Phone is 'bricked', and gets stuck on Samsung logo. How do I fix this? I'm trying to follow threads on how to get back to stock, but most of the links are dead - so if anyone can help, that would be great! When following some guides, I get the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!
Click to expand...
Click to collapse
lolreconlol said:
Phone is 'bricked', and gets stuck on Samsung logo. How do I fix this? I'm trying to follow threads on how to get back to stock, but most of the links are dead - so if anyone can help, that would be great! When following some guides, I get the following error:
Click to expand...
Click to collapse
If you're coming from ICS or CM7, you need pit file for re-partition.
jhssal said:
If you're coming from ICS or CM7, you need pit file for re-partition.
Click to expand...
Click to collapse
Ah! Thanks, worked that time.
Related
My phone will no longer start up, it stays black, no loading whatsoever. I can no longer access my recover mode, but can still get to my download mode. No matter what I do, I can't load a stock ROM back on the phone.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched threads for things I can do, and have come up empty. I don't know what I should be focusing on first to get my phone back to an operable state.
My PPA is I9100MUGMA5
this is the rom I tried to put back I9100MUGMA5_I9100OYCMA5_I9100MUGMA5_HOME.tar.md5
I am at a complete dead end, if someone has any suggestions please help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XXLSJ-OXX-3.5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> zImage
I have since tried using the pit file and installing Philz, but it seems to be just hanging at the zImage.
funkdrshads said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PhilZ-cwm6-XXLSJ-OXX-3.5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> zImage
I have since tried using the pit file and installing Philz, but it seems to be just hanging at the zImage.
Click to expand...
Click to collapse
Let try to run your Odin as Adminstrator if you use Win 7 or Win 8
Hoper8's 'Odin troubleshooting' thread. Search for it, try the stuff in the thread.
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Jet5195 said:
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Click to expand...
Click to collapse
I went through this last month and check these things:
- Try a different USB cord
- Try a different USB port
- Disable your antivirus
- May have to reboot your computer
When I softbricked a few weeks ago I went through this process for the first time, and I found I had to keep trying over and over but it finally ended up working.
Remember to unlock your bootloader after this process - which I did not and had to redo everything after rooting and flashing and getting the Verizon discovered unauthorized software etc.
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Jet5195 said:
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Click to expand...
Click to collapse
Did you try looking through the top stickied post about how to recover from a soft brick? I would go there and see if the info helps and post there. I do think it is strange about the product name but there's got to be a fix so keep on...
Hi, I'm trying to restore my phone to stock using ODIN.
I have Odin 3.09 and have the latest Scamsung Kies installed (for the usb driver).
The file I am flashing is: http://www.androidfilehost.com/?fid=23203820527944861
The message log I get from Odin is:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not really sure what I'm doing wrong. My phone was on the ME7 version (And running a SafeStrap rom) before I wanted to restore it today.
xMopx said:
Hi, I'm trying to restore my phone to stock using ODIN.
I have Odin 3.09 and have the latest Scamsung Kies installed (for the usb driver).
The file I am flashing is: http://www.androidfilehost.com/?fid=23203820527944861
The message log I get from Odin is:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not really sure what I'm doing wrong. My phone was on the ME7 version (And running a SafeStrap rom) before I wanted to restore it today.
Click to expand...
Click to collapse
You can't flash backwards. Flash me7.
gnubian said:
You can't flash backwards. Flash me7.
Click to expand...
Click to collapse
That makes sense, I wasn't aware that I was using an older firmware file. I'm having trouble finding the ME7 file, could you point me to a copy? Thanks!
xMopx said:
That makes sense, I wasn't aware that I was using an older firmware file. I'm having trouble finding the ME7 file, could you point me to a copy? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2357235
That will wipe everything, so make sure to back up your files if you haven't already. Good luck!
gnubian said:
http://forum.xda-developers.com/showthread.php?t=2357235
That will wipe everything, so make sure to back up your files if you haven't already. Good luck!
Click to expand...
Click to collapse
Thanks! But with that file I got this error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Which from what I could find, meant I needed to repartition. So I grabbed the Pit file in this thread: http://forum.xda-developers.com/showthread.php?t=2290859
But got this:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Edit: I did have Safestrap recovery installed - do I need to flash a stock recovery or is it contained in that firmware file?
xMopx said:
Thanks! But with that file I got this error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Which from what I could find, meant I needed to repartition. So I grabbed the Pit file in this thread: http://forum.xda-developers.com/showthread.php?t=2290859
But got this:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Edit: I did have Safestrap recovery installed - do I need to flash a stock recovery or is it contained in that firmware file?
Click to expand...
Click to collapse
Just go to the safestrap app in app drawer on stock slot and uninstall it.
gnubian said:
Just go to the safestrap app in app drawer on stock slot and uninstall it.
Click to expand...
Click to collapse
I can't do that anymore, a result of these failed flashes is that I can't boot the system currently.
xMopx said:
I can't do that anymore, a result of these failed flashes is that I can't boot the system currently.
Click to expand...
Click to collapse
What happens when you start the phone?
gnubian said:
What happens when you start the phone?
Click to expand...
Click to collapse
It says:
FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I tried using the Kies recovery, but it doesn't detect that the phone needs recovering (both on that screen and the download screen used for odin).
xMopx said:
It says:
FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I tried using the Kies recovery, but it doesn't detect that the phone needs recovering (both on that screen and the download screen used for odin).
Click to expand...
Click to collapse
Are you positive you were on me7 and not mj7? Because the error you got for me7 looks the same as the one for mdk...
gnubian said:
Are you positive you were on me7 and not mj7? Because the error you got for me7 looks the same as the one for mdk...
Click to expand...
Click to collapse
Positive. I had installed the rom/recovery before anything newer than me7 was released. And I remember when I upgraded from whatever it shipped with to ME7 because the upgrade window popped up and I tapped Install by accident. I had this installed: http://forum.xda-developers.com/showthread.php?t=2351840.
Edit: to confirm, I found my old post asking about the modules to get that rom to work on ME7: http://forum.xda-developers.com/showthread.php?p=46944438
Was waiting for someone else to chime in who may know more than me. Have you tried booting into recovery from being powered off?
gnubian said:
Was waiting for someone else to chime in who may know more than me. Have you tried booting into recovery from being powered off?
Click to expand...
Click to collapse
No problem, but yeah. After every failure I would battery-pull and go back into recovery.
Edit: Tried a different USB cable and a different computer today. No dice
xMopx said:
No problem, but yeah. After every failure I would battery-pull and go back into recovery.
Edit: Tried a different USB cable and a different computer today. No dice
Click to expand...
Click to collapse
So when you went to recovery it went to stock recovery I'm assuming? Or you got the error?
If it went to stock recovery did you try wiping everything before flashing in odin?
gnubian said:
So when you went to recovery it went to stock recovery I'm assuming? Or you got the error?
If it went to stock recovery did you try wiping everything before flashing in odin?
Click to expand...
Click to collapse
Err sorry, I meant download mode (Power+Voldown). If I try booting into recovery, I get the dead android: http://i.imgur.com/HRWVsvZ.jpg
xMopx said:
Err sorry, I meant download mode (Power+Voldown). If I try booting into recovery, I get the dead android: http://i.imgur.com/HRWVsvZ.jpg
Click to expand...
Click to collapse
Try finding a stock recovery tar for your build and just flashing that in odin.
gnubian said:
Try finding a stock recovery tar for your build and just flashing that in odin.
Click to expand...
Click to collapse
I had the thought of doing this, but wasn't able to find one.
xMopx said:
I had the thought of doing this, but wasn't able to find one.
Click to expand...
Click to collapse
I looked around a little and didn't fine one either. I'd try making a request thread, I'm sure someone knows how to make a tar of it you can use in odin.
gnubian said:
I looked around a little and didn't fine one either. I'd try making a request thread, I'm sure someone knows how to make a tar of it you can use in odin.
Click to expand...
Click to collapse
Isn't the recovery contained in the larger firmware files? What gain would flashing the stock recovery get?
I'm thinking I might just take the phone to a Verizon store and say, "Samsung kies told me it was going to update my phone, I took a shower and when I came back it was like this".
Edit: I untarred the firmware file, and it contained recovery.img. Can I flash that with odin?
xMopx said:
Isn't the recovery contained in the larger firmware files? What gain would flashing the stock recovery get?
I'm thinking I might just take the phone to a Verizon store and say, "Samsung kies told me it was going to update my phone, I took a shower and when I came back it was like this".
Edit: I untarred the firmware file, and it contained recovery.img. Can I flash that with odin?
Click to expand...
Click to collapse
I believe it has to be a tar. If you can get it on there and wipe data/factory reset it may get rid of safestrap and allow you to odin the full stock tar.
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
t-mobile_mda said:
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
Click to expand...
Click to collapse
yes downgraded..
first flash with this;
MK2_system_4downgrade
then flash,
MK2VZW-downgrade4rooting-AIOdin-gogolie
Bricked S4 SCH-I545
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
treaklet said:
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
ODIN Mode.
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
Odin Mode
Hey all,
My sch-i545 is stuck in download mode, cannot boot. I want to delete everything and start over.
I downloaded the stock 5.0.1 rom, which what i believe was on it before it soft bricked, and every time I try to run odin with the md5 the program becomes unresponsive. Any ideas???
Download this one. It's official stock:
ODIN v3.10:
https://drive.google.com/file/d/0B4RU_ZH5QUASNmxLX3JpejBXREE/view?usp=docslist_api
OC1 image:
https://drive.google.com/file/d/0B4RU_ZH5QUASaU9LcDJ3WWZfdXM/view?usp=docslist_api
Sent from my SCH-I545 using Tapatalk
Thank you for the file. so this time it does not crash odin, but now it says complete write operation failed.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUGOC1_I545VZWGOC1_CL4584173_QB4517016_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Try to use 3.09. It's the only one that worked for me.
Odin 3.0.9 seems to work better, but it fails at a certain point per below.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUGOC1_I545VZWGOC1_CL4584173_QB4517016_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Any thoughts? :-\
You'll want to flash the first link in this one:
http://forum.xda-developers.com/gal...pment/odin-i545vrugoc1-factory-image-t3160125
What you are trying to flash is a ROM someone put together I believe. It's not the exact factory image and is probably not wiping all the bad files.
Thank you for the help so far, but I still have the same problem with writing. It fails after about 7 minutes.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUGOC1_I545VZWGOC1_I545VRUGOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Any ideas? :-\
Download the PIT file and flash that along with the ROM
Sent from my draconis using Tapatalk
I have a pit file from December 2013, the only one I could find. Still have no luck getting it to flash when using that PIT
Any ideas?
Nanometer45 said:
Any ideas?
Click to expand...
Click to collapse
Are you using the stock USB cable you know the Samsung one?
I tried 3 different cables. the one that worked? The USB cable I just got for my S6. Thanks for your help!