Ok guys so something really weird happens to me.
1st details about my i9100
Rom: pilotx rom jb 2.3 ,works like 3 weeks.
Lately I had a lot of screen freezes and stucks.
So I just wanted to backup the system before I flash a new rom
Entered to rom manager pro and click backup.
That's it my phone try to restart himself and what's comes it just a weird flickering lights on the screen.
What did I try:
Hard reset with long press home+power= try to restart- this time Samsung logo shows at first and after same weird flickering lights
Recovery= can't access
Download mode= ok
Also try 2 take out the battery for 5 minutes= nothing!!
Have to bold that I have this brick bug so...
Thanks for all of you...
You say you can get into Download mode?
So flash with Odin a non emmc bug firmware. Am I wrong?
liransh said:
Ok guys so something really weird happens to me.
1st details about my i9100
Rom: pilotx rom jb 2.3 ,works like 3 weeks.
Lately I had a lot of screen freezes and stucks.
So I just wanted to backup the system before I flash a new rom
Entered to rom manager pro and click backup.
That's it my phone try to restart himself and what's comes it just a weird flickering lights on the screen.
What did I try:
Hard reset with long press home+power= try to restart- this time Samsung logo shows at first and after same weird flickering lights
Recovery= can't access
Download mode= ok
Also try 2 take out the battery for 5 minutes= nothing!!
Have to bold that I have this brick bug so...
Thanks for all of you...
Click to expand...
Click to collapse
Do you know for sure that you have the insane chip (it's a piece of HW) ?
Try to get in touch with mobile through Odin PC before you begin to cry
If success getting access through Odin, then try to flash a stock 4.0.3 firmware.
If you still can't flash it properly AND you indeed have the eMMC bug ... you might still be able to flash stock 4.0.3 firmware at the cost of some lost SD memory (search XDA ...)
Odin doesn't recognize my device, so I am afraid that I have this brick bug...
So how exactly I going to flash the stock rom
liransh said:
Odin doesn't recognize my device, so I am afraid that I have this brick bug...
So how exactly I going to flash the stock rom
Click to expand...
Click to collapse
You can get into Download Mode but Odin doesn`t recognize your phone?
Have you installed the USB Drivers?
Scarface1991 said:
You can get into Download Mode but Odin doesn`t recognize your phone?
Have you installed the USB Drivers?
Click to expand...
Click to collapse
I thing I have them cause I have kies
liransh said:
I thing I have them cause I have kies
Click to expand...
Click to collapse
If you can get into Download Mode then:
- Disconnect phones USB cable
- Kill any KIES process
- Start Odin
- Restart phone and go into Download Mode
- Connect cable
- Wait a minutes until Odin show it is connected
- Flash away
On XDA there is a lot of guides showing how to do this
This one might help you Fix an unflashable or soft bricked GSII :good:
It's NAND rw corruption, you don't have a kernel what can perform read/write action, you have formatted /system. Find Phistachio guide how to recover your phone. Good luck.
P.S. I've got same trouble :'(
liransh said:
Ok guys so something really weird happens to me.
1st details about my i9100
Rom: pilotx rom jb 2.3 ,works like 3 weeks.
Lately I had a lot of screen freezes and stucks.
So I just wanted to backup the system before I flash a new rom
Entered to rom manager pro and click backup.
That's it my phone try to restart himself and what's comes it just a weird flickering lights on the screen.
What did I try:
Hard reset with long press home+power= try to restart- this time Samsung logo shows at first and after same weird flickering lights
Recovery= can't access
Download mode= ok
Also try 2 take out the battery for 5 minutes= nothing!!
Have to bold that I have this brick bug so...
Thanks for all of you...
Click to expand...
Click to collapse
AFAIK you cant use Rom Manager on our GS2 so sounds like you tried to flash a kernel via it first and now system wont boot.
Just simply go into download mode and flash latest Siyah kernel and it should boot after that.
bkjugg said:
It's NAND rw corruption, you don't have a kernel what can perform read/write action, you have formatted /system. Find Phistachio guide how to recover your phone. Good luck.
P.S. I've got same trouble :'(
Click to expand...
Click to collapse
Bkjugg tnx,
I use the pistachio guide as u said and now my phone back to live....
I really afraid of this brick bug...I just download the "got brick bug" app and its says that my phone is known to have the brick bug.
Related
Hey,, I recently got my galaxy s2 and im new in the android thing,, i want to flash my phone to litening rom but im worried that i might brick it,, what are the chances that i may brick my phone? tnx and more power
The risk is very small as long as you follow the instructions to the letter. Read from start to finish a few times before doing anything and double check everything. It's actually all very easy and straightforward
Edit: and have a look at the thread about backing up your EFS folder before flashing (you'll need root) it's in the dev section somewhere.
Sent from my GT-I9100 using XDA Premium App
99% chance of no problem rising to 100% chance of a brick if not following instructions .
Recover from a bricked phone = 99% success rate .
jje
JJEgan said:
99% chance of no problem rising to 100% chance of a brick if not following instructions .
Recover from a bricked phone = 99% success rate .
jje
Click to expand...
Click to collapse
^^^^^^^^^^^^^^^^^^^^^^^^ THIS
But how hard is it to really brick a SGS2 ?
I think i read about 1 person who couldnt get his phone up and running again .
SGS2 i belive is really hard to brick.
Sorry for my bad english
There are enough who totally brick a phone in the course of a year . But its hard to do plenty of oh hell moments but recovered flashing stock rom .
Brick tends to be a misused term SGS brick means it should work after flashing stock rom via odin . Other phones brick means dead phone return to factory no hope .
jje
As long as you never tick "Re-Partition" and insert the PIT in Odin its almost imposable to brick unless you somehow nuke the bootloader(which you shouldn't be able todo via flashing custom roms).
I dont even think theres much of a chance of radio bricks, worst that happens is that you have to re-flash.
veyka said:
As long as you never tick "Re-Partition" and insert the PIT in Odin its almost imposable to brick unless you somehow nuke the bootloader(which you shouldn't be able todo via flashing custom roms).
I dont even think theres much of a chance of radio bricks, worst that happens is that you have to re-flash.
Click to expand...
Click to collapse
I think once the radio is corrupted a new flash is impossible, well it is on HTC devices
[email protected]
Sent from my Samsung Galactic Crusader S II
tnx guys for the reply,, will follow the instruction carefully,, hope everything will be ok,,
Is it possible to recover from a bricked phone?
svj1187 said:
Is it possible to recover from a bricked phone?
Click to expand...
Click to collapse
As long as one of the (secondary) bootloaders is still intact and you can get into download-mode (maybe by using the USB jig), then yes.
JupiterdroidXDA said:
I think once the radio is corrupted a new flash is impossible, well it is on HTC devices
[email protected]
Sent from my Samsung Galactic Crusader S II
Click to expand...
Click to collapse
Nah, just flash the modem and all is good.
sadly,am new to android !! I read a forum in d web tat asked to load a file in pit for lightening rom and i bricked d device. Now its in service centre,hope it comes back alive
santhoshkcsk said:
sadly,am new to android !! I read a forum in d web tat asked to load a file in pit for lightening rom and i bricked d device. Now its in service centre,hope it comes back alive
Click to expand...
Click to collapse
If the service centre can't fix (when I sent mine to one they told me it was beyond economic repair) don't lose hope as this guy will probably be able to repair it for you: http://forum.xda-developers.com/member.php?u=1602851
Ended up being cheaper than if my local service centre had been able to repair it too.
Being new to flashing I was also very scared at the start. I was pulling my hair out when the first time I flashed a new rom and got stuck in a boot loop. Luckily I backed up the entire system and I was able to restore.
Make sure you do a back up of your system first.
The first time its scary, I had no nails after the first flash lol. But after that its fun, just make sure to read everything and follow the instructions to the letter.
Good Luck!!
Sim card not recognized
I have rooted by galaxy s2 and my phone fails to recognize the sim card and unfortunately I didn't backup my original rom to restore the previous settings
I tried various things: hard reset, install alternative (custom) roms all seem to have no effect on the sim card.
I am getting quite frustrtated with this, is there an original ROM for my location (GREECE, VODAFONE) to try with odin ? I should note that my mobile seems not to connect with the PC when I try to connect it via kies (odin works instead)
Is there a possibility that the phone's card sensors are physically damaged, thus return it for repairs ?
Thanks for your time
Hi,
I have a Galaxy S2 i9100.
I was using ODIN to update de OS but I left checked the RE-PARTITION
box and now it´s dead.
I think that I erased the main memory so I can´t turn it on, no
charge, no nothing.
I couldn´t even enter in Download mode.
So I think it needs a hard reset... can you help me?
same problem if some one can answer this i will be happy
rocholaroca said:
Hi,
I have a Galaxy S2 i9100.
I was using ODIN to update de OS but I left checked the RE-PARTITION
box and now it´s dead.
I think that I erased the main memory so I can´t turn it on, no
charge, no nothing.
I couldn´t even enter in Download mode.
So I think it needs a hard reset... can you help me?
Click to expand...
Click to collapse
was using odin with checked re-partition and now its dead
is there any way to fix it?
the phone is 2 days old i dont think the store will take it back becasue of the rooting and rom changing
A JTAG repair is the only thing that can fix it I believe.
SGS2 - Download mode but no recovery
Hi!
I have a bit of a problem here as well when i was trying to flash back to the stock firmware. Now when I try to get to the clockwork recovery mod, I get the famous dead screen with symbols of mobile phone, exclamation point and a pc. I have been searching solution to this problem for hours now, and still I don't want to quit.
My previous custom rom was installed in with no problems. Litening rom 3.0.
Now, with usb jig i can get into the download mode, no problem there. It just seems that the traffic is just jammed.
Download mode works but Odin doesn't transfer anything. Gets stuck on the factoryfs.img while i'm trying to flash. Kies doesn't recognize the phone but pc recognizes the USB device with no problem. Original stock firmware doesn't load on the phone. Odin just stops transferring.
Things I've tried so far.
-Reflash (both litening rom again and stock firmware) with odin (Kies is not on while I do this, I checked)
-Kies (doesn't work)
-Download mode does work but it seems that phone doesn't accept any files.
-I tried the one-click unbrick which seemed to do something god but failed at the end.
What could I still try? I'm running out of options now.
I apologize for my bad english.
Hi,
I have a samsung galaxy player 5 international version (YP-G70CW). I wanted to upgrade to Gingerbread, but my attempt failed.
I put it into download mode and started up odin, trying to flash this kernel: http://forum.xda-developers.com/showthread.php?t=1414565
It got stuck on "Setup connection...". I now realize it was probably because I didn't shut down the kies process running in the background (which really should be included in the guides).
nyway I tried it a few times more, but then gave up and held down the power button to exit download mode. I'm now stuck in this mode only showing a "Phone ! computer" image every time I try to restart the device, and I cannot get it back into download mode. Odin recognises the device and I didn't really flash anything onto it so I would think it would still be good?
I read somewhere else that to fix it you should take out your battery and sim card for a while and try again. The Player 5 cannot easily be opened to get to the battery though, so is there another way to get out of this mode?
I've tried looking for an answer but come short. Would really appreciate some help.
Thanks
star85 said:
...
"Phone ! computer"
....
Click to expand...
Click to collapse
This is also download mode...
If you flash a gingerbread kernel( I think rj's is gingerbread only?), I do not think it will boot a froyo rom. I would suggest that you flash one of the INTL ROM's(or mine) along with rj's kernel.
Haha I feel stupid But great answer. Thank you!
Yea I was going to flash your ROM, but it said in your guide as the first step to flash that kernel first. Gonna try it now.
star85 said:
Hi,
I have a samsung galaxy player 5 international version (YP-G70CW). I wanted to upgrade to Gingerbread, but my attempt failed.
I put it into download mode and started up odin, trying to flash this kernel: http://forum.xda-developers.com/showthread.php?t=1414565
It got stuck on "Setup connection...". I now realize it was probably because I didn't shut down the kies process running in the background (which really should be included in the guides).
nyway I tried it a few times more, but then gave up and held down the power button to exit download mode. I'm now stuck in this mode only showing a "Phone ! computer" image every time I try to restart the device, and I cannot get it back into download mode. Odin recognises the device and I didn't really flash anything onto it so I would think it would still be good?
I read somewhere else that to fix it you should take out your battery and sim card for a while and try again. The Player 5 cannot easily be opened to get to the battery though, so is there another way to get out of this mode?
I've tried looking for an answer but come short. Would really appreciate some help.
Thanks
Click to expand...
Click to collapse
I'm not sure if this will help you but it helped me with my Lg Optimus E900 ... You camera button is stuck that's what's causing the problem every time you restart phone ...
hey,
prehisory:
last night, my phone were somewhere in my bed, cus i fell asleep. the wohle night i'm charging my phone always.
(happened a few times, but i think this time i slept over my phone)
next morning i woke up, picked up the phone & wanted to use it, but it got a freeze screen, was medium-temperatured (not more than a little gaming).
didn't thought anything bad, i pulled out my micro usb charger and forced a restart by contiounsly press power.
problem now:
it booted up as normal but it took really longer than usual. it seemed to freeze sometimes during boot, sometimes i canceled booting, and tried another time..
really really strange behaviors happened, but after a long time just let the phone boot, i got dropped to my homescreeen. all was looking good except the whole status bar just wasn't there. damn.. but ok, tried another 1-2 boots, to see if it get stable after a while but that doens't changed anything..
i can't eitgher get into CWM, just into download mode.
ideas?
i thought overheated but i guess that my phone either would'nt boot up (cpu burned) or stays at black screen (gpu burned)?
so i tried getting into CWM which doesn't worked. then i flashed official samsung ics via odin -> boots up till the coulorized "S" appears, stays in this state, and keep bootlooping (see this when the animation starts by this kind of flowers again)
tried another older stock rom, the same. stock kernel, the same, cf-root with CWM4, the same, i cant even then get in CWM..
any idea??
i'm goin crazy on this.. too much money wasted if this wont work -.-
...........
cabloomi said:
flash a rom like hydrog3n rom, it doesnt need you to fully wipe so most likely you wont get a boot loop, once youve tried that, post here and ill reply
Click to expand...
Click to collapse
Which part of "i can't eitgher get into CWM, just into download mode. " did you not understand?
OP:
Just flash a ICS rom for now and later you can try to see if it works or not. (CWM)
Have a good day.
Can you get stock recovery?
From Odin flash cwm, not the CFRoot one. than try it, strange you can get download mode but not recovery.
You have to wipe to get rid of boot loop
Sent from my GT-I9100
beston94 said:
Which part of "i can't eitgher get into CWM, just into download mode. " did you not understand?
OP:
Just flash a ICS rom for now and later you can try to see if it works or not. (CWM)
Have a good day.
Click to expand...
Click to collapse
Unfortunately the poster that replied never bothers to read the OP and just shoves out any old nonsense .
jje
so, finally i got it back,
did this howto: http://forum.xda-developers.com/showthread.php?t=1457458
so now i'm back on stock ICS samsungs rom.
flashed the suitable CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5.tar
but now i can't access the CWM menue, by pressing power, vol up, home
?
When you say you can't access recovery, what's happening?
PROBLEM SOLVED
YOU FORGOT TO USE THE HOME KEY
1. Put 1 finger on home
2. Put 1 finger on volume up
3. Put 1 finger on top of power
4. Press them all together, and as soon as you see the anything on the screen, let go of everything
>>>>next time try to look up a guide on how to get into cwm recovery<<<<
cabloomi said:
PROBLEM SOLVED
YOU FORGOT TO USE THE HOME KEY
1. Put 1 finger on home
2. Put 1 finger on volume up
3. Put 1 finger on top of power
4. Press them all together, and as soon as you see the anything on the screen, let go of everything
>>>>next time try to look up a guide on how to get into cwm recovery<<<<
Click to expand...
Click to collapse
i did, it doesnt accessed cwm. never mind tryin around solved it.
now all fresh installed off samsungs official, but it isnt as good as before:
still slow bootup, and my status-bar is missing after booting (using latest miui which i also had before this problem, so formerly it was working)
after bootup, touch keys and all other won't response, so if bootup to lockscreen -> wait til screen goes off -> u cant wake the phone, or u have to wait a while maybe it light up for some reason.
any ideas?
hardware damage? i hope not..
no i think you need a good wipeing. but you need to find a way to get into download mode, dont give up try it 3 more time's, dont keep pressing the after the buttons logo apears
try this or its hardware............ you do any deviation and you are on your own.
remove your external sdcard and dont put it back until you are sure your phone works
as per your above post you can access cwm
1: format data / cache / system / sdcard or emmc [system is a must]
2: format preboot / boot [cwm 5.5 or some alternat if option available]
3: download stock i9100 ROM from checkfus (prefer) or sammobile
4: flash using odin, after first boot dial *2767*3855#
5: do not sign in, use for half hour or so, if you think it works sign in to google.
6: do not restore any thing, no titanium backups/restores
7: do not put your sdcard
if your phone works now you know its not hardware now do whatever
thanks mate you strength my opinion and hope that it isn't hardware.
i already had an stock ICS samsung rom on it, with sd mounted all worked fluently and well. (LPH rom). so i flashed a suitable CF-root with CWM, get in there, flashed custom ROM (latest miui + siyah kernel, the same combination i used for month and it worked).
so but what causes these problems i have? before it was fast booting and stable, now slow and the status bar is missing, the rom wont boot up in a normal way, i have to "bully" my phone while boot that i can see the desktop..
?
And your problem suddenly changed!
Custom ROM issues, download again, download something else, wipe, flash again.
Sent from my GT-I9100
atifsh said:
And your problem suddenly changed!
Custom ROM issues, download again, download something else, wipe, flash again.
Sent from my GT-I9100
Click to expand...
Click to collapse
yes it seemed like that, but i cant understand why it happened over night? i didnt used the phone and whoos! i woke up and all's screwed up? <,< d**m
Next time be clear, no problem on stock means, no problem but user problem.
Sent from my GT-I9100
atifsh said:
Next time be clear, no problem on stock means, no problem but user problem.
Sent from my GT-I9100
Click to expand...
Click to collapse
it changed, as i wrote before.
btt any ideas?
Good evening,
I was performing a perfectly normal factory reset in CWM tonight, when it froze while formatting data. Then screen went blank. Tried to reboot, nothing. No recovery mode or download mode using three button combos.
I was trying a new ROM (Omega Black-Blue), but decided to revert to my backup of HydrogenICS. It was during the wipe prior to restoring the backup that the problem occurred.
I have Siyah v3 running, and have had not problems in the past.
Any ideas anyone??
did you try removing your battery keep sometime out and try again 3 botton Combo for DL mod
if you can get a full charged battey also try the same..
get your battery out of the phone , and i think you didnt wip system , so you can enter recovery and enter download mode also , i think it is battery proplem happened to me once and i though my phone is dead but after recharging my battery in onether s2 phone for 1 hour and get it back in my phone , all goes fine
first you should try to change the battery, if that doesn't work,
open Odin in the pc, and then try to get into download mode as you would normaly,
except for this you wont see anything on your phones screen, now press volume up
plug it into pc, and see if odin reads it, if it does, try to flash to stock from there,
i know this from experience, it happend to me on my galaxy note
How could it be a 'Good Evening' if you have just bricked your phone?
Try using USB jig..
I had the same problem with my Galaxy S. I tried, charging the battery, replacing the battery with a charged one, download mode, power flushing using all buttons etc. Nothing worked. USB thing did... So why not give it a shot. if nothing works, then just give to Samsung, they will replace it for you.
Cheers
- me!
Don't go making promises around things you have nothing to do with.
If you don't get to go back to stock & reset the flash counter before you send it to Samsung, the experience on here over the past 6 mths has been 50/50 they ignore it & give you warranty service or replacement/they make you pay for it.
It is very much the luck of the draw/dependent on who looks at the phone, Samsung policy is to refuse warranty service in situations like this.
svarma241 said:
if nothing works, then just give to Samsung, they will replace it for you.
Cheers
- me!
Click to expand...
Click to collapse
I have the same issue, in this thread, somebody tried different batteries, jig and I have tried blind connecting the phone to odin... no luck
http://forum.xda-developers.com/showthread.php?t=1555259&page=515
i'm having the same problem.
been on hydrogenics with siyah. tried to do a fullwipe to reinstall the system. but it froze at "format data"... i tried several times but it never finished "format data". then i tried to restore a nandroid backup. which didnt work too. then i unplugged battery. after that no turning on anymore...
might this be a problem with siyah and hydrogenics?
pmcee said:
i'm having the same problem.
been on hydrogenics with siyah. tried to do a fullwipe to reinstall the system. but it froze at "format data"... i tried several times but it never finished "format data". then i tried to restore a nandroid backup. which didnt work too. then i unplugged battery. after that no turning on anymore...
might this be a problem with siyah and hydrogenics?
Click to expand...
Click to collapse
Siyah has a lot of bugs atm.. it bricks phones lately ._.
Azure Flame Kite said:
Siyah has a lot of bugs atm.. it bricks phones lately ._.
Click to expand...
Click to collapse
i'm a total neak fanboy... oh god why did i have the urge to try out siyah... why change a running system... damn myself!....
pmcee said:
i'm a total neak fanboy... oh god why did i have the urge to try out siyah... why change a running system... damn myself!....
Click to expand...
Click to collapse
Siyah also bricked my internal SD card's ability to properly install ROMs Thank God for external SDs
**** happens
Azure Flame Kite said:
Siyah also bricked my internal SD card's ability to properly install ROMs Thank God for external SDs
**** happens
Click to expand...
Click to collapse
so how do i get my phone back working? the silent download mode doesnt work. i'm looking for my usb jig but i cant find it...
pmcee said:
so how do i get my phone back working? the silent download mode doesnt work. i'm looking for my usb jig but i cant find it...
Click to expand...
Click to collapse
My wisdom is very limited due to me being new to rooting and stuff ._.
But yeah, USB jig is your friend.
Yes, same scenario, the only difference was that I was using MIUI and Siyah. it bricked my device (mmcblk0p10 , or i should say, data partition) is dead.
kazuni said:
Yes, same scenario, the only difference was that I was using MIUI and Siyah. it bricked my device (mmcblk0p10 , or i should say, data partition) is dead.
Click to expand...
Click to collapse
please tell this in the siyah thread also...because they start to think its a hydrogenics problem...
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
bigallo said:
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
Click to expand...
Click to collapse
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
xSpeced said:
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
Click to expand...
Click to collapse
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
bigallo said:
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
Click to expand...
Click to collapse
What happens when you try to boot into CWM?
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Mika83AC said:
What happens when you try to boot into CWM?
Click to expand...
Click to collapse
Notthing, if i hold VolumeUp+Home+Power the phone doesn't turn on, neither on logo screen
holdz said:
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Click to expand...
Click to collapse
I can't use Odin cause when i plugin the phone (in download mode) Odin and the whole PC can't see it. I have win8, i don't know if that's a problem for Odin or something.
Is there a way to check if i have driver/odin/any working without using the phone?
Is there a way to check if i have driver/odin/any working without using the phone?
By plugging another SGS3 in is all .
jje