Is it possible that underclock to 1000mhz would make my SMS not send ?
I had a problem some week ago about that some SMS send quickly after an other (like one sec after the first SMS) stay at "Pending" without sendin .. I thought it has solved by himself but it occured again today, the only thing i see is that i underclocked my CPU to 1000MHZ
There is no undervolting, and i didn't touch to /system or put tweaks ..
I full wiped, flashed stock rom and flashed Siyah, then underclocked to 1GHZ with Extweaks, didn't touch to anything else ..
So my question is .. Is it possible that underclock may cause some interferance or something like that with my modem that could make possible that some sms send very quickly just stay on "Pending"
tlf55 said:
Is it possible that underclock to 1000mhz would make my SMS not send ?
I had a problem some week ago about that some SMS send quickly after an other (like one sec after the first SMS) stay at "Pending" without sendin .. I thought it has solved by himself but it occured again today, the only thing i see is that i underclocked my CPU to 1000MHZ
There is no undervolting, and i didn't touch to /system or put tweaks ..
I full wiped, flashed stock rom and flashed Siyah, then underclocked to 1GHZ with Extweaks, didn't touch to anything else ..
So my question is .. Is it possible that underclock may cause some interferance or something like that with my modem that could make possible that some sms send very quickly just stay on "Pending"
Click to expand...
Click to collapse
NO!
Underclocking to 1GHz will never do that. Something else must be responsible for it. Maybe a temporary network problem
Even underclocking to 800 mhz ? i did it wrong, i just saw that it was on 800 mhz .. :/ but i didn't see the difference with 1ghz, cause with my phone i just do some SMS (no game or something like that)
I'm satisfacted with 800 mhz, should i leave it like that if you think that it isn't possible that 800 mhz couldn't cause interference and things like this .. or should i go 1ghz ?
tlf55 said:
Even underclocking to 800 mhz ? i did it wrong, i just saw that it was on 800 mhz .. :/ but i didn't see the difference with 1ghz, cause with my phone i just do some SMS (no game or something like that)
I'm satisfacted with 800 mhz, should i leave it like that if you think that it isn't possible that 800 mhz couldn't cause interference and things like this .. or should i go 1ghz ?
Click to expand...
Click to collapse
If your phone is running fine, then Leave it like that. Sometimes, I use 800-100MHz myself, anytime i need my phone for two days without charging it.
The problems Underclocking might give you, are phone Freezing, Black screen, Soft reboot etc
Sounds like your apns are having problems. Have you tried restarting your device a few times?
Sent from my GT-I9100 using xda premium
Related
I tried asking this in the Megatron-thread but as usual, no answers...
I am a little worried about keeping my phone overclocked at all times, so I was thinking about downloading SetCPU and switching between 600 and 700 via that app. But my question is this: Megatron ROM overclocks the phone by default. If I download a 3rd-party app to overclock/underclock the phone, will this mess up the whole system?
Anyone? Would really appreciate help!
i've been using megatron & setcpu together for the past month.. no issues yet, so cant promise ma phone wont go up in flames i clock extra if needed
Ok, thanks!
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
sarfaraz1989 said:
My Experience: USing LOL rom with default OC gave me kernel panics ...so instead i disabled OC in ROm and wud then OC using SetCPu...ALso I dont know why but touch feels a lot more smoother on LOL rom with the lag fix than megatron....so i switched from megatron to LOL...Currently even with maxCPu 480Mhz and conservative profile..touch is very smooth on LOL
Click to expand...
Click to collapse
How do I disable the OC in Megatron? By adding the "minitron" file and then using SetCPU?
Hi all,
I'm a newbie in Android world. Successfully flashed my O1 to Megatron v1. Afterwhich I tried installing SetCPU to it and overclock to 806mhz & above. However, after overclocking with SetCPU, the whole phone's performance became more sluggish than the original Megatron 729mhz...
Someone please advise me on how to overcome this and make the phone speedier with high frequency.
Is there a way to edit some of Megatron's kernel to make it 806mhz on default even without using SetCPU?
Don't use set on boot feature, it will make ur phone get stock on bootloop...
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
ccdreadcc said:
Don't use set on boot feature, it will make ur phone get stock on bootloop...
Click to expand...
Click to collapse
Got it! Tried last night without set on boot feature. Working fine with 806mhz and speedier than 729mhz. However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card? I'm still using the original 2gb microsd card tt came together with the O1... Will changing to a class 6 or higher microsd card let me clock higher? or my chipset is just lemon at 806mhz?
FnH84 said:
So can someone tell me how to proceed with this? I want to be able to change between 600 and 700, when I please. Thanks
Click to expand...
Click to collapse
FnH84: I downloaded SetCPU from XDA forum and can tweak the frequency between 600 & 700 by myself. Even can set profiles to govern the speed at different situations.
taeivon said:
However my chipset refuses to go into higher frequency without freezing and rebooting... Is it due to my microsd card?
Click to expand...
Click to collapse
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
How come Samsung Galaxy Mini running on the same chipset offer 800Mhz as stock???
Man, I don't know! How come the same "Pentium IV" processor could come in speeds from 1.3 GHz to 3.8 GHz?
Can any of you actually believe that LG would underclock an 800 MHz CPU and sell it to us as a 600 MHz instead of letting it run at its best?
Galaxy Mini is obviously using a CPU designed to run at 800 MHz, even though it bears the same name. And that one can probably be overclocked to above 1 GHz.
masteryx said:
You are already pushing the CPU to its limit with that 806 MHz frequency. Do you even realize is 34% above the designed specs for this CPU? You're already lucky enough you got it stable at 806, and no SD card will ever make a difference, they're not related.
Click to expand...
Click to collapse
Thanks for your reply. I was thinking bout the same as the other guy, that galaxy ace can run at 800mhz, and why not O1.
Hmm... Isn't there any other ways to push the frequency higher? Maybe supply more voltage to the core? I dont mind sacrificing batt life, I just wanna try ways to push it to the max~~
Guys... I just wanna know the reason behind the OC mechanism of P500 that does not allow it to OC beyond 729 MHz in stable form. .
Whereas the GT-540 with same CPU gets easily OC to 900 MHz.
Please somebody reply to this..
rjtchn15 said:
Guys... I just wanna know the reason behind the OC mechanism of P500 that does not allow it to OC beyond 729 MHz in stable form. .
Whereas the GT-540 with same CPU gets easily OC to 900 MHz.
Please somebody reply to this..
Click to expand...
Click to collapse
Because the HW (chip) is not rated to run at such frequency. If you are lucky, you will be stable @806MHz or whatnot. If you are not and got the less perfect silicon, they you will crash even @ 729. Nothing above the stock frequency is guaranteed.
(Been explained number of times here.)
doktornotor said:
Because the HW (chip) is not rated to run at such frequency. If you are lucky, you will be stable @806MHz or whatnot. If you are not and got the less perfect silicon, they you will crash even @ 729. Nothing above the stock frequency is guaranteed.
(Been explained number of times here.)
Click to expand...
Click to collapse
Yep, it actually depends on the device itself.
Gt540 at 900 MHz have you looked at our forum on m6 we can't get past 806 stable oc some of us 844 tops anything past that unstable plus crashing constantly we all want the Max but its hard to achieve better to focus on swap ram io speed stability
Sent from my GT540 using XDA App
doktornotor said:
Because the HW (chip) is not rated to run at such frequency. If you are lucky, you will be stable @806MHz or whatnot. If you are not and got the less perfect silicon, they you will crash even @ 729. Nothing above the stock frequency is guaranteed.
(Been explained number of times here.)
Click to expand...
Click to collapse
Lol!! Hahaha
He is just wanting to have more 10 post..
Sent from my LG-P500 using XDA Premium App
I'm running stable at 787. Had a few crashes but I think it was the ROM because I reflashed and no problems since then.
i think it also depend of the kernel becuas with the first kernel there was for our phone i could go to 748 witho no problem then with matt kernel only to 729 above tha eventuality the phone crash with franco i could go to 768 but sometimes crash,so could be hw yes but the kernel also help and have a big part in oc...
thats what i think
sorry for the english
after root... i have installed SetCpu, i have overclock my processor to 1.6ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Depends on the phone. Mine can't run above 1.4ghz stable (but my GPU can overclock easily).
^What he said. Try it for a while, but if you get reboots or freezes, pull it back to 1.4 or 1.2.
if it runs stable then you can no problem
Watch your temp. Might be a phone but it's the same as a computer. That reno gets to high, and you're looking at overheating and possibly causing corrupted files from shut downs or worse, hardware damage.
Correct me of I'm wrong.
Clay
Sent from my SGH-I777 using XDA
emoskremo said:
after root... i have installed SetCpu, i have overclock my processor to 1.6ghz.. the question is, can i use this setting for daily use? is it will cause my processor hot or damage??
Click to expand...
Click to collapse
Just make sure you don't check "Set at boot" until you're sure you can set it at 1.6 with out reboots and crashes...... GL
Why 1.6ghz all the time? 1.4ghz uses MUCH less power (meaning less heat as well) and is 99% as smooth.
Colton127 said:
Why 1.6ghz all the time? 1.4ghz uses MUCH less power (meaning less heat as well) and is 99% as smooth.
Click to expand...
Click to collapse
Very good point....
I underclock to 800 . And phone is just as snappy. Why would ya wanna use 1.6 out of curiosity ?
Sent from my SGH-I777 using Tapatalk 2
Honestly the only reason someone would overclock to 1.6 GHz would be for bench marking, which i find useless. My processor is usually clocked to 800 MHz and i can play games like N.O.V.A. 3 with only slight lags here and there.
I do something similar to a few people here. I keep it at 800 most of the time and bump it up to 1000 when I'm playing certain games. Then back to 800 when I'm done. Responsive enough for whatever I have to do and doesn't overheat.
Wow OP
What a question OP.
I can't believe no one called you out yet.. I will be the first
If you want to kill your phone hardware then keep it at 1600! (which is overclocked too you dummie)
USE SetCPU so that your phone can
1. remain cool when high CPU cycles are needed
2. save battery by making profiles especially for when your phone screen is off
...
ok theres good guides out there. just google it
Hello,
I have a rooted GT P7500.
Also i have got the SetCPU App for overclocking the CPU.
Standard is 1000mhz and iam able to put it up to 1600 mhz.
At the moment i have set it on 1400 mhz.
But is it possible to set it on 1600mhz without destroying
The device??
I dont know whether this is good for the cpu or not... :/
just...
just... some "yes" or "no" answer
should be enough...
could 1600mhz kill the cpu
or not?
It varies from device to device. I've heard of people running 1600 MHz on the tab before, not sure how long they had it at and if any problems appeared though. I've also heard that some people experience problems even at 1400 MHz.
Personally I'm running at 1400 MHz since I never had problems there. Pershoots kernel is also set to max out at 1400 MHz, stating that any higher frequencies could become very unstable.
So yeah, no "yes" or "no" answers to your question, only a "depends on your device".
If you do set it to 1600 MHz though, I'd watch it very closely and go back to 1400 at the first sign of problems.
nightmarebadger said:
It varies from device to device. I've heard of people running 1600 MHz on the tab before, not sure how long they had it at and if any problems appeared though. I've also heard that some people experience problems even at 1400 MHz.
Personally I'm running at 1400 MHz since I never had problems there. Pershoots kernel is also set to max out at 1400 MHz, stating that any higher frequencies could become very unstable.
So yeah, no "yes" or "no" answers to your question, only a "depends on your device".
If you do set it to 1600 MHz though, I'd watch it very closely and go back to 1400 at the first sign of problems.
Click to expand...
Click to collapse
To further this, I have never had any problems running at 1.4 but when setting to 1.5/1.6 it always freezes and needs a hard reboot after about 20seconds. However I've heard people run it at 1.6 all the time with no problems so I suggest a max of 1.4 but if you really want to know, try it at 1.5/1.6 for an hour or two with high usage and make sure set on boot is not ticked. If you feel it's stable then I guess YOUR device can handle it.
You have to remember any OC above 1ghz has the possibility of causing some damage but if you want performance 1.2 is a "safe" OC. 1.4 is riskier bit probably fine but 1.5&6 can pose some risk to the device if mishandled.
Sent from my Desire HD using xda app-developers app
I run mine at 1.5 with no issues, but it varies from device to device.
Sent from my GT-P7510 using xda app-developers app
Yes... I have Overclocked my tab to 1600Mhz... Only problem is faster battery drains...
I am running 1600 and so far no problems.
It froze only once while watching HBO Go but it could be something Wifi related as well.
Still watching watching battery life. I set the lowest speed to 216mhz in order to save some battery.
Above 1400 this tab feels smooth as the Nexus 10, I am running stock ROM with A1 kernel by the way.
yes, it will be useful
Never overclock my tab so much but you have to expect some issues if you overclock too much and too long.
As everybody say, it depend of your device. And of course, on all device you'll experience a faster battery drain. Try not to set the CPU manager to "performance"
I have a super old galaxy nexus that im currently using because i was flashing new rom on my note 3 and killed it.
So i decided to flash franco kernel in this baby to make this underdog fly with 1.8ghz.
The stock is 1.2ghz.
What i did was i set min freq=1.8 max freq=1.8.
Did some stress test, didnt have issues (no reboot or shutdown). But the frequency will drop go 192mhz to 384mhz.
Everytime i stress the phone (games or heavy multitasking), the phone would simply downclock itself even though i DEMAND and LOCKED the frequency to 1.8ghz.
Any ideas? I assume its thermal throttling
If so, how can i get around it? I just want maximum amount of performance
Thanks guys.
PowrtBall2016 said:
Everytime i stress the phone (games or heavy multitasking), the phone would simply downclock itself even though i DEMAND and LOCKED the frequency to 1.8ghz.
Click to expand...
Click to collapse
Don't do that.
Planterz said:
Don't do that.
Click to expand...
Click to collapse
Even if i dont overclock the phone, the galaxy nexus would downclock itself from its 1.2 ghz down to somewhere around 500mhz anyways.
Seems to be aging because literally anything i throw at it, it will overheat regardless.
I just want a usable phone, if its constantly clocked at 500mhz, its literally slow enough for me to certify its a piece of garbage