what does the 4.0.4 brick affect in the hardware? - Galaxy S II Q&A, Help & Troubleshooting

what does that brickbug affect in galaxy s2 hardware?

Tefanym said:
what does that brickbug affect in galaxy s2 hardware?
Click to expand...
Click to collapse
There are a million and five threads about this on XDA.
It corrupts the EMMC chip, once corrupted you will need to replace the chip. Nothing can fix it.

can u tell me how much it costs to replace this chip?
so the motherboard and processor are both fine , and only this chip is gone?

Tefanym said:
can u tell me how much it costs to replace this chip?
so the motherboard and processor are both fine , and only this chip is gone?
Click to expand...
Click to collapse
there is a sticky thread for this issue under General section of this forum.
You will find it. Just search
Swyped from my Samsung Galaxy SII

excuse me , my phone doesnt't enter download mode nor recovery, is this the emmc faliure or motherboard one?
that was after wiping data of a 4.0.4 and i have used an app called sgs2 bootscreen chager by hellcati downloaded that app from playstore, after using it i got a boot loop,, so i tried to flash a couple of roms and ended up with aliance after that tried to install rootbox jb , but the instalation took much longer so i forced the phone into recovery again using the combination , after that my phone seems dead, so what happened and what should i do, please help me!!!:crying:

Tefanym said:
excuse me , my phone doesnt't enter download mode nor recovery, is this the emmc faliure or motherboard one?
that was after wiping data of a 4.0.4 and i have used an app called sgs2 bootscreen chager by hellcati downloaded that app from playstore, after using it i got a boot loop,, so i tried to flash a couple of roms and ended up with aliance after that tried to install rootbox jb , but the instalation took much longer so i forced the phone into recovery again using the combination , after that my phone seems dead, so what happened and what should i do, please help me!!!:crying:
Click to expand...
Click to collapse
You have to replace the whole motherboard - emmc is attached on it, and cannot be purchased/replaced separately.

and how much does this motherboard cost, i am out of warranty?

I wouldnt be surprised if Samsung wanted £200!.
If it were me Id buy a riff box kit rather than paying Samsung.
Sent from my GT-I9100 using xda premium

theunderling said:
I wouldnt be surprised if Samsung wanted £200!.
If it were me Id buy a riff box kit rather than paying Samsung.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
U can't use jtag to rescue a phone affected by this bug
Sent from my GT-I9100 using Tapatalk 2

bluefa1con said:
U can't use jtag to rescue a phone affected by this bug
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
so what will samsung actually do, if jtag cant help here?

Tefanym said:
so what will samsung actually do, if jtag cant help here?
Click to expand...
Click to collapse
Replace the whole motherboard
Sent from my GT-I9100 using Tapatalk 2

Related

Unbrick s5860 with usb jig

hello
i know there are a lot of topics with this issue and i am sorry for that
i bricked my samsung one week ago and since then i'm trying to repair it..i even made all those steps from the sticky thread from here,but nothing seems to work.today i received the usb jig and when i connected it the download mode didn't appear.
so what is the problem?is my battery empty?how do i charge it?
thanks
You're to start download mode by holding the home button, the volume down button then the power button consecutively.
XDA ♥
Follow this tutorial for using JIG...
http://www.youtube.com/watch?v=2KXBYyf2e28&feature=related
consegregate said:
You're to start download mode by holding the home button, the volume down button then the power button consecutively.
XDA ♥
Click to expand...
Click to collapse
i already tried this..nothing appears on my screen
ingbrzy said:
Follow this tutorial for using JIG...
Click to expand...
Click to collapse
i tried this too..maybe my battery is empty..
any other ideas?
Go to service
Charge your battery...
ingbrzy said:
Charge your battery...
Click to expand...
Click to collapse
can i charge my battery even if my phone doesn't power on?
No, you need a external charger....
How did u briked it did u used the rom manager .
Sent from my GT-S5830 using XDA App
hanut1 said:
How did u briked it did u used the rom manager .
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
yes..i bricked my phone using rom manager
Seems like nowadays more and more poor soul bricked their phone using rom manager. Why in the world u install rom manager to unsupported device. Lol.
If u just want the backup feature in room manager(cwm), theres unnofficial build of cwm in the forum. Yes its still unofficial, but it works great.
Sent from your phone
an0nym0us_ said:
Seems like nowadays more and more poor soul bricked their phone using room manager. Why on the world u install room manager to unsupported device. Lol.
If u just want the backup feature in room manager(cwm), theres unnofficial build of cwm in the forum. Yes its still unofficial, but it works great.
Sent from your phone
Click to expand...
Click to collapse
and the solution???? I have also the phon bricked by the rom manager...
sadly rom manager damages ur phones motherboard ....so now u hav to change ur motherboard .....even usb jig will not work .......so now u have to give it to service ...no other option... :-(
Sent from my GT-S5830 using XDA App
hanut1 said:
sadly rom manager damages ur phones motherboard ....so now u hav to change ur motherboard .....even usb jig will not work .......so now u have to give it to service ...no other option... :-(
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
and how much costs a new motherboard?
no idea go ta samsung service center theyll tell u .....
Sent from my GT-S5830 using XDA App
I just send my ACE to t-mobile... I hope will be free...
i hope they will not find out that you wanted to modify your device
Finnally, I have the SGA repaired with a new mother board, and all free, covered by the warranty!
If someone play with the rom manager, be caraful with the final disaster that's could you happen!!!!!
hapy for u
Sent from my GT-S5830 using XDA App

SAMSUNG GALAXY S2 GET HARD BRICK AT BACKUP ROOM help?

Deer, users.
I have one question, my GALAXY S2 get hard brick at restoure backup and he : -No power up -No boot -No download mode (odin mode) - No charging (usb/ac) -Not detectable by pc he dont turn , dont show nothing!!
i try combo volume down + menu+ power and dont work's I saw in the forum this software UnBrickable Mod http://forum.xda-developers.com/show....php?t=1236273) works in some phones and tablets i have a question this software works on galaxy S2 ?
Thanks
Ricardo
Ricardobng said:
Deer, users.
I have one question, my GALAXY S2 get hard brick at restoure backup and he : -No power up -No boot -No download mode (odin mode) - No charging (usb/ac) -Not detectable by pc he dont turn , dont show nothing!!
i try combo volume down + menu+ power and dont work's I saw in the forum this software UnBrickable Mod http://forum.xda-developers.com/show....php?t=1236273) works in some phones and tablets i have a question this software works on galaxy S2 ?
Thanks
Ricardo
Click to expand...
Click to collapse
Even if that mod works on gt i9100, it cant be used on your device as its alredy bricked and not booting.
Your last hope is usb jig that can be ordered from Ebay/Amazon.
If that doesnt work send it for Jtag service repair or to Samsung (50/50 chance warranty will be accepted).
Sent from my Galaxy S2 GT i9100
boki9999 said:
Even if that mod works on gt i9100, it cant be used on your device as its alredy bricked and not booting.
Your last hope is usb jig that can be ordered from Ebay/Amazon.
If that doesnt work send it for Jtag service repair or to Samsung (50/50 chance warranty will be accepted).
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
I have buy usb jig and dont work :\,
What rom were you currently on when you tried to restore your backup?
Sent from my GT-I9100 using xda premium
ephraim033 said:
what rom were you currently on when you tried to restore your backup?
Sent from my gt-i9100 using xda premium
Click to expand...
Click to collapse
i9100xwlpm_i9100oxelp8_i9100xxlq6 ics 4.04
Ricardobng said:
i9100xwlpm_i9100oxelp8_i9100xxlq6 ics 4.04
Click to expand...
Click to collapse
Did you use its stock kernel with cwm? People have been hard bricking their sgs2 with it (stock samsung kernel from 4.0.4 with cwm) where even Jtag couldn't repair it. Their only way out is a board replacement from samsung.
Sent from my GT-I9100 using xda premium
ephraim033 said:
Did you use its stock kernel with cwm? People have been hard bricking their sgs2 with it (stock samsung kernel from 4.0.4 with cwm) where even Jtag couldn't repair it. Their only way out is a board replacement from samsung.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
No i don't use cwm , i have use rom manager and i get hard bricking
Ricardobng said:
No i don't use cwm , i have use rom manager and i get hard bricking
Click to expand...
Click to collapse
Rom manager isn't recomended for sgs2 as it causes issues. Maybe it also caused the bricks people were having. Have you tried a fresh battery? If you did and it didn't boot. Samsung service center is your only way buddy.
Sent from my GT-I9100 using xda premium
ephraim033 said:
Rom manager isn't recomended for sgs2 as it causes issues. Maybe it also caused the bricks people were having. Have you tried a fresh battery? If you did and it didn't boot. Samsung service center is your only way buddy.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
No I dont try a fresH battery ( I will try) but when my S2 has stopped working he had 77% battery.
thx for your help. did you know if Ultimate UnBrickable Resurrector works on GT-I9100 ?
Ricardobng said:
No I dont try a fresH battery ( I will try) but when my S2 has stopped working he had 77% battery.
thx for your help. did you know if Ultimate UnBrickable Resurrector works on GT-I9100 ?
Click to expand...
Click to collapse
I don't think so since your internal memory or emmc is literally wiped out (if the cause of your brick is the one i told you about). If fresh battery doesn't work and you did everything, your last resort is samsung service center for a board replacement. If you still have your warranty just tell them when you woke up your phone won't turn on and don't mention rooting, flashing etc.
Glad to help mate.
Sent from my GT-I9100 using xda premium
Jtag
ephraim033 said:
I don't think so since your internal memory or emmc is literally wiped out (if the cause of your brick is the one i told you about). If fresh battery doesn't work and you did everything, your last resort is samsung service center for a board replacement. If you still have your warranty just tell them when you woke up your phone won't turn on and don't mention rooting, flashing etc.
Glad to help mate.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think is the only way send for samsung service 15 days without my s2 .
Well thanks for your help ! :
Ricardobng said:
I think is the only way send for samsung service 15 days without my s2 .
Well thanks for your help ! :
Click to expand...
Click to collapse
You're welcome mate. Goodluck.
Sent from my GT-I9100 using xda premium
hey bro plz update about your current status ??
what happens ??
did you send your phone to care ??

Galaxy S3 doesn't start - only download mode

Hi all guys, i'm new here and i need your help.
One day ago i installed the Custom ROM "Super Nexus Beta5" on my galaxy. It worked for a day but now, when i turn on my phone, i see this (attachment)
And i can only turn on in download mode.
If i flash some firmware with odin, i have this error: There is no Pit-Partition.
Can you help me?
Sorry for bas english, Thanks.
If there is no pit, you need motherboard replacement because of eMMC failure.
Sent from my Allview2SpeedDuo using XDA Premium HD app
punktnet said:
If there is no pit, you need motherboard replacement because of eMMC failure.
Sent from my Allview2SpeedDuo using XDA Premium HD app
Click to expand...
Click to collapse
So there is nothing to do?
I had custom rom so no warranty. If I use jig usb can I reset counter and use warranty?
Thanks
vila994 said:
So there is nothing to do?
I had custom rom so no warranty. If I use jig usb can I reset counter and use warranty?
Thanks
Click to expand...
Click to collapse
If youre in europe maybe you dont need. Try your luck.
Sent from my GT-I9500 using xda premium
testadeferro said:
If youre in europe maybe you dont need. Try your luck.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Ok, Thanks.
But if I use jig usb, it's sure that i reset counter and have warranty?
vila994 said:
Ok, Thanks.
But if I use jig usb, it's sure that i reset counter and have warranty?
Click to expand...
Click to collapse
Just try. And maybee someone in a store with know how and some devices can help you more.
Sent from my GT-I9500 using xda premium
You cant reset counter with usb jig on i9300 you can only enter download mode.For reset use app triangle away
Sent from my GT-I9300 using xda premium
marduj5 said:
You cant reset counter with usb jig on i9300 you can only enter download mode.For reset use app triangle away
Click to expand...
Click to collapse
Only works if phone boots
vila994 said:
Hi all guys, i'm new here and i need your help.
One day ago i installed the Custom ROM "Super Nexus Beta5" on my galaxy. It worked for a day but now, when i turn on my phone, i see this (attachment)
And i can only turn on in download mode.
If i flash some firmware with odin, i have this error: There is no Pit-Partition.
Can you help me?
Sorry for bas english, Thanks.
Click to expand...
Click to collapse
Try flashing ICS firmware. Then see if it boots... it happened one with me and I was able to fix it by flashing ICS than jb
Sent from my GT-I9300 using xda premium

[Q] New motherboard

Hi everyone,
My S3 motherboard has died and i can buy i new one for only €109.
The only problem is that it is completely blank, no IMEI or anything.
Can i install a new rom with Odin or is it more complicated than that, and how do you program the IMEI number?
Thanks
galaxymarc said:
Hi everyone,
My S3 motherboard has died and i can buy i new one for only €109.
The only problem is that it is completely blank, no IMEI or anything.
Can i install a new rom with Odin or is it more complicated than that, and how do you program the IMEI number?
Thanks
Click to expand...
Click to collapse
Wat is ur current and previous rom? Ur current baseband version?
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
JellyYogurt said:
Wat is ur current and previous rom? Ur current baseband version?
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
Click to expand...
Click to collapse
My dad bought it a few weeks ago and put an old simcard in it, when he wanted to replace the simcard he tried to pry with a screwdriver to get the card out and destroyed the mainbord.
I know how to flash a rom but my question is if its possible to flash a motherboard that has no software or anything on it.
You can't, take it to an authorised repair shop and they can.
I wouldn't advise discussing IMEI programming, it's illegal for you to attempt and will get your thread locked.
boomboomer said:
You can't, take it to an authorised repair shop and they can.
I wouldn't advise discussing IMEI programming, it's illegal for you to attempt and will get your thread locked.
Click to expand...
Click to collapse
Sorry, have nothing illigal in mind, its just that the new mobo is 0000000 i want to use the orig number.
Thanks
Yes, that's illegal in most countries and not possible for you to do.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Yes, that's illegal in most countries and not possible for you to do.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
So he's doomed?
Sent from my new galaxy s3 (Oh yeaaah)
-Post Deleted-
Mokiwipeout said:
So he's doomed?
Sent from my new galaxy s3 (Oh yeaaah)
Click to expand...
Click to collapse
No, buy a motherboard from a reputable source and it will come with a new imei number all of it's own.
Sent from my GT-I9300 using Tapatalk

I9300 Sudden Death After Cm 11 Flash

hello there, a friend of mine asked me to put CM 11 on his s3. He had stock 4.3(germany i guess) rooted. I flashed TWRP with Goomanager, wiped data,system,cache and dalvik then flashed the 10/05/2014 nightly with the gapps. The device power on just fine ,he installed a few apps from play store then he was playing around with the device when he locked it, then the device died.
What i tryed:
-wont enter recovery or download
-pulled the battery out pressed the power for 5s put it back in
-connected the charger then power on the device
Try a usb jig
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try a usb jig
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
now im trying to find one in my town
that wont work
In that case you have SDS, new motherboard required.
Sent from my GT-I9300 using Tapatalk
dany547 said:
that wont work
Click to expand...
Click to collapse
I think your friend played with something bad, did he use triangle away or overclocked cpu?
Cm11 has SDS fix and so does 4.3 stock... As advised your friend install something he shouldn't...
Sent from my GT-I9300 using Tapatalk
_Beni_ said:
I think your friend played with something bad, did he use triangle away or overclocked cpu?
Click to expand...
Click to collapse
f0xy said:
Cm11 has SDS fix and so does 4.3 stock... As advised your friend install something he shouldn't...
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
the problem got solved. I opened up th device, the case was a damaged power button, it was jammed or something, i replaced it and now it works just fine

Categories

Resources