Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Moving to right section. Please use search function before open a new thread, and try to post in an existing thread. Disperse information helps to nobody. Regards,
Repair via pcc
Sent from my LT22i using xda app-developers app
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
Go to Computer>Local Disk>Flashtool>Drivers ... and run the program then select the Xperia p driver,fastboot drivers and flashmode drivers...
after that download that ftf file http://forum.xda-developers.com/showthread.php?t=2344987 putting in the Computer>Local Disk>Flashtool>Firmwares directory and then start flashtool ... select the bolt button and after that youre going to see 6.2.A.1.100 Central Europe or something like that .. hit flash to the bottom of tha page ... then wait to load flashing files
when a window come up and tell you to connect your phone press the down volume and hold it then connect usb ..
PM me if it worked , I had the same problem !
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
Is the blue led still on, or is it just stuck in boot loop, or both?
Try to turn it off, long press power | volume up button untill you feel 3 consecutive vibrations.
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
You have to install the drivers first in order to get your phone recognized. Try pressing Vol Up + Power to shut down the phone. Hold it for 10 seconds and then enter fastboot mode and flash using flashtool.
deleted.
Related
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
mertmr said:
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
Click to expand...
Click to collapse
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
gandhar said:
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
Click to expand...
Click to collapse
I even saw and tried that
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
mertmr said:
I even saw and tried that
Click to expand...
Click to collapse
does fastboot work?
singh_dd93 said:
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
Click to expand...
Click to collapse
I did mention that it is a mini pro in the title. Is there any other model info other than "mini pro", i dont know? I only know that it is a x10 mini pro.
I only know about back button thing, now trying the volume down key. Thanks for the tips.
gandhar said:
does fastboot work?
Click to expand...
Click to collapse
Nope, it didnt work too. I will give another shot, i guess.
--------------------
Edit: Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
mertmr said:
Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
Click to expand...
Click to collapse
this is the same computer that you used to flash the kernel right?
gandhar said:
this is the same computer that you used to flash the kernel right?
Click to expand...
Click to collapse
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
mertmr said:
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
Click to expand...
Click to collapse
yeah someone else too had a similar problem.. something about usb3.0
anyway congrats now
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Sent from my Xperia Mini using XDA
singh_dd93 said:
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Click to expand...
Click to collapse
Ok, thanks for the info. I will be carefull about that.
While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I don´t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
imperialrealcs said:
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
Click to expand...
Click to collapse
wrong section !!!!!!!!!!!!!!!!!!!!
PLz post in correct section..........
This is DEV section...............
Request to MOD sent for removeing this thread..........
imperialrealcs said:
i tried to flash .54 firmware via flashtool. however, flashtool pop out a notification that it cant find my phone driver and gave me a list which has all most of the sony phone except xperia go. i clicked cancel and proceed to flash as usual.
after flashing, my phone juz blank. no response at all.
i tried to hold the volume down button and connect to pc. all i get is MTP USB DEVICE with a X on it..
is there any workaround to save my bricked phone? S1 and flashtool doesnt recognize it now
Click to expand...
Click to collapse
the flashtool popup was a window that asks you which phones drivers to use...in this case, because the XGO isnt listed there you choose the U,Sola,P drivers. Why would you click cancel? I think you didnt know what you were doing there..........
Take the battery out.
Leave for a few seconds.
Hold down vol down
Insert battery, keep vol down pressed
Quickly jam the USB cable in.
You should get back into Flashboot.
XGOs battery isnt removable buddy...
Sent from my ST27i using xda app-developers app
OverdiveKill said:
XGOs battery isnt removable buddy...
Sent from my ST27i using xda app-developers app
Click to expand...
Click to collapse
Use the latest version of flash tool. Install the drivers from flashtool/drivers. had the same problem for me too. use the power vol up key combinations to restart (hold till a vibration) or completely power off (hold till a vibration followed by 3 continuous vibrations).
this solve my problem! using latest flashtool has the driver for xperia go! thanks!
Hey Guys!
So I have an Xperia P, and ever since I upgraded to JB, I have been having several problems. The system lags a LOT. I cannot see any pictures in my Album, though the pictures are there, when I try calling someone it lags so much that the process ends. And it lags a lot when I try picking up such that I can't hear what they're saying for upto 5 seconds. Either that, or it just ends
So I've been attempting to flash a custom OS, but I've been facing some problems. I have rooted my Xperia. When I went on the xda forum to get the flashboot drivers, the link is dead. I installed them from another source.
When I turn off my phone and I hold the power up button, the blue LED light comes on and I go to device manager to install the custom drivers from the SDK bundle. By that time, my phone's blue LED light wouldve gone and the drivers aren't installed. At least I don't think it has. Soo I really need your help on installing the fastboot drivers and unlocking bootloader so I can flash a custom OS. Please help.
Thanks in advance
GokuSS1
GokuSS1 said:
Hey Guys!
So I have an Xperia P, and ever since I upgraded to JB, I have been having several problems. The system lags a LOT. I cannot see any pictures in my Album, though the pictures are there, when I try calling someone it lags so much that the process ends. And it lags a lot when I try picking up such that I can't hear what they're saying for upto 5 seconds. Either that, or it just ends
So I've been attempting to flash a custom OS, but I've been facing some problems. I have rooted my Xperia. When I went on the xda forum to get the flashboot drivers, the link is dead. I installed them from another source.
When I turn off my phone and I hold the power up button, the blue LED light comes on and I go to device manager to install the custom drivers from the SDK bundle. By that time, my phone's blue LED light wouldve gone and the drivers aren't installed. At least I don't think it has. Soo I really need your help on installing the fastboot drivers and unlocking bootloader so I can flash a custom OS. Please help.
Thanks in advance
GokuSS1
Click to expand...
Click to collapse
Which Windows version are you using? If you are using Windows 7 then try this:-
Download this ZIP File.
Extract the contents on Desktop
Now Open Device Manager by RIGHT CLICKING ON MY COMPUTER>MANAGE>DEVICE MANAGER
Now connect your phone in fastboot mode to the PC by holding the Vol + button while plugging in the cable.
You will see a new device in the device manager with an error sign on it. Instantly double click on that because it will disappear as the blue LED disappears.
A dialog box will open. Disconnect the phone and dont connect it.
Go to drivers tab
Click on update driver.
Now select BROWSE MY COMPUTER FOR DRIVER SOFTWARE
Now select LET ME PICK FROM A LIST OF DEVICE DRIVERS ON MY COMPUTER
Now select HAVE DISK
Now click on browse.
Open the extracted folder and select the android_winusb.inf
Click OK
Select the ADB driver from the updated list.
Now connect the phone again in fastboot mode again.
And then click on NEXT. You have to do this very quickly because as soon as the BLUE LED disappears the driver will not load but it will show that it is loaded.
Try This, If fails, tell me, will tell you other method.
pass oturse
Never Mind, I got it to work
But thanks anyways!!
I have another problem now. Since I unlocked bootloader, when I turn my phone off, it automatically turns back on, but after the sony kogo appears, nothing more happens, the screen is still in use, a faint light comes off of it, but it's blank and black. I had to wait for it to run out of charge so i could turn it back on. Any help?
What version of JB you got?
Even that'sresolved now... Guess that the custom OS was just starting up
I have one more though... Hopefully the last one! I tried flashing a stock ROM - ICS for Xperia P (LT22i) with flashboot. It prepared the filesand the pop-up came asking me to turn it off, press and hold the flashboot button and connect it to the USB. The blue LED light came but it never flashed. In the log it also came that a flashboot device has been connected. Help please!
Thanks in advance,
Goku
GokuSS1 said:
Even that'sresolved now... Guess that the custom OS was just starting up
I have one more though... Hopefully the last one! I tried flashing a stock ROM - ICS for Xperia P (LT22i) with flashboot. It prepared the filesand the pop-up came asking me to turn it off, press and hold the flashboot button and connect it to the USB. The blue LED light came but it never flashed. In the log it also came that a flashboot device has been connected. Help please!
Thanks in advance,
Goku
Click to expand...
Click to collapse
U pressed fastboot button so blue LED came and it wont flash.........
try entering flash mode by pressing vol down while pluggi in usb u shud get green light den flashing starts...........
Install flashboot drivers before flashing
:good::good:
GokuSS1 said:
Even that'sresolved now... Guess that the custom OS was just starting up
I have one more though... Hopefully the last one! I tried flashing a stock ROM - ICS for Xperia P (LT22i) with flashboot. It prepared the filesand the pop-up came asking me to turn it off, press and hold the flashboot button and connect it to the USB. The blue LED light came but it never flashed. In the log it also came that a flashboot device has been connected. Help please!
Thanks in advance,
Goku
Click to expand...
Click to collapse
Flashing ROM in flash mode not fastboot.
how do i do that?
EDIT: I know, lame question... But I'm new to this stuff
GokuSS1 said:
how do i do that?
Click to expand...
Click to collapse
Hold volume down while connecting to ISB., phone turned off of course.
kalyan_kadari said:
U pressed fastboot button so blue LED came and it wont flash.........
try entering flash mode by pressing vol down while pluggi in usb u shud get green light den flashing starts...........
Install flashboot drivers before flashing
:good::good:
Click to expand...
Click to collapse
Thanks!!!!
sorry I hadn't seen it!
where do i get flashmode drivers from?
GokuSS1 said:
where do i get flashmode drivers from?
Click to expand...
Click to collapse
Install fastboot and flash mode drivers with the installer in flashtool directiry (drivers).
I rooted my xperia p and tried to change the call log with honami phonebook,I added some commands in build.prop,copied another services.jar to system,after 15 mins,my phone powered off and didnt want to power on,just "SoNY" logo and then black screen,no flashboot or fastboot mode,PLEASE help me :'( is it bricked or what?
this is the thread that I followed : http://forum.xda-developers.com/xperia-u/themes-apps/mod-honami-phonebook-v2-light-black-14-t2389777
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
pjohn23 said:
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
Click to expand...
Click to collapse
phone is not detected on pc and can't start phone in fast or flashboot,the LED turns green for 1 or 2 sec than turns red then the phone start (sony logo then black screen)
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
yes do as said on above post. it couldnt be a hard brick. AFAIK hard bricks only occur if you flash something not meant for your device. except in Z series.
matood said:
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Z.Blackbeard said:
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Click to expand...
Click to collapse
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
ChikeD said:
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
Click to expand...
Click to collapse
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Z.Blackbeard said:
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Click to expand...
Click to collapse
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
ChikeD said:
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
Click to expand...
Click to collapse
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Z.Blackbeard said:
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Click to expand...
Click to collapse
you flashed stock firmware?
pjohn23 said:
you flashed stock firmware?
Click to expand...
Click to collapse
I don't understand?! I can't go in flashboot mode,how can I flash with stock firmware ? and does stock firmware means the factory one?
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
pjohn23 said:
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
Click to expand...
Click to collapse
If it doesn't show connected in flash mode in flashtool he cannot flash
Oh, how will he recover his device then? Just trying to help
pjohn23 said:
Oh, how will he recover his device then? Just trying to help
Click to expand...
Click to collapse
Yes it's a problem, but I've seen a few that have managed to fix it by disconnecting the battery.
xperia p has removable battery?
pjohn23 said:
xperia p has removable battery?
Click to expand...
Click to collapse
Nope, u need to open it and disconnect it
You dont need disconnect anything. Your phone is not bricked, its working. The only problem is your drivers, you have to manage install them and it will work. This has been here thousand times.
Sent from my MT27i using xda app-developers app
FIXED IT !! I don't know what happened during the night,but this morning I tried to boot my phone and it did respond !! then I flashed firmware and it worked like charm I was going to try the jig usb as a last hope,but It worked and you were right @matood thank you all for your support