My problem is that non of the apps seem to be stuck in ram so every time i want to launch an app it loads up all over again every time, im running stock cm7 fxp 130, min freq 384MHz, max 1013 MHz interactive governor, tried to improve it with v6 supercharger but no result
Sent from my X10i using xda app-developers app
Hey, this is the only ROM that happened to you? I mean, this issue still happen with CM9 ICS Xperia S?
Did you wipe dalvik cache
Also perform a clean and full installation of ROM again http://forum.xda-developers.com/showpost.php?p=17998666&postcount=12446
[email protected] said:
My problem is that non of the apps seem to be stuck in ram so every time i want to launch an app it loads up all over again every time, im running stock cm7 fxp 130, min freq 384MHz, max 1013 MHz interactive governor, tried to improve it with v6 supercharger but no result
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Hey, try to move so many apps as you possibly can to Your sd card. (have at leas 100mb free, and 50mb of RAM) Also check out if You haven't set any option for max number of background processes.
With Rom toolbox you can manage RAM and chooose which application/process must be designated
[email protected] said:
My problem is that non of the apps seem to be stuck in ram so every time i want to launch an app it loads up all over again every time, im running stock cm7 fxp 130, min freq 384MHz, max 1013 MHz interactive governor, tried to improve it with v6 supercharger but no result
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
ROM ToolBox--->Performance--->Auto Memory Manager
Your using that rom? That is on my worst rom list. You can do soooo much better. In its stock state it really bad. Alot of work went into it but it's in MY OPINION not daily driver material.
Sent from my X10i using xda app-developers app
Try cm9 by cmx10, u can also try using supercharger to lock specific app in memory....all though that will lower d chances of d odr ones chiling in memory
Sent from my Xperia X10 using xda app-developers app
Related
I'm running fauxs kernel but I scaled it back to 1 ghz. However, when I select Time ib each state I notice that it's still going past that frequency, what am I doing wrong?
Sent from my MB860 using XDA App
i am having same issue, i think set cpu only kicks in after the boot.
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Anyone?
Sent from my MB860 using XDA App
?
10 char
do you have set on boot selected?
yeah 10char
IUH1991 said:
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I meant to say setcpu only works after boot like cpu will be 1100 while booting after OS is loaded up setcpu gets super user permission and then scale cpu down.
If kernal has set clock to 1000 by defualt and only then it boots at 1000 and u can use setcpu to over clock it.
i guess old faux's 1.6 kernel was default 1000 new 1.7 is not.
ok folks lets debate this in detail witch
app is better for the atrix overall
ltdanno360 said:
ok folks lets debate this in detail witch
app is better for the atrix overall
Click to expand...
Click to collapse
+1 for SetCPU
frrst of all ever developer i have came across talks about using set cpu and it has specific version for xda community for free )try and top that )
2nd it has much more options then just over/under clocking and over/under volting.
3rd i havent found any problems with it yet so dont look for any other alternatives yet so hope this helps u with decision making.
+2 for SetCPU
Sent from my MB860 using XDA App
dag set cpu is popular i wonder why i have noticed less heat a huge differnce with cpu master
Sent from my MB860 using xda premium
+3 for set cpu
Joelesprod said:
+3 for set cpu
Click to expand...
Click to collapse
Make that +4
SetCpu pwns.
-Yo momma's so stupid she finds iOS complicated.-
I like setCPU but when I slide the max cpu to 1000 and I reopen setcpu it jumps to 1300... I tried CPU tuner today and it has scaling and gives you a ton of option settings. I going to try it out for a while.
Im using no-frills
Sent from my GT-S5570 using xda premium
I have tried both of those,but I have had better results and prefer the interface and options of System Tuner
Every time i use my s3 it runs at 1400mhz almost all time. I haven't flashed any kernel. It is only rooted and i cant figure out what app is forcing cpu run so high. Only app what comes to my mind is touchwiz... (can't upload screenshot of cpu spy, i upload it with computer if needed.)
Sent from my GT-I9300 using XDA
rroronoa said:
Every time i use my s3 it runs at 1400mhz almost all time. I haven't flashed any kernel. It is only rooted and i cant figure out what app is forcing cpu run so high. Only app what comes to my mind is touchwizard... (can't upload screenshot of cpu spy, i upload it with computer if needed.)
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
im sure the cpu would report other frequencies too. if you want to check the high cpu usage install os monitor from market and find the culprit app
bala_gamer said:
im sure the cpu would report other frequencies too. if you want to check the high cpu usage install os monitor from market and find the culprit app
Click to expand...
Click to collapse
Yeah it uses other frequencies too but only sometimes, it uses 1400mhz even when im just scrolling my homescreen but thanks i will try that app if it helps.
Sent from my GT-I9300 using XDA
so what was the cause of this? did you ever find the reason? I even did a factory reset and still seeing 80+% usage at 1500 (or 1026 when i got power save on) with minimal time in deep sleep.
stock unrooted official JB update
atb1183 said:
so what was the cause of this? did you ever find the reason? I even did a factory reset and still seeing 80+% usage at 1500 (or 1026 when i got power save on) with minimal time in deep sleep.
stock unrooted official JB update
Click to expand...
Click to collapse
I didn't never find the reason.. but when I changed roms couple times it started to run at lower frequencies. It could be too newer android what solved problem.
Sent from my GT-I9300 using xda app-developers app
For the right answer ...
rroronoa said:
Every time i use my s3 it runs at 1400mhz almost all time. I haven't flashed any kernel. It is only rooted and i cant figure out what app is forcing cpu run so high. Only app what comes to my mind is touchwiz... (can't upload screenshot of cpu spy, i upload it with computer if needed.)
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
For the right answer - use BetterBatteryStats (there is a free XDA-dev build somewhere around)
I have problem with my phone ,, my phone runs always with highest cpu frequence if i use it ,, i tried all gb kernels all versions and the same problem i changed govenour etc undervolt it and and and but the same problem.. because of that my battery drain to quick ,, iam running atomic gb v8 with nightelf kernel 10.1 experimental
Sent from my MT15i using xda app-developers app
I need help :/ i searched on the net but i found nothing
Sent from my MT15i using xda app-developers app
Give a different ROM try or any ics or jb.. And see..
Sent from my MT11i using xda premium
dontbelive said:
I have problem with my phone ,, my phone runs always with highest cpu frequence if i use it ,, i tried all gb kernels all versions and the same problem i changed govenour etc undervolt it and and and but the same problem.. because of that my battery drain to quick ,, iam running atomic gb v8 with nightelf kernel 10.1 experimental
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
This happen on every rom? Why still GB. Check dmesg and logcat, dp you have governors set up properly? Download CPU Tuner or SetCPU (available for free on XDA) and try changing settings (max freq and governor) by hand. If this persist check running apps, maybe one of them keeps heavy load on CPU?
Finally, try flashing something ICS or later and report back.
Ivyl said:
This happen on every rom? Why still GB. Check dmesg and logcat, dp you have governors set up properly? Download CPU Tuner or SetCPU (available for free on XDA) and try changing settings (max freq and governor) by hand. If this persist check running apps, maybe one of them keeps heavy load on CPU?
Finally, try flashing something ICS or later and report back.
Click to expand...
Click to collapse
On every rom yeah ,, i dont want to go back to ics because it is too laggy and i dont want to go to jb because of the camera ,,
I tried these apps but still the same
And Nope i dont have any apps installed ony whatsapp , yuilop ,kik messenger and instagram
And how can i do logcats and dmseg ? Thank you for your reply
Sent from my MT15i using xda app-developers app
dontbelive said:
On every rom yeah ,, i dont want to go back to ics because it is too laggy and i dont want to go to jb because of the camera ,,
I tried these apps but still the same
And Nope i dont have any apps installed ony whatsapp , yuilop ,kik messenger and instagram
And how can i do logcats and dmseg ? Thank you for your reply
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
What happens if you limit top frequency? Is it still running on full freq, despite limiting? Are those running correctly, having root privileges?
You can get logs by ADB. "adb logcat" and "adb shell dmesg" are your friends. If you need more details on them search forums.
Ivyl said:
What happens if you limit top frequency? Is it still running on full freq, despite limiting?
You can get logs by ADB. "adb logcat" and "adb shell dmesg" are your friends. If you need more details on them search forums.
Click to expand...
Click to collapse
Yeaah always at highest frequence when i limit top frequence to 600 mhz it is always running this frequence except screen is off and not used ,, and thanks
Sent from my MT15i using xda app-developers app
I undervolted my phone with Setcpu with max freq of 1150 MHz, however in CPY spy i still find freqs over that r being used.....is there something wrong?
Sent from my HTC One X+ using xda app-developers app
ROMFlasherAce said:
I undervolted my phone with Setcpu with max freq of 1150 MHz, however in CPY spy i still find freqs over that r being used.....is there something wrong?
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
You most likely have a performance option that came with the Custom Rom or are running an app that has System App access , which will over ride a User App. Double check all apps and settings to see if you have any other programs that have system user rights to your CPU, that is most likely what is over taking your desired settings.
Kyles1329 said:
You most likely have a performance option that came with the Custom Rom or are running an app that has System App access , which will over ride a User App. Double check all apps and settings to see if you have any other programs that have system user rights to your CPU, that is most likely what is over taking your desired settings.
Click to expand...
Click to collapse
Thanks for the quick reply, I'm on the Android Revolution HD 8.0 ROM now, that is probably the reason for this. Can I do something with this?
Sent from my HTC One X+ using xda app-developers app
Open up the app your using to undervolt, these should be an option to restore default values. Once back on default go ahead and open the programs' App info and disable or freeze it. Reboot and run your CPU spy app and see what is taking charge of your voltage. Also possible your voltages are not sticking which has to do with the ROM. Id suggest running profiles for CPU rather then undervolt. I. E. 534 mhz - 1434 mhz when screen on, 348-1012 when screen off. SetCPU is what i use. You have less of a chance of frying the motherboard and doing irreversible damage to your phone internally
Sent from my XT907 using Tapatalk 2
Undervolt has to do with lowering the power that goes to the battery. when desired mhz occurs, where as underclocking has to do with specifically CPU processors and with a specified setting (screen off, music app on) occurring. Just to clear up my previous post. Undervolting the battery use to do wonders on phones a few years back because of all around poor battery life on most devices. But nowadays it is pretty pointless.
Sent from my XT907 using Tapatalk 2
Setcpu is NOT compatible with tegra quadcore
Sent from my One X+ using Tapatalk 4
Lloir said:
Setcpu is NOT compatible with tegra quadcore
Sent from my One X+ using Tapatalk 4
Click to expand...
Click to collapse
What Lloir said. ^^^
Sent from my HTC One X+ using Tapatalk 2
The only app that seems to work properly with Sense stock kernel is Tegra Overclock.
Sent from my HTC One X+ using xda app-developers app