Hi xda goers .
I'm trying to unroot my s3 ready for jb?
I've flashed back stock kernel via odin .
Flashed recovery through s.gs3 toolkit 1.0 which got rid of cwm etc.
But I'm still rooted?
It's still says custom binary in recovery mode & ota update fails @ 30%.
Do I flash full pda csc etc again?
Will it wipe my phone clean?
Don't wanna wipe my phone clean.
Help pls pls pls
You need triangle away to reset the counter. Then find your original firmware and flash with odin.
Edit: Backup your data.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
You need triangle away to reset the counter. Then find your original firmware and flash with odin.
Edit: Backup your data.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I've done a nandroid backup etc. Need root? Don't you to restore
So do I just flash full pda csc etc.
&
Do I really need triangle away?
Will doing a full flash wipe the phone. I'm unsure you see.
Cheers arsaw but I wanna know will it wipe all my files on sdcard / ext sdcard ?
http://forum.xda-developers.com/showthread.php?t=1856234
Check out faryab's stock firmware sticky in the general section.
In the op, there is a link to a YouTube video by totally dubbed. It shows you exactly what you need to do to return to stock.
Sent from my GT-I9300 using xda premium
Is better to reset the counter with triangle away. No harm right
Flash with PDA only.
Flashing original firmware shouldn't wipe your data. But backup your data for safety.
Sent from my GT-I9300 using xda app-developers app
Related
currently i have a 2.3.6 custom rom and would like to flash I9100XWLP9_I9100KPNLP1_KPN with odin, this is a 1-part odin flash, so i have to flash without re-partition and afterwards make a factory reset, is this the correct way to upgrade? thx
Yep that's right
Sent from my Transformer Prime TF201 using XDA Premium App
I dont think you need to do factory reset..
Sent from my GT-I9100 using xda premium
al_madd said:
I dont think you need to do factory reset..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
He doesn't NEED to, but it is usually better to start fresh. Reduces the chances of weird problems.
Every update I do, I back up all my app data using TB, full wipe, update, and then restore my TB backups.
nitramz said:
currently i have a 2.3.6 custom rom and would like to flash I9100XWLP9_I9100KPNLP1_KPN with odin, this is a 1-part odin flash, so i have to flash without re-partition and afterwards make a factory reset, is this the correct way to upgrade? thx
Click to expand...
Click to collapse
The real answer is no need for factory wipe its not in the instructions .
But as posted many of us do wipe the phone before an upgrade and factory reset afterwards .
It does no harm anyway and is probably good practice .
jje
nitramz said:
currently i have a 2.3.6 custom rom and would like to flash I9100XWLP9_I9100KPNLP1_KPN with odin, this is a 1-part odin flash, so i have to flash without re-partition and afterwards make a factory reset, is this the correct way to upgrade? thx
Click to expand...
Click to collapse
Yes, correct. Make sure re-partition is not checked.
Earlier today tried flashing an original firmware on my Galaxy S2 using this file GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar. Everything passed through Odin but seems my device doesn't want to boot flashing this. I also installed the Litening_Rom_v6-1.tar.md5 after that and again didn't want to boot through Odin.
I did manage to get into CWM and restore a nandroid backup and it boots fine now.
I am selling my S2 tomorrow and wanted to put it back to stock. Is there any way through CWM to flash a stock rom and unroot as seems odin is causing problems. If the CWM way isn't possible can anyone point me in the right direction for an original rom that will work.
Any help appreciated.
By the way i am on an unbranded S2 form Uk.
When you were flashing in Odin did you flash the kernel, recovery and the system? Or just the system?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
tpmullan said:
When you were flashing in Odin did you flash the kernel, recovery and the system? Or just the system?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Just flashed the file above with the pda button. (Only gave me the .tar file)
It is caused by not making a wipe cache and data before flash. Before selling, format also /system. First of all reset counter with Triangle Away if not yet
Sent from my GT-I9100 using Tapatalk 2
Phil3759 said:
It is caused by not making a wipe cache and data before flash. Before selling, format also /system. First of all reset counter with Triangle Away if not yet
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Will this mthod take me back to stock after I have done it?
Use the Odin instructions from this thread:
http://forum.xda-developers.com/showthread.php?t=1544487
Remember to select the PDA option, not other options on Odin. That should work without needing to format system, cache and dalvik cache. If it really doesn't work report here. And try to flash other Roms, like the NEE 4.0.4 (last one released).
memphisuklf said:
Will this mthod take me back to stock after I have done it?
Click to expand...
Click to collapse
With those steps you have an empty phone. If you flash a stock ROM you get your phone like when you bought it
Sent from my GT-I9100 using Tapatalk 2
delawalla said:
Use the Odin instructions from this thread:
http://forum.xda-developers.com/showthread.php?t=1544487
Remember to select the PDA option, not other options on Odin. That should work without needing to format system, cache and dalvik cache. If it really doesn't work report here. And try to flash other Roms, like the NEE 4.0.4 (last one released).
Click to expand...
Click to collapse
If he wants to sell it, your steps will not be enough to reset the phone like if it was new
Sent from my GT-I9100 using Tapatalk 2
Hi ok i rooted and loaded the nandroid of the JB thats floating the forum, I deleted some bloat wear theninstalled chainfire, so I opened it up and installed the drivers etc and it restarted, only to go no where
Here's what I have
Android system recovery <3e>
Options to choose from
Reboot system now
Aply update from abd
apply update from ext storage
wipe data factory reset
wipe cache partition
apply update from cache
a picture of a dead android with a red triangle coming out of his belly
now i tried adb but doesnt bring up the device when adb devices
I dont got another rom to apply only 2 nands
How can I get out of this mess please??????????
That is stock android recovery.
What happens when you hit reboot system now?
Sent from my GT-I9300 using xda premium
nodstuff said:
That is stock android recovery.
What happens when you hit reboot system now?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Just sticks on the galaxys s3 logo
Well you can try hit factory reset (will wipe everything, including internal storage)
Flashing cwm via Odin
Flashing a stock ROM via Odin.
Sent from my GT-I9300 using xda premium
nodstuff said:
Well you can try hit factory reset (will wipe everything, including internal storage)
Flashing cwm via Odin
Flashing a stock ROM via Odin.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
FActory reset done nothing
Can anyone point me in the right direction on how to do this through odin?
Kickasskev said:
FActory reset done nothing
Can anyone point me in the right direction on how to do this through odin?
Click to expand...
Click to collapse
When the ROM is booting it usually stays on the Samsung logo for a few minutes as it boots/builds dalvik-cache and all that jazz.
How long did you wait?
Do you have Odin already?
You'll need to download a stock ROM to flash first of all, or if you want there is am Odin flashable version of the jellybean ROM you flashed.
Sent from my GT-I9300 using xda premium
nodstuff said:
When the ROM is booting it usually stays on the Samsung logo for a few minutes as it boots/builds dalvik-cache and all that jazz.
How long did you wait?
Do you have Odin already?
You'll need to download a stock ROM to flash first of all, or if you want there is am Odin flashable version of the jellybean ROM you flashed.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It doesnt get past the first lot of writing, just holds there saying galaxy siii gt i9300
I have odin already but thats it
Kickasskev said:
It doesnt get past the first lot of writing, just holds there saying galaxy siii gt i9300
I have odin already but thats it
Click to expand...
Click to collapse
Oh OK, you'll need to flash it so.
download whatever stock ROM you need from samfirmware.com or the jellybean leaked one (Odin in title) and we'll talk then. (700+mb)
You can flash whatever firmware you want from samfirmware.com (obviously for gt-i9300) but region doesn't matter, I used XXBLG8 firmware. (UK)
Sent from my GT-I9300 using xda premium
nodstuff said:
Oh OK, you'll need to flash it so.
download whatever stock ROM you need from samfirmware.com or the jellybean leaked one (Odin in title) and we'll talk then. (700+mb)
You can flash whatever firmware you want from samfirmware.com (obviously for gt-i9300) but region doesn't matter, I used XXBLG8 firmware. (UK)
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks
downloading I9300OXABLG8
Wonder what happened an where the hell my recovery went??
Wont be installing chainfire anymore
Kickasskev said:
Thanks
downloading I9300OXABLG8
Wonder what happened an where the hell my recovery went??
Wont be installing chainfire anymore
Click to expand...
Click to collapse
Chainfire didn't get rid of your recovery, stock android has a file in ota's which overwrites custom recoveries on boot, i think flashing cf-root seems to solve this problem, I still have my custom recovery after several reboots.
Chainfire3d may not be compatible with sammy jellybean just yet.
Sent from my GT-I9300 using xda premium
nodstuff said:
Chainfire didn't get rid of your recovery, stock android has a file in ota's which overwrites custom recoveries on boot, i think flashing cf-root seems to solve this problem, I still have my custom recovery after several reboots.
Chainfire3d may not be compatible with sammy jellybean just yet.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Just sorted it out and got it working, thanks so much for your help much appreciated :good:
Hi guys don't know this was posted before or not but anyway. I'm on stock lh1 firmware and just want to root my phone to back up my data using titanium backup and after backing up i want to reset the binary counter so if i use triangle away app will it wipe my phone and remove the root????????? Or every thing remains the same excerpt the binary counter????????
Sent from my GT-I9300 using xda premium
sohail77 said:
Hi guys don't know this was posted before or not but anyway. I'm on stock lh1 firmware and just want to root my phone to back up my data using titanium backup and after backing up i want to reset the binary counter so if i use triangle away app will it wipe my phone and remove the root????????? Or every thing remains the same excerpt the binary counter????????
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
triangle away only reset count and reset status to official
but there is Q&A section for this
just the binary counter
Hi xda developers members,
I'm currently trying to reinstall my phone back to stock with just the stock files and nothing else, can anyone tell me how I would go about this? I just want the phone cleared of all apps and other files as I want a fresh start with it.
Galaxy is currently running Jellybean 4.1.1 rooted.
Thanks.
factory reset in recovery if you've not been flashing any custom roms/rooted etc...
EDIT - or just do a reset through the settings menu
mikep99 said:
factory reset in recovery if you've not been flashing any custom roms/rooted etc...
Click to expand...
Click to collapse
Unfortunately the OS is rooted. Is that an issue?
EDIT: Thanks for the information, so if I reset the phone via Settings > Back Up or Reset > Factory Data Reset. This will wipe all the apps, files and the root off my phone and just leave me with the OS?
nope -
run triangle away first if you want to reset the counter
then flash a stock ROM firmware from sammobile.com - use ODIN to flash it.
then full wipe through recovery
should all be stock then....
mikep99 said:
nope -
run triangle away first if you want to reset the counter
then flash a stock ROM firmware from sammobile.com - use ODIN to flash it.
then full wipe through recovery
should all be stock then....
Click to expand...
Click to collapse
I'm a bit of a newbie when it comes to all this stuff so bare with me on this!
1. Why would I want to reset the counter?
2. I don't mind the device being rooted, I just want all the files and apps gone, I wouldn't mind if it was just the OS and the rooted files. Would that be done if I did the Factory Data Reset?
Thanks.
Oh right, yeah, if you still want root just do a factory reset
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
Oh right, yeah, if you still want root just do a factory reset
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Cheers mate, much appreciated. I've just done as you've said and it's worked, hooray!
Now one more question if I may. At the moment, when I go and check for an update, it says "Your device has been modified. Software updates are not available"
This is a pain, as I don't want to loose my root, but I want to be able to update I guess, anyway to bypass this?
Im afraid not. You can still update through kies I think, but youll lose root.
The choice is basically root or ota updates..
Easiest thing to do is flash any new firmwares using ODIN then reroot using CF Root..
Or use custom roms..
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
Im afraid not. You can still update through kies I think, but youll lose root.
The choice is basically root or ota updates..
Easiest thing to do is flash any new firmwares using ODIN then reroot using CF Root..
Or use custom roms..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Fair enough, suppose we can't have it all!
So when the next Jellybean update comes out, I just download the firmware from SamMobile, and flash it via ODIN. Sounds easy enough!
Thanks for all the help mate, once again it's much appreciated. Enjoy your evening.
Yep, thats correct.
Cheers, and you!
Sent from my GT-I9300 using xda app-developers app
Meticulous said:
Hi xda developers members,
I'm currently trying to reinstall my phone back to stock with just the stock files and nothing else, can anyone tell me how I would go about this? I just want the phone cleared of all apps and other files as I want a fresh start with it.
Galaxy is currently running Jellybean 4.1.1 rooted.
Thanks.
Click to expand...
Click to collapse
There is a function in the Samsung Kies Called "Firmware Upgrade and Initialization" which is located in the Tools of the Samsung Kies 2.5.0.
Fill in the information it requires and follow the instructions.
It will repartition your phone and install the new pure firmware just like it is a new phone.