Guys my xperia z2 just gone dead, i have read every form and did everything hard rest flash tool xperia companion sony companion and another chinise software.... tired almost every country roms,, it did not dedected by pc it vibrate 3 times shows red led ...when i press power and vol up button it shows blue led and then pc sounds,,that it connects but in flashtool it does not begin the flashing it just give this msg
23/024/2016 15:24:00 - INFO - Starting phone detection
23/024/2016 15:24:06 - INFO - Device connected in flash mode
23/028/2016 15:28:25 - INFO - Please connect your device into flashmode.
23/028/2016 15:28:26 - INFO - Opening device for R/W
23/028/2016 15:28:26 - INFO - Reading device information
23/028/2016 15:28:35 - INFO - Unable to read from phone after having opened it.
please i need valid and help give life back to z2 help meeeee
My CDA is 1281-0195 also i cant find this specific on anywhere on web or flashtool help neeed pleaseee request do something figure out
and it gone sudden death i was using phone in morining i install few apps recently using OLX and then sudden play store stop working error shows up then andriod stop working i restarted the phone then it keeps on stuck on sony and xperia logo thats all
Install the drivers
angel_18panlaqui said:
Install the drivers
Click to expand...
Click to collapse
For your sake I hope you are on unlocked bootloader and if that's the case all you have to do is to flash one of the custorm boot images with recovery, boot to recovery, flash any ROM of your choice. If your bootloader is locked you'll have to unlock it first via flashtool by pressing the unlock button. Hope you'll come right and good luck.
>> Install drivers for Z2
>>Restart your pc..
>>keep z2 unplugged.
>> PLUGIN ONLY WHEN SAYS PLUG IN WITH VOLUME minus.
And then flashed...
Hayeni said:
For your sake I hope you are on unlocked bootloader and if that's the case all you have to do is to flash one of the custorm boot images with recovery, boot to recovery, flash any ROM of your choice. If your bootloader is locked you'll have to unlock it first via flashtool by pressing the unlock button. Hope you'll come right and good luck.
Click to expand...
Click to collapse
24/038/2016 00:38:33 - INFO - Your phone bootloader cannot be officially unlocked
24/038/2016 00:38:33 - INFO - You can now unplug and restart your phone
i have install all drivers its so strange issue even i have got new battery i thought battery is creating issue,but one thing i saw strange today
its charging while sony logo is display with red led,plus it gets heatup from back so to resolve that issue i unplugged the display cable from PCB
to charge fully and now i just finish with charging trying to do as you say it giving me this error just safe me to getting this z2 change into useless dummy
Which flashtool version are you using?
Sent from my D6502 using XDA Premium 4 mobile app
fayez69 said:
Which flashtool version are you using?
Sent from my D6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
0.9.22.1 am using still no progress worked almost non stop 4 hours on this phone to bring it back to life
airbornic said:
0.9.22.1 am using still no progress worked almost non stop 4 hours on this phone to bring it back to life
Click to expand...
Click to collapse
I always use the old version of flashtool as i encountered some errors with new ones.
try this if it works. flashtool-0.9.18.1
https://docs.google.com/file/d/0B3WS5xjTt_0tQTZzQmNiZFc0R2M/edit
michel090428 said:
I always use the old version of flashtool as i encountered some errors with new ones.
try this if it works. flashtool-0.9.18.1
https://docs.google.com/file/d/0B3WS5xjTt_0tQTZzQmNiZFc0R2M/edit
Click to expand...
Click to collapse
But Sir, Question is how shell i make my phone detected by PC first i have tried on several PC's already when i press Power + Vol it vibrate and beeps. Do you think there can be any fault in PCB?
Right now the state is am getting sony logo plus perfect display even battery working only prob is its stuck on bootloop and not getting flashed at all.
This phone really frustrated me alot
airbornic said:
But Sir, Question is how shell i make my phone detected by PC first i have tried on several PC's already when i press Power + Vol it vibrate and beeps. Do you think there can be any fault in PCB?
Right now the state is am getting sony logo plus perfect display even battery working only prob is its stuck on bootloop and not getting flashed at all.
This phone really frustrated me alot
Click to expand...
Click to collapse
First of all the phone needs to be powered on normally without pressing any button comibnation (in your case it is a bootloop).
if flashtools detect the phone and finished preparing the firmware you select, it will ask you to power off the phone and connect it in flash mode. in your case you will need to force power off by pressing voulme up+power till phone vibrates 3 times. after that you disconnect the phone from PC and now you need to start the phone in flash mode: press VOL DOWN while connecting it to PC and then flashtool will start the flashing process.
check your PM's
Yea, try the older version, I also got error on newer one.
Sorry for late reply, got a bit occupied.
And yes, as mentioned above, disconnect your phone, wait for at least 30 seconds, press and hold power+volume up till the time the phone vibrates thrice, now release the buttons and wait for another 30 seconds. Start The flashtool and select the firmware to flash and let it prepare the files, once it asks to connect the phone, connect it while holding the volume down button
Sent from my D6502 using XDA Premium 4 mobile app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
And for a change u can try inserting the main end of USB cable to the port of your laptop /desktop, keep the phone connected to it beforehand. Once I had problem flashing my phone, actually my jack was too dirty, so the cable use to get disconnected because of dirty jack. That worked for me.
Best of luck.
Sent from my D6502 using XDA Premium 4 mobile app
fayez69 said:
Yea, try the older version, I also got error on newer one.
Sorry for late reply, got a bit occupied.
And yes, as mentioned above, disconnect your phone, wait for at least 30 seconds, press and hold power+volume up till the time the phone vibrates thrice, now release the buttons and wait for another 30 seconds. Start The flashtool and select the firmware to flash and let it prepare the files, once it asks to connect the phone, connect it while holding the volume down button
Sent from my D6502 using XDA Premium 4 mobile app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
And for a change u can try inserting the main end of USB cable to the port of your laptop /desktop, keep the phone connected to it beforehand. Once I had problem flashing my phone, actually my jack was too dirty, so the cable use to get disconnected because of dirty jack. That worked for me.
Best of luck.
Sent from my D6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried each and every method mentioned in post i guess its an issue of CDA match with firmware???
My CDA is 1281-0195...major issue am facing i cant find firmware related to that can you help me find a source of this firmware?
1281-0195 D6503 Telenor SE (Sweden)-Black...
Related
hello guys.
well i have a very big problem here.
i got 3 weeks ago an xperia S white.
i updated and rooted my device, was on 2.3.4 now 4.0.4 bootloader locked and rooted.. Yeah!!!!
everything was cool and excellent.
but here comes my stupid nephew and i dont know what he did.. but the device wont turn on and wont charge the battery .
i was thinking ok ok ok, with flashtool and everything cool...
but heres the problem, the device wont start in flashmode
i set flashtool and all, but when you need to plug the device pressing the vol - the flashtool wont recognize the device, so it does nothing...
i have charged the device for almost 6 hrs and nothing,
turn on with Vol +.... nothing as well....
so, i think its bricked but how??
so heres my question is there any way to "unbrick" this device???
thanks for any answer.
ivanchu86 said:
hello guys.
well i have a very big problem here.
i got 3 weeks ago an xperia S white.
i updated and rooted my device, was on 2.3.4 now 4.0.4 bootloader locked and rooted.. Yeah!!!!
everything was cool and excellent.
but here comes my stupid nephew and i dont know what he did.. but the device wont turn on and wont charge the battery .
i was thinking ok ok ok, with flashtool and everything cool...
but heres the problem, the device wont start in flashmode
i set flashtool and all, but when you need to plug the device pressing the vol - the flashtool wont recognize the device, so it does nothing...
i have charged the device for almost 6 hrs and nothing,
turn on with Vol +.... nothing as well....
so, i think its bricked but how??
so heres my question is there any way to "unbrick" this device???
thanks for any answer.
Click to expand...
Click to collapse
Have you tried holding Volume Up + POWER until it vibrate 3 times?
ronin1728 said:
Have you tried holding Volume Up + POWER until it vibrate 3 times?
Click to expand...
Click to collapse
i have pressed those buttons for almost 5 minutes and nothing happend..
thanks for the reply
Maybe the battery got empty while flashing,if you have a friend with Same phone try to switch batteries and flash it again.
Sent from my LT26i using Tapatalk 2
gm007 said:
Maybe the battery got empty while flashing,if you have a friend with Same phone try to switch batteries and flash it again.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
thanks.
nope the battery have 75 % test this battery in another device.
omg im lost... :crying:
btw he said something, he told me he saw yellow letters.....
and the only thing i can think is clockwork mod...
what the **** he was doing there i dont know....
if he deleted something, can be fixed???
ivanchu86 said:
thanks.
nope the battery have 75 % test this battery in another device.
omg im lost... :crying:
btw he said something, he told me he saw yellow letters.....
and the only thing i can think is clockwork mod...
what the **** he was doing there i dont know....
if he deleted something, can be fixed???
Click to expand...
Click to collapse
Well ask him what he was doing maybe he flashed a firmware for another phone.
Sent from my LT26i using Tapatalk 2
I had the same Problem, after a Kernel flash.
Xperia S seems to be dead, Power + Vol. UP didnt worked, it just vibrated once.
But now its working again. What i did:
Connected it via USB, hold the Power + Vol. UP button until it vibrated 3 times and than released the Power button but kept the Vol. UP Pressed.
Now it should be in Fastboot mode again.
Hope it will work for you. :fingers-crossed:
volume + and volume -
ivanchu86 said:
hello guys.
well i have a very big problem here.
i got 3 weeks ago an xperia S white.
i updated and rooted my device, was on 2.3.4 now 4.0.4 bootloader locked and rooted.. Yeah!!!!
everything was cool and excellent.
but here comes my stupid nephew and i dont know what he did.. but the device wont turn on and wont charge the battery .
i was thinking ok ok ok, with flashtool and everything cool...
but heres the problem, the device wont start in flashmode
i set flashtool and all, but when you need to plug the device pressing the vol - the flashtool wont recognize the device, so it does nothing...
i have charged the device for almost 6 hrs and nothing,
turn on with Vol +.... nothing as well....
so, i think its bricked but how??
so heres my question is there any way to "unbrick" this device???
thanks for any answer.
Click to expand...
Click to collapse
Try pressing both vol+ and vol- while holding the power button for about 10 seconds, you should get 1st one vibration and then 3 vibrations. worked for me when I thought I had bricked my S.
lito003 said:
I had the same Problem, after a Kernel flash.
Xperia S seems to be dead, Power + Vol. UP didnt worked, it just vibrated once.
But now its working again. What i did:
Connected it via USB, hold the Power + Vol. UP button until it vibrated 3 times and than released the Power button but kept the Vol. UP Pressed.
Now it should be in Fastboot mode again.
Hope it will work for you. :fingers-crossed:
Click to expand...
Click to collapse
corum3 said:
Try pressing both vol+ and vol- while holding the power button for about 10 seconds, you should get 1st one vibration and then 3 vibrations. worked for me when I thought I had bricked my S.
Click to expand...
Click to collapse
ok thanks i know that......
and thats the main problem the phone wont vibrate... wont turn on
it only does NOTHING.
and for fastboot mode .... I thought it needed the bootloader unlocked
ivanchu86 said:
ok thanks i know that......
and thats the main problem the phone wont vibrate... wont turn on
it only does NOTHING.
and for fastboot mode .... I thought it needed the bootloader unlocked
Click to expand...
Click to collapse
You could still get into flashmode as well.
And you don't need to have the bootloader unlocked for fastboot,but you can't flash stuff like other kernels than stock.
But if you are able to get into fastboot,you know that it is not dead.
Try charging it over night and then try getting it into flashmode by pressing vol down while plugging the USB in,it worked for me when I flashed MIUI without a kernel.
You can try using Sony update service, or just go to pc companion. In the update section you can click on repair. The phone doesn't need to be in any mode, it will say it automatically if it recognizes your phone. Which is naturally good news. Gl. I thought I bricked my phone a month ago. Those phones are unbrickable!!!
Sent from my LT26i using xda app-developers app
By reading all the comments i think that Your battery is dead(and its not replaceable either).What was the battery % when you gave him the phone?Whatever happened...it is not allowing battery to charge.Removing battery means breaking warranty.So i would suggest you to go to the sony shop,as a last resort!
Dont tell them anything about what happened,just say battery ran out and now its not starting.
See this(non-removable battery) is a big reason unbrickable phones also brick.
---------- Post added at 07:19 AM ---------- Previous post was at 07:18 AM ----------
elvirag said:
You can try using Sony update service, or just go to pc companion. In the update section you can click on repair. The phone doesn't need to be in any mode, it will say it automatically if it recognizes your phone. Which is naturally good news. Gl. I thought I bricked my phone a month ago. Those phones are unbrickable!!!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
To use the "repair" option you need to have your phone turned on with minimum 50% battery!!!
nrcheq much
hey broo...i had the same problem....the battery drain was sooo crazy...so i started to flash the doom kernel v4a and then the XHS v3 rom..nothing wrong...started fine ...but the problem was ...no wifi...get an error while starting the wifi service...i downloaded the hotfix from doomlord...and installed it via recovery mode...so i got a boootloop...while boot looping several times ..battery ran out...same problem...lucky cuz i have a warranty..went to the shop and he told me he charged the battery external...and replaced it back and started fine....BTW i started the same topic and someone deleted it..so my advice for you...your phone is not broken...its just empty...charged it external ..and i hope it will work with you.
if it works...let me know.
i also got my phone rooted without unlocking bl ,installed cwm recovery and found out that battery cannot be charged when the phone is turned off..someone told me that version of recovery replaced the stock power-off charging program..
so i think your phone is just out of energy.
Sent from my LT26i using xda app-developers app
ronin1728 said:
Have you tried holding Volume Up + POWER until it vibrate 3 times?
Click to expand...
Click to collapse
It worked for my Xperia P today too, brilliant, thank you. I was really flapping because I go on vacation tomorrow and a lot of my ticket information is in the phone.
I was only restoring my contacts from PC after an update when mine died.
---------- Post added at 12:21 PM ---------- Previous post was at 12:12 PM ----------
elvirag said:
You can try using Sony update service, or just go to pc companion. In the update section you can click on repair. The phone doesn't need to be in any mode, it will say it automatically if it recognizes your phone. Which is naturally good news. Gl. I thought I bricked my phone a month ago. Those phones are unbrickable!!!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
My Xperia P died WHEN I was using PC companion!
PC Companion won't recognise your phone in any event if the phone isn't switched on. The program is garbage anyway, I have tried it on two different laptops (including a Sony Vaio) and when trying to restore stuff back to the phone it hangs all the time.
you can use emma flashtool by sony to flash stock firmware but you must get into fastboot mod charge your phone gt emma ready then plug in your phone with vol - hold and then flashwith emma flashtool
Lesson learnt: don't let anyone except you to use your phone especially when its rooted
Sent from my LT22i using xda premium
I unlocked the bootloader and installed the advanced stock kernel from this forum.
When the fastboot flashing was finished, I unplugged the phone and now it won't turn on. I've tried charging it, but the red light disappears after some time and neither the hard reset nor the regular way wake the phone. I've tried fastbooting the phone again, it appeared on my computer for a few seconds and then was gone again. It's not recognized at all.
What is going on? Is the phone completely dead?
Good morning/afternoon to all.
I am facing a similar issue here ;-((
I was flashing DoomLord's DoomKernel on my brand new Xperia Sole, all went well&I stupidly disconnected my device from usb without giving the "fastboot reboot" comand... After that, it vibrated once&that was it..
Now, the phone seems completely dead..
- It doesn't switch on at all
- It's not recognized when i plug it in my pc (either by the pc itself, or flashtools)
- I can't enter any mode (fastboot, flashmode, u name it)
- No leds will light up no matter what
Any ideas? Did i brick it for good??
;-(((
---------- Post added at 06:45 PM ---------- Previous post was at 05:48 PM ----------
Ehm, mate, I think the rest of xda should be making fun of us by now, IF u made the same thing that i did - that is flashing a kernel which is NOT for sole.. (I'm blushing here..)
I got carried away with all the new stuff, as i owned a ZTE previously, that i didn't notice that i was flashing a kernel ment for Xperia S..
Anyhow, try the following, as it worked for me:
Press&hold "volume up" key
Press and hold "power" key
After abt 10secs it'll vibrate once, keep holdin'em pressed for 15secs, untill yr phone vibrates 3 times
If successful, u've just hard powered off yr device
After that u should be able to enter fastboot mode&once u do that u can flash the right kernel this time, proper for sole..
(ie: http://forum.xda-developers.com/showthread.php?t=1688169)
Hope it works
Tnx
Yes it's surprisingly easy to mistake Xperia S for Xperia Sola. Especially since we are in denial that there isn't ICS for Sola yet.
What I did was hard reset (The 3 reset route), then hold volume up key + Power and shove it into the USB port. After another vibration, release the power, but keep your button on the volume up.
You should be in fastboot, so flash another system image and it should work.
Quite true Snowstormzz..
aperioculos, did u have any luck with yr phone? Is everything working properly now, or what?
Tnx.
If your phone doesnt turn on at all doesnt charge pc dont recognize it then you have damaged its semcboot or trim area so you will need setool to unbrick that. Alejandressimo can help you in this problem
Sent from my R800i using xda premium
Not necessarily,mine was totally unresponsive as well, but it came back to normal with the procedure I mentioned here above.
Sent from my MT27i using xda app-developers app
Owner of Xperia Sola & ZTE Blade
Suddenly my sola stopped working, i tried flash tool hard reset and all but it is not working and not getting detected.
Please say me what to do. Im a bit worried please help me fast :crying::crying::crying:
press volume up plus power key till u feel 3 vibrations
then follow
sometimes it may take upto 30seconds
http://forum.xda-developers.com/showthread.php?t=2023135
Also make sure ur sola is charged properly
Sent from my Xperia U using Tapatalk 2
drsanket_xperia_u said:
press volume up plus power key till u feel 3 vibrations
then follow
sometimes it may take upto 30seconds
http://forum.xda-developers.com/showthread.php?t=2023135
Also make sure ur sola is charged properly
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
i have tried it all but its not working, i haven't tried 30 seconds will try it now..
before ant of this happened the charging was around 70.
drsanket_xperia_u said:
press volume up plus power key till u feel 3 vibrations
then follow
sometimes it may take upto 30seconds
http://forum.xda-developers.com/showthread.php?t=2023135
Also make sure ur sola is charged properly
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
i have took it to a service center they said that battery boosting is also not happening what should i do plzzz help me..
holding the hard reset combination for around 2 minutes and still holding
so u bought it back from service center??? u should have given it to them...
aint it under warranty?
Sent from my Xperia U using Tapatalk 2
drsanket_xperia_u said:
so u bought it back from service center??? u should have given it to them...
aint it under warranty?
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
it is under warranty and just less than a month old. I didn't bring it back they only gave it to me back saying they cant do it
saratsarat7 said:
it is under warranty and just less than a month old. I didn't bring it back they only gave it to me back saying they cant do it
Click to expand...
Click to collapse
They cant do it? Then ask them who can, after you are under warranty...
mirost1 said:
They cant do it? Then ask them who can, after you are under warranty...
Click to expand...
Click to collapse
I got it as a gift from my sister from Singapore and they are saying that it cant be done here.. need to search another service center, sir if you know any one or any method that can make my phone alive again please say me or any link to any post with my problem, i am searching now and if you know any other things please help me..
Thank you
saratsarat7 said:
I got it as a gift from my sister from Singapore and they are saying that it cant be done here.. need to search another service center, sir if you know any one or any method that can make my phone alive again please say me or any link to any post with my problem, i am searching now and if you know any other things please help me..
Thank you
Click to expand...
Click to collapse
any help plzzzzz
saratsarat7 said:
i have tried it all but its not working, i haven't tried 30 seconds will try it now..
before ant of this happened the charging was around 70.
Click to expand...
Click to collapse
And what was the problem, did the led flash or you got an error?
Sent from my MT27i using xda app-developers app
matood said:
And what was the problem, did the led flash or you got an error?
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
no i was just charging my mobile and after some time when i saw it there was no response at all.. i tried all the tools but nothing happened even the charging led is not blinking.
i am using project gx gaming rom and provided kernel and suddenly this happened please help every thing was so normal before and i don't know when this happened suddenly
saratsarat7 said:
no i was just charging my mobile and after some time when i saw it there was no response at all.. i tried all the tools but nothing happened even the charging led is not blinking.
i am using project gx gaming rom and provided kernel and suddenly this happened please help every thing was so normal before and i don't know when this happened suddenly
Click to expand...
Click to collapse
That rom is using overclocked kernel, that should be the problem,... But one try.
Just switch off (volume up and power until 3 vibrations), just in case, the open flashtool, click on that flash and select fastboot mode.
Then keep volume up and connect with pc and see if the led goes violet.
matood said:
That rom is using overclocked kernel, that should be the problem,... But one try.
Just switch off (volume up and power until 3 vibrations), just in case, the open flashtool, click on that flash and select fastboot mode.
Then keep volume up and connect with pc and see if the led goes violet.
Click to expand...
Click to collapse
sir there is no led notification on the mobile, i can change the kernel if that rom doesn't support if only i can be back to stock.
can we go to fast-boot without doing anything ?? What do u think happened to my device
saratsarat7 said:
sir there is no led notification on the mobile, i can change the kernel if that rom doesn't support if only i can be back to stock.
can we go to fast-boot without doing anything ?? What do u think happened to my device
Click to expand...
Click to collapse
If ypu tried and it did nothing it means it not entering fastboot and probably your device is bricked and my guess is overclocked kernel, but it's just a guess.
Have you tried what i wrote you??
matood said:
If ypu tried and it did nothing it means it not entering fastboot and probably your device is bricked and my guess is overclocked kernel, but it's just a guess.
Have you tried what i wrote you??
Click to expand...
Click to collapse
Mobile is already switched off and when i try to hard reset it nothing is happening, i have tried the combination of all the buttons and nothing ever happened no vibration at all and using the flash tool in flash mode the lights are not coming.
If in your case the mobile is bricked what should i be possibly doing ??
matood said:
If ypu tried and it did nothing it means it not entering fastboot and probably your device is bricked and my guess is overclocked kernel, but it's just a guess.
Have you tried what i wrote you??
Click to expand...
Click to collapse
Is it possible to flash anther kernel in any other way ?? and to say that the battery led is also not showing up, is it because of the kernel ??
i have been using that rom for more about 10 days and everything was fine then..
saratsarat7 said:
Mobile is already switched off and when i try to hard reset it nothing is happening, i have tried the combination of all the buttons and nothing ever happened no vibration at all and using the flash tool in flash mode the lights are not coming.
If in your case the mobile is bricked what should i be possibly doing ??
Click to expand...
Click to collapse
Just try only one combination, keep volume up button and connect to pc, this way it connect in fastboot mode. If the led doesnt even blink, the phone is hard bricked probably. And then only warranty might help...
But try what I ask you do before...
matood said:
Just try only one combination, keep volume up button and connect to pc, this way it connect in fastboot mode. If the led doesnt even blink, the phone is hard bricked probably. And then only warranty might help...
But try what I ask you do before...
Click to expand...
Click to collapse
i have tried it, i have been pressing the volume up and power button for about 5min and no vibrations are felt..
i went to one of the sony service centers my home and they said that battery boosting is also not happening and they returned it back to me, when i connect to the computer using flash tool led doesn't blink may be then the mobile is hard bricked ??
no other way to solve the problem sir ??
saratsarat7 said:
i have tried it, i have been pressing the volume up and power button for about 5min and no vibrations are felt..
i went to one of the sony service centers my home and they said that battery boosting is also not happening and they returned it back to me, when i connect to the computer using flash tool led doesn't blink may be then the mobile is hard bricked ??
no other way to solve the problem sir ??
Click to expand...
Click to collapse
Once again
1. If you hold, not keep pressing but hold volume up+power then 1 vibration is reboot and if you keep holding them 3 vibrations is switch off.
2. I asked you something else, start flashtool, press flash and choose fastboot.
Then, your phone is off you said, hold only volume up button, HOLD and CONNECT to pc. If you led blinks violet you are in fastboot mode,
If not just let it connected to flash tool, close the window from fastboot with options and watch the main flashtool window if you will see some report.
Just watch for 10min if not, then...
matood said:
Once again
1. If you hold, not keep pressing but hold volume up+power then 1 vibration is reboot and if you keep holding them 3 vibrations is switch off.
2. I asked you something else, start flashtool, press flash and choose fastboot.
Then, your phone is off you said, hold only volume up button, HOLD and CONNECT to pc. If you led blinks violet you are in fastboot mode,
If not just let it connected to flash tool, close the window from fastboot with options and watch the main flashtool window if you will see some report.
Just watch for 10min if not, then...
Click to expand...
Click to collapse
Volume up + power nothing is happening and the below is the log for flash tool
12/038/2013 22:38:05 - INFO - <- This level is successfully initialized
12/038/2013 22:38:05 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-13 22:53:30
12/038/2013 22:38:05 - INFO - You can drag and drop ftf files here to start flashing them
12/038/2013 22:38:10 - INFO - Device disconnected
12/038/2013 22:38:17 - INFO - Launching Fastboot Toolbox 1.0 by DooMLoRD
12/038/2013 22:38:17 - INFO - Device Status: NOT FOUND
12/038/2013 22:38:52 - INFO - Finished Fastboot Toolbox
what should i do now ??
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Remove the back cover and find the OFF button, you need to push it with a pencil while holding the power button at the same time until it vibrates or turns off.
PLEASE READ USER'S MANUAL
read this http://forum.xda-developers.com/showpost.php?p=43355247&postcount=2
Ok but i cant go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok but i can go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
You may go into recovery to restore a backup...but not always works. If it keeps getting a boot loop you may need to use flashtool to repair it
Ok but can you give me instructions what to do
Sent from my ZTE Blade G using xda app-developers app
@KiaTheKing try this : in cwm go to storage and mount >> format /system. Then reboot. May this will help you.
Sent from my C5303 using XDA Premium 4 mobile app
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Keep the phone turned off. Repair it with PC Companion or Update Service, both are Official Sony tools.
http://www.sonymobile.com/gb/tools/update-service/
Ok thanks i will try if someone has another solution pls post!
Ruchra said me that i must to flah ftf using flashtool can someone help me with this?and give detailed instructions how to flash it and what ftf to flash.thank you for support.
Sent from my ZTE Blade G using xda app-developers app
1) Download correct ftf from general section, general one for your device.
2) turn phone off with power button under the back cover till you get the 3 vibrations.
3) download flashtool and install all the drivers.
4) start flashtool and close PC companion ( if you have this open)
5) plug USB into phone
6) hold volume down and plug USB into pc, ( should get a green light on xperia sp on led for short time)
7) flashtool should identify device attached in flash mode.
8) select flash and use correct tft you downloaded earlier.
You may need to get files ready as phone can then load to Sony logo again after a few minutes. Got to flash it quick. May need to do it 2-3 times before you get the timing right, took me a few attempts. Hope this helps.
Sent from my Nexus 7 using xda app-developers app
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
My phone reboots always when computer want to install driver for flashmod? what to do
bez_iom said:
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
Click to expand...
Click to collapse
PLS HELP
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
bez_iom said:
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
Click to expand...
Click to collapse
Yup, and then phone go to sony logo!and when i go flash it says Error in processheader: 31 : A device attached
to do system is not functioning
Error flashing aborted
EDIT: i tried again and it starts to flash now i will se does it works.
Тhank you.You saved my life..
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Can you give some information about your phone.
Specifically the model, FW version and region of your subscription before you messed up.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
bez_iom said:
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
Click to expand...
Click to collapse
when flashing an ftf file, your phone must be completely turned off, when the flashtool says "connect your device" what you're going to do is hold the VOL DOWN button while connecting your micro-usb to your phone, when you connect the usb to your phone, the green LED light must light and then when the light comes out, that's the only time you'll release the VOL DOWN button.
Glad it worked for you.
Sent from my Nexus 7 using xda app-developers app
Do exactly as follows, and your device will be fine..
first, keep the phone for charging.. that time u will either get a charging notification or a green led will be lit up, when u see either of these two,disconnect the device and it will stay off. Now move to the next step
Visit this link:
http://www.sonymobile.com/us/tools/pc-companion/
Click on Download PC Companion
Run the software and install it
Turn the phone off and disconnect it from the computer
1. No matter what the program says do not connect the phone until you complete step 9
2. In the welcome screen you will see the different modules available for you including the "Support Zone" option. Click on "Start" below it.
3. On the next page Click on "Start" under "Phone Software Update"
At this point if you get an error stating that "Unable to install update components" or "Server is busy" , then please proceed to step 12
4. The program will say that there is no phone connected. Click on the option below that reads: "Repair my phone" the program will issue you a warning about the content that you will lose during the update
5. Choose the option to continue.
6. The program will issue a final message warning you of possible data lost during the update. Click on the checkmark and then on "Next".
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose your phones model from the list then click on "Next" then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.)
Please do let me know if this has worked
Hello,
I have recently made a horrible mistake, I flashed the incorrect ROM on my Xperia Z3v leaving the phone bricked. I am asking for your help. I have tried using the Flashtool but I am not certain if it's the phone or I that is causing a mistake. The steps thus far that I have followed.
Downloaded: Flashtool & Drivers
Installed: Drivers for Xperia Z3v
Downloaded: Firmware from XperiFirm
Now, the issue next is nothing shows up in my firmware when I attempt to flash. I have checked the source folder the .ftf files are there.
Furthermore:
When I hold VOL UP and plug in the USB>Blue led is indicated
When I hold VOL DOWN and plug in USB>Red flashes with a second of green whilst vibrating
Found this video on youtube: https://www.youtube.com/watch?v=dtaUxuorVSA
Exactly like this, checked for a solution seems like he repaired it via sony. Unfortunately for me I don't have that luxury.
**Update**
I installed the lastest release of flashtool (0.9.22.2) but it occurred to me to revert back to the previous release (0.9.18.6)
Now I can finally see the firmware but I am still having issues actually flashing the file. I get errors such as:
ERROR - root : this bundle is not valid
ERROR - Cannot delete C:\Users\Juan\.flashTool\firmwares\prepared\userdata.sin
**More Information**
I should include I am on a locked bootloader
same
that seem the same with my situation
Okay the green light is flash mode / upgrade mode. The blue light is fast boot. You want it on with the green light on to flash it once it's bricked. You can't flash it using fast boot mode because the boot loader isn't unlocked.
Now what you have to do is get it with the green light on and then the drivers installed.
Can't delete the file means that it had error while trying to flash and all that you have to do is restart the app and that goes away.
Now for the next problem is that I had this one and what I did to fix it is that I had to reinstall the drivers because those weren't correct and I did reinstalled it and it all worked good. Thanks.
Download the correct firmware for your phone (model and Country).
Use flashtool to install it on your phone
Works with a locked bootloader, no need for USB debugging.
The first error might be you ended up downloading the incorrect or incomplete firmware
I had the exact problem that you are having. I ended re downloading the flashtool a few times from various computers and then i got it to work. I figured when i downloaded it the first time i had a version that was to old/new. Or a bad connectiin when i downloaded it first time. After i downloaded flashtool again itthwn worked without issue just as it should. Whatever the provlem was for me was having to do with the download or version i downloaded wouldnt work completely. I think my internet connection when i downloaded it wasnt very good and maybe didnt download it right.
I made the same mistake too, trying to flash a z3 zip file. Then I got to run around my home city to find help. Then there's a guy. He had to open the back cover and connect directly to the circuit board in order to do something about the eMMC and SEtool or... something, I'm not sure. The phone is alive again! (costed quite a lot for a student, but... yay?). Funny though, he said the circuit board is similar to a z2 and not a z3. Maybe you could find someone who knows about these kinds of thing. Hope that help.
Girouette said:
I made the same mistake too, trying to flash a z3 zip file. Then I got to run around my home city to find help. Then there's a guy. He had to open the back cover and connect directly to the circuit board in order to do something about the eMMC and SEtool or... something, I'm not sure. The phone is alive again! (costed quite a lot for a student, but... yay?). Funny though, he said the circuit board is similar to a z2 and not a z3. Maybe you could find someone who knows about these kinds of thing. Hope that help.
Click to expand...
Click to collapse
That's strange were you on a locked bootloader?
Currently attempting to fix it once more, will update if I find anything out.
DireSpook said:
That's strange were you on a locked bootloader?
Currently attempting to fix it once more, will update if I find anything out.
Click to expand...
Click to collapse
Yeah, I think? I mean, it's right out of the box. Also, I think it's worth mentioning that the guy had to use SEtool twice to get mobile signal.
Did you fix the problem? I have the same problem now.
With a Z3v. D6708. I have a problem, got a wrong ROM, the flashee and now not start the phone in any way. The only way to start is "System Recovery" volume + power, which has 4 options: 1. "Continue Power UP", 2. "Safe mode", 3. "Factory Reset" and 4. "Power Down". The thing is try from flashtool but when I give "volume down" and connect the computer does not recognize. When light it even reaches the boot animation. When I give power with USB cable is connected in a loop is vibrating and shows red, blue and green.
I have exactly the same problem of the youtube video.
As it could fix the problem?
Some help ?
Thank you !
Pd. The device only have FastBoot.
did u solve this?
DireSpook said:
Hello,
I have recently made a horrible mistake, I flashed the incorrect ROM on my Xperia Z3v leaving the phone bricked. I am asking for your help. I have tried using the Flashtool but I am not certain if it's the phone or I that is causing a mistake. The steps thus far that I have followed.
Downloaded: Flashtool & Drivers
Installed: Drivers for Xperia Z3v
Downloaded: Firmware from XperiFirm
Now, the issue next is nothing shows up in my firmware when I attempt to flash. I have checked the source folder the .ftf files are there.
Furthermore:
When I hold VOL UP and plug in the USB>Blue led is indicated
When I hold VOL DOWN and plug in USB>Red flashes with a second of green whilst vibrating
Found this video on youtube: https://www.youtube.com/watch?v=dtaUxuorVSA
Exactly like this, checked for a solution seems like he repaired it via sony. Unfortunately for me I don't have that luxury.
**Update**
I installed the lastest release of flashtool (0.9.22.2) but it occurred to me to revert back to the previous release (0.9.18.6)
Now I can finally see the firmware but I am still having issues actually flashing the file. I get errors such as:
ERROR - root : this bundle is not valid
ERROR - Cannot delete C:\Users\Juan\.flashTool\firmwares\prepared\userdata.sin
**More Information**
I should include I am on a locked bootloader
Click to expand...
Click to collapse
got solved? me to have same problem
Bricked for days!
Is anyone still following this thread. I have the same problem after trying to install MIUI 6 on my rooted unlocked TWRP'd Xperia z3V. After the MIUI installation I have nothing but the symptoms below.
Not able to get into flashmode
No screen or bootup
No recovery
Symptoms:
1 -When plugged into PC or wall it only blinks RED/GREEN light and vibrates.
2 -Holding POWER the light turns and stays GREEN until released (then returns to #1)
3 -Holding POWER + VOLUME UP BLUE light stays on and puts phone in Fastboot mode
4 -Holding POWER + VOLUME DOWN does nothing (continues to do #1)
Please Help!!!
Google Sony Developers. Try to unlock your bootloader.
Sent from my D6708 using XDA-Developers mobile app
I think the phone will reject the command. Tried on a bricked z3v and that's the response I get from fastboot with the Sony commands given through the developer aite.
matrix$ said:
Is anyone still following this thread. I have the same problem after trying to install MIUI 6 on my rooted unlocked TWRP'd Xperia z3V. After the MIUI installation I have nothing but the symptoms below.
Not able to get into flashmode
No screen or bootup
No recovery
Symptoms:
1 -When plugged into PC or wall it only blinks RED/GREEN light and vibrates.
2 -Holding POWER the light turns and stays GREEN until released (then returns to #1)
3 -Holding POWER + VOLUME UP BLUE light stays on and puts phone in Fastboot mode
4 -Holding POWER + VOLUME DOWN does nothing (continues to do #1)
Please Help!!!
Click to expand...
Click to collapse
InkBastard said:
Google Sony Developers. Try to unlock your bootloader.
Sent from my D6708 using XDA-Developers mobile app
Click to expand...
Click to collapse
gunz.jones said:
I think the phone will reject the command. Tried on a bricked z3v and that's the response I get from fastboot with the Sony commands given through the developer aite.
Click to expand...
Click to collapse
The phone is not and most likely never will be bootloader unlocked. Planning to buy for another phone is your only option.
I've already moved to a tmo note 4. Not much development there either, but it's nice. Miss the z seires though and may come back to it next year. We'll see how they fair with phones for the next few months state side abs if prices even out on the x or z5.
I fixed mine
I bricked my phone it was just a paper weight Email Me I will make u a video step by step instructions to fix it
[email protected]
carldw said:
I bricked my phone it was just a paper weight Email Me I will make u a video step by step instructions to fix it
[email protected]
Click to expand...
Click to collapse
Unless you're going to post a link or YouTube video we all have access to, wouldn't bother asking people for direct email addresses to send them. That's the reason for PM'S and the forum on general. If you have a fix, we'd all like to know what it is you were able to do that none of us have figured out.
Need to Load Stock ROM
shashikiran said:
got solved? me to have same problem
Click to expand...
Click to collapse
Dear,
You have to load the Stock Rom / Flash it through the tool.
reroot the Phone and try again by clearing Dlavik Cache .
Sorry If am Wrong.
aranda.jc said:
With a Z3v. D6708. I have a problem, got a wrong ROM, the flashee and now not start the phone in any way. The only way to start is "System Recovery" volume + power, which has 4 options: 1. "Continue Power UP", 2. "Safe mode", 3. "Factory Reset" and 4. "Power Down". The thing is try from flashtool but when I give "volume down" and connect the computer does not recognize. When light it even reaches the boot animation. When I give power with USB cable is connected in a loop is vibrating and shows red, blue and green.
I have exactly the same problem of the youtube video.
As it could fix the problem?
Some help ?
Thank you !
Pd. The device only have FastBoot.
Click to expand...
Click to collapse
ok.you power down your phone
---------- Post added at 06:32 AM ---------- Previous post was at 06:21 AM ----------
1-power down your phone.
2-open the flashtool you can chose 32 or 64.almost we chosed flashtool 64.if you can't confirm it.you can oppen your computer and chesk naked (属性) then you will see your computer system is 32 or 64.
3-the new tool version is 0.23 and download it.install it on you computer C .
4Download the D6708 .ftf put it in C. the flashtool will led you. almost I will put it on C/user/.flash/firmwares
5-flash the software will lead you how to use you phone connect you computer with usb .