My Mobile Screen is blank and is not turning on. It happened by it self, I was not upgrading nor charging. Only thinking I can tell is that when ever I'm charging it is showing RED light instead of Yellow. If I remove the battery and put it on cardle to charge, cardle will show that the battery is Full by GREEN Light.
I hope it can be fixed. Would appreciate if some one can help me ASAP.
Thankx in advance
try softreset
try hardreset
try leaving the batt out for a long time
I tried all that but still same. Neither Soft nor Hard reset or taking the battery out. Nothing on the screen, its blank.
Unfortunely i having the same problem, i suspect the backup battery problem ....
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
jspasatc said:
how do we change the backup battery?
can we do it by ourselves/non-professionals?
what type is the backup battery?
Where can we order from?
I am also having the same problem, perhaps someone can shed some light?
thanks,
J.
Click to expand...
Click to collapse
1. Yes you can change the backup batt by youselves. You'll need to unsolder two contacts from the mainboard
2. Bat. type is Maxell ML2016T17
3. Do not know where to order (here in Russia it to hard to find such type of the backup battery).
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
jspasatc said:
Spasiba Uvea
But can we be sure that the problem is in the backup battery. Because I have the same problem, I am unable to start my hima, and when I try hard reset or soft reset the screen just lits white and stays white for 15seconds, and if I put it on a craddle, it stays lit for 3 minutes (these are the values I had set in the power management). Other than that, and the yellow led light showing that the hima is charging, I'm unable to do anything at all. I am not even able to clean the registry hive (by pressing camera,record and reset button) nor even enter bootloader mode(d-pad, power button and reset)
Just as I'm typing, the yellow led light in the corner turns green, telling me that my battery is full. And that's it
I'm all ears and eyes guys, thanks,
J.
Click to expand...
Click to collapse
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?
No this is not a backup battery problem 100%.
Seems that something wrong with the screen and connection of the screen to a motherboard. You can try to disassemble your Hima and check the screen connection.
Some question(s) to identify you problem?
Are you able to create a connection with activesync while hima is in craddle?[/quote]
I sent my hima to a service repair center to check the soldering on the mainboard. It's not an authorized repair center, as there's none in Macedonia, it's a place for repairing digital cameras and stuff. It's the place where they changed my bottom connector few months ago, so I thought that the problem might be in the connector soldering (something loossened or something) but , I was told yesterday that the hardware seems ok and there's no problem whatsoever with the connectors and the m/b. This is how it all started:
My problem started a week after I upgraded to tofclock's 2k5 2.01wwe, and after altering the shell.exe file and the registry in order to get the clock shown in the title bar instead of the battery indicator. So after couple of days enjoying the 2k5, one morning my phone turned off, and I couldn't power it. I tried soft reset, tried hard reset, nothing. So I thought I should reflash it, but I couldn't enter b/l mode. I try leaving the battery out for some time (couple of hours) and when I place it back, the screen turns on, just a plain white light for about 15 seconds, and then turns off again. If I try hard reset, the screen lights up again (white screen, no image or anything) and after 15 seconds turns off and so on. I noticed that when the screen lights up after hard reset, if I place the hima in the cradle, the white screen stays on for 3 minutes, and this was exactly my settings in the power management(15seconds on battery, 3 mins on craddle), and the led light in the upper right corner is yellow, and after some time, it turns to green, as in battery charged. Active sync doesn't recognize the phone, I can't get serial screen, and nothing other than what I described in this post. I've tried hundreds of times the entire procedure, but nothing still.
Any ideas. Thanks,
J.
Latest news:
After many attempts to enter b/l, I wasn't successful. Now I placed the device in the cradle, the screen turned white as usual, the amber light turned on, and I received a message in the system tray in my pc the a new hardware was detected, and that XP is instaling..... After that, I received a message that the new device is Windows based Mobile Device.
And then, xp created a new LAN, but , it shows a limited or no connectivity.
why is this happening? And what is happening?
the pda show up as shuch if it's ready to receive a rom from the rom upgrade
But still, when I start himaupgradeut_noid.exe I get error 101, connection error
Note that I only get ehite blank screen, and not serial v1.06/usb v1.06, like I had before my last upgrade to 2k5. perhaps the b/l is corrupted or something?
cheers,
J.
hi guys,
Is this the backup battery we need:
http://www.ipaqrepair.co.uk/view_product.php?product=375
Please advise,
10x,
Jordan.
Hi guys !
I've tryed to upgrade my S200 G4 with a latest rom for my girlfriend but the upgrade seems to have failed. Now when I plug my S200, it auto reboot every 2 secondes. It displays the RGB mode during 2 sec, then it reboot, it displays the RGB during 2 sec, then it reboot etc...
Sometimes, if I removed battery during few minutes, then plug it, it doesn't reboot quickly, so I launch an upgrade process but I've got an error [CONNECTION ERROR].
I've tried many solutions found on XDA but no way
Did somebody has an idea to help me please ?
try to charge your battery. Make sure it was 50% charge before flashing...
Ok I will try it. That's because with RGB mode I can't see the percentage of charge Thanks
Starguezer said:
Hi guys !
I've tryed to upgrade my S200 G4 with a latest rom for my girlfriend but the upgrade seems to have failed. Now when I plug my S200, it auto reboot every 2 secondes. It displays the RGB mode during 2 sec, then it reboot, it displays the RGB during 2 sec, then it reboot etc...
Sometimes, if I removed battery during few minutes, then plug it, it doesn't reboot quickly, so I launch an upgrade process but I've got an error [CONNECTION ERROR].
I've tried many solutions found on XDA but no way
Did somebody has an idea to help me please ?
Click to expand...
Click to collapse
PLUG YOUR PROPHET TO PC
FORCE BOOTLOADER MANUALLY SEE MY POST 1 IN THE STICKY SECTION FOR " HOW TO"
........
I've tryed to force it to boot mode but it auto reboot so it doesn't stay in boot mode.
I'm charging the battery and I will try it again after.
I've charged the battery during all the day and now when I try to switch on the device, it stay turned off, nothing displayed on the screen.
I've removed battery during 15min, switch on then it display RGB mode during a second and shutdown. No way to stay it turned on. Can't access to boot mode manually with comm button...
Did the battery is out of order ? Did I have to bought a new one ? Is there another solution ?
Starguezer said:
I've charged the battery during all the day and now when I try to switch on the device, it stay turned off, nothing displayed on the screen.
I've removed battery during 15min, switch on then it display RGB mode during a second and shutdown. No way to stay it turned on. Can't access to boot mode manually with comm button...
Did the battery is out of order ? Did I have to bought a new one ? Is there another solution ?
Click to expand...
Click to collapse
1. try to charge the battery on the other charger,
2. if battery cannot be charged, change a new one,
3. then normal operation steps...
Thanks for the tips, I will try it
I'e pluged it with the AC adapter and it has recharge the battery ! It was the reason of the RGB mode highlights !
I've make an upgrade and it works !!!
So many thanks guy !!!
Hi everyone!
I choosed to reboot my phone, the screen turned black and after that nothing has happened.
I've tried to pull out the battery, but that didnt fix it.
The LED does not light up when I connect the charger.
Any idea of what's wrong, and if it's possible to fix this?
Hi i hope everyone is doing great today.
I brought this device a few weeks and worked pretty good. I havent used it for like 2 weeks it was always on sleep mode because i havent turn the tv on for 2 weeks. (it shows like a red light which is sleep mode on the device)
I switch the tv on and then the device with the remote control. It turn on blue indicating it is now on. But for a reason i cant seem to find it the android page on the screen.. it usually just click HDMI1 Or HDMI2 on the tv... like it worked all the times but now i cant see nothing no apps nothing. It has the device on and even if i tried to restart and unpluged and take out the HDMI cable off and back on the device will remain blue as in turn on at straight up even when i plug the cable back in.
So is there a way to fix this or a restart ? i dont no what happenend to the device or what is going on.
Not an issue with the tv...dvd player works... tv works... channels working. But the device shows a blank screen. i tru press the turn off button on the remote control but nothing does to it because there is a blank black screen on tv. I have the device unplug from the wall but even if i turn the power on the back wall the device will always show blue as in its on it is no longer sleep mode.... But still dont see anything on the tv screen for the device to the area which i normally watch. I checked the cables everything seems fine.
The small device has no reset or buttons.. you just have to relie on the remote control instead.
What happened to the device i have no idea... its just shows the device has a blue light at it. When its blue this means the device is turn on.
Since i haven't used the device for 2 weeks it was always on red colour on the device which means (the device is on sleep mode) because im not watching tv)
So what can i do? what do you think what is wrong? Nothing shows on the tv screen for it. But the device has now kept itself on blue light which means its always now ON if i plug the cables... it wont go to sleep mode or anything as in red light but nothing i can do because i dont see anything on the tv screen for this android device
Can you help? thank you
johnau014 said:
Hi i hope everyone si doing great today.
I brought this device a few weeks and worked pretty good. I havent used it for like 2 weeks it was always on sleep mode because i havent turn the tv on for 2 weeks. (it shows like a red light which is sleep mode on the device)
I switch the tv on and then the device with the remote control. It turn on blue indicating it is now on. But for a reason i cant seem to find it the android page on the screen.. it usually just click HDMI1 Or HDMI2 on the tv... like it worked all the times but now i cant see nothing no apps nothing. It has the device on and even if i tried to restart and unpluged and take out the HDMI cable off and back on the device will remain blue as in turn on at straight up even when i plug the cable back in.
So is there a way to fix this or a restart ? i dont no what happenend to the device or what is going on.
Not an issue with the tv...dvd player works... tv works... channels working. But the device shows a blank screen. i tru press the turn off button on the remote control but nothing does to it because there is a blank black screen on tv. I have the device unplug from the wall but even if i turn the power on the back wall the device will always show blue as in its on it is no longer sleep mode.... But still dont see anything on the tv screen for the device to the area which i normally watch. I checked the cables everything seems fine.
The small device has no reset or buttons.. you just have to relie on the remote control instead.
What happened to the device i have no idea... its just shows the device has a blue light at it. When its blue this means the device is turn on.
Since i haven't used the device for 2 weeks it was always on red colour on the device which means (the device is on sleep mode) because im not watching tv)
So what can i do? what do you think what is wrong? Nothing shows on the tv screen for it. But the device has now kept itself on blue light which means its always now ON if i plug the cables... it wont go to sleep mode or anything as in red light but nothing i can do because i dont see anything on the tv screen for this android device
Can you help? thank you
Click to expand...
Click to collapse
The devie was working pretty much fine and new and worked. When not watching the device went red color mode. But when i turn the device on with the remote control it went blue which emans i have just turn on the device. But i dont see nothing on screen no way for me to restart or anything because theres nothing on the screen on display. Just a blank screen. And no no one has touched the tv what so ever.
I have the same problem. Any solutions yet?
try this, it could be the power issue. unplug the power adapter cable from the device and use the USB port and USB cable for supplying power to the device.
Same issue second box now just frozen tried reset unplugging etc
Hi everybody,
I am facing a strange situation with my GTS 1 : since my last recharge, my screen stays dark; if I long-press the button, the amazfit logo appears but then it turns black again.
If I plug it to charge, the screen appears and it goes on charging until 100%, then it stays with the screen working for a while, but if I try to change the watch face (or sometimes, also to "find the watch" with the Zepp feature) it goes black again. To make it even worse, sometimes it just goes black and freezes after a while I am wearing it, and the only way to revive it is to plug it to charge again.
I tried to factory reset, to reinstall firmware and resources (with Notify app: Zepp does not detect any update) , and I am starting wondering that the battery could be somehow defective (I bought it two years ago...) - any hint from you experts, or anything I could try to understand what is wrong? Thanks in advance!