Sola won't charge or turn on - Sony Xperia P, U, Sola, Go

I unlocked the bootloader and installed the advanced stock kernel from this forum.
When the fastboot flashing was finished, I unplugged the phone and now it won't turn on. I've tried charging it, but the red light disappears after some time and neither the hard reset nor the regular way wake the phone. I've tried fastbooting the phone again, it appeared on my computer for a few seconds and then was gone again. It's not recognized at all.
What is going on? Is the phone completely dead?

Good morning/afternoon to all.
I am facing a similar issue here ;-((
I was flashing DoomLord's DoomKernel on my brand new Xperia Sole, all went well&I stupidly disconnected my device from usb without giving the "fastboot reboot" comand... After that, it vibrated once&that was it..
Now, the phone seems completely dead..
- It doesn't switch on at all
- It's not recognized when i plug it in my pc (either by the pc itself, or flashtools)
- I can't enter any mode (fastboot, flashmode, u name it)
- No leds will light up no matter what
Any ideas? Did i brick it for good??
;-(((
---------- Post added at 06:45 PM ---------- Previous post was at 05:48 PM ----------
Ehm, mate, I think the rest of xda should be making fun of us by now, IF u made the same thing that i did - that is flashing a kernel which is NOT for sole.. (I'm blushing here..)
I got carried away with all the new stuff, as i owned a ZTE previously, that i didn't notice that i was flashing a kernel ment for Xperia S..
Anyhow, try the following, as it worked for me:
Press&hold "volume up" key
Press and hold "power" key
After abt 10secs it'll vibrate once, keep holdin'em pressed for 15secs, untill yr phone vibrates 3 times
If successful, u've just hard powered off yr device
After that u should be able to enter fastboot mode&once u do that u can flash the right kernel this time, proper for sole..
(ie: http://forum.xda-developers.com/showthread.php?t=1688169)
Hope it works
Tnx

Yes it's surprisingly easy to mistake Xperia S for Xperia Sola. Especially since we are in denial that there isn't ICS for Sola yet.
What I did was hard reset (The 3 reset route), then hold volume up key + Power and shove it into the USB port. After another vibration, release the power, but keep your button on the volume up.
You should be in fastboot, so flash another system image and it should work.

Quite true Snowstormzz..
aperioculos, did u have any luck with yr phone? Is everything working properly now, or what?
Tnx.

If your phone doesnt turn on at all doesnt charge pc dont recognize it then you have damaged its semcboot or trim area so you will need setool to unbrick that. Alejandressimo can help you in this problem
Sent from my R800i using xda premium

Not necessarily,mine was totally unresponsive as well, but it came back to normal with the procedure I mentioned here above.
Sent from my MT27i using xda app-developers app
Owner of Xperia Sola & ZTE Blade

Related

[Q] [U] Not turning on after installing kernel. Bricked?

Hi guys, yesterday I unlocked and rooted my Xperia U, as I didnt have time anymore, I decided to install the kernel today, so when I installed it, I tried turning on my phone - nothing. I just got that red light thingy sometimes that is active 2-3 seconds, I tried charging but still nothing, funny thing is, when I connect it to my 2nd PC with XP on it, it connects, but in My Computer I only see "Digital Camera" and cant open it, also Windows Explorer popup for it keeps constantly, well, popping up but its empty and I cant select anything. I'm now downloading flashtool, is there anything I can do else? Im desperate, I got this phone for only 3 days.
Okay, now I'm in flashtool, I'm about to start flashing but I cant get into fastboot mode... What should I do?
Bump? :crying:
Please dont make me spam, I searched everything, I'm pretty sure my problem is unique, I cant access fastboot. Nothing
try this:
1. charge your phone for about 1 hour
2. open flashtool then click fastmode and choose your firmware.
3. make sure your phone is off ( i dont know if this is the same with xperia U volume up+power button wait til vibrates three times)
4. when it says connect your phone into fastmode, connect your phone via usb, then hold volume up + power button and wait till it vibrates three times, then hold power button+ volume down.
5. it will flash your firmware.
or you can flash the stock kernel (just extract from ftf, same instructions above).
I charged it for the whole night, the problem is, I cant access fastboot. All the drivers are installed but nothing.
I'm sending my phone for repair probably, with rooting I broke my warrant, what's going to happen?
tavic said:
I charged it for the whole night, the problem is, I cant access fastboot. All the drivers are installed but nothing.
I'm sending my phone for repair probably, with rooting I broke my warrant, what's going to happen?
Click to expand...
Click to collapse
Then y don't you flash it with your firmware via flash mode
Sent From Xperia Sola White (MT27i)
Rooted Stock ICS
Hit Thanks If I Helped!!
Ok fast boot doesn't work,how about Flashboot?
Sent from my LT26i using xda premium
Nope, can't access that either.
Ok does your phone vibrates when you turn it on?Do you have any LED light?Does it respobd to anything?
Sent from my LT26i using xda premium
Not vibrating, also, no led.
The only sign I get is when I take out the battery and put it back in, it vibrates for a second. Thats it.
Try to remove the battery and than try all keys combination,and also try to get to connect it to your flashtool.Try hard reset combination.Remove the battery,put the battery,hold power+vol. up button for. 20 sec. If that doesn't make.Try the same only with vol. down button .If that doesn't work,take it to the service shop than....
Hit Thaks if I helped
Hold vol up when replacing the battery, then quickly shove the USB cable in. Phone should vibrate when you put the battery in and you have a second or two to get it into fastboot or flashboot.
Probably a bad install of a kernel, make sure you're using the right one for your phone.
Not sure if it works for the U, but that's how I fixed my Sola.
Snowstormzzz said:
Hold vol up when replacing the battery, then quickly shove the USB cable in. Phone should vibrate when you put the battery in and you have a second or two to get it into fastboot or flashboot.
Probably a bad install of a kernel, make sure you're using the right one for your phone.
Not sure if it works for the U, but that's how I fixed my Sola.
Click to expand...
Click to collapse
Exactly what I did too. Try again and again. You'll succeed. have stock kernel at hand.

[Q] Have I bricked my Sola?

Hi everyone, I need help because I have probably bricked my Xperia Sola. Yesterday I tried to flash ClockWorkMod recovery ( http://forum.xda-developers.com/showthread.php?t=1766892 ). I flashed kernel.elf via fastboot and after flashing I unplugged the phone and I pressed the power button, the phone vibrated and the Sony logo appeared then the phone vibrated again and the blue led turned on and.. nothing else! It doesn't boot and i don't know what to do I noticed that if i press volume up while the blue led is on, the phone goes into recovery mode but I don't know what to do! Can someone help me?
p.s. Sorry for my bad english!
Sent from my U8185 using xda app-developers app
Well, if you clicked the volume up while he was with that blue LED, and opened his recovery, he may still go start the kernel... remove and replace the battery and turn on the phone, maybe it solves.
CaioA2 said:
Well, if you clicked the volume up while he was with that blue LED, and opened his recovery, he may still go start the kernel... remove and replace the battery and turn on the phone, maybe it solves.
Click to expand...
Click to collapse
I can't remove it! The phone has a non-removable battery!
OK, do the following, click the power button and hold it more or less by 10secs and release when you feel three vibrations . It will reboot your phone .
I followed your instruction but the phone didn't vibrate 3 times.. I'm desperate, do you think that if I bring my phone in a Sony support center they will fix it?
He turn on a Red led when you pressing the power + up vol? have to be pressed in the same time.. you can fix it easily here. you dont need to go to a sony support center now. If reset dont work , you can use flashtool to make it stock again.
---------- Post added at 05:00 PM ---------- Previous post was at 04:55 PM ----------
If you want , flash this rom , its have root and CMW -> http://forum.xda-developers.com/showthread.php?t=1897908 you can use adb to flash , or with flashtool , what is much more easy to use.
alezmoroni said:
I followed your instruction but the phone didn't vibrate 3 times.. I'm desperate, do you think that if I bring my phone in a Sony support center they will fix it?
Click to expand...
Click to collapse
Out of curiosity, were you on GingerBread or ICS when you flashed this ? And is your bootloader unlocked ?
Flash a Stock as mentioned before and you should be fine.You can go Either Stock ICS http://forum.xda-developers.com/showthread.php?t=1914264
or GB (as in the previous post).
And the Force reboot is Hold Vol Up + Power for around 15 sec. You will initially have one vibration, then three. After which it turns off.
What were you on? ICS or GB?
It's just an incorrect kernel flash. Phone can still be fixed.
I've first hand experience with this >_>
Don't send to Sony. They're useless.
Hold power + vol up for 10 secs. The phone will vibrate once, keep the buttons pressed until the vibration is felt 3 times.
Let go of Power, keep the vol up pressed. Then quickly shove the USB port in.
Flash these kernels via fastboot, depending on which version you were on.
GB: http://forum.xda-developers.com/showthread.php?t=1897908
ICS: http://forum.xda-developers.com/showthread.php?t=1922029
EDIT:
Or you can save all the trouble with the following:
Download Flashboot. After the 3 vibes, quickly hold vol down and shove the USB port in. Flash the stock ICS rom (includes kernel) which will fix your problems as well.
http://forum.xda-developers.com/showthread.php?t=1914264
There's a global version in the thread somewhere.
Snowstormzzz said:
EDIT:
Or you can save all the trouble with the following:
Download Flashboot. After the 3 vibes, quickly hold vol down and shove the USB port in. Flash the stock ICS rom (includes kernel) which will fix your problems as well.
http://forum.xda-developers.com/showthread.php?t=1914264
There's a global version in the thread somewhere.
Click to expand...
Click to collapse
Oh my god! Thank you so much! My phone works again!!! I flashed the ics .ftf file and now my phone is working!!

Xperia Go bootloop

The thing is my Xperia Go is stuck at bootloop and i cant access anything.. no CWM, no entering fastboot and computer doesnt seem to recognize it at all. It only goes up to SONY logo, stays there a while and then blanks the screen just to do it all over again.
It started when i flashed my phone with new kernel.
Any ideas of what should i do now?
All help will be appreciated im new to this.
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Min3r said:
Install Flashtool, then go the drivers folder in Flashtool, and install your drivers (Including the Fastboot & Flashmode drivers)
Then, turn off your phone. Select the Stock FTF from Flashtool and click Flash
Then, when it asks you connect the phone, Holding Down the Volume Down Key, connect the usb cable to phone (It should already have been connected to pc before connecting to phone)
Wait 2 seconds and a green light comes on.. Then wait a few minutes and your phone will be back to normal
Click to expand...
Click to collapse
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
This seems like a hardbrick although flashing a custom kernel shouldnt have caused that issue.. Did you do the cable connecting in the exact order I said ? You might have missed that ,with any luck
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
vikativehkleja said:
I have done all that and did it again just to be sure.. atfer green light comes on it changes to red in few sec and my phone shows SONY for 1/4 min and then shuts off while charging. i have tried to enter fastboot mode too but the same thing happens.. correct led colour few secs and then logo and off.
Click to expand...
Click to collapse
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
drsanket_xperia_u said:
Dun worry
Remove the battery if possible
If not
Switch of the phone by pressing volume us plus power key simultaneously for few seconds
Then flash official ftf via flashtool
---------- Post added at 09:55 AM ---------- Previous post was at 09:54 AM ----------
Its because u r not connecting it properly
While connecting keep only the volume down button pressed ( dun press the power key along to enter flashmode)
And its not a hard brick so dun worry
Just a bad kernel
Click to expand...
Click to collapse
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
vikativehkleja said:
This is weird and awkward.. when i started my computer today, read this and redid all the steps i got it to flash and it WORKS!
This incident has made me even more interested.
Thanks to BOTH of you for taking the time to answer, i know it was a stupid question to begin with.
Click to expand...
Click to collapse
Anytime buddy

[Sola] Cyanogenmod 9 bricked my sola?

I've tried to install Cyanogenmod 9 on my Xperia Sola, I've unlocked bootloader official way, flashed kernel from this forum specialy made for sola (http://forum.xda-developers.com/showthread.php?p=28957468&postcount=412 This One), then boot.img of cyanogenmod 9 (FXP203) and...
When I want to do anything with phone, it just flashes my red led. I mean, that led is still on, when I press Power it just turn off. And when I try to connect my phone in fastboot mode, It don't react at all. Can I already throw it away through window?
I put it under a charger to see if it's just off energy, but i've noticed, that after a while, red led just turns off and that's all.
My god, help me or I'll be back on Nokia 3310
You've used the S kernel, not the Sola.
Download the FXP for Sola (Pepper) here;
http://forum.xda-developers.com/showthread.php?t=1876929
Flash boot.img via fastboot. To get in, hold vol up + power. Wait for 3 vibrations.
Hold vol up. Then jam the USB cable in. You should be in fastboot.
Alternatively, flash the stock sola ftf via flashboot.
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
MelaPL said:
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
Click to expand...
Click to collapse
Happened to me (I use Xperia GO). What I did is (as mentioned above) - Hold the power button and Volume Up button for sometime (it vibrates once after a few seconds, do not leave the buttons - continue to do so and after a few more seconds until 3 vibrations) and then the phone switches off. Now, hold the Volume Up button and plug in the USB cable - you'd be able to get in the fastboot mode. Flash a stock kernal and that should help.
If your phone is completely down (no charge at all), then above won't help. Plugin the charger and and wait for a few mins (before the red light goes off - you should now have a good knowledge on when the light goes off!) and try then try the above step. Once the 3 vibration comes, remove the charger and go ahead with the flash mode.
Hope this helps!
Thanks,
B.
Edit: By the way, I had my SIM Card and Memory card inserted in the phone when the phone was completely down without any charge. I don't know how, but it makes a difference with you try so (atleast in my case) with them.
If it does not vibrate, then it's a hard brick =\ You need the phone to be at least partially responsive to get into fastboot/flashboot.
Keep holding down. It should vibrate after 25 seconds or so.
Otherwise, you have to bring it to Sony and tell them their phone died on you.
Right now It dosen't even blink with Led. It's totaly down. I cant lock fbootloader, so I'm doomned. Hope that won't cost much...
Install Sony Update Service (SUS) and try to recover your phone from there.
Last shot here, but here's to hoping that the PC at least detects your phone.
Otherwise.... Yeah =\
If you unlocked your bootloader Pc companion will be useless for you cause it will not detect your phone,.,,
i think other way is to flash the stock ftf for you device using flashtool.... that wuld be the best shot for you...
please respond if this fix your problem
No, SUS will detect, but will refuse to flash. It will say "Phone has been modified".
Need to see whether it's a hard brick. If even SUS does not recognise, then bring it to Sony =\
None of the above works. It's just dead and sometimes flashes red light. PC Companion says that there's no phone connected. Hope I will be able to gain a varranty or I'll be on Nokia 3310. But I'm not verry cheerful about that...
Flashtool does not react when I plug in my phone in fastboot or flash.
Hey bro,
Its highly unlikely for hardbrick to happen to Sony phones by flashing a differnt Kernel when Flashtool is there Pretty sure that it ought to work, follow the steps below (Note that the order of usb cable connection is the most important thing as doing it wrong will not allow Flashtool to connect to the phone when its bricked ! )
First, try plugging it in to charger for a while to ensure that there's some charge. Follow up with the Vol and power Button to make sure its turned off. Then after that follow this procedure *exactly*
1) Prepare Flashtool and select the FTF. (Flashmode )
2) When flashtool asks yo to connect the phone, connect the USB cable to PC
3) Then, holding down ONLY the Vol Down button (No Power button, Note that ) connect the phone to the USB cable and in a few seconds, Flashtool will start flashing
I know you tried many variations but missing out on one or the other detail during your previous tries might have caused the lack of success Just try it and let us know what happens
Best of luck and hope you dont have to go to Nokia World !
Cheers
Nope, it's still not working. It just dosent detect phone. I'm pluging in, holding only volume key and I'm waiting 5 minutes - nothing happend.
Nokia 5530 for now, but come one...
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
wermesz said:
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
Click to expand...
Click to collapse
Lol things u get on the internet!!!
First there is no such key combination to start fastboot k so just dun break ur buttons in an attempt to start it ...
Steps 1,2&3 are steps to get ur device force restart and force shutdown and let me tell you one thing
step 1 is wrong it power button and volume + button. That's it first the phone will vibrate once for force restart and if u keep pressing it will bypass over to force shutdown which is indicated by 3 vibrations..
Sent from my Xperia Sola using xda premium
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
Hi,
it worked !
after doing the steps I have posted earlier I managed to flash my xperia sola with the right boot.img (the one from fxp pepper) and install fxp via CWM. Should work for you too.
One tip: you have to remove the assert from fxp installation script.
Br,
Wermesz
@op, your battery is dead and isn't accepting any external charge. Try replacing your battery with a charged one. That is if sola supports user replaceable batteries.
Sent from my ST25i using xda app-developers app

Very Very Urgent Z2 to support needed Request

Guys my xperia z2 just gone dead, i have read every form and did everything hard rest flash tool xperia companion sony companion and another chinise software.... tired almost every country roms,, it did not dedected by pc it vibrate 3 times shows red led ...when i press power and vol up button it shows blue led and then pc sounds,,that it connects but in flashtool it does not begin the flashing it just give this msg
23/024/2016 15:24:00 - INFO - Starting phone detection
23/024/2016 15:24:06 - INFO - Device connected in flash mode
23/028/2016 15:28:25 - INFO - Please connect your device into flashmode.
23/028/2016 15:28:26 - INFO - Opening device for R/W
23/028/2016 15:28:26 - INFO - Reading device information
23/028/2016 15:28:35 - INFO - Unable to read from phone after having opened it.
please i need valid and help give life back to z2 help meeeee
My CDA is 1281-0195 also i cant find this specific on anywhere on web or flashtool help neeed pleaseee request do something figure out
and it gone sudden death i was using phone in morining i install few apps recently using OLX and then sudden play store stop working error shows up then andriod stop working i restarted the phone then it keeps on stuck on sony and xperia logo thats all
Install the drivers
angel_18panlaqui said:
Install the drivers
Click to expand...
Click to collapse
For your sake I hope you are on unlocked bootloader and if that's the case all you have to do is to flash one of the custorm boot images with recovery, boot to recovery, flash any ROM of your choice. If your bootloader is locked you'll have to unlock it first via flashtool by pressing the unlock button. Hope you'll come right and good luck.
>> Install drivers for Z2
>>Restart your pc..
>>keep z2 unplugged.
>> PLUGIN ONLY WHEN SAYS PLUG IN WITH VOLUME minus.
And then flashed...
Hayeni said:
For your sake I hope you are on unlocked bootloader and if that's the case all you have to do is to flash one of the custorm boot images with recovery, boot to recovery, flash any ROM of your choice. If your bootloader is locked you'll have to unlock it first via flashtool by pressing the unlock button. Hope you'll come right and good luck.
Click to expand...
Click to collapse
24/038/2016 00:38:33 - INFO - Your phone bootloader cannot be officially unlocked
24/038/2016 00:38:33 - INFO - You can now unplug and restart your phone
i have install all drivers its so strange issue even i have got new battery i thought battery is creating issue,but one thing i saw strange today
its charging while sony logo is display with red led,plus it gets heatup from back so to resolve that issue i unplugged the display cable from PCB
to charge fully and now i just finish with charging trying to do as you say it giving me this error just safe me to getting this z2 change into useless dummy
Which flashtool version are you using?
Sent from my D6502 using XDA Premium 4 mobile app
fayez69 said:
Which flashtool version are you using?
Sent from my D6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
0.9.22.1 am using still no progress worked almost non stop 4 hours on this phone to bring it back to life
airbornic said:
0.9.22.1 am using still no progress worked almost non stop 4 hours on this phone to bring it back to life
Click to expand...
Click to collapse
I always use the old version of flashtool as i encountered some errors with new ones.
try this if it works. flashtool-0.9.18.1
https://docs.google.com/file/d/0B3WS5xjTt_0tQTZzQmNiZFc0R2M/edit
michel090428 said:
I always use the old version of flashtool as i encountered some errors with new ones.
try this if it works. flashtool-0.9.18.1
https://docs.google.com/file/d/0B3WS5xjTt_0tQTZzQmNiZFc0R2M/edit
Click to expand...
Click to collapse
But Sir, Question is how shell i make my phone detected by PC first i have tried on several PC's already when i press Power + Vol it vibrate and beeps. Do you think there can be any fault in PCB?
Right now the state is am getting sony logo plus perfect display even battery working only prob is its stuck on bootloop and not getting flashed at all.
This phone really frustrated me alot
airbornic said:
But Sir, Question is how shell i make my phone detected by PC first i have tried on several PC's already when i press Power + Vol it vibrate and beeps. Do you think there can be any fault in PCB?
Right now the state is am getting sony logo plus perfect display even battery working only prob is its stuck on bootloop and not getting flashed at all.
This phone really frustrated me alot
Click to expand...
Click to collapse
First of all the phone needs to be powered on normally without pressing any button comibnation (in your case it is a bootloop).
if flashtools detect the phone and finished preparing the firmware you select, it will ask you to power off the phone and connect it in flash mode. in your case you will need to force power off by pressing voulme up+power till phone vibrates 3 times. after that you disconnect the phone from PC and now you need to start the phone in flash mode: press VOL DOWN while connecting it to PC and then flashtool will start the flashing process.
check your PM's
Yea, try the older version, I also got error on newer one.
Sorry for late reply, got a bit occupied.
And yes, as mentioned above, disconnect your phone, wait for at least 30 seconds, press and hold power+volume up till the time the phone vibrates thrice, now release the buttons and wait for another 30 seconds. Start The flashtool and select the firmware to flash and let it prepare the files, once it asks to connect the phone, connect it while holding the volume down button
Sent from my D6502 using XDA Premium 4 mobile app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
And for a change u can try inserting the main end of USB cable to the port of your laptop /desktop, keep the phone connected to it beforehand. Once I had problem flashing my phone, actually my jack was too dirty, so the cable use to get disconnected because of dirty jack. That worked for me.
Best of luck.
Sent from my D6502 using XDA Premium 4 mobile app
fayez69 said:
Yea, try the older version, I also got error on newer one.
Sorry for late reply, got a bit occupied.
And yes, as mentioned above, disconnect your phone, wait for at least 30 seconds, press and hold power+volume up till the time the phone vibrates thrice, now release the buttons and wait for another 30 seconds. Start The flashtool and select the firmware to flash and let it prepare the files, once it asks to connect the phone, connect it while holding the volume down button
Sent from my D6502 using XDA Premium 4 mobile app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
And for a change u can try inserting the main end of USB cable to the port of your laptop /desktop, keep the phone connected to it beforehand. Once I had problem flashing my phone, actually my jack was too dirty, so the cable use to get disconnected because of dirty jack. That worked for me.
Best of luck.
Sent from my D6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried each and every method mentioned in post i guess its an issue of CDA match with firmware???
My CDA is 1281-0195...major issue am facing i cant find firmware related to that can you help me find a source of this firmware?
1281-0195 D6503 Telenor SE (Sweden)-Black...

Categories

Resources