Not sure which CWM I was coming from, but I wanted to go back to stock. Here is what I did:
C:\Users\Brian\Downloads\Cell Phone\CI500_VZW_EH03_GB_CM.tar.md5
C:\Users\Brian\Downloads\Cell Phone\atlas_v2.2.pit
I select the partition box and got this error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help. I dont know what else to do. Thanks so much.
I literally have tried everything. Not sure if the .tar is incorrect, or what is happening. Phone wont turn on though, its stuck on the samsung logo boot.
Have you:
Tried a different usb cable (or several)?
Tried a different usb port?
Tried a different OS?
Tried a different version of Odin?
Tried redownloading the files?
Tried stock 2.2 Froyo instead?
Looks like it was the USB cable. Damn i spent like 2 hours researching and trying everything . Thanks for the response bro. Have a good one.
No problem, it's always the last thing you think of. Glad you got it though
Related
Hi,
I have a Verizon Samsung Galaxy Note II, (SCH-1605), and I have apparently soft-bricked / boot-looped my device.
I followed droidstyle's tutorial titled, "[GUIDE][VZW Edition]How to Root/Rom/Return to Stock the VZW Galaxy Note II!."
Installed Odin on my Win8 x64 desktop
Downloaded the proper pit and tar files from his tutorial
ran odin from the "downloading" screen
How can i fix my phone and/or reset it to factory condition?
What may have caused my phone to boot-loop?
P.S. (I still wish to root the phone and try some custom roms once it is operational)
try flashing root66 with no pit file.
Thank you for your response.
I tried flashing with "rooot66_VZW_stock_system.tar.md5," in both bootloader and PDA slots in Odin3 v1.85.
I ran at least one attempt of both with and without the pit file. The yellow highlighting is present.
The phone still seems to be in a boot-loop. Could it be that I'm using the wrong Samsung Drivers on my PC? They were plug-and-play as far as I could tell. I did run the OTA updates before I knew they had something to do with locking down the bootloader.
Below I will paste the various Odin logs...
Root66 in PDA w/ Pit file
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
--
Root66 in PDA w/o Pit file
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
--
Root66 in BOOTLOADER w/ PIT file
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
--
Root66 in BOOTLOADER w/o PIT file
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
--
Ok what you need to do is reflash root66 in pda with pit, power the device off, press and hold the volume up/home/power buttons and boot into recovery, then wipe data/factory reset, and reboot.
---------- Post added at 10:07 AM ---------- Previous post was at 10:05 AM ----------
and dont flash anything in bootloader...simply trying random techniques is a good way to turn your device into a paper weight.
taylorp0994 said:
Hi,
I have a Verizon Samsung Galaxy Note II, (SCH-1605), and I have apparently soft-bricked / boot-looped my device.
I followed droidstyle's tutorial titled, "[GUIDE][VZW Edition]How to Root/Rom/Return to Stock the VZW Galaxy Note II!."
Installed Odin on my Win8 x64 desktop
Downloaded the proper pit and tar files from his tutorial
ran odin from the "downloading" screen
How can i fix my phone and/or reset it to factory condition?
What may have caused my phone to boot-loop?
P.S. (I still wish to root the phone and try some custom roms once it is operational)
Click to expand...
Click to collapse
After flashing with Odin you must do a factory reset.
I also had this on my Galaxy S2 Plus.
Sent from my GT-I9105P using xda app-developers app
droidstyle said:
Ok what you need to do is reflash root66 in pda with pit, power the device off, press and hold the volume up/home/power buttons and boot into recovery, then wipe data/factory reset, and reboot.
---------- Post added at 10:07 AM ---------- Previous post was at 10:05 AM ----------
and dont flash anything in bootloader...simply trying random techniques is a good way to turn your device into a paper weight.
Click to expand...
Click to collapse
Thank you. I was previously unaware of the power/home/vol.up combination for factory reset. I re-flashed root66 in PDA w/ the PIT file, however this time it went to the android with a neutron-like animation inside signifying updates. It worked w/o running a reset, but I ran one anyways to ensure I know how it works.
Again, thank you for your support.
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Jet5195 said:
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Click to expand...
Click to collapse
I went through this last month and check these things:
- Try a different USB cord
- Try a different USB port
- Disable your antivirus
- May have to reboot your computer
When I softbricked a few weeks ago I went through this process for the first time, and I found I had to keep trying over and over but it finally ended up working.
Remember to unlock your bootloader after this process - which I did not and had to redo everything after rooting and flashing and getting the Verizon discovered unauthorized software etc.
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Jet5195 said:
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Click to expand...
Click to collapse
Did you try looking through the top stickied post about how to recover from a soft brick? I would go there and see if the info helps and post there. I do think it is strange about the product name but there's got to be a fix so keep on...
I NEED SOME HELP
I bought a new note 2 from amazon but for some reason it came modified so i tried to flash a stock rom.
The first flash failed but now the phone is soft bricked
I cant get into recovery mode but i can get into download mode
I've downloaded at least 3 different stock note 2 roms and each time i try i get nand write start operation failed
ive tried different usb cables and computers and different versions of odin all with no luck
Some help asap would be great as im getting desperate.
Im using a Samsung Galaxy note 2 Unlocked SGH-1317
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100UBUFNE2_N7100UUBFNE2_N7100UBUFNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
warriorpanda said:
I NEED SOME HELP
I bought a new note 2 from amazon but for some reason it came modified so i tried to flash a stock rom.
The first flash failed but now the phone is soft bricked
I cant get into recovery mode but i can get into download mode
I've downloaded at least 3 different stock note 2 roms and each time i try i get nand write start operation failed
ive tried different usb cables and computers and different versions of odin all with no luck
Some help asap would be great as im getting desperate.
Im using a Samsung Galaxy note 2 Unlocked SGH-1317
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100UBUFNE2_N7100UUBFNE2_N7100UBUFNE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I would recommend taking a look at this thread that should help you solve your problem http://forum.xda-developers.com/showthread.php?t=2851096
I've followed the super easy instructions on how to use CF Auto Root but still cannot make it all the way through the first part of the root process. It starts running fine and then stops at NAND Write Start. At one point it got past that but failed at again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Earlier it said something about the PIT partition, but I can't seem to find a 32GB pit file for the Sprint S5 - and it's not saying that any more. I am kind of at a loss here, and now my phone won't boot at all. What else can I do?
Thanks!
Try a different computer, seriously man. I had the same issue. Had to use my dinosaur Windows XP Setup for it to work.
Hi All,
I was playing with this PARTITION i777. then stuck at step #7. After a few times to repeat steps 1-7 again in order to move to step #8, now my i777 is saying " Firmware upgrade encoutered as issue. Please select recovery mode in kies & try again." whenever I plug the USB cable in.
Tried Kies, it keeps saying "connecting..."
Tried to flash original one (I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5, as step 1) in ODIN 3.09, I got the "FAIL" I tried 3 times I got "FAIL" 3 times although I got many "SUCCESS" at the same PC & USB cable.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please give me some ideals how to get over this. Thanks.
SOLVED
The issue is resolved by flashing I777 UCKH7 PIT.