Related
Hi,
I tried to upgrade mi xperia neo to Tweake 1.0 with the recovery, and now dont start.
When i power the phone or plug the charger appears the Sony Ericcson logo and continues there all time.
I can´t enter in flash mode (son i can´t use seus or flash tool), always appears other time the sony ericsson logo.
The bootloader is closed.
Can anyone help me?
Thanks
Are you sure that you are doing the correct procedure to use flash mode on the phone? Here it is:
1. Turn off the phone.
2. Remove the battery for at least 10 seconds.
3. Insert the battery again.
4. Press and hold the "back" button on the phone.
5. While still holding the "back"button pressed connect the phone with teh usb cable to the pc. Flashtool should now recognize the phone.
alekmzn said:
The bootloader is closed.
Click to expand...
Click to collapse
So, there are two ways:
1. flashmode (green LED) have still work, so do as neptun2 advices.
1. Turn off the phone.
2. Remove the battery for at least 10 seconds.
3. Insert the battery again.
4. Press and hold the "back" button on the phone without pressing "power on" button
5. While still holding the "back"button pressed connect the phone with teh usb cable to the pc. Flashtool should now recognize the phone.
Click to expand...
Click to collapse
or
2. if recovery still works, try to do all wipes again (data, cache, dalvik-cache)
Thaks to all.
I can´t access to the recovery, and i don´t see the green led when i plug the cable.
check this out. may be it will help you...
http://forum.xda-developers.com/showthread.php?t=1254409
Cheking, Thanks!
Did u try wotan client ? Its pretty simple and easy to use !, Google it if u didnt already.
Sent from my Xperia Neo using XDA
Moursy93 said:
Did u try wotan client ? Its pretty simple and easy to use !, Google it if u didnt already.
Sent from my Xperia Neo using XDA
Click to expand...
Click to collapse
the problem of Wotan client is that is needed flash mode, so i can´t use it.
Thanks!
At this moment the problem is solved.
It has damaged the trim area, Alejandrissimo support me to repair de problem.
Thnaks to all!
Great notice for you!!!!!
Congratulations!!!!!!!!
alekmzn said:
At this moment the problem is solved.
It has damaged the trim area, Alejandrissimo support me to repair de problem.
Thnaks to all!
Click to expand...
Click to collapse
I'm with the same problem here in my Xperia Neo, it just shows Sony Ericsson, i can't open recovery, can't do hard reset, and can't reset via PC Companion.. :/
@edit
problem solved, i made the bootloader (first time *-*), then i flashed a stock rom by SE, and it worked!
So guys, since I've unlocked the bootloader for my Xperia S (LT26i), installed lotsa custom ROMs and Kernels, and recovered the stock ROM backup, I'm having the same problem:
1 - Can't install Chainfire 3D from market or APK (Not enough space)
2 - It's slow as **** to install something, downloading from market is almost impossible
3 - Everytime I restart, I have my data wiped
If someone knows what's happening, please help me. I've tried recovering my stock rom backup, installed a lot of ROMs, with different kernels, and always having the same problem.
Actually using:
KA09 ROM
SSpeed Kernel v2
EDIT: Sometimes I can't see everything in storage from my computer.
Try factory reset and if this doesn't help flash a firmware using flashtools.
Sent from my LT26i using Tapatalk 2
gm007 said:
Try factory reset and if this doesn't help flash a firmware using flashtools.
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
Factory reset: tried, didn't help
Flash using flashtool: the phone exits flashmode when flashtool starts flashing
HeadbangerBR said:
Factory reset: tried, didn't help
Flash using flashtool: the phone exits flashmode when flashtool starts flashing
Click to expand...
Click to collapse
open flashtool, choose flashmode then a stock rom to flash, connect usb to phone whilst holding vol - ,when flashtool says "device connected in flashmode" pull the usb cable from phone and wait 30seconds or so until it prompts you to connect, so hold vol - button an connect usb, should start now, you can try this at your own risk, has worked for me, infact i have to do this pretty much every time i flash my sxs using flashtool
3stage said:
open flashtool, choose flashmode then a stock rom to flash, connect usb to phone whilst holding vol - ,when flashtool says "device connected in flashmode" pull the usb cable from phone and wait 30seconds or so until it prompts you to connect, so hold vol - button an connect usb, should start now, you can try this at your own risk, has worked for me, infact i have to do this pretty much every time i flash my sxs using flashtool
Click to expand...
Click to collapse
Worked for me too! THANKS MAN!
The phone is 100% working now.
HeadbangerBR said:
Worked for me too! THANKS MAN!
The phone is 100% working now.
Click to expand...
Click to collapse
your welcome fella be sure to hit the thanks button , glad i could have helped, seems an odd thing to have to do but it works, just doesnt seem to fully recognise flashmode on the first connection i think maybe
While updating a new Xperia U to ICS the PCC had an error while flashing the new firmware. Now the screen lights up, the sony logo is shown for ~3-5 seconds and then it reboots.
After that I have been unable to get it recognized again by either PCC/SUS or flash tool.
I also checked my log files in Linux and no device appears.
I've tried 3 different machines (2x Windows 8, 1x Win 7), multiple USB ports. Also leaving the battery out for ~30 mins didn't change the behavior.
The green light for download mode comes on, but after about 5 seconds the light goes out and it goes into the boot loop again.
So by now I believe the device needs to be sent in, but maybe some one has a few more things I can try.
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Try pressing the volume down plus volume up plus power button all 3 simultaneously till u feel 3 vibrations
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
No response, I've tried holding all three buttons for a minute, but it doesn't vibrate after turning on. The only way I can turn it off is by removing the battery.
Min3r said:
Can you make sure the Flashtool drivers are installed ? Go to Flashtool Directory, open drivers directory and start the setup.. Make sure to select the Flashmode and Fastboot drivers are also selected. Then, reboot System and folow this order.
Startt flashtool,select f/w, wait for Flashtool to tell you to connect to device. Then, holding the Volume down button (while phone is switched off), plug the cable into phone (The usb cable must already be connected to PC before starting the Flash Procedure )
The Order is very important.. I had same issue with U (althoguh mine crashed with Flashtool and same as what you observed. When I followed this order, I was able to get it detected and flashed )
Hopefully, you wont need to return to Service Center
let me know how it goes
Cheers ! & Merry Christmas
Click to expand...
Click to collapse
I tried that right now, Flashmode and Fastboot drivers are installed. Flash tool is ready, device is plugged in with volume down pressed, green light comes on. Nothing is found on the PC, after about 5 seconds the green light turns off and the phone shows the sony logo. Green light also comes on if i simply plug in the usb without volume down pressed. So I'm thinking, the download mode has some how been corrupted?
drsanket_xperia_u said:
And yes I forgot to mention
Wrong section
Plz use question n answer section next tym
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Sorry about that, maybe a moderator can move my topic to the right section.
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
drsanket_xperia_u said:
Are u connecting it properly???
Make sure when u connect ur cell to ur pc u have nt presed the power key
keep the phone off
Press the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
U will see green light
Click to expand...
Click to collapse
Exactly what I'm doing and the green light does come on. Except it decides to go into a boot loop after it apperantly boots into download mode but doesn't stay there.
Min3r said:
Darn.. That looks bad.. That did it for me on every occasion. I think you might have a hardbrick due to the interrupted write cycle so I dont think any other way except to take it to Service Center
Sorry I couldnt help
Click to expand...
Click to collapse
That's what I've been fearing. In which case it goes back to the seller in the hope that he will send me a new device.
Moved
Is there any chance of properly reactivating flashmode by using a JTAG?
Cebalrai said:
Is there any chance of properly reactivating flashmode by using a JTAG?
Click to expand...
Click to collapse
Risky business
Jtag. ...used for hard bricked devices n. Seen max to work wid samsung phones only....
Wont recommend u too open up ur xu
Let the service center try first
Sent from my GT-N7000 using Tapatalk 2
Have you manage to recover your phone without taking it to service?
I'm in the exactly same situation... Any help is welcome...
While trying to enter flashmode, green light turns on but after some secs it turns off and sony logo appears on screen. any chance to recover this beautiful brick ?
thanks
After several tries (a lot of...) I manage to enter flashmode and SUS is now reinstalling sony ROM.
Honestly I don´t know how it works this time and not the others but i'm happy with it independently of what happens.
... seems flashtool is detecting ur phone try to flash first the stock kernel and do not wipe everything it shud be in timing though.. onces it is flash charge ur phone in kernel mode (phone is off) then you can flash the stock fw of ur XU.
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 20secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Click to expand...
Click to collapse
No worries. The phone turns off because it doesn't receive any signal from the PC - many people make the mistake of connecting the device in flashmode first, and then they start the flashtool etc.
Instead, load the flashtool first, go to flashmode, select a complete/full stock ftf for your phone (whichever version you want, but do double check if the ftf has kernel.sin file in it) and press the flash button. Only once you get the pop up with the animation telling you to connect the phone in flash mode, connect the phone in flashmode (volume - button pressed when connecting cable). As soon as you connect the phone, the flashtool will start its magic and your phone won't turn off.
if you can go in cwm wipe system then you will only be stuck on sony logo then use this guide http://www.youtube.com/watch?v=hPPWRXcsz7g.....it will work because this same happened to me and i fixed it with this method!
-------------------------------------------------------------------
press thanks if i helped
-------------------------------------------------------------------
using xperia u
locked bootloader
jb experience v2.1 rom
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Moving to right section. Please use search function before open a new thread, and try to post in an existing thread. Disperse information helps to nobody. Regards,
Repair via pcc
Sent from my LT22i using xda app-developers app
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
Go to Computer>Local Disk>Flashtool>Drivers ... and run the program then select the Xperia p driver,fastboot drivers and flashmode drivers...
after that download that ftf file http://forum.xda-developers.com/showthread.php?t=2344987 putting in the Computer>Local Disk>Flashtool>Firmwares directory and then start flashtool ... select the bolt button and after that youre going to see 6.2.A.1.100 Central Europe or something like that .. hit flash to the bottom of tha page ... then wait to load flashing files
when a window come up and tell you to connect your phone press the down volume and hold it then connect usb ..
PM me if it worked , I had the same problem !
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
Is the blue led still on, or is it just stuck in boot loop, or both?
Try to turn it off, long press power | volume up button untill you feel 3 consecutive vibrations.
user1234x said:
Hi,
i was trying to root my Phone, got into fastboot, and now it stuck´s in a bootloop, blue light, i tried flashtool, but it doesnt recognize my phone - can you help me please?
Thanks.
Click to expand...
Click to collapse
You have to install the drivers first in order to get your phone recognized. Try pressing Vol Up + Power to shut down the phone. Hold it for 10 seconds and then enter fastboot mode and flash using flashtool.
deleted.
I rooted my xperia p and tried to change the call log with honami phonebook,I added some commands in build.prop,copied another services.jar to system,after 15 mins,my phone powered off and didnt want to power on,just "SoNY" logo and then black screen,no flashboot or fastboot mode,PLEASE help me :'( is it bricked or what?
this is the thread that I followed : http://forum.xda-developers.com/xperia-u/themes-apps/mod-honami-phonebook-v2-light-black-14-t2389777
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
pjohn23 said:
It couldnt be. try connecting phone in pc in flashmode then flash stock firmware
Click to expand...
Click to collapse
phone is not detected on pc and can't start phone in fast or flashboot,the LED turns green for 1 or 2 sec than turns red then the phone start (sony logo then black screen)
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
yes do as said on above post. it couldnt be a hard brick. AFAIK hard bricks only occur if you flash something not meant for your device. except in Z series.
matood said:
Then install drivers again
Install those from flashtool\drivers folder choose the ones for xperia u,p,sola,go and last 2 optins also, thats fastboot and flash drivers.
Open flashtool and try plug phone in fastboot mode, watch the led, if it start booting remove phone and watch right down on your pc screen to see if its installing. When it finish try again.
This is 99% of these problems...
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Z.Blackbeard said:
Thanks for this but it's not working :/ I tried it already and I tried it after reading your answer,nothing happens. I installed the flashboot and fastboot drivers,and also xperia u,p and sola drivers,everything is good so far,but when I press volume down button and plug my phone,the LED turns green for 2 sec then red then phone starts and nothing happen,also nothing happens in the flashtool screen :/
Click to expand...
Click to collapse
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
ChikeD said:
What windows versioon do you have?
Force power off, press power + volume up untill you feel (1+) 3 vibrations and try.
Try fastboot too and see if there is anything in flashtool log.
Click to expand...
Click to collapse
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Z.Blackbeard said:
I have windows 7 ultimate 64bit, this morning everything was working perfectly (fast and flashboot modes) but now nothing isi going well damn
I tried what u said to me,tried it so many times this day and nothing is working
Click to expand...
Click to collapse
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
ChikeD said:
You had fastboot/flash mode working before and now they don't?
Do you feel the 3 vibrations?
Is it charging when pluged to cahrger when off, or even with sony logo?
Click to expand...
Click to collapse
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Z.Blackbeard said:
yes they were working perfectly,yes I feel the vibration and yes my phone charges for both pc connection and charger and I think that my battery is at 100%
Click to expand...
Click to collapse
you flashed stock firmware?
pjohn23 said:
you flashed stock firmware?
Click to expand...
Click to collapse
I don't understand?! I can't go in flashboot mode,how can I flash with stock firmware ? and does stock firmware means the factory one?
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
pjohn23 said:
if the led is turning green it means you can. but if you dont immeadiately flash stock firmware. it will boot. so you need to prepare stock ftf firmware for your device, choose it, wait for flashtool to tell you to connect your phone in flashmode. then connect your phone in flashmode
Click to expand...
Click to collapse
If it doesn't show connected in flash mode in flashtool he cannot flash
Oh, how will he recover his device then? Just trying to help
pjohn23 said:
Oh, how will he recover his device then? Just trying to help
Click to expand...
Click to collapse
Yes it's a problem, but I've seen a few that have managed to fix it by disconnecting the battery.
xperia p has removable battery?
pjohn23 said:
xperia p has removable battery?
Click to expand...
Click to collapse
Nope, u need to open it and disconnect it
You dont need disconnect anything. Your phone is not bricked, its working. The only problem is your drivers, you have to manage install them and it will work. This has been here thousand times.
Sent from my MT27i using xda app-developers app
FIXED IT !! I don't know what happened during the night,but this morning I tried to boot my phone and it did respond !! then I flashed firmware and it worked like charm I was going to try the jig usb as a last hope,but It worked and you were right @matood thank you all for your support