Related
I installed the ICS rom by zeubea on my htc legend, i followed the installation and it worked good. and then i installed the gapps, and now my phone is bootlooping.
when i try to do fastboot and re-install the rom, i get this message which says something about legendimg.zip file, and it quickly disappears.
and when i try to go to recovery the device shows the backgroud of the recovery but nothing happens.
if anyone understand my question and can help me do something to make my legend work again i will thank you very much
guyshapira said:
I installed the ICS rom by zeubea on my htc legend, i followed the installation and it worked good. and then i installed the gapps, and now my phone is bootlooping.
when i try to do fastboot and re-install the rom, i get this message which says something about legendimg.zip file, and it quickly disappears.
and when i try to go to recovery the device shows the backgroud of the recovery but nothing happens.
if anyone understand my question and can help me do something to make my legend work again i will thank you very much
Click to expand...
Click to collapse
Just read the whole thread in dev section. Someone already figure it out.
Sent from my legend using XDA
petalyaa said:
Just read the whole thread in dev section. Someone already figure it out.
Sent from my legend using XDA
Click to expand...
Click to collapse
the problem is that when i try to go to recovery i see the recovery background image and nothing happens so i can't install other version of the rom.
never mind, i got it to work.
all i had to do is press VOL UP + POWER button.
everyday i learn new things
Tried to update from CM7.2 to CM9.1 by instruction:
1. wipe data
2. wipe cache
3. wipe dalvik
4. flash rom..
5. reboot
and 9.1 didnt run at all.. bootloop..
also tried
1. wipe all
2. flash
3. wipe all
bootloop...
1. wipe all
2. flash
3. wipe all
4. gapps
5. wipe all
bootloop...
rolled back to 7.2 - works fine..
p.s.
sorry for my english
Why are you NOT wiping (formatting) boot and system? If you don't your leaving all the files for the previous rom installed hence why your having issues...
Installation is so easy if you use a bit of thought,
Format boot, system, data, cache and SDext DONOT FORMAT SD CARD!
Flash rom then flash gapps then reboot.
Sent from my Legend using xda app-developers app
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
demonoid phenomenom said:
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
Click to expand...
Click to collapse
tried it and didn't work
cherupop said:
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
Click to expand...
Click to collapse
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
sathelate said:
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
Click to expand...
Click to collapse
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
bluegrass55 said:
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
Click to expand...
Click to collapse
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
cherupop said:
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
i think that root user cant use that app .. or at least JB users because i was having this problem since ive first flash paranoid :S (but i never tried before Cm10 Rom like on cm7/9)
I really want to make this to work, soo, let me know if you find anything on your side, and ill let you know on mine
I had the same problem, just installed gapps frontera Epinter and that's it. Check the post of the Paranoid ROM theres a user that post those gapps.
Hope you can solve it. I just did
Cheers!!!
Enviado desde mi Atrix 4G usando Tapatalk 2
sathelate said:
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
Click to expand...
Click to collapse
The power button behaviour has become very random and strange.
With the successful insatll of this rom I had to install "Button Remap apk" which set the search button to lock screen and longer press brings up the power button menu of reboot etc.
However with this rom the music player and the one I installed did not recognise a whole batch of a particular music file. So I went into recovery to restore a previous CM7 backup and hey presto the power button worked when selecting options. So I did the restore. The power button worked a couple of times then nothing. And the "Button Remap app" dosen't work in CM7.
I think the Aroma prep was the culprit.
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
wrong gapps. wipe system and repeat with the correct ones
Please, I know it may seem like I am a some n00b who just registered for answers, but I really need them. I've been browsing this forum (unregistered) but just haven't had anything to post as of late. Sorry guys, I really need help! And you members are the ONLY ones I can turn to at this moment.
Thanks so much, I really appreciate any help!
Glebun said:
wrong gapps. wipe system and repeat with the correct ones
Click to expand...
Click to collapse
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
format system from recovery. Google it. then re flash the rom with the correct gapps
Glebun said:
format system from recovery. Google it. then re flash the rom with the correct gapps
Click to expand...
Click to collapse
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
killakk said:
Hey dude, cheers for the reply!!
How can I wipe the system? I've tried through the recovery menu, I selected wipe data/factory reset and wipe cache partition. Still got the same thing. Do I have to install stock firmware via Odin??
Thanks mate, I'm just going full retard over here from all of this pressure that I'm feeling right now.
Click to expand...
Click to collapse
In advanced format system
Sent from my GT-I9300 using xda premium
killakk said:
Hey dude, I've selected wipe data/factory reset and wipe cache partition. Still got the same thing.
Unless hard factory reset is something else??
Please help!
Click to expand...
Click to collapse
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Glebun said:
I said nothing about a factory reset. I said "wipe system". A google search would give you the answer
Click to expand...
Click to collapse
Sorry dude, you've got me confused. I've googled that to no avail, sorry for being a n00b. I really need your help mate!
Ver3go said:
In advanced format system
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hey dude, thanks for the reply but how can I go to Advanced Format System pal??
I'm sorry but I'm a n00b and my phone does not start up, keep getting the cyanogen mod logo and after that the errors "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped".
Please help!
Sorry guys I know I'm making it hard on you all because you're having to explain everything to me but I really need help on this, sorry if I'm being a nuisance but I'm really going crazy in the head right now
killakk said:
Please I need help guys! I earlier today rooted my Samsung Galaxy S3 international variant i9300. After this I went about to install a custom ROM the Cyanogen Mod 10.1 4.2.2 rom, and to do this I followed the this method on YouTube:
After I completed the installation I it showed the Cyanogen Mod logo which looked amazing but after this I kept getting "unfortunately setup wizard has stopped" and "unfortunately google framework services has stopped". I am sure that I maybe installed the older version of gapps and this is why this is happening. How can I fix this issue?
Please help! I have tried almost everything!
Thank you!!!
Click to expand...
Click to collapse
wiping from CWM recovery or stock samsung recovery?
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Glebun said:
googled "format system recovry", got this
www.addictivetips.com/mobile/what-i...-and-how-to-use-it-on-android-complete-guide/
Click to expand...
Click to collapse
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
sriram231092 said:
wiping from CWM recovery or stock samsung recovery?
Click to expand...
Click to collapse
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Hey dude, I've tried this already using stock samsung recovery, still to no avail. Getting same thing.
Click to expand...
Click to collapse
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
We all were noobs at some point i'll help u out
Lets start from top.
To get cwm:
- flash cwm or twrp from odin ( i'll trust u know how to do that ) ( go for cwm this time )
To get phone up and running on cm:
-Re-download cm and respective gapps
-Turn off your phone
-Turn your phone on into recovery by pressing power+center+vol down (when the phone boots release power) and you'll be on cwm
-conect your phone to pc
-on cwm go to advanced settings
- mount usb storage
- phone will apear on pc, copy rom and gapps
- once done return to main "page" of cwm and wipe data/factory reset
- then install zip and select the rom zip first after zip is installed install gaps
- reboot phone after
- you'll be just fine
If that dont work out will talk about that later.
Take care
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
sriram231092 said:
flash CWM touch recovery(latest ones) via desktop odin. then put your CM10.1 and latest gapps .zip files on your sdcard. reboot into CWM touch recovery and then flash the files after wiping data, cache and dalvik cahce!
Click to expand...
Click to collapse
Thank you so very much dude, I love you!
killakk said:
May the lord praise thou, I am indebted towards your wisdom and kindness. You shall forever be one of my masters!
Thank you so much!
Thank you so very much dude, I love you!
Click to expand...
Click to collapse
:good: :good:
killakk said:
Cheers mate! But I can't access my mobile phone so how could I install ClockworkMod Recovery? It keeps giving me the error messages.
Click to expand...
Click to collapse
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Glebun said:
next time, this is how you solve problems:
http://lmgtfy.com/?q=how+to+install+cwm
Click to expand...
Click to collapse
This was already solved
What was that post for anyway ?
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Take that into acount next time please.
Take care
Sent from my GT-I9300 using xda premium
Ver3go said:
This was already solved
Click to expand...
Click to collapse
hence the "next time"
Ver3go said:
What was that post for anyway ?
Click to expand...
Click to collapse
for showing him how easy it is to solve problems yourself instead if asking
Ver3go said:
Do have any need to pick on them i dont like spoon feeding aswell and i dont go poking them! There's otherways for them to learn!
Click to expand...
Click to collapse
I didn't pick on him nor was I being aggressive. Searching is THE BEST way to learn.
Hi,
I was running BeanStalk-4.4.270 03/18/14 by zymphad. Im not sure what the kernel was.
I tried flashing the ROM by ronasimi in this thread.
The ROM that i picked was cm-11-20140817-UNOFFICIAL-geeb & the kernel was gbx-kernel-lights-CM11.0-CAF.zip. Apart from this i picked the Google Stock package of PA GApps from here.
For flashing i did the following :-
1. backed up all my apps using TB from BeanStalk.
2. loaded the ROM, the kernel & GApps zip files into a folder on my sdcard.
3. rebooted into recovery(TWRP 2.6.xx), backed up my original ROM and lined up all the three flashable zips and flashed them. (The flash was successful)
4. Then i rebooted into system. But after reaching the home screen, i was getting errors "Unfortunately, the process com.android.systemui has stopped" & "Unfortunately, the process com.android.phone has stopped". I remembered it might be because i forgot to wipe dalvik & cache.
5. I again rebooted into recovery, wiped dalvik & system cache and tried booting into system. It was still giving the same issues.
6. I tried restoring my old ROM's backup. Surprisingly even that wouldn't solve the issue.
7. So i again flashed the CM11 ROMs. But this time, the boot process is getting stuck at the boot animation.
My Qs are as follows:-
1. Did i miss anything or do something that is not recommended (or maybe even dangerous)?
2. What should be my next step in resolving this issue?
Any help appreciated.
gautam_k said:
Hi,
I was running BeanStalk-4.4.270 03/18/14 by zymphad. Im not sure what the kernel was.
I tried flashing the ROM by ronasimi in this thread.
The ROM that i picked was cm-11-20140817-UNOFFICIAL-geeb & the kernel was gbx-kernel-lights-CM11.0-CAF.zip. Apart from this i picked the Google Stock package of PA GApps from here.
For flashing i did the following :-
1. backed up all my apps using TB from BeanStalk.
2. loaded the ROM, the kernel & GApps zip files into a folder on my sdcard.
3. rebooted into recovery(TWRP 2.6.xx), backed up my original ROM and lined up all the three flashable zips and flashed them. (The flash was successful)
4. Then i rebooted into system. But after reaching the home screen, i was getting errors "Unfortunately, the process com.android.systemui has stopped" & "Unfortunately, the process com.android.phone has stopped". I remembered it might be because i forgot to wipe dalvik & cache.
5. I again rebooted into recovery, wiped dalvik & system cache and tried booting into system. It was still giving the same issues.
6. I tried restoring my old ROM's backup. Surprisingly even that wouldn't solve the issue.
7. So i again flashed the CM11 ROMs. But this time, the boot process is getting stuck at the boot animation.
My Qs are as follows:-
1. Did i miss anything or do something that is not recommended (or maybe even dangerous)?
2. What should be my next step in resolving this issue?
Any help appreciated.
Click to expand...
Click to collapse
Flash TWRP 2.7.1 or Philz's touch CWM
than do a clean install
Wipe data and Format system
Flash any ROM (here CM 11 ) and Gapps
Flash proper kernel ( for CM 11 old Gprij-X kernel or neighborhood kernel)
Wipe cache and delvick cache
reboot profit
For more info :
ShoaibAhmed said:
Flash TWRP 2.7.1 or Philz's touch CWM
than do a clean install
Wipe data and Format system
Flash any ROM (here CM 11 ) and Gapps
Flash proper kernel ( for CM 11 old Gprij-X kernel or neighborhood kernel)
Wipe cache and delvick cache
reboot profit
For more info :
Click to expand...
Click to collapse
I tried flashing using TWRP but the flash failed. then I saw the video and thought of giving philz touch cwm a try. it worked like a charm. Thanks a lot for the help. For kernel I flashed gprojx-kernel-lights-CM11.0-CAF-20140414.zip. Everything seems to be working now. Only thing is that I can't seem to turn off NFC. Every time I deselect the check box, go somewhere else and come back, the NFC check box is already checked.
Any tips on that? It's eating up my battery
gautam_k said:
I tried flashing using TWRP but the flash failed. then I saw the video and thought of giving philz touch cwm a try. it worked like a charm. Thanks a lot for the help. For kernel I flashed gprojx-kernel-lights-CM11.0-CAF-20140414.zip. Everything seems to be working now. Only thing is that I can't seem to turn off NFC. Every time I deselect the check box, go somewhere else and come back, the NFC check box is already checked.
Any tips on that? It's eating up my battery
Click to expand...
Click to collapse
Reboot once and then try to turn off NFC , it will work.
ShoaibAhmed said:
Reboot once and then try to turn off NFC , it will work.
Click to expand...
Click to collapse
Awesome! Thanks a lot man.
One last Q p)- I spent almost 30mins combing through settings but I couldn't find a 3G/2G switch. Is it hidden somewhere or it doesn't exist yet in CM11?
gautam_k said:
Awesome! Thanks a lot man.
One last Q p)- I spent almost 30mins combing through settings but I couldn't find a 3G/2G switch. Is it hidden somewhere or it doesn't exist yet in CM11?
Click to expand...
Click to collapse
Settings--->Mobile networks--->Prefered network type--> change it from "LTE" to 2G/3G
ShoaibAhmed said:
Settings--->Mobile networks--->Prefered network type--> change it from "LTE" to 2G/3G
Click to expand...
Click to collapse
i am actually looking for a shortcut for the same in notification draweer or quick settings pulldown...apologies for not making it clear before.
gautam_k said:
i am actually looking for a shortcut for the same in notification draweer or quick settings pulldown...apologies for not making it clear before.
Click to expand...
Click to collapse
Found the shortcut in Settings> Notification Drawer> Quick settings panel> Tiles & layout> Network mode
For some reason i was thinking that this will lead me to the GSM/WCDMA switch.