Hi All,
I was playing with this PARTITION i777. then stuck at step #7. After a few times to repeat steps 1-7 again in order to move to step #8, now my i777 is saying " Firmware upgrade encoutered as issue. Please select recovery mode in kies & try again." whenever I plug the USB cable in.
Tried Kies, it keeps saying "connecting..."
Tried to flash original one (I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5, as step 1) in ODIN 3.09, I got the "FAIL" I tried 3 times I got "FAIL" 3 times although I got many "SUCCESS" at the same PC & USB cable.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please give me some ideals how to get over this. Thanks.
SOLVED
The issue is resolved by flashing I777 UCKH7 PIT.
Related
Ok so after looking everywhere for a solution and screaming like a mad man in the process i decided to make a thread here and see if someone can help me.
I was running the leaked Android 4.0.3 (got the files from software2tech.com/2012/01/26/complete-guide-update-android-4-0-3-i9100xxlp6-for-samsung-galaxy-s2-video/) and i was running fine. Now i decided to root my phone using software2tech.com/2012/01/27/how-to-root-samsung-galaxy-s2-android-ics-4-0-3-i9100xxlp6/#more-16920
When Odin restarted my Phone all i got was that yellow triangle and i wasn't able to do anything at all but go into download mode (recovery mode is not working) so i thought i could just flash the 4.0.3 Android again and it will all be fine right?....WRONG. Got an error in Odin and after that my phone just said "Firmware Upgrade encountered an error. Please select recovery mode in Kies and try again". Tried it but Kies is not recognizing my phone (neither on the "Firmware upgrade error" screen nor in download mode).
Tried Pistachios Recovery guide but the recovery is not working...i can flash the kernel (which sends me back to the yellow triange) but when i try to flash the recovery files or the bootloader i just get more errors. Also read that flashing a stock kernel could be able to fix a problem like this but how am i supposed to find out what my kernel version is, and choose the right one for my phone if i can't start my phone?
Edit: Ok so here are the errors i get when i try to flash
Recovery files:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bootloader:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS: My Provider is Alice
bump bump bump
tried with stock files....error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried the stock files again with the recovery kernel as pda (yeah probably not a good idea but i'm at the point where i don't really care anymore) got this error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Miigi said:
Ok so after looking everywhere for a solution and screaming like a mad man in the process i decided to make a thread here and see if someone can help me.
I was running the leaked Android 4.0.3 (got the files from software2tech.com/2012/01/26/complete-guide-update-android-4-0-3-i9100xxlp6-for-samsung-galaxy-s2-video/) and i was running fine. Now i decided to root my phone using software2tech.com/2012/01/27/how-to-root-samsung-galaxy-s2-android-ics-4-0-3-i9100xxlp6/#more-16920
When Odin restarted my Phone all i got was that yellow triangle and i wasn't able to do anything at all but go into download mode (recovery mode is not working) so i thought i could just flash the 4.0.3 Android again and it will all be fine right?....WRONG. Got an error in Odin and after that my phone just said "Firmware Upgrade encountered an error. Please select recovery mode in Kies and try again". Tried it but Kies is not recognizing my phone (neither on the "Firmware upgrade error" screen nor in download mode).
Tried Pistachios Recovery guide but the recovery is not working...i can flash the kernel (which sends me back to the yellow triange) but when i try to flash the recovery files or the bootloader i just get more errors. Also read that flashing a stock kernel could be able to fix a problem like this but how am i supposed to find out what my kernel version is, and choose the right one for my phone if i can't start my phone?
Edit: Ok so here are the errors i get when i try to flash
Recovery files:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bootloader:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS: My Provider is Alice
Click to expand...
Click to collapse
my friend
if u don't use software from xda forum, why u make posts here. go to software2tech.com and make posts there. u asked us to give a solution to something we never used and we don't know nothing about.
Not sure which CWM I was coming from, but I wanted to go back to stock. Here is what I did:
C:\Users\Brian\Downloads\Cell Phone\CI500_VZW_EH03_GB_CM.tar.md5
C:\Users\Brian\Downloads\Cell Phone\atlas_v2.2.pit
I select the partition box and got this error.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI500_VZW_EH03_GB_CM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help. I dont know what else to do. Thanks so much.
I literally have tried everything. Not sure if the .tar is incorrect, or what is happening. Phone wont turn on though, its stuck on the samsung logo boot.
Have you:
Tried a different usb cable (or several)?
Tried a different usb port?
Tried a different OS?
Tried a different version of Odin?
Tried redownloading the files?
Tried stock 2.2 Froyo instead?
Looks like it was the USB cable. Damn i spent like 2 hours researching and trying everything . Thanks for the response bro. Have a good one.
No problem, it's always the last thing you think of. Glad you got it though
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Jet5195 said:
So my friend was trying to fix the wifi on his Note while on Sky Rom (4.3), but, for some reason he happened to have clicked a link to the wrong section and was in the n7100 (international) section. He used Odin to flash the MJ5 bootloader which is the international version. Now his phone will only bootloop with the N7100 boot screen appearing. We are not able to access recovery but we can get to download mode. Once we got to download mode I have tried flashing the PIT file, root66, and the official VRAMC3. Each attempt without a PIT file causes this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And any attempts with the PIT file causes this
003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be very much appreciated because I have run out of ideas at this point.
Click to expand...
Click to collapse
I went through this last month and check these things:
- Try a different USB cord
- Try a different USB port
- Disable your antivirus
- May have to reboot your computer
When I softbricked a few weeks ago I went through this process for the first time, and I found I had to keep trying over and over but it finally ended up working.
Remember to unlock your bootloader after this process - which I did not and had to redo everything after rooting and flashing and getting the Verizon discovered unauthorized software etc.
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Jet5195 said:
Also, I wonder if this is part of the issue, while in download mode I get "PRODUCT NAME: GT-N7100" instead of sch-i605, could this be part of the issue?
And thanks for the ideas Darbylonia, I tried those and even different computers and still no luck.
Click to expand...
Click to collapse
Did you try looking through the top stickied post about how to recover from a soft brick? I would go there and see if the info helps and post there. I do think it is strange about the product name but there's got to be a fix so keep on...
Hello everybody. I have a Samsung Galaxy S4 factory unlocked.
A week ago I rooted my phone and changed the firmware to an Android Google Play Edition 4.4 Kitkat. Now, I would like to return to the official stock version. I downloaded the firmware from sammobile and other sources. When I try to flash using Odin, always get a FAIL. This is the ODIN messages history.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505VFGEMK2_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
I tried changing the USB port, uninstalling and instaling Kies, I used different root files, even I used a PIT file, following the steps in this thread (http://forum.xda-developers.com/showthread.php?t=1727443). I already check kies is not running on background. I tried with different Odin version (1.85, 3.04, 3.07 & 3.09)
I dont know how to fix this problem. Please if anyone can help me I really appreciate.
Thank you so much for all your replies.
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
t-mobile_mda said:
hi guys..
is there any wat to downgrade this version (i545VRUFNK1) to 4.3..?
Click to expand...
Click to collapse
yes downgraded..
first flash with this;
MK2_system_4downgrade
then flash,
MK2VZW-downgrade4rooting-AIOdin-gogolie
Bricked S4 SCH-I545
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
treaklet said:
NEED HELP PLEASE!!!
I tried the Odlin3 approach for full wipe (with 3.09, 3.07, 3.10 version) but I get a fail as posted below. I'm completely stuck. I tried using Kies approach posted on another tread and the approach on http://forum.xda-developers.com/showthread.php?t=2751461. Both approaches failed. I've downloaded about 20GB of firmware and each fails. When I just try to power on the device it shows the SAMSUNG name and the "Unlocked" icon. Any suggestions?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_I545VRUFNC5_I545VZWFNC5_1151670_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
ODIN Mode.
BladeRunner said:
When you boot into download mode what version does it say you are on? (it's the red lettering at the very top)
Click to expand...
Click to collapse
Odin Mode