So I was trying to go back to stock. I went to Odin, used the atlas file, clicked the partition box and stuck in the appropriate file with the .md5 i the phone portion . It was successful, I then tried to flash the CWM4 in odin and that said successful. When i went into it thru recovery it gave me a lot of errors, so I tried to redo the whole process and now im screwed.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
Is the message I get. Any suggestions?
When I boot the phone, it just stays on the Samsung screen.
Thanks for your help. I really appreciate it. :good:
I think i saved the phone. I still need help with installing the new Jelly Bean. Mods you cant delete this thread, crisis averted.
abcs1 said:
I think i saved the phone. I still need help with installing the new Jelly Bean. Mods you cant delete this thread, crisis averted.
Click to expand...
Click to collapse
So u need help with getting to jb? Or u don't need help? I'm on jb on my mesmerize so I can point u the way....
Bacon in my coffee, please? You don't have bacon?! Unacceptable!!
I ended up working it out. Was worried for a minute. Thanks for looking out for me though.:good:
abcs1 said:
I ended up working it out. Was worried for a minute. Thanks for looking out for me though.:good:
Click to expand...
Click to collapse
No problem. Need any help with ur phone let me know, I've done quiet a bit of work (screwing around) with my mesmerize, and its almost identical to the fascinate. I'm running fascinate ROMs on my mesmerize even.
Bacon in my coffee, please? You don't have bacon?! Unacceptable!!
Related
Phone is 'bricked', and gets stuck on Samsung logo. How do I fix this? I'm trying to follow threads on how to get back to stock, but most of the links are dead - so if anyone can help, that would be great! When following some guides, I get the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!
Click to expand...
Click to collapse
lolreconlol said:
Phone is 'bricked', and gets stuck on Samsung logo. How do I fix this? I'm trying to follow threads on how to get back to stock, but most of the links are dead - so if anyone can help, that would be great! When following some guides, I get the following error:
Click to expand...
Click to collapse
If you're coming from ICS or CM7, you need pit file for re-partition.
jhssal said:
If you're coming from ICS or CM7, you need pit file for re-partition.
Click to expand...
Click to collapse
Ah! Thanks, worked that time.
I know several of you guys will be loling at me here...
Everything was working fine until I tried to flash Siyah Siyah 4.1.5. I went into normal recovery mode (Not using Rom Manager) and used a kernel cleaning script then flashed the zip for Siyah. Rebooted and couldn't get past the AOKP loading screen. I tried using I777UCKH7 OCD With Root.exe but it wouldn't work. Everything else I've tried to flash has failed.
After doing some research I found out that my bootloaders may have been messed up with some previous crap I did. I can only get into download mode and it states Product Name: GT-i9100.
I tried to flash the I777UCKH7-CL503881-Full.exe but every attempt gets stuck on <ID:0/003> Sbl.bin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
I tried using Odin 1.85 and I777UCKH7-REV02-home-low-CL503881.tar.md5 but still the same issue. Can't get past Sbl.bin.
I read in another post that I should flash the param.lfs file first and then use I777UCKH7-CL503881-Full but that doesn't work either. I just get stuck again.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
Ah you have I9100 bootloaders, when the hell did you manage to do that?
Sent from Team Pirate! Using Tapatalk 2
First thing I would try, go to the Download Repository and flash the sbl.bin only. If successful, then try the stock again. You may or may not need to flash the param.lfs separately as well.
AngelsNecropolis said:
I know several of you guys will be loling at me here...
Everything was working fine until I tried to flash Siyah Siyah 4.1.5. I went into normal recovery mode (Not using Rom Manager) and used a kernel cleaning script then flashed the zip for Siyah. Rebooted and couldn't get past the AOKP loading screen. I tried using I777UCKH7 OCD With Root.exe but it wouldn't work. Everything else I've tried to flash has failed.
After doing some research I found out that my bootloaders may have been messed up with some previous crap I did. I can only get into download mode and it states Product Name: GT-i9100.
I tried to flash the I777UCKH7-CL503881-Full.exe but every attempt gets stuck on <ID:0/003> Sbl.bin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCKH7-REV02-home-low-CL503881.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
I tried using Odin 1.85 and I777UCKH7-REV02-home-low-CL503881.tar.md5 but still the same issue. Can't get past Sbl.bin.
I read in another post that I should flash the param.lfs file first and then use I777UCKH7-CL503881-Full but that doesn't work either. I just get stuck again.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
Click to expand...
Click to collapse
I'm sorry, I really am laughing here :laugh:
jthatch12 said:
I'm sorry, I really am laughing here :laugh:
Click to expand...
Click to collapse
Do you need help?
Did you try flashing the sbl.bin?
creepyncrawly said:
First thing I would try, go to the Download Repository and flash the sbl.bin only. If successful, then try the stock again. You may or may not need to flash the param.lfs separately as well.
Click to expand...
Click to collapse
I did try flashing the sbl.bin only and Odin only gets stuck and doesn't proceed just like the previous attempts.
Nick281051 said:
Ah you have I9100 bootloaders, when the hell did you manage to do that?
Sent from Team Pirate! Using Tapatalk 2
Click to expand...
Click to collapse
I'm not entirely sure when this happened. Not recently at least.
I also went to Sammobile and downloaded the "Firmwares for SGH-I777 - USA (AT&T)" I777UCLE5 but it gets stuck.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCLE5_I777ATTLE5_I777UCLE5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
Oh gawd... after the sammobile firmware failed I tried to use the I777UCKH7-REV02-home-low-CL503881.tar.md5 again and Odin finally completed something. Now I'm stuck in a boot loop but can at least boot. I'll try download mode again and see if the unbrick files will work this time.
OK. My phone rebooted successfully... crisis over. lol
I lol'd.
Glad you got it sorted... No more ROM manager for you!
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
Yeah... I'm on my GS3 now that I just got today. Rooted already so I'm preparing for those roms now. My gs2 will hopefully run without any hiccups for my gf. I appreciate all the support everyone provides here. =)
Sent from my Galaxy S II running AOKP Jellybean
Yes.
Sent from my SGH-I777 using Tapatalk 2
Wow.... Rom manager is cool...
Sent from my SAMSUNG-SGH-I897 using xda premium
Not sure which CWM I was coming from, but I wanted to go back to stock. Here is what I did:
C:\Users\Brian\Downloads\Cell Phone\CI500_VZW_EH03_GB_CM.tar.md5
C:\Users\Brian\Downloads\Cell Phone\atlas_v2.2.pit
I select the partition box and got this error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help. I dont know what else to do. Thanks so much.
I literally have tried everything. Not sure if the .tar is incorrect, or what is happening. Phone wont turn on though, its stuck on the samsung logo boot.
Have you:
Tried a different usb cable (or several)?
Tried a different usb port?
Tried a different OS?
Tried a different version of Odin?
Tried redownloading the files?
Tried stock 2.2 Froyo instead?
Looks like it was the USB cable. Damn i spent like 2 hours researching and trying everything . Thanks for the response bro. Have a good one.
No problem, it's always the last thing you think of. Glad you got it though
Hello, I'd be grateful for some assistance. This morning my s3 was in my pocket and felt really warm. I pulled it out and it was stuck on the boot logo. I'm assuming it had been on that for a while which is why it heated up.
Now, the phone doesn't boot up. I can get into download mode but not recovery.
I did have the Siyah Kernel installed as well as a JB rom.
I have downloaded the latest firmware image for my region UK - (I9300XXEMB5_I9300OXAEMB5_BTU) and tried installing but have had no luck. Below is the message I get. Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMB5_I9300OXAEMB5_996085_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
miahmad said:
Hello, I'd be grateful for some assistance. This morning my s3 was in my pocket and felt really warm. I pulled it out and it was stuck on the boot logo. I'm assuming it had been on that for a while which is why it heated up.
Now, the phone doesn't boot up. I can get into download mode but not recovery.
I did have the Siyah Kernel installed as well as a JB rom.
I have downloaded the latest firmware image for my region UK - (I9300XXEMB5_I9300OXAEMB5_BTU) and tried installing but have had no luck. Below is the message I get. Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMB5_I9300OXAEMB5_996085_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you tried with another usb port and are you using stock samsung usb cable?
Your partition structure of the internal storage card is corrupt, the phone is soft bricked. You can usually format and recover if you have backups, particularly of the efs folder.
If you don't then there are a few solutions here on the forum you can try, otherwise it's a Samsung repair.
boomboomer said:
Your partition structure of the internal storage card is corrupt, the phone is soft bricked. You can usually format and recover if you have backups, particularly of the efs folder.
If you don't then there are a few solutions here on the forum you can try, otherwise it's a Samsung repair.
Click to expand...
Click to collapse
Hello, thanks for your reply. I don't have a backup. Would you please point me in the right direction? I'm not sure what I need to do?? where would I get the recovery??(Is that the bootloader?Kernel?Rom?)
Search and read here in Q&A, without a backup of your efs it is less likely to succeed. Otherwise return to Samsung for repair.
boomboomer said:
Search and read here in Q&A, without a backup of your efs it is less likely to succeed. Otherwise return to Samsung for repair.
Click to expand...
Click to collapse
From what I can make out I need to reformat the internal storage. To do this I need the correct pit file. I can't find it on samfirmware.com.
miahmad said:
From what I can make out I need to reformat the internal storage. To do this I need the correct pit file. I can't find it on samfirmware.com.
Click to expand...
Click to collapse
i dont know if this will work ... but try the resurrection rom!
I can't bet into recovery.installing from Odin also gives error.
flash the correct pit file, use search, it's been posted
Glebun said:
flash the correct pit file, use search, it's been posted
Click to expand...
Click to collapse
I have attached the Pit file I have used. No luck. It does nothing, I have left it for ages.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Service centre then but their is a big queue judged by todays bricked phone posts .
jje
Hello everyone,
I have installed Resurrection Remix (Resurrection_Remix_KK_v5.1.5-20140609-i9100) and suddenly my phone turned off and stucked at the boot logo.
I can't start the recovery mode only the download mode is possible.
I have tried to reflash the recovery but it doesn't work. I have tried different cables and PCs without any success. I also tried different odin versions.
I think I have a NAND rw issue.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSD-OXX-4.93.6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
I have read different threads about stucked phones, but I am unsure which recovery package would be the right one, f.e. http://forum.xda-developers.com/galaxy-s2/development/guide-fix-unflashable-soft-bricked-t1619571
I just want to save as much as possible.
Every help is appreciated.
h3llghost said:
Hello everyone,
I have installed Resurrection Remix (Resurrection_Remix_KK_v5.1.5-20140609-i9100) and suddenly my phone turned off and stucked at the boot logo.
I can't start the recovery mode only the download mode is possible.
I have tried to reflash the recovery but it doesn't work. I have tried different cables and PCs without any success. I also tried different odin versions.
I think I have a NAND rw issue.
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XWLSD-OXX-4.93.6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
I have read different threads about stucked phones, but I am unsure which recovery package would be the right one, f.e. http://forum.xda-developers.com/galaxy-s2/development/guide-fix-unflashable-soft-bricked-t1619571
I just want to save as much as possible.
Every help is appreciated.
Click to expand...
Click to collapse
Do you installed Samsung drivers firstly? If no, download this and install. Restart PC.
If yes,
Download this kernel (Apollo kernel with TWRP) and flash it! after, you can install what ROM do you want! If you want KK install CM11-M12.
Hit Thanks button if I helped you!
IonutGherman said:
Do you installed Samsung drivers firstly? If no, download this and install. Restart PC.
If yes,
Download this kernel (Apollo kernel with TWRP) and flash it! after, you can install what ROM do you want! If you want KK install CM11-M12.
Hit Thanks button if I helped you!
Click to expand...
Click to collapse
Same odin output as before.
h3llghost said:
Same odin output as before.
Click to expand...
Click to collapse
What version of ODIN do you use?
I have tried 1.8.3, 3.1.6 and the latest one.
try this: http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
IonutGherman said:
try this: http://forum.xda-developers.com/galaxy-s2/help/guide-fix-unflashable-soft-bricked-gsii-t1457458
Click to expand...
Click to collapse
I have two issues with that, which package should I choose and the downloads are not available for Germany. Is there another mirror?