
With our ageing DEFY , everyday new exciting games come on play store
I want you all to write the all the latest games you can play on DEFY ., smoothly and without any lags ..
i tried some heave games , but wasnt able to play them smoothly ..
1- ZOmbiewood
2- Man of steel
3- real racing 3 .. all of these lags 2 much ..
games that work ---
1-Hill climb racing
2- Bike Race
3- Re-VOLT premium
4- Minion Rush
5- Zen Pinball HD
I've just installed Minion Rush and it's working great (I'm on latest CM10.1 build, btw)
niksy+ said:
I've just installed Minion Rush and it's working great (I'm on latest CM10.1 build, btw)
Click to expand...
Click to collapse
Minion Rush is very laggy on PAC 4.2.2
Zen Pinball HD finally works without lags with CM10.1 and Smartass governor (CPU 1.2 GHz).
Re-Volt and Temple Run 2 work quite smooth with MSAA 4x enabled and Subway Surfers without.
wow , i never knew that re-volt existed on android ,
i played re-volt on PC some year back , and i was a huge fan of it
downloading it ...
and yes minion rush is laggy on 4.x rom for me
Shubhamqweasd said:
wow , i never knew that re-volt existed on android ,
i played re-volt on PC some year back , and i was a huge fan of it
downloading it ...
and yes minion rush is laggy on 4.x rom for me
Click to expand...
Click to collapse
I just set a 56 000 record yesterday, it's really good on my phone, don't know why it would lag on yours
My set-up: 16/06 CM10.1; CPU @1GHz + smartass governor; deadline i/o scheduler.
Other than that, only customisations I've done is that I've disabled some of the google services (Play Store, Play services and backup transport frozen with T.B.Pro)
niksy+ said:
I just set a 56 000 record yesterday, it's really good on my phone, don't know why it would lag on yours
My set-up: 16/06 CM10.1; CPU @1GHz + smartass governor; deadline i/o scheduler.
Other than that, only customisations I've done is that I've disabled some of the google services (Play Store, Play services and backup transport frozen with T.B.Pro)
Click to expand...
Click to collapse
It's quite smooth on latest CM10 @1.1GHz + Interactive + greenified apps
Games are much smoother with CM10.1 and Smartass.
As did for "Man of Steel" work for u guy? Here only gives first screen and closes
rodrigoswz said:
As did for "Man of Steel" work for u guy? Here only gives first screen and closes
Click to expand...
Click to collapse
It works, but its too laggy to play.
Hill climb racing and Bike Race work well on cm10.1
Sent from my MB526 using xda app-developers app
For Minion Rush was very laggy, also now with overclocked cpu (1.3Ghz) it's unplayable -.-
The download on first start, took long, because it couldn't find my inet connection
Header Soccer also works fine, but it isn't a really good game, i think.
"Can you Escape" crashed on start up, have anybody else this problem ?
The simpsons -> Springfield works fine, but sometimes when the game is loading the phone reboots ^^. (one-off my phone was unusable because of that crash :S)
btw: my phone is defy+ with cm10.1
Sorry for my bad english, please correct me if there is a fatal grammar error
Yup, Minion Rush is little laggy at begining but after 1-2 minutes of playing, everything is ok. It happen some small lowered fps at city and with many objects but that's not problem. Mine problem with this game is that after i connected it with FB for the first time, it reseted and, i started all over again. After that, i never made secesstull connection with FB, always there is "unable to connect". Also, game is starting from beggining every day when i open game. So i always starts from 0. I just cant forget mine score od 68.900
EmptySD said:
Yup, Minion Rush is little laggy at begining but after 1-2 minutes of playing, everything is ok. It happen some small lowered fps at city and with many objects but that's not problem. Mine problem with this game is that after i connected it with FB for the first time, it reseted and, i started all over again. After that, i never made secesstull connection with FB, always there is "unable to connect". Also, game is starting from beggining every day when i open game. So i always starts from 0. I just cant forget mine score od 68.900
Click to expand...
Click to collapse
Same problem with the game resetting itself here, have no idea what the hell is wrong with it... Are you on CM10/CM10.1 or is it the same on other ROMs, as well?
One more thing - it's no longer laggy, ever! With the latest kernel updates from Blechd0se, it's veeery smooth and FAST! It doesn't even lag on the introductory jump anymore (well, it does on the first one)
(I'm using 18% zRAM, which is not available on Quarx's "stock" kernel in the latest nightly (he disabled ALL kinds of swap, because he thinks that's the culprit of the random data loss bug), but I think that it would be smooth without zRAM, as well)
p.s. I'm not even overclocked ATM
niksy+ said:
Same problem with the game resetting itself here, have no idea what the hell is wrong with it... Are you on CM10/CM10.1 or is it the same on other ROMs, as well?
One more thing - it's no longer laggy, ever! With the latest kernel updates from Blechd0se, it's veeery smooth and FAST! It doesn't even lag on the introductory jump anymore (well, it does on the first one)
(I'm using 18% zRAM, which is not available on Quarx's "stock" kernel in the latest nightly (he disabled ALL kinds of swap, because he thinks that's the culprit of the random data loss bug), but I think that it would be smooth without zRAM, as well)
p.s. I'm not even overclocked ATM
Click to expand...
Click to collapse
I was using Quarx's build from 16.06. There happen some problems with changing settings. When i change performance CPU governor settings block. After that i can only restart phone and settings are back to interactive.
2 days ago i installed build 09.07 and same problem here. Also there was new problems. Mine sound for SMS was gone. I receive message but there is no any sound, when i play some video phone reboot. So today i swap data and installed again build from 09.07 and settings work, also SMS sounds, i didn't tested video but i see that is already reported problem.
Looks that i am far away from topic better to stop now.
Can you please PM link of ROM?
This Thread is useful for me
thank you guys
Sent from my HTC Sensation Z710e using Tapatalk 2
offroad legends
Evervolv is back
Here you can find latest Oreo Builds
http://evervolv.com/devices/tenderloin
New builds every day ?
Ok,
Download is ok
http://evervolv.com/get/ev_tenderloin-8.1.0-nightly-2018.08.26.zip
korporalkarotte said:
Evervolv is back
Click to expand...
Click to collapse
I noticed. Anyone know what’s going on?
Well, the logs for all the Tenderloin builds have no commits - the intriguing thing is looking at Gerrit and seeing all the Android P commits going on. None that I saw for Tenderloin, but a lot of work being done on P.... I know Flintman has said he had P booting on Tenderloin elsewhere - so who knows what's up, but it seems something is baking!
Just like to know if is there similar with durty-unicorns ?
Any way to root this build??
A_Pac1 said:
Any way to root this build??
Click to expand...
Click to collapse
Yup
Excellent news
Is there any reason to have a new update on a daily basis?
I guess it is automatic.
You can click on log to see the changes :
"2018.09.25..2018.09.26
No new commits found."
Steelskinz said:
I guess it is automatic.
You can click on log to see the changes :
"2018.09.25..2018.09.26
No new commits found."
Click to expand...
Click to collapse
I saw that; However, I didn't test it though, to have an opinion about it.
Steelskinz said:
I guess it is automatic.
You can click on log to see the changes :
"2018.09.25..2018.09.26
No new commits found."
Click to expand...
Click to collapse
It's just a bot. It mindlessly pumps out builds of the entire ROM, not just the tenderloin (HP) device.. It may or may not have commits in other parts of the ROM.
shumash said:
It's just a bot. It mindlessly pumps out builds of the entire ROM, not just the tenderloin (HP) device.. It may or may not have commits in other parts of the ROM.
Click to expand...
Click to collapse
I installed the ROM from 9-26-2018 and it does have changes to it. Now you can see the external USB partition when connected to a PC, it did not worked before. It may be a bot but the new commits are been apply and fixing bugs. The most important is that new commits are uploaded, then the bot will regenerate the new build. If anyone working on the TP ROM have access or that can upload the commits, this ROM will be very close to perfection by now. Is a shame is not been taking care of properly as we get new builds very fast! ( Even the camera partially works, you can see yourself when opening the app, it may need a very small tweak! )
There is even work been done for p-9.0 or at least files that are updated!
https://github.com/Evervolv/android_device_hp_tenderloin-common/tree/p-9.0
I'm having an issue with 10/6 build. If the tablet sleeps for more than a couple minutes, I need to force a reboot by holding the home button and power buttons. It will drain the battery quickly while in this state.
Ideas?
The Evervolv oreo 8.1 builts are not stable, the issue that you are experiencing is one of the bugs.
Another one is activating battery saver and deactivating will reboot.
Use DU built, is stable.
https://cdn.dirtyunicorns.com/api/download/tenderloin/Rc/du_tenderloin-v12.5.1-20180920-1118-RC.zip
greetings and thanks for so much effort and desire are excellent really appreciate and recognize their work
---------- Post added at 11:07 PM ---------- Previous post was at 11:00 PM ----------
https://github.com/Evervolv/android_device_hp_tenderloin-common/tree/p-9.0
http://evervolv.com/devices/tenderloin
HP_TOUCHPAD said:
The Evervolv oreo 8.1 builts are not stable, the issue that you are experiencing is one of the bugs.
Another one is activating battery saver and deactivating will reboot.
Use DU built, is stable.
https://cdn.dirtyunicorns.com/api/download/tenderloin/Rc/du_tenderloin-v12.5.1-20180920-1118-RC.zip
Click to expand...
Click to collapse
The DU build lags badly on my device. The Evervolv nightly from November 1st seems very snappy by comparison. Haven't tested it much but first impression is that I haven't found a ROM this responsive for the TouchPad in quite a long time...
crabnebula said:
The DU build lags badly on my device. The Evervolv nightly from November 1st seems very snappy by comparison. Haven't tested it much but first impression is that I haven't found a ROM this responsive for the TouchPad in quite a long time...
Click to expand...
Click to collapse
What makes a ROM faster is the Kernel and the CPU speed plus governor settings.
One setting does not work for every user as everyone uses the tablet differently.
Yes the last Evervolv is a good one. But also DU works great if you do not need to use the camera.
You can make the tablet faster by using the overclock kernel and change the CPU settings to your likes.
HP_TOUCHPAD said:
What makes a ROM faster is the Kernel and the CPU speed plus governor settings.
One setting does not work for every user as everyone uses the tablet differently.
Yes the last Evervolv is a good one. But also DU works great if you do not need to use the camera.
You can make the tablet faster by using the overclock kernel and change the CPU settings to your likes.
Click to expand...
Click to collapse
I do not need the camera, but all ROMS I've tried past KitKat suffer from bad slowdowns, where everything appears to regularly freeze for several seconds, scrolling in web pages is very jerky, etc. Overclocking helps a little, but not much. I unfortunately experienced the same behaviour with DU 12.5, even after a full wipe.
crabnebula said:
I do not need the camera, but all ROMS I've tried past KitKat suffer from bad slowdowns, where everything appears to regularly freeze for several seconds, scrolling in web pages is very jerky, etc. Overclocking helps a little, but not much. I unfortunately experienced the same behaviour with DU 12.5, even after a full wipe.
Click to expand...
Click to collapse
Unfortunately not all touchpads were build the same and there are variation on their parts, the most important CPU . That is the reason that an optimized setting can not be apply to all, because it will make some unusable.
That does not mean that the one with the worse quality parts can not perform well, all of them can with the right settings and it takes just some basic testing that the user must do and apply its own settings, there is only one that matters:
Find the lowest and maximum CPU frequency: Get the Overclock Kernel and an app that will allow to change the frequency, there are a lot out there.
Change the lowest it will work and the maximum by selecting one by one, if once selected it freeze or reboots then it will be the previous frequency:
In general this is the basic for maximum frequency:
All should perform at the maximum 1782000
Better: 1836000
Best: 1890000
At those higher frequency there could be some reboots depends on the settings:
All should be stable at when overclok 1782000.
Now comes the trick settings:
Some Kernel app will allow to apply settings to each cpu core individually.
Set the cpu0 to highest 1782000 and select Governor to Performance ( it will run constantly at that speed)
Set the cpu1 to lower anywhere from 1674000-1512000
Also select your minimum on both 192000 - 384000
Now change the voltage: Maximum to be stable 1400000 (it can be apply in increment until it reach the maximum to the 1782000 frequency.
Set the zRAM size to 2gb size ( maximum )
That is all!
Now the browser is important, use the latest version as of right now, some are faster than others, try them all!
All ROMS should be able to perform decent and give you great performance.
In the latest DU, using Opera or Firefox you can browse the web even go to youtube website and use it as if it was the native google app, no delays fast playing no lag ( all depends on your internet speed )