I cannot find anywhere what is the exact size of screen on TF201 for which I can do apps?
Is that 1280x780px or 1280x800px or something else ?
Thanks
1280 x 800.
Not correct, that is resolution of screen, but bottom bar takes that part and you as developer can't use that part.
I've did some testing and it seems that right screen size is:
1280x750
What are we developing in this thread besides a discussion that can easily be answered through Google? :laugh:
Related
1. The 4 dock icons at the bottom, thought they looked a little stretched vertically. The kind when the resolution is slightly incompatible with the the screen...
2. The display looked darker than usual. The brightness was max, but still looked a little less brighter than my HD7...
With your RaZrs, do you guys think so...
ALso, is there a way we can set the resolution and the brightness...there is an auto and there is manual right?
I saw it had something called 'Ambient lights' i display setting...
Hi, I have a nook Tablet that had a little problem.
The LCD screen is broken.
The left side for 1.5 inch is dead.
I'm looking for a way to change the screen size of the tablet.
That way I could still use the tablet.
If I could just specify a smaller size that way the dead pixel won't be in use.
Anyway, I hope that you understand.
So does that exist? Can it be done through a Theme?
Thx for your help!!
April fools?
Please, Photo in studio.
Moved To Q&A
This is a development section, its not for questions (or April fools)
No April's fool! Unfortunatly...
You see, the dead pixels on the right.
If I could find a way to resize the displayed picture, that would be great.
Maybe with a theme, to give another dimension... I don't know.
I'm sure it's possible, but I don't know how...
I can't post a pic but If you copy paste that link :
http: & //titam.free.fr/photo.JPG
Thx
No answer?
Seriously?
Nobody has a way to change the display size?
I'm sure it's not that difficult.
but i'm not a developer... unfortunately.
you can change the screen size but there is no way to tell it to take only a portion of the screen, so it will change the screen as a whole and you end up with the same. Only solution is to replace screen.
How did it happenned?
stupidity
As always... I put it in the glove compartement in the car, without a protection. and bim...
no real s/w fix for this. you gotta bite the bullet and swap out hardware.
[Q]How does TW hold up at higher LCD Density?
any notifications pane or dialer issues?
You mean lower?
Sent from my GT-I9300 using Tapatalk 2
Yeah, I meant lower. It looks like it borks it. I'm stuck at samsung boot screen.
junglizste said:
Yeah, I meant lower. It looks like it borks it. I'm stuck at samsung boot screen.
Click to expand...
Click to collapse
i couldnt get LCD Density Modder to apply a new density, crashes when trying to save it
Yeah I heard of someone using a lower density that got it to boot but it looked ugly with some settings I believe
Sent from my GT-I9300 using Tapatalk 2
used rom toolbox. set it for 220. stuck at samsung boot screen.
cleared cache
still stuck.
re-flashing the root-rom fixes it.
all setting and data intact.
Anyone succeed with changing ppi yet? Here we are, screen the size of a planet... and the email size shows what... 12 characters across??? Duh...
So - it's driving me nuts after running slimics on my SGS at 182ppi and I'm sure stock sgs3 is in the 240 range like most others seem to be.... but the LCD modder pro that I bought isn't good with ICS roms and wasn't sure if someone has already changed their build.prop for a better ppi/dpi (never get those straight...)?
Ozark_8125 said:
...I'm sure stock sgs3 is in the 240 range like most others seem to be...
Click to expand...
Click to collapse
The SGSIII ppi is 306
Ozark_8125 said:
ppi/dpi (never get those straight...)?
Click to expand...
Click to collapse
dots per inch is something that is normally discussed with printers, scanners, etc.
pixels per inch is something that is discussed with displays
demarcmj said:
pixels per inch is something that is discussed with displays
Click to expand...
Click to collapse
Thanks for that - just seems counter-intuitive for some reason that when you lower the pixels per inch that your display gets smaller. I'd love to get a better ppi for the phone though, lots more use could be made out of that football field sized screen.
This phone does not deal too well with lower ppi settings. Used LCD Density Changer and got stuck at boot. Had to restore to CWM backup and tried again with different settings to no avail.
Used LCD Resolution to try lower resolutions without the reboot effect and it looks like crap. I could not get past the bloated numbers on my pin lock, let alone look at the monstrosity for the icons on the screen. My HTC EVO (+ dialer fix) does 161 without any issues and makes such good use of the smaller screen.
Was hoping to get something better with the larger screen in the S3. Hoping that someone finds the trick to this phone!
The one poster above used from toolbox, which is what I saw as a recommendation for ICS roms but looks like it failed for him.
Sent from my SCH-I800 using XDA Premium HD app
I used Rom Toolbox to change the LCD res on the same day I rooted. I went from 320 to the 200 I was on my SR, then to 220, to 260 and increasing back up as I thought it was way too small. At some point I couldn't get back to 320 anymore as the max on the slider is the current res. So I had to reflash the rooted img to reset it back.
I'm a little confused here. LCD panels should almost always be left at their native resolution. Why are we trying to adjust the pixels?
pdykstra said:
I'm a little confused here. LCD panels should almost always be left at their native resolution. Why are we trying to adjust the pixels?
Click to expand...
Click to collapse
This isn't adjusting the screen resolution, it's changing the reported DPI so apps draw their stuff smaller to fit on the "lower resolution" screen. The actual display resolution never changes.
The reason the lower DPI settings cause an increase in perceived screen space is because all the apps (system or otherwise) believe the display to be of a lower density, so they draw smaller text/buttons/images/etc to fit on (what they think is) a smaller screen. The display is still being driven at its native 1280x720.
I am trying to make a wallpaper in PS for this phone and i need the size of the wallpapers. everybody says its 1080 dimensions but i want one for only one screen. anybody know?
familydude99 said:
I am trying to make a wallpaper in PS for this phone and i need the size of the wallpapers. everybody says its 1080 dimensions but i want one for only one screen. anybody know?
Click to expand...
Click to collapse
1080 x 1920 is the number of pixels on the screen. That should be the wallpaper dimensions.
EDIT: The size of one screen, that is.
Hello all,
I'm relatively new to android, but I've been playing with RemixOS trying to see if it would be a suitable replacement for Android x86 on various devices.
Right now, I'm using RemixOS on a 55" 4k touch display, running at 3840x2160 resolution, with a dpi setting of 160 (to make the OS readable/touchable reliably).
Here's the issue: in the middle of the screen, touch is spot-on accurate, but the closer I get to the horizontal edges, it skews a bit, until it is about a full inch off near the absolute edge. Changing the screen resolution and dpi settings seems to have no effect on touch. It seems as though the OS thinks that the touch area is a couple of inches larger than it actually is.
Does anyone know a fix for this particular issue?
Thanks!
been bashing my head against this problem all day, and I've made a few steps in the right direction: namely, I see what the issue is, but I have no idea how to go about fixing it. When I do a dumpsys display, I see that the resolution that the system is reporting for the monitor is 4096x2160, but that's not what it actually is - it's 3840x2160. This explains the offset touch around the horizontal edges of the screen, but I have no idea how to force the resolution for both the video and touch down to the right resolution. I've tried wm, which does work to correct the video, but has no effect on touch, and i've tried setting the resolution as a boot parameter, which does basically the same as wm.
I hope that makes sense, my brain is mush after today.
halp.