My Mobile Screen is blank and is not turning on. It happened by it self, I was not upgrading nor charging. Only thinking I can tell is that when ever I'm charging it is showing RED light instead of Yellow. If I remove the battery and put it on cardle to charge, cardle will show that the battery is Full by GREEN Light.
I hope it can be fixed. Would appreciate if some one can help me ASAP.
Thankx in advance
try softreset
try hardreset
try leaving the batt out for a long time
I tried all that but still same. Neither Soft nor Hard reset or taking the battery out. Nothing on the screen, its blank.
Unfortunely i having the same problem, i suspect the backup battery problem ....
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
jspasatc said:
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
Click to expand...
Click to collapse
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?[/quote]
I sent my hima to a service repair center to check the soldering on the mainboard. It's not an authorized repair center, as there's none in Macedonia, it's a place for repairing digital cameras and stuff. It's the place where they changed my bottom connector few months ago, so I thought that the problem might be in the connector soldering (something loossened or something) but , I was told yesterday that the hardware seems ok and there's no problem whatsoever with the connectors and the m/b. This is how it all started:
My problem started a week after I upgraded to tofclock's 2k5 2.01wwe, and after altering the shell.exe file and the registry in order to get the clock shown in the title bar instead of the battery indicator. So after couple of days enjoying the 2k5, one morning my phone turned off, and I couldn't power it. I tried soft reset, tried hard reset, nothing. So I thought I should reflash it, but I couldn't enter b/l mode. I try leaving the battery out for some time (couple of hours) and when I place it back, the screen turns on, just a plain white light for about 15 seconds, and then turns off again. If I try hard reset, the screen lights up again (white screen, no image or anything) and after 15 seconds turns off and so on. I noticed that when the screen lights up after hard reset, if I place the hima in the cradle, the white screen stays on for 3 minutes, and this was exactly my settings in the power management(15seconds on battery, 3 mins on craddle), and the led light in the upper right corner is yellow, and after some time, it turns to green, as in battery charged. Active sync doesn't recognize the phone, I can't get serial screen, and nothing other than what I described in this post. I've tried hundreds of times the entire procedure, but nothing still.
Any ideas. Thanks,
J.
Latest news:
After many attempts to enter b/l, I wasn't successful. Now I placed the device in the cradle, the screen turned white as usual, the amber light turned on, and I received a message in the system tray in my pc the a new hardware was detected, and that XP is instaling..... After that, I received a message that the new device is Windows based Mobile Device.
And then, xp created a new LAN, but , it shows a limited or no connectivity.
why is this happening? And what is happening?
the pda show up as shuch if it's ready to receive a rom from the rom upgrade
But still, when I start himaupgradeut_noid.exe I get error 101, connection error
Note that I only get ehite blank screen, and not serial v1.06/usb v1.06, like I had before my last upgrade to 2k5. perhaps the b/l is corrupted or something?
cheers,
J.
hi guys,
Is this the backup battery we need:
http://www.ipaqrepair.co.uk/view_product.php?product=375
Please advise,
10x,
Jordan.
While I was charging my phone, I noticed the LED notification was not on. I checked the settings and it's still enabled. The LED didn't react even when I received notifications. I thought perhaps the LED died somehow, so I restarted my phone to see if it would turn on at all.
The LED lit up in a blue color during the entire restart process. However, it remains unresponsive for everything else.
Anyone else experienced this? I'm guessing it is a software issue.
azngtr said:
While I was charging my phone, I noticed the LED notification was not on. I checked the settings and it's still enabled. The LED didn't react even when I received notifications. I thought perhaps the LED died somehow, so I restarted my phone to see if it would turn on at all.
The LED lit up in a blue color during the entire restart process. However, it remains unresponsive for everything else.
Anyone else experienced this? I'm guessing it is a software issue.
Click to expand...
Click to collapse
had same issue then i went in to recovery and wipe cache and rebooted it was working so not sure if itll work but it cant hurt
Anyone has any idea what I could do with the following.
Device turned off while in water. 3 weeks later, I plugged the device in a charger. The red light was blinking in the top left corner. I left it plugged in for maybe 15min. The screen cycled between the red lightning bolt in a circle, and to a green one. Briefly on green it would turn off, and eventually show the red one again. 15min or so later I went into fast book mode. It said something about RPL being locked. I shut it down, went in eRecovery instead. From there I did a shutdown. And then tried to start the phone. Low and behold it turned on. I plugged it in my computer but the charging showed 2%. So I turned off the device and left it plugged in for the night. This morning, the device didn't start. No red blinking light when trying to charge it, and no fast boot, nor eRecovery.
any idea?
I really don't get it. Does the Mate 10 Pro have 2 different memories that could work independently? I was able to get it to wake up, and tried to get into fastboot. What I got instead is a "Software Install Failed" message with a URL to emui.com that is as useful as a thumb in my forehead. When trying eRecovery, I tried, wipe cache partition, didn't change anything. I tried reboot system, brings me back to eRecovery, so I tried Download latest version and recovery. It connects to my wifi (how on earth does it finds the password?!?) and downloads a 3099M bundle (8.0.0.143). Then runs the recovery system. I get a Recovery Success screen, then reboot. Guess what? Goes back to the same eRecovery screen. I can't get it to normal boot at all. And shutdown? Well.... that's the mystery. If I do shutdown. Then when I try to start the phone, screen stay black. Like the last time. Not sure what I did to get it back.
Hi,
I'm facing the problem with dark mode in Realme XT. When I turn on dark mode during charging the phone with vooc, it appears some black lines keep blinking all the time but if I turn to default mode or unplug charger, it's normal. I tried to change my charger (only the cable) and factory reset, still not solve.
I have a video file but I m new here so I cannot post that.
Is it because of my hardware or the software itself.
Any comments?
Hi everybody,
I am facing a strange situation with my GTS 1 : since my last recharge, my screen stays dark; if I long-press the button, the amazfit logo appears but then it turns black again.
If I plug it to charge, the screen appears and it goes on charging until 100%, then it stays with the screen working for a while, but if I try to change the watch face (or sometimes, also to "find the watch" with the Zepp feature) it goes black again. To make it even worse, sometimes it just goes black and freezes after a while I am wearing it, and the only way to revive it is to plug it to charge again.
I tried to factory reset, to reinstall firmware and resources (with Notify app: Zepp does not detect any update) , and I am starting wondering that the battery could be somehow defective (I bought it two years ago...) - any hint from you experts, or anything I could try to understand what is wrong? Thanks in advance!