Related
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
Hi
I am new on the SGS2 though i have one Android Tablet.
I have been reading a lot and there is something i have not been able to find.
I want to root, , install CMW and install this custom ROM: Dynamic
http://forum.xda-developers.com/showthread.php?t=1582217
1.- Do i need to install first the CF-ROOT kernel matching my actual Firm to make the root or can i install the Siyah kernel at this will make the root anyway?
2.- If i install the CF-root using ODIN, do i need to install an specific kernel for that ROM? Or most kernels work with most rom?
Thanks.
I suggest you flashing the cf-root kernel with odin then you can install your custom rom from the modified recovery mode flashing the .zip file of the rom.
You can flash the siyah kernel after that, because generally custom roms mount a custom kernel which supports CWM (Clock Work Mod, the custom recovery).
If i helped u, press thanks.
if you are on ics you should be good flashing siyah but most of us here started with cf root
darkpollo said:
Hi
I am new on the SGS2 though i have one Android Tablet.
I have been reading a lot and there is something i have not been able to find.
I want to root, , install CMW and install this custom ROM: Dynamic
http://forum.xda-developers.com/showthread.php?t=1582217
1.- Do i need to install first the CF-ROOT kernel matching my actual Firm to make the root or can i install the Siyah kernel at this will make the root anyway?
2.- If i install the CF-root using ODIN, do i need to install an specific kernel for that ROM? Or most kernels work with most rom?
Thanks.
Click to expand...
Click to collapse
1/ follow the install notes stated for that rom also siyah kernel if flashed thru odin will give you root and install cwm/superuser
2/if you install cf root again follow install notes within that thread and it does say best to use same cf as your stock kernel or find one close to it to match
i prefer to use siyah less hassle but each to there own and everyone has there own choice
Thank you all.
I decided to go safe and try with CF-Root. Now i am rooted and i have installed the rom using the CWM.
Do you recommend to change the kernel again? I think that the rom has its own kernel but i am not sure.
Also something weird happen (little off topic), after wipe and reinstall the rom, i have some apps installed by default, some of them where on the old ROM.
I thought that all the apps will be deleted with the installation of the new rom.
Not sure how to fix it.
Thanks again
Apps will only be deleted by doing a full wipe in cwm. And you dont need to flash another kernel if you only want the root feature.. i think all the custom roms use a rooted kernel... some use cf-root, some siyah, some speedmod etc...
Well, i really prefer to use the features offered by other kernels. I was not sure if i can change the kernel keeping the Roms or if i need to reinstall everything afterwards.
How do i make a Full Wipe? most of the apps are bloatware and i do not want them.
Thanks
im also a noob and i use siyah without changing much
just OC to 1400 and choosing en demand for governor
darkpollo said:
Well, i really prefer to use the features offered by other kernels. I was not sure if i can change the kernel keeping the Roms or if i need to reinstall everything afterwards.
How do i make a Full Wipe? most of the apps are bloatware and i do not want them.
Thanks
Click to expand...
Click to collapse
You must go in the custom recovery and press "Data wipe/factory reset", so you wil have only the system apps, but you must start the phone configuration again.
U can flash another kernel if you want, there's no problem with the rom, but remember to do a dalvik wipe.
If youre thinking about to flash a new kernel, i would prefer to flash the kernel first (now) and then do a full wipe and dalvik wipe. Otherwise youre doing some work twice...
And if youre yet haveing some "bloatware" (e.g. from a provider branded firmware) after wipeing, you can delete them (be careful with system apps) with root explorer... (in "\system\app" folder....
darkpollo said:
Thank you all.
I decided to go safe and try with CF-Root. Now i am rooted and i have installed the rom using the CWM.
Do you recommend to change the kernel again? I think that the rom has its own kernel but i am not sure.
Also something weird happen (little off topic), after wipe and reinstall the rom, i have some apps installed by default, some of them where on the old ROM.
I thought that all the apps will be deleted with the installation of the new rom.
Not sure how to fix it.
Thanks again
Click to expand...
Click to collapse
If your happy with the results you get form using CF then by all means stay with it otherwise follow the thread in which your rom is based on users will often leave feedback on there selected kernels and setups like my signature for example check im sure theres users within your choosen thread with the same
I can advise using the kernel cleaning script after changing to another kernel. http://forum.xda-developers.com/showthread.php?t=1363738
This will prevent problems that left behind files from the old kernel can cause.
After flashing the file/script install the desired kernel
Thank you to everyone!
Ubbabubba said:
You must go in the custom recovery and press "Data wipe/factory reset", so you wil have only the system apps, but you must start the phone configuration again.
U can flash another kernel if you want, there's no problem with the rom, but remember to do a dalvik wipe.
Click to expand...
Click to collapse
I did the Data wipe/factory reset and everything as per the instructions:
*For a clean installation and no problem
- Download the ROM and put it on your S2.
- Go to Recovery
- Wipe data factory reset, wipe cache.
- In Advance: wipe dalvik cache and wipe battery stats.
- In mount and storage - format data , system and cache
- Install the zip file and you will get the CWM install completed message.
- Select Reboot Now and let the phone boot up to an Android setup screen.
- If there are Update, download it, put it on the phone, go to recovery and install it. Don't do wipes.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1582217
glowfinger said:
If youre thinking about to flash a new kernel, i would prefer to flash the kernel first (now) and then do a full wipe and dalvik wipe. Otherwise youre doing some work twice...
Click to expand...
Click to collapse
I think i am going to make it more than twice.
I will go to other kernel to try them. The battery on CF is not as good as i would like.
glowfinger said:
And if youre yet haveing some "bloatware" (e.g. from a provider branded firmware) after wipeing, you can delete them (be careful with system apps) with root explorer... (in "\system\app" folder....
Click to expand...
Click to collapse
That is the strange thing. I am not using any branded firmware, i came from one, but i thought everything was to be erased after the wipes and formats.
Spunkynitro said:
I can advise using the kernel cleaning script after changing to another kernel. http://forum.xda-developers.com/showthread.php?t=1363738
This will prevent problems that left behind files from the old kernel can cause.
After flashing the file/script install the desired kernel
Click to expand...
Click to collapse
I will use this on my next try this weekend.
If i do not understand wrong this is what i need to do:
Review the rom to find a kernel that suits it.
Use the kernel cleaning script
Install the new kernel.
Follow the instructions to flash the desired ROM with all the wipes and formats required.
Anything else?
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Jokesy said:
A.
If i get your question very well,
1. Your device can only boot if you restore your old ROM.
2. Anytime you flash a new ROM, you always end up in bootloops
Please correct me if i got something wrong.
B.
Please provide answers to these questions:
1. What's your ROM details? Press include your phone's model no (goto SETTINGS -About, post everything you see)
2. Was your device carrier branded?
3. Was your device SIMlocked?
4. Please post all the steps you normally take while flashing a new ROM
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Robotr0n said:
Alright Sir,
A
1. Correct
2. Correct
B
1. GT-I9100, 4.0.4, I9100XXLPX
Kernel:
3.0.32-FLUXI-XX.01-RC5.2+
[email protected])) 1SMP PREEMPT Sun May 27 14:22:38 CEST 2012
Build No.
IMM76I
Mod version
RebelAOKP-1.3-ICS20120531-SGS2
2. No
3. No
4. It depends on ROM which I want flash. I always follow all the steps on installation info, but generally I always do full wipe, wipe dalvik & cache, install ROM, optionally gapps, then again wipe cache & dalvik, fix permissions and then reboot.
Click to expand...
Click to collapse
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Jokesy said:
Do you have any ROM you want to flash now? If yes, please tell me the name of the Rom so that i can provide you with my own flashing instruction
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Robotr0n said:
Yes, in my phone I have latest version of:
ParanoidAndroid 1.992,
Ressurection ROM V3.0.6
SlimBean Rom
(prefer ParanoidAndroid)
Click to expand...
Click to collapse
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Jokesy said:
Ok. I'm using paranoid too.
- boot to CWM recovery
- If you don't have a backup, please do it now
- wipe data/factory reset
- wipe dalvik cache
- flash paranoid ROM
- Reboot recovery (under Advanced)
- wipe data/factory reset
- format /system (under mount and storage)
- wipe dalvik cache
- flash ROM
- flash gapps (gapps 4.1)
- fix permissions
- reboot phone
All should be fine now.
Note: this is not a standard flashing method. I only tried as much as possible to remove possibility of another round of bootloops.
-
-
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
if the above doesn't work try flashing stock from download mode - ODIN
Robotr0n said:
Can anyone help me please ?
If I try to flash any ROM (Tried to install paranoindandroid, Ressurection Rom, Slim Rom) I get stucked in endless bootloop. From time to time the phone boots ROM, but only thing that happens is that I see "Enter your PIN code" for like 1-2 secs and then phone restarts and bootloop continues. Fortunately, I have Nandroid backup of my previous ROM which is old like hell (It´s RebelAOKP 1.3 ROM) so I can download other ROMs from xda. I tried full wipe, flashing other kernels, flashing ROM several times, fixing permissions and I don´t know, everything what is in CWM.
I´m so frustrated, whole day I´m searching for solution but I can´t find anything helpfull so I hope that someone will help me. Please be good to me I´m little bit noob but flashed lot of ROMs and this happens to me for first time. I will appreciate every response.
THX for your help.
Click to expand...
Click to collapse
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Robotr0n said:
Thanks a lot but unfortunately, this did not help me. Stucked in bootloops again. :-/
Click to expand...
Click to collapse
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
serialteg said:
if the above doesn't work try flashing stock from download mode - ODIN
Click to expand...
Click to collapse
Thanks. I´ll try that.
Lushstep said:
I don't know if this will help but yeah.
http://forum.xda-developers.com/showthread.php?t=1108499
Click to expand...
Click to collapse
Also thanks, I was afraid of this, everytime when I´m flashing via ODIN I have bad feelings.
Jokesy said:
Something must have gone wrong somewhere. This shouldn't happen, normally.
Restore your backup. Sorry about that.
Can you confirm if the MD5 sum of the zips corresponds with the ones provided by the Rom developers?
Swyped from my Galaxy SII
Click to expand...
Click to collapse
Yes MD5 sums match and they are allright, I downloaded all of them today from official repositories. Also thanks for helping
I´m goind off to bed, long day full of flashing and bootlooping Thank you all guys. :good:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Robotr0n said:
But guys, if I flash stock ROM via ODIN how this will help me ? I will be able to install newest ROMs properly ? It will remove my problem ? I´m so confused...
Click to expand...
Click to collapse
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Jokesy said:
Yeah. Going back to stock and starting afresh should solve this issue.
Download a 4.0.3 ICS firmware, to make things safer and faster
Swyped from my Galaxy SII
Click to expand...
Click to collapse
OK, I´m going to try it now.
Robotr0n said:
OK, I´m going to try it now.
Click to expand...
Click to collapse
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Jokesy said:
Perform a factory data reset in recovery before flashing via Odin
Swyped from my Galaxy SII
Click to expand...
Click to collapse
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Robotr0n said:
I flashed stock ROM XWLPE then CF Root, then i flashed ParaAndroid ROM and guess what ?
reboot
reboot
reboot
So then I formated everything: emmc, system, etc., again flashing stock rom, CF root (completely clear phone) flashed ROM again and its still bootlooping... I really dont know what to do.
Click to expand...
Click to collapse
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
*boy*racer* said:
Can you not provide a logcat?
Sent from my Galaxy S2 running JellyBean
Click to expand...
Click to collapse
I don´t know how to get these logcats.
Jokesy said:
i believe something is either wrong with the zip files you downloaded, or something else.
You shouldn't be facing all these
Swyped from my Galaxy SII
---------- Post added at 06:54 AM ---------- Previous post was at 06:27 AM ----------
Ok.
Any other time you face bootloops, Try this:
- flash Siyah kernel (4.x.x zip) via CWM recovery
-reboot phone
Swyped from my Galaxy SII
Click to expand...
Click to collapse
You really think that all these files which I downloaded are damages ? Uhm I don´t know but I don´t think so.
I tried this with Siyah kernel once and nothing happend. But I´ll give it a try again.
EDIT:
OH, God. I tried different stock ROM and even the new stock ROM wont boot... after i restart mobile, I´m in factory mode :-/
How to do a logcat
Ok so this is what i do.
. Download attachment and extract anywhere
.Open up Platform-tools folder and hold Shift+right click on an empty space within the folder.
.Click on "Open command window here"
.In the command window, type "adb logcat"
.Plug in device & turn it on
.It should do a logcat
leave it for about 1 min then disconnect device. Right click the logcat and select mark then highlight all and right click again. go to pastebin.com or something like that then paste it and save and give us the link.
hope this helps
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686