Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Remove the back cover and find the OFF button, you need to push it with a pencil while holding the power button at the same time until it vibrates or turns off.
PLEASE READ USER'S MANUAL
read this http://forum.xda-developers.com/showpost.php?p=43355247&postcount=2
Ok but i cant go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok but i can go into recovery or power on my phone.again stuck on sony logo
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
You may go into recovery to restore a backup...but not always works. If it keeps getting a boot loop you may need to use flashtool to repair it
Ok but can you give me instructions what to do
Sent from my ZTE Blade G using xda app-developers app
@KiaTheKing try this : in cwm go to storage and mount >> format /system. Then reboot. May this will help you.
Sent from my C5303 using XDA Premium 4 mobile app
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
I cant go in cwm
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Keep the phone turned off. Repair it with PC Companion or Update Service, both are Official Sony tools.
http://www.sonymobile.com/gb/tools/update-service/
Ok thanks i will try if someone has another solution pls post!
Ruchra said me that i must to flah ftf using flashtool can someone help me with this?and give detailed instructions how to flash it and what ftf to flash.thank you for support.
Sent from my ZTE Blade G using xda app-developers app
1) Download correct ftf from general section, general one for your device.
2) turn phone off with power button under the back cover till you get the 3 vibrations.
3) download flashtool and install all the drivers.
4) start flashtool and close PC companion ( if you have this open)
5) plug USB into phone
6) hold volume down and plug USB into pc, ( should get a green light on xperia sp on led for short time)
7) flashtool should identify device attached in flash mode.
8) select flash and use correct tft you downloaded earlier.
You may need to get files ready as phone can then load to Sony logo again after a few minutes. Got to flash it quick. May need to do it 2-3 times before you get the timing right, took me a few attempts. Hope this helps.
Sent from my Nexus 7 using xda app-developers app
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
KiaTheKing said:
Ok. Thanks. I will try it for about 3 hours.can you tell me.when i m in flastool and he regonize my phone do i go to flashmode and then choose my ftf in flastool/firmwares?
Sorry for my bad english!
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
My phone reboots always when computer want to install driver for flashmod? what to do
bez_iom said:
yes you go to flashmod, but then you will need to browse and locate the file on your pc (where ever you downloaded it to) where is says firmwars use the box to the right to move through your drive and find the ftf. You should get something like a drop down list. For myself downloads go into my user download folder.
So long as your phone is turning on that is a good sign.
Click to expand...
Click to collapse
PLS HELP
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
bez_iom said:
The drivers are installed on the pc not the phone.
When the phone is fully off and you connect it yo pc by usb while holding volume down does the led go green for a short time.
Click to expand...
Click to collapse
Yup, and then phone go to sony logo!and when i go flash it says Error in processheader: 31 : A device attached
to do system is not functioning
Error flashing aborted
EDIT: i tried again and it starts to flash now i will se does it works.
Тhank you.You saved my life..
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
KiaTheKing said:
Pls guys help me.I was flaahed rom for .257 fw (i think.it was so fast)on .254.i was stuck on sony logo i can not shut down my phone or do anything(even when i hold power button for about 1min)
can you help me please i dont know what to do)
Really sorry admins for spam.but im scared.im bricked phone????
Sent from my ZTE Blade G using xda app-developers app
Click to expand...
Click to collapse
Can you give some information about your phone.
Specifically the model, FW version and region of your subscription before you messed up.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
bez_iom said:
When mine was stuck on the logo I had a short time between pluging in USB +volume down and it booting to Sony Logo probably about 1-2 minutes. In that time I had to get the flashtool started, it look me a couple of attempts to get the files selected quick enough and ready to flash. Only suggestion is keep trying or move the ftf to flashtool firmwares folder so you can access ftf quicker and not have to worry about finding them.
Click to expand...
Click to collapse
when flashing an ftf file, your phone must be completely turned off, when the flashtool says "connect your device" what you're going to do is hold the VOL DOWN button while connecting your micro-usb to your phone, when you connect the usb to your phone, the green LED light must light and then when the light comes out, that's the only time you'll release the VOL DOWN button.
Glad it worked for you.
Sent from my Nexus 7 using xda app-developers app
Do exactly as follows, and your device will be fine..
first, keep the phone for charging.. that time u will either get a charging notification or a green led will be lit up, when u see either of these two,disconnect the device and it will stay off. Now move to the next step
Visit this link:
http://www.sonymobile.com/us/tools/pc-companion/
Click on Download PC Companion
Run the software and install it
Turn the phone off and disconnect it from the computer
1. No matter what the program says do not connect the phone until you complete step 9
2. In the welcome screen you will see the different modules available for you including the "Support Zone" option. Click on "Start" below it.
3. On the next page Click on "Start" under "Phone Software Update"
At this point if you get an error stating that "Unable to install update components" or "Server is busy" , then please proceed to step 12
4. The program will say that there is no phone connected. Click on the option below that reads: "Repair my phone" the program will issue you a warning about the content that you will lose during the update
5. Choose the option to continue.
6. The program will issue a final message warning you of possible data lost during the update. Click on the checkmark and then on "Next".
7. After that, the program will download the necessary information (5 to 6 minutes) and it will present you with a list of phones.
8. Choose your phones model from the list then click on "Next" then you will see a new section telling you how to connect the phone. (don't connect it yet)
At this point the phone must be off and disconnected from the PC.
9. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.)
Please do let me know if this has worked
Related
Hello!
I read for hours now, bot no luck
I flashed my x10a with flashtool with generic rom.
After flash, as the flashtool says, just turned off and on the phone.
But nothing happened(green led blink one and do a sort vibration, thats all..)
no logo, no sound nothing happens.
I tried to reflash again, but windows says: Cannot recognize the device
In the control panel device manager show "unknown device".
Because of this , cannot reflash with the tool, because it's waiting for the recognized device too..
when i press the back and connect the cable, the green lighting for a minute , and turns of..
Yes, i have the correct drivers(as you can see i flashed before).
Help me guyz, please, if U can
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Try flashing back to stock non root. It may suck but at least you'll have a starting point. It'll read. Ust make sure you have newest flashtool. Just had the same problem with my x10. Its still havin troubles tho.
Stuck using xda app-developers app on a motorola backflip.
THeLogiC said:
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Click to expand...
Click to collapse
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
gyurc said:
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
Click to expand...
Click to collapse
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
luck_shawn said:
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
Click to expand...
Click to collapse
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
gyurc said:
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
Click to expand...
Click to collapse
Hey go back to stock 1st then try rooting later,
1) launch pc companion
2) select support zone
3) now select phone software update
4) then click on repair phone
Now software will download the stock ROM along with stock kernel..
When the software asks you to connect in flash mode, do the following
1) turn off the phone
2) Remove battery
3) Connect the USB cable to phone as well as to the laptop
4) Place the battery back while holding down the back button (3rd button from the left)
5) Green light should glow and the stock ROM and kernel should be flashed automatically..
When it's done you should have a stock unrooted X10, if you want then flash custom Rom after rooting it, be sure to unlock the boot loader if u want to flash custom kernel... Good luck
Sent from my X10S using xda app-developers app
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
gyurc said:
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
Click to expand...
Click to collapse
what do you mean by flashtool cant be done?
try this:
1) open flashtool
2) press the flash button and select any stock ftf firmware
3) now after pop up comes to connect phone in flashmode---- remove battery, connect the phone via usb, and lastly pressing back button insert battery simultaneously.
Now the flashing should start hopefully.
if this doesnt work please post the error you get in flashtool
i have the same problem with my phone only mine is x10i i reflashed 2.3.3. ftf ..like 7..8 times ..and still not working..btw smth the flashtool give me some error ..and other times works and says that the phone was flashed ..but phone still only 1 virbate and 1 blink green light now i am kinda bumped because i repair it once ...and now has the same problem
hello all!
thanks for all help.
What happened:
Hopefully i found the USB port have error. If is stand in half leg, not breathing for a minute and beg for christmas the connection made successfully, and first the SEUS , after the flashtool can recognize the phone well.
Now the phone working perfectly and going to my friend's service for fix the usb port problem.
Hi I'm a noob to the forms as you can see now recently I installed a custom rom on to my xperia now it gets stuck at the Sony Ericsson logo are now I have tried Sony pc companion repair my phone I press the lock button and it restarts I hold down the back button before the Sony logo comes up the pc says it's connected but on the repair my phone it says please plug the device in I have managed the recover the phone once before with Sony pc Companion and it was successful now it's a brick sitting in my draw please help... Thanks... Sam
Sent from my HTC One V using xda app-developers app
Now discovers it was because I forgot to turn usb debugging on.... Another thing in my smash draw ready for tommurow
Sent from my HTC One V using xda app-developers app
SamzWorldOfMusic said:
Now discovers it was because I forgot to turn usb debugging on.... Another thing in my smash draw ready for tommurow
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
Don't destroy it!!
With the following procedure you'll unbrick the phone but unfortunately you will lose all data stored there (the sdcard is not affected though!).
0) Physically disconnect the phone from the USB (if it's connected) and turn it off (remove the battery if it's stuck).
1) Go to Google, search for "Sony Ericsson Update Service" (SEUS) and download it. (I can't post links because I don't have 10 posts yet..)
2) Install SEUS and start it up. It will update itself on first start.
3) Once SEUS is done updating itself, click on "I hereby accept the license agreement" and then click on "Start".
4) Select your phone from the list and then click "Next".
5) While the phone is turned off, press the back button (ONLY!) and keep it pressed.
6) While keeping the back key pressed, connect the phone to the computer (USB).
7) Don't let go from the back button unless SEUS tells you to.
8) Once SEUS detects your phone, click on "Install". Click "Yes" to let it start the flashing process.
9) Wait for SEUS to finish. Do NOT remove the USB from the phone unless the process is completed (it might take a while for it to download the rom and flash it onto the phone).
10) Once SEUS is finished, remove the phone from the USB and start it up (it might take a while to start up).
It will be running on stock 2.1 Eclair ROM, with stock kernel (no root, no cwm/recovery). As good as new!
Please post back with results! Don't destroy the poor thing!
Brick
Hi,
I've installed JB ROM and wanted to rollback.
But now, after hundreds of tries, I can´t install stock KERNEL/ROM. It's a complete brick.
Using SEUS, I get the message that my phone is already updated.
HELP
lmcs said:
Hi,
I've installed JB ROM and wanted to rollback.
But now, after hundreds of tries, I can´t install stock KERNEL/ROM. It's a complete brick.
Using SEUS, I get the message that my phone is already updated.
HELP
Click to expand...
Click to collapse
Look again and you will notice that SEUS gives you the option to proceed anyway.
Just press the button and the process will go on...
Solved
Well, I don't know if SEUS will continue or not.
After some ours trying, I've managed to solve it.
I had to download a stock kernel/ROM and flash it with flashtool. Wasn't easy cause I couldn't find a suitable one. I had to create it.
It's 200mb. If someone wants it, tell me how to post it.
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
imperialrealcs said:
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
Click to expand...
Click to collapse
wrong section !!!!!!!!!!!!!!!!!!!!
PLz post in correct section..........
This is DEV section...............
Request to MOD sent for removeing this thread..........
imperialrealcs said:
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
Click to expand...
Click to collapse
the flashtool popup was a window that asks you which phones drivers to use...in this case, because the XGO isnt listed there you choose the U,Sola,P drivers. Why would you click cancel? I think you didnt know what you were doing there..........
Take the battery out.
Leave for a few seconds.
Hold down vol down
Insert battery, keep vol down pressed
Quickly jam the USB cable in.
You should get back into Flashboot.
XGOs battery isnt removable buddy...
Sent from my ST27i using xda app-developers app
OverdiveKill said:
XGOs battery isnt removable buddy...
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
Use the latest version of flash tool. Install the drivers from flashtool/drivers. had the same problem for me too. use the power vol up key combinations to restart (hold till a vibration) or completely power off (hold till a vibration followed by 3 continuous vibrations).
this solve my problem! using latest flashtool has the driver for xperia go! thanks!
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Moving to right section. Please use search function before open a new thread, and try to post in an existing thread. Disperse information helps to nobody. Regards,
Repair via pcc
Sent from my LT22i using xda app-developers app
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
Go to Computer>Local Disk>Flashtool>Drivers ... and run the program then select the Xperia p driver,fastboot drivers and flashmode drivers...
after that download that ftf file http://forum.xda-developers.com/showthread.php?t=2344987 putting in the Computer>Local Disk>Flashtool>Firmwares directory and then start flashtool ... select the bolt button and after that youre going to see 6.2.A.1.100 Central Europe or something like that .. hit flash to the bottom of tha page ... then wait to load flashing files
when a window come up and tell you to connect your phone press the down volume and hold it then connect usb ..
PM me if it worked , I had the same problem !
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
Is the blue led still on, or is it just stuck in boot loop, or both?
Try to turn it off, long press power | volume up button untill you feel 3 consecutive vibrations.
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
You have to install the drivers first in order to get your phone recognized. Try pressing Vol Up + Power to shut down the phone. Hold it for 10 seconds and then enter fastboot mode and flash using flashtool.
deleted.
Guys my xperia z2 just gone dead, i have read every form and did everything hard rest flash tool xperia companion sony companion and another chinise software.... tired almost every country roms,, it did not dedected by pc it vibrate 3 times shows red led ...when i press power and vol up button it shows blue led and then pc sounds,,that it connects but in flashtool it does not begin the flashing it just give this msg
23/024/2016 15:24:00 - INFO - Starting phone detection
23/024/2016 15:24:06 - INFO - Device connected in flash mode
23/028/2016 15:28:25 - INFO - Please connect your device into flashmode.
23/028/2016 15:28:26 - INFO - Opening device for R/W
23/028/2016 15:28:26 - INFO - Reading device information
23/028/2016 15:28:35 - INFO - Unable to read from phone after having opened it.
please i need valid and help give life back to z2 help meeeee
My CDA is 1281-0195 also i cant find this specific on anywhere on web or flashtool help neeed pleaseee request do something figure out
and it gone sudden death i was using phone in morining i install few apps recently using OLX and then sudden play store stop working error shows up then andriod stop working i restarted the phone then it keeps on stuck on sony and xperia logo thats all
Install the drivers
angel_18panlaqui said:
Install the drivers
Click to expand...
Click to collapse
For your sake I hope you are on unlocked bootloader and if that's the case all you have to do is to flash one of the custorm boot images with recovery, boot to recovery, flash any ROM of your choice. If your bootloader is locked you'll have to unlock it first via flashtool by pressing the unlock button. Hope you'll come right and good luck.
>> Install drivers for Z2
>>Restart your pc..
>>keep z2 unplugged.
>> PLUGIN ONLY WHEN SAYS PLUG IN WITH VOLUME minus.
And then flashed...
Hayeni said:
For your sake I hope you are on unlocked bootloader and if that's the case all you have to do is to flash one of the custorm boot images with recovery, boot to recovery, flash any ROM of your choice. If your bootloader is locked you'll have to unlock it first via flashtool by pressing the unlock button. Hope you'll come right and good luck.
Click to expand...
Click to collapse
24/038/2016 00:38:33 - INFO - Your phone bootloader cannot be officially unlocked
24/038/2016 00:38:33 - INFO - You can now unplug and restart your phone
i have install all drivers its so strange issue even i have got new battery i thought battery is creating issue,but one thing i saw strange today
its charging while sony logo is display with red led,plus it gets heatup from back so to resolve that issue i unplugged the display cable from PCB
to charge fully and now i just finish with charging trying to do as you say it giving me this error just safe me to getting this z2 change into useless dummy
Which flashtool version are you using?
Sent from my D6502 using XDA Premium 4 mobile app
fayez69 said:
Which flashtool version are you using?
Sent from my D6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
0.9.22.1 am using still no progress worked almost non stop 4 hours on this phone to bring it back to life
airbornic said:
0.9.22.1 am using still no progress worked almost non stop 4 hours on this phone to bring it back to life
Click to expand...
Click to collapse
I always use the old version of flashtool as i encountered some errors with new ones.
try this if it works. flashtool-0.9.18.1
https://docs.google.com/file/d/0B3WS5xjTt_0tQTZzQmNiZFc0R2M/edit
michel090428 said:
I always use the old version of flashtool as i encountered some errors with new ones.
try this if it works. flashtool-0.9.18.1
https://docs.google.com/file/d/0B3WS5xjTt_0tQTZzQmNiZFc0R2M/edit
Click to expand...
Click to collapse
But Sir, Question is how shell i make my phone detected by PC first i have tried on several PC's already when i press Power + Vol it vibrate and beeps. Do you think there can be any fault in PCB?
Right now the state is am getting sony logo plus perfect display even battery working only prob is its stuck on bootloop and not getting flashed at all.
This phone really frustrated me alot
airbornic said:
But Sir, Question is how shell i make my phone detected by PC first i have tried on several PC's already when i press Power + Vol it vibrate and beeps. Do you think there can be any fault in PCB?
Right now the state is am getting sony logo plus perfect display even battery working only prob is its stuck on bootloop and not getting flashed at all.
This phone really frustrated me alot
Click to expand...
Click to collapse
First of all the phone needs to be powered on normally without pressing any button comibnation (in your case it is a bootloop).
if flashtools detect the phone and finished preparing the firmware you select, it will ask you to power off the phone and connect it in flash mode. in your case you will need to force power off by pressing voulme up+power till phone vibrates 3 times. after that you disconnect the phone from PC and now you need to start the phone in flash mode: press VOL DOWN while connecting it to PC and then flashtool will start the flashing process.
check your PM's
Yea, try the older version, I also got error on newer one.
Sorry for late reply, got a bit occupied.
And yes, as mentioned above, disconnect your phone, wait for at least 30 seconds, press and hold power+volume up till the time the phone vibrates thrice, now release the buttons and wait for another 30 seconds. Start The flashtool and select the firmware to flash and let it prepare the files, once it asks to connect the phone, connect it while holding the volume down button
Sent from my D6502 using XDA Premium 4 mobile app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
And for a change u can try inserting the main end of USB cable to the port of your laptop /desktop, keep the phone connected to it beforehand. Once I had problem flashing my phone, actually my jack was too dirty, so the cable use to get disconnected because of dirty jack. That worked for me.
Best of luck.
Sent from my D6502 using XDA Premium 4 mobile app
fayez69 said:
Yea, try the older version, I also got error on newer one.
Sorry for late reply, got a bit occupied.
And yes, as mentioned above, disconnect your phone, wait for at least 30 seconds, press and hold power+volume up till the time the phone vibrates thrice, now release the buttons and wait for another 30 seconds. Start The flashtool and select the firmware to flash and let it prepare the files, once it asks to connect the phone, connect it while holding the volume down button
Sent from my D6502 using XDA Premium 4 mobile app
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
And for a change u can try inserting the main end of USB cable to the port of your laptop /desktop, keep the phone connected to it beforehand. Once I had problem flashing my phone, actually my jack was too dirty, so the cable use to get disconnected because of dirty jack. That worked for me.
Best of luck.
Sent from my D6502 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried each and every method mentioned in post i guess its an issue of CDA match with firmware???
My CDA is 1281-0195...major issue am facing i cant find firmware related to that can you help me find a source of this firmware?
1281-0195 D6503 Telenor SE (Sweden)-Black...