Related
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
demonoid phenomenom said:
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
Click to expand...
Click to collapse
tried it and didn't work
cherupop said:
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
Click to expand...
Click to collapse
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
sathelate said:
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
Click to expand...
Click to collapse
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
bluegrass55 said:
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
Click to expand...
Click to collapse
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
cherupop said:
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
i think that root user cant use that app .. or at least JB users because i was having this problem since ive first flash paranoid :S (but i never tried before Cm10 Rom like on cm7/9)
I really want to make this to work, soo, let me know if you find anything on your side, and ill let you know on mine
I had the same problem, just installed gapps frontera Epinter and that's it. Check the post of the Paranoid ROM theres a user that post those gapps.
Hope you can solve it. I just did
Cheers!!!
Enviado desde mi Atrix 4G usando Tapatalk 2
sathelate said:
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
Click to expand...
Click to collapse
The power button behaviour has become very random and strange.
With the successful insatll of this rom I had to install "Button Remap apk" which set the search button to lock screen and longer press brings up the power button menu of reboot etc.
However with this rom the music player and the one I installed did not recognise a whole batch of a particular music file. So I went into recovery to restore a previous CM7 backup and hey presto the power button worked when selecting options. So I did the restore. The power button worked a couple of times then nothing. And the "Button Remap app" dosen't work in CM7.
I think the Aroma prep was the culprit.
"Unfortunately Setup Wizard has stopped working" - after trying to install Gapps
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
RostokMcSpoons said:
So I've successfully managed to get the current CM nightly on my S2, after a few trials and tribulations.
I'd left my phone alone for a bit, all working fine.
Then I decide to get it sorted properly, and install the Google Apps.
Googling told me to use the 20120429 version. So I downloaded that (using the phone's browser), went into CWM and installed it. No joy.
Silly me, I didn't reset + clear cache. So I did that. Still no joy.
So now I've re-installed CM and done a reset + clear cache.
And still I'm stuck looking at the 'setup wizard stopped working' messages, in an endless soul-destroying loop
What can I do?
Would re-installing a stock rom and then re-rooting do the trick?
I can't get Odin to connect, and so I've copied the zipped 4.0.3 rom into the internal SD card, but CWM fails (is it because it has a .dll file alongside the .tar?)
I'm wishing I'd left the phone alone now
Click to expand...
Click to collapse
What version of CyanogenMod are we talking about here? You need to be more specific.
themadba said:
What version of CyanogenMod are we talking about here? You need to be more specific.
Click to expand...
Click to collapse
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
RostokMcSpoons said:
Right, maybe I found the cause of the problem - I've installed cm-10.1-20130125-NIGHTLY-i9100 but when I wanted to find out which version of Gapps I needed I couldn't be sure what it was so I decided to just find the original download page again. But somehow I managed to find this page http://get.cm/?device=galaxys2 (a rather too easy mistake to make?) ...which has version 9! So I've tried to install the wrong Gapps file
Click to expand...
Click to collapse
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
themadba said:
I thought you might have! I'm not sure whether a simple flash of the correct gapps file will solve your problem or whether you will need to wipe data/factory reset, wipe cache and wipe dalvik cache, reinstall the CM10.1 nightly and then flash the correct gapps file which can be found here: http://goo.im/gapps/gapps-jb-20121212-signed.zip
Try just wiping your cache and dalvik cache in recovery and flashing the new gapps file I linked, if the flashing process doesn't last for atleast 20 seconds, then you may have to carry out the steps I listed above for a complete reinstall.
Click to expand...
Click to collapse
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Edit: Damn, I couldn't get to sleep without fixing it first, and luckily I did: I rebooted my pc, and the explorer eventually did show the contents ok (just very slowly). I dragged the zip in, installed it with CWM and *huzzah* it's working! The only odd thing is the camera has disappeared from the applications...
I can wait until tomorrow to work that out.
Thanks for your help
RostokMcSpoons said:
Thanks but I've now tried the reset / wipes / reinstalls multiple times to no avail. And now when I connect my phone to my pc to try to put the correct gapps zip on there, Windows Explorer is only showing a few of the folders on Internal Storage. The stuff that I've already got at root isn't showing. Have I knackered my phone?
I'm going to have to leave it til the morning - the battery is nearly empty.
Click to expand...
Click to collapse
That's strange. I recently flashed a wrong gapps file and it led to some things not working, especially the Play Store. I tried just wiping the cache and dalvik cache and flashing, but that didn't work. So I did a wipe data/factory reset, wipe cache and wipe dalvik cache, reflashed the ROM and then flashed gapps. I think I may have wiped the cache and dalvik cache once more for good luck, and then repaired permissions in the advanced section of recovery. Phone booted up fine and all apps worked perfectly. I doubt the phone is knackered, perhaps try and different ROM just to make sure it boots fine, and then try flash CM10.1 again. Good luck
Samsung Galaxy s2 CM10 trouble Setup Wizard has stopped working
Im from Asia and I guess Samsung s2 int’l version has different features. I already updated my firmware to JB 4.1.2 (leaked) and since I am not satisfied with it,I rooted it and installed siyah as well as cm10 + gapps from XDA links. I followed everything according to the posts and vids.The problem is that after rebooting and CM start up showed up,the next prompt was UNFORTUNATELY,SET UP WIZARD HAS STOPPED WORKING. What’s wrong? I have tried 6x times and no one worked correctly. HELP me!
I was under the same problem few days ago...
flashed 4.2.2 gapps on 4.1.2..
and succumbed to 'unfortunately setup wizard has stopped' error, until i flashed the respective 4.2.2 gapps.
but sadly it ate away my internal memory (cant help )
So the point is
just flash the respective gapps
and then the ROM again
Hi I just installed cyangenmod and it works but setup wizard is crashing and I don't know how to fix this my phone its pretty much unusable. Need help urgently!
The key is to wipe regular cache partition after installing Gapp zip! :]
I think you have the key. I get my cm10.1.5 and I flashed a realy slim gapps (11mb), but after that I didn't wipe cache and dalvik. So the phone didn't woke up because it get stucked in the wizzard setup. So I have to do as u said. And like the other said, reinstall the rom and then the gapps.
Galaxy 5
After using android 2.1 update 1 in my samsung galaxy 5 (GT-I5503)
I updated it with 2.2 froyo then 2.3 then 4.0 then 4.1.
last time I updated to 4.2 CyanogenMod
Before that I could work good in others. But in 4.2 there were problem of contacts in SIM card, these contacts not showing in device.
Then after my device not detacting SIM card for last few months.
Now my phone showing "Unfortunately, Setup Wizard has stopped."
How can I start my phone?
Galaxy Grand CM12 error
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
fixed this error(setup wizard or google play service has stoped).first you must install cm13 after that install your gapps(use phliz toch recovery) then reboot device.you Will notic that device doesn't boot or you'll have the same problem(setup wizard).come back to recovery and install the other recovery(change phliz touch to CWM) then with wipe install the same ROM and after that install gapps.the gapps won't install so reboot the device.enjoy your ROM with gapps
fix
FOR ANY1 facing this problem on cm13 setup wizard stopped.
just do as i say it's actually funny but it worked for me for the very 1st time.
I tried all the fix given like clear cache or flash new gapps but nothing solved the problem.
So just do what i say.
when u see the setup wizard stopped error.
on that screen just touch all the corner of the screen of ur phone
staring from the top left corner then the top right and so to the bottom right corner and then at last the left most corner.
Just keep trying i doesn't happen for the first time.
Most of u would be thinking it's funny but it actually worked just give it a try.
it helped me might work for u as well
---------- Post added at 07:49 PM ---------- Previous post was at 07:43 PM ----------
dkarry said:
Hi,
I have succesfully flashed my galaxy grand and installed CM12 as per instructions given. But i am constantly facing issue of "Unfortunately Setup wizard has stopped". I have tried all the methods mentioned, but still facing same.
Pls Help
Click to expand...
Click to collapse
bro just start your phone and on the screen where u see the error
leave it as it is and do this:
touch the top most left corner twice like tapping on it nad then the right most corner then the right bottom corner then lastly the left most corner.
it helped me might help u as well
sir,
i have samsung galaxy star GT-S5282 model but i am unabble to start the Device because of error of unfortunately samsung setup wizard has stoppeed
I installed gapps-2013-03-01 from here http://goo.im/gapps on CM10.1 from here http://download.cyanogenmod.com/?device=fascinatemtd following this guide http://forum.xda-developers.com/showthread.php?t=1238070, letting the phone boot after CM installation, but no apps show up. How do I make the Play Store/Market show up?
It looks like nobody knows. What do I do now? I need Google Apps to make this phone worth using...
What you do mean letting the phone boot after CM installation? Just install CM10.1 and flash Gapps directly after and then boot the phone. If it still doesn't show up then something went wrong, and you might need to start fresh from Odin.
http://goo.im/gapps/gapps-jb-20130301-signed.zip
http://goo.im/gapps/gapps-jb-20130301-signed.zip
Reboot back into recovery,, choose that zip to install,, and then reboot ROM when finished,,,
With cm10.1 you may have to enable in developer options,, the advanced reboot menu,,
You may also have to enable developer options,,,
In "about phone" scroll down to "build number “ then tap repeatedly about 7-10 times till it says you've enabled it
If none of that works,,, from powered off do "3 finger boot" into recover and continue
.
hhp_211 said:
http://goo.im/gapps/gapps-jb-20130301-signed.zip
http://goo.im/gapps/gapps-jb-20130301-signed.zip
Reboot back into recovery,, choose that zip to install,, and then reboot ROM when finished,,,
With cm10.1 you may have to enable in developer options,, the advanced reboot menu,,
You may also have to enable developer options,,,
In "about phone" scroll down to "build number “ then tap repeatedly about 7-10 times till it says you've enabled it
If none of that works,,, from powered off do "3 finger boot" into recover and continue
.
Click to expand...
Click to collapse
Crawshayi said:
What you do mean letting the phone boot after CM installation? Just install CM10.1 and flash Gapps directly after and then boot the phone. If it still doesn't show up then something went wrong, and you might need to start fresh from Odin.
Click to expand...
Click to collapse
I tried installing gapps right after the OS, and I got a bunch of force closes and it was frozen at the lock screen indefinitely. I've tried starting fresh from Odin and redoing the entire installation, with the same results.
That's the gapps version I've been trying to use Crawshayi, and it doesn't do anything. I also tried gapps-jb-20121011-signed.zip and that one didn't work either. I don't have any problems with the 3-finger recovery booting.
Thanks for the suggestions, I really appreciate it. Any other ideas?
Maybe try one these gapps
http://goo.im/devs/Unjust/Domination/Domination-Gapps-June-10-13.zip
This one uses the aroma installer,,, you get to choose which individual apps to install,,, very nice
http://www.slimroms.net/index.php/downloads/all/finish/383-addons/2874-aio-aroma-4-2-2-build-6-x
you should install the correct gapps for your rom.
hhp_211 said:
Maybe try one these gapps
http://goo.im/devs/Unjust/Domination/Domination-Gapps-June-10-13.zip
This one uses the aroma installer,,, you get to choose which individual apps to install,,, very nice
http://www.slimroms.net/index.php/downloads/all/finish/383-addons/2874-aio-aroma-4-2-2-build-6-x
Click to expand...
Click to collapse
I just tried flashing both of those zips (I had to google the second one because that link wanted a site referral), and still nothing's showing up.
Well, i suggest you boot to recovery,,, do a "wipe data/factory reset"
Then, while still in recovery, flash the original gapps (jb - 20130301)
This is the method for gapps install::
:: Install zip from sdcard
:: Choose zip from sdcard
:: scroll to gapps file/select
:: confirm yes to install
:: reboot system
hhp_211 said:
Well, i suggest you boot to recovery,,, do a "wipe data/factory reset"
Then, while still in recovery, flash the original gapps (jb - 20130301)
This is the method for gapps install::
:: Install zip from sdcard
:: Choose zip from sdcard
:: scroll to gapps file/select
:: confirm yes to install
:: reboot system
Click to expand...
Click to collapse
I've tried this. More ideas?
Well if you don't want to try that again,,, do a factory reset/data wipe, reinstall ROM of choice and reinstall the newest gapps zip
hhp_211 said:
Well if you don't want to try that again,,, do a factory reset/data wipe, reinstall ROM of choice and reinstall the newest gapps zip
Click to expand...
Click to collapse
I've done this already, three times. I doubt a fourth time will change anything.
Only thing else i can say is to odin back to eh03 and back up to cm10.1,,, following the steps in section 4 exactly as listed (print it out and cross off list as you go along) so you don't miss anything or add any unnecessary steps..
Something somewhere is not right with installation..
.
hhp_211 said:
Only thing else i can say is to odin back to eh03 and back up to cm10.1,,, following the steps in section 4 exactly as listed (print it out and cross off list as you go along) so you don't miss anything or add any unnecessary steps..
Something somewhere is not right with installation..
.
Click to expand...
Click to collapse
Done, and still no play store.
Try a different sd card if possible and/or usb cable. If either of those are malfunctioning it would cause strange issues like this.
Lumify said:
Done, and still no play store.[/QUOTE
Here's the slimrom gapps the AIO have gapps with some other things link:
http://www.slimroms.net/index.php/downloads/all/viewcategory/383-addons
Idk if your using cwm or twrp but make a backup then wipe:
Cache
Davlik cache
Data
System
Install ROM then slimrom gapps, then clear cache and davlik then reboot
Click to expand...
Click to collapse
Hi;
So i recently installed CyanogenMod 13.0 on to my Samsung S4 GT-I9505 using the first download link on:
https://download.cyanogenmod.org/?device=jfltexx --> cm-13.0-20160102-NIGHTLY-jfltexx.zip
That all installed fine, but i wanted to get the Google apps installed aswell, which is where i am having some issues.
I have been trying to install the following package:
http://opengapps.org/?api=6.0&variant=nano
but have also tried to install quite a few others as well, and all have exactly the same issue. Basically after the apps have been installed and i boot the device up, i get various error messages like:
unfortunately, Setup Wizard has stopped
unfortunately, google play services has stopped
Any help on fixing this would be much appreciated, as nothing seems to download from the play store thats included in Cyanogen, they just say "your download will begin shortly" but never does.
Thanks in advance
I am a total noob, but I had exactly this problem. The issue appears to be that you have to flash gapps *before* rebooting after flashing CM. In my case since I had already flashed CM before I flashed gapps I had to put the gapps file on the phone (I did this by push with adb, you might find an easier way), re-flash CM, wipe cache/dalvik, flash gapps, wipe cache/dalvik, reboot. It worked.
The easiest guide I found was on androiding.how, called "how to install cm13 (cyanogenmod13)." (The forum won't let me post a link, just google it, it should come up).
Hope that helps. I'm on a galaxy s5 and used twrp recovery if that matters.
audacityandrouge said:
I am a total noob, but I had exactly this problem. The issue appears to be that you have to flash gapps *before* rebooting after flashing CM. In my case since I had already flashed CM before I flashed gapps I had to put the gapps file on the phone (I did this by push with adb, you might find an easier way), re-flash CM, wipe cache/dalvik, flash gapps, wipe cache/dalvik, reboot. It worked.
The easiest guide I found was on androiding.how, called "how to install cm13 (cyanogenmod13)." (The forum won't let me post a link, just google it, it should come up).
Hope that helps. I'm on a galaxy s5 and used twrp recovery if that matters.
Click to expand...
Click to collapse
Thanks for the reply, i gave that a try and it seems to be stuck on a loop now with "installing app # of 22" . it completes the installation and then reboots, after about 5 minutes on the Cyanogen boot screen, it goes back to installing apps again.
Hm, did you do a factory reset in your recovery before re-flashing CM and gapps? If not, that might be necessary.
audacityandrouge said:
Hm, did you do a factory reset in your recovery before re-flashing CM and gapps? If not, that might be necessary.
Click to expand...
Click to collapse
Yeah, i did. Tried it multiple times now
That's about the limit of my ability right there, hopefully someone with more experience than me can point you in the right direction. Good luck.
Boot to recovery (preferably TWRP)
Wipe cache / dalvik cache / data / system
Flash CM13 and the gapps you were trying first
Reboot
Profit!
Since you keep flashing different gapps on top of the system, this is probably causing some issues. Once you fully wipe and reflash everything, it should work.
es0tericcha0s said:
Boot to recovery (preferably TWRP)
Wipe cache / dalvik cache / data / system
Flash CM13 and the gapps you were trying first
Reboot
Profit!
Since you keep flashing different gapps on top of the system, this is probably causing some issues. Once you fully wipe and reflash everything, it should work.
Click to expand...
Click to collapse
Ive tried that multiple times using twrp (i always wipe everything before i flash CM13 and gapps), i still get the exact same issue. The second the phone boots, i get all these "unfortunately ******** has stopped".
Perhaps try installing 12.1 with gapps, get it all updated then upgrade to 13. I did the accidental upgrade to 13 but have had no issues whatsoever.
Flash this recovery on the community build: http://forum.xda-developers.com/devdb/project/dl/?id=20236
And then flash the super SU file via recovery:
https://www.androidfilehost.com/?fid=24591000424944601
Let me know if this works or you need any help ?
Did any1 tried??
Sent from my ONE E1003 using XDA-Developers mobile app
From other posts in other topics it seams that it's the only twrp version that installs OOS 3.1.1
Sent from my ONE E1001
trendchanger said:
Did any1 tried??
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried, and I can confirm it worked.
The only thing is that I can't get xposed installer to work properly. When I install it (v86 sdk23 arm) , every time that I tap on recent apps button, system ui crashes, so, I flashes the Uninstaller zip, and everything went well. But I miss xposed, if anybody has a solution, I would appreciate it
yes this is working
Jab_ said:
I tried, and I can confirm it worked.
The only thing is that I can't get xposed installer to work properly. When I install it (v86 sdk23 arm) , every time that I tap on recent apps button, system ui crashes, so, I flashes the Uninstaller zip, and everything went well. But I miss xposed, if anybody has a solution, I would appreciate it
Click to expand...
Click to collapse
Using the latest Blu spark twrp from his thread I flashed v86 sdk23 arm.zip and didn't have any issues on 3.1.1.
Exodusche said:
Using the latest Blu spark twrp from his thread I flashed v86 sdk23 arm.zip and didn't have any issues on 3.1.1.
Click to expand...
Click to collapse
Maybe the problem is not xposed itself, maybe the issue is related to an specific module. I'll try one by one tomorrow and see what happens, thank you!
Just delete the . rar part. This one worked for me I think your right though maybe bad file.
Exodusche said:
Just delete the . rar part. This one worked for me I think your right though maybe bad file.
Click to expand...
Click to collapse
I know what the problem was. My xposed zip was correct. As I thought, it was because of a module. "Android N-fy", in recents, I just had to uncheck quick switch and change no recent image and that was it. I don't know if that module is optimized for this oos especific build, because in settings of the phone, the module does not change as much as in lollipop oos. Thank you tho
I have latest official TWRP rn on OOS 2.2.2.. Should I just flash(dirty flash or clean flash after wiping) it normally? or revert to stock, flash the ROM and then use fastboot to flash recovery by bluspark?
Worked fine. Thanks OP.
bootloop when flashed supersu zip on oos 3.1.1 with twrp v41 recovery
i just saw that you have to use modified zip , so no other file to flash
thanks and sorry for not reading properly
TarushS said:
bootloop when flashed supersu zip on oos 3.1.1 with twrp v41 recovery
i just saw that you have to use modified zip , so no other file to flash
thanks and sorry for not reading properly
Click to expand...
Click to collapse
Oh lol, glad this helped
StraightEdgeKid said:
Worked fine. Thanks OP.
Click to expand...
Click to collapse
Np?
Sachin7843 said:
I have latest official TWRP rn on OOS 2.2.2.. Should I just flash(dirty flash or clean flash after wiping) it normally? or revert to stock, flash the ROM and then use fastboot to flash recovery by bluspark?
Click to expand...
Click to collapse
What exactly are you looking to do?
marwan2704 said:
What exactly are you looking to do?
Click to expand...
Click to collapse
I want to get OOS 3.1.1 and also be able to revert back to OOS 2.2.2 if I experience any bugs or don't like it so, I want to know when should I flash TWRP by bluspark?
Sachin7843 said:
I want to get OOS 3.1.1 and also be able to revert back to OOS 2.2.2 if I experience any bugs or don't like it so, I want to know when should I flash TWRP by bluspark?
Click to expand...
Click to collapse
Make sure you have both .zip files on your phone, clean flash 3.1.1 then boot it up. If you don't like it, you can go back to 2.2.2 via stock recovery anytime. You don't even need twrp unless you want to root, install Xposed or backup.
might be a bit off-topic but...
i was coming from sultans cm13 build - flashed stock recovery - wiped system - installed the community build.
So far so good
System works fine, but wifi drains system like hell (37% usage)
So i installed bluespark twrp and wanted to wipe cache & dalvik/art at once
-> initially i got an error -> "can´t mount /cache - invalid argument" (or so) - tried only to wipe cache and then it worked on the 3rd attempt...
But - after restarting only 12 Apps are "optimized", altough i have 100+ apps installed.... so i expect some filesystem/partition issue
Did you ever have this behaviour ?
I´m thinking about to do a full wipe in twrp and reinstall the community build -> other suggestions ?
error23 said:
i was coming from sultans cm13 build - flashed stock recovery - wiped system - installed the community build.
So far so good
System works fine, but wifi drains system like hell (37% usage)
So i installed bluespark twrp and wanted to wipe cache & dalvik/art at once
-> initially i got an error -> "can´t mount /cache - invalid argument" (or so) - tried only to wipe cache and then it worked on the 3rd attempt...
But - after restarting only 12 Apps are "optimized", altough i have 100+ apps installed.... so i expect some filesystem/partition issue
Did you ever have this behaviour ?
I´m thinking about to do a full wipe in twrp and reinstall the community build -> other suggestions ?
Click to expand...
Click to collapse
Sounds like you forgot to wipe data. Wipe system, data, cache and just flash 3.1.1. As for wifi drain it's not real and happens when you have wifi scanning on under location. Turn it off, reset network settings under backup/reset. Now reboot and should be gone. Turning off and rebooting might be enough but doesn't hurt to add network reset. Next cycle after reboot and full charge should be clean.
Exodusche said:
As for wifi drain it's not real and happens when you have wifi scanning on under location. Turn it off, reset network settings under backup/reset. Now reboot and should be gone. Turning off and rebooting might be enough but doesn't hurt to add network reset. Next cycle after reboot and full charge should be clean.
Click to expand...
Click to collapse
It's not the place, but I can confirm that it didn't work for me. I still have the drain from time to time.
And if I don't have the Wifi drain I have a service Google Play service drain (33% for today's charge for example...).
And sometimes, I even had the wifi drain with Wifi completly switched off...