I have problem with my phone ,, my phone runs always with highest cpu frequence if i use it ,, i tried all gb kernels all versions and the same problem i changed govenour etc undervolt it and and and but the same problem.. because of that my battery drain to quick ,, iam running atomic gb v8 with nightelf kernel 10.1 experimental
Sent from my MT15i using xda app-developers app
I need help :/ i searched on the net but i found nothing
Sent from my MT15i using xda app-developers app
Give a different ROM try or any ics or jb.. And see..
Sent from my MT11i using xda premium
dontbelive said:
I have problem with my phone ,, my phone runs always with highest cpu frequence if i use it ,, i tried all gb kernels all versions and the same problem i changed govenour etc undervolt it and and and but the same problem.. because of that my battery drain to quick ,, iam running atomic gb v8 with nightelf kernel 10.1 experimental
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
This happen on every rom? Why still GB. Check dmesg and logcat, dp you have governors set up properly? Download CPU Tuner or SetCPU (available for free on XDA) and try changing settings (max freq and governor) by hand. If this persist check running apps, maybe one of them keeps heavy load on CPU?
Finally, try flashing something ICS or later and report back.
Ivyl said:
This happen on every rom? Why still GB. Check dmesg and logcat, dp you have governors set up properly? Download CPU Tuner or SetCPU (available for free on XDA) and try changing settings (max freq and governor) by hand. If this persist check running apps, maybe one of them keeps heavy load on CPU?
Finally, try flashing something ICS or later and report back.
Click to expand...
Click to collapse
On every rom yeah ,, i dont want to go back to ics because it is too laggy and i dont want to go to jb because of the camera ,,
I tried these apps but still the same
And Nope i dont have any apps installed ony whatsapp , yuilop ,kik messenger and instagram
And how can i do logcats and dmseg ? Thank you for your reply
Sent from my MT15i using xda app-developers app
dontbelive said:
On every rom yeah ,, i dont want to go back to ics because it is too laggy and i dont want to go to jb because of the camera ,,
I tried these apps but still the same
And Nope i dont have any apps installed ony whatsapp , yuilop ,kik messenger and instagram
And how can i do logcats and dmseg ? Thank you for your reply
Sent from my MT15i using xda app-developers app
Click to expand...
Click to collapse
What happens if you limit top frequency? Is it still running on full freq, despite limiting? Are those running correctly, having root privileges?
You can get logs by ADB. "adb logcat" and "adb shell dmesg" are your friends. If you need more details on them search forums.
Ivyl said:
What happens if you limit top frequency? Is it still running on full freq, despite limiting?
You can get logs by ADB. "adb logcat" and "adb shell dmesg" are your friends. If you need more details on them search forums.
Click to expand...
Click to collapse
Yeaah always at highest frequence when i limit top frequence to 600 mhz it is always running this frequence except screen is off and not used ,, and thanks
Sent from my MT15i using xda app-developers app
Related
Im on wicked rom and siyah 2.6.6 do i need to flash anything else on to it. I heard people talk about battery scripts and all that. And changing the voltage and im not sure if im suppose to flash on a script or something. If there is something i need to flash then someone let me know. I just want a good battery thats why i choose siyah so maybe this script stuff is good. Plus theres not one theres mutiple scripts so then which one. Its all very confusing to me :? Soneone enlighten me please
Thks
Sent from my GT-I9100 using XDA App
Ask in the Siyah thread in the development section.
No you don't need cuz in version 2.6.3 we see
removed siyah-battery, siyah-defaults and siyah-performance scripts from the blog. please remove all existing scripts before installing this version (or flash your existing rom again to remove all scripts). use init.d scripts if you know what you do, otherwise use VoltageControl app or ThunderBolt! scripts. use this CWM recovery flashable zip to remove previous 01siyah script. just flash it once and /system/etc/init.d/01siyah script will be removed.
Click to expand...
Click to collapse
and for 2.6.6 you don't need zip for battery.
The scripts people are talking about are pikcahu's thunderbolt! scripts, you dont need to flash them if you dont want to, they can help, but performance/batt are good at stock values.
(Part of thunderbolt! is built into the kernel anyway)
Thanks guys so i should leave it at wat its at when i flashed 2.6.6
Sent from my GT-I9100 using XDA App
jaher said:
Thanks guys so i should leave it at wat its at when i flashed 2.6.6
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
if it feels fine to you, then sure, if you want to tweak and mess about, then thats fine as well.
Lol kl at the moment its nothing special then again i only flashed it yesturday. Do u think there is any point using set cpu with 2.6.6
Sent from my GT-I9100 using XDA App
jaher said:
Lol kl at the moment its nothing special then again i only flashed it yesturday. Do u think there is any point using set cpu with 2.6.6
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
What do you want to change?
I would use voltage control myself, though with 2.6.6 it wont set max frequency correctly, that's supposed to be fixed next kernel version.
Well i use it to clock cpu lower at low battery and screen off
Sent from my GT-I9100 using XDA App
jaher said:
Well i use it to clock cpu lower at low battery and screen off
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yeh you can use setcpu to-do that, if you want! It wont hurt anything. Dont Undervolt to much or you may get instability.
By undervolt u mean underclocking right ?
Sent from my GT-I9100 using XDA App
jaher said:
By undervolt u mean underclocking right ?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
No.. undervolting is lowering the voltage at each frequency step
Underclocking is lowering the max frequency.
eg setting the max to 1000mhz would be underclocking
setting 1000mhz to 1100mV would be undervolting (just an example)
I havent even touched voltage settings i have no exp in tht
Sent from my GT-I9100 using XDA App
Wat would you say is better ondemand or this new lulzactive l. Whats the diff.
Sent from my GT-I9100 using XDA App
Every time i use my s3 it runs at 1400mhz almost all time. I haven't flashed any kernel. It is only rooted and i cant figure out what app is forcing cpu run so high. Only app what comes to my mind is touchwiz... (can't upload screenshot of cpu spy, i upload it with computer if needed.)
Sent from my GT-I9300 using XDA
rroronoa said:
Every time i use my s3 it runs at 1400mhz almost all time. I haven't flashed any kernel. It is only rooted and i cant figure out what app is forcing cpu run so high. Only app what comes to my mind is touchwizard... (can't upload screenshot of cpu spy, i upload it with computer if needed.)
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
im sure the cpu would report other frequencies too. if you want to check the high cpu usage install os monitor from market and find the culprit app
bala_gamer said:
im sure the cpu would report other frequencies too. if you want to check the high cpu usage install os monitor from market and find the culprit app
Click to expand...
Click to collapse
Yeah it uses other frequencies too but only sometimes, it uses 1400mhz even when im just scrolling my homescreen but thanks i will try that app if it helps.
Sent from my GT-I9300 using XDA
so what was the cause of this? did you ever find the reason? I even did a factory reset and still seeing 80+% usage at 1500 (or 1026 when i got power save on) with minimal time in deep sleep.
stock unrooted official JB update
atb1183 said:
so what was the cause of this? did you ever find the reason? I even did a factory reset and still seeing 80+% usage at 1500 (or 1026 when i got power save on) with minimal time in deep sleep.
stock unrooted official JB update
Click to expand...
Click to collapse
I didn't never find the reason.. but when I changed roms couple times it started to run at lower frequencies. It could be too newer android what solved problem.
Sent from my GT-I9300 using xda app-developers app
For the right answer ...
rroronoa said:
Every time i use my s3 it runs at 1400mhz almost all time. I haven't flashed any kernel. It is only rooted and i cant figure out what app is forcing cpu run so high. Only app what comes to my mind is touchwiz... (can't upload screenshot of cpu spy, i upload it with computer if needed.)
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
For the right answer - use BetterBatteryStats (there is a free XDA-dev build somewhere around)
My problem is that non of the apps seem to be stuck in ram so every time i want to launch an app it loads up all over again every time, im running stock cm7 fxp 130, min freq 384MHz, max 1013 MHz interactive governor, tried to improve it with v6 supercharger but no result
Sent from my X10i using xda app-developers app
Hey, this is the only ROM that happened to you? I mean, this issue still happen with CM9 ICS Xperia S?
Did you wipe dalvik cache
Also perform a clean and full installation of ROM again http://forum.xda-developers.com/showpost.php?p=17998666&postcount=12446
[email protected] said:
My problem is that non of the apps seem to be stuck in ram so every time i want to launch an app it loads up all over again every time, im running stock cm7 fxp 130, min freq 384MHz, max 1013 MHz interactive governor, tried to improve it with v6 supercharger but no result
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Hey, try to move so many apps as you possibly can to Your sd card. (have at leas 100mb free, and 50mb of RAM) Also check out if You haven't set any option for max number of background processes.
With Rom toolbox you can manage RAM and chooose which application/process must be designated
[email protected] said:
My problem is that non of the apps seem to be stuck in ram so every time i want to launch an app it loads up all over again every time, im running stock cm7 fxp 130, min freq 384MHz, max 1013 MHz interactive governor, tried to improve it with v6 supercharger but no result
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
ROM ToolBox--->Performance--->Auto Memory Manager
Your using that rom? That is on my worst rom list. You can do soooo much better. In its stock state it really bad. Alot of work went into it but it's in MY OPINION not daily driver material.
Sent from my X10i using xda app-developers app
Try cm9 by cmx10, u can also try using supercharger to lock specific app in memory....all though that will lower d chances of d odr ones chiling in memory
Sent from my Xperia X10 using xda app-developers app
When i try to set profiles !for apps nly!with a cpu program doesnt matter which one (setcpu, cpu adjuster,..) they never execute.. it seems like the program doesnt see that the app that u selected is running..
Im running omega rom v43.3 (mc3) with boefflakernel 2.9 if that would be relevant...
Any1 knows what i may be doing wrong or how to fix it?
Sent from my GT-I9300 using xda premium
I already posted this on the Rootbox rom thread, but I know not everyone reads the whole thread so it might save a bunch of people from asking the same question on different threads over and over again. I have tried out a few 4.2.2 roms and they would always reboot randomly, I used the 4Aces kernel and the Uber kernel and got the same results, constant random reboots. I fixed the problem by turning off CPU profiles. I use SETCPU to overclock, but I assume this is a kernel problem that would happen no matter which app you use to overclock. Hope this helps others!
Just to clarify, I'm still overclocking my device I've just turned off the CPU profiles.
Thanks a lot Porkenhimer, Will try this fix asap.
where is cpu profiles?
thanks, hope this somehow works
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Nice. Thanks
I went to check the profile but it was already disabled do I have to worry about it?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
cgibsong002 said:
where is cpu profiles?
thanks, hope this somehow works
Click to expand...
Click to collapse
Soo, yeah, OP, what exactly are "CPU Profiles". Is this some app? Or is it the setting like in SetCPU that lets you change profiles around in sleep, wake etc?
I don't see it on SetCPU.. Under the Profiles tab, the "Enable Profiles" is not checked. Never has been . I still get the occasional reboot but its somewhat rare at this point. Nothing to concern myself with
Sent from my SAMSUNG-SGH-I717 using xda premium
Many things happen that cause reboots... Set cpu profiles may be a problem with certain rom and kernel combos but is not a problem for others...specify which rom and kernel combos your using
shayneflashindaily said:
Many things happen that cause reboots... Set cpu profiles may be a problem with certain rom and kernel combos but is not a problem for others...specify which rom and kernel combos your using
Click to expand...
Click to collapse
Did an experiment yesterday and today, I ran 5 random 4.2.2 ROMs each for two hours, 1 hour with no CPU profiles setup and 1 hour with CPU profiles setup and enabled. I used the 4Aces kernel for each test. I also used a different profile setup for each ROM. I did a full wipe before installing each ROM. The ROMs I used were PAC-Man, Alliance, Rootbox, ReVolt & Jellybeer. I did not install any apps except for SETCPU. I had a total of one reboot with CPU profiles turned off, which was with the PAC-Man rom, and the least amount of reboot I had was with Rootbox, which was 3 reboots in one hour with CPU profiles enabled. Its pretty clear to me that enabling CPU profiles at least with the 4Aces kernel, will cause reboots. I had used both both the 4Aces and Uber kernals before doing this test and got reboots on every 4.2.2 rom I tried so I'm guessing if I did the same exact test with the Uber kernel I would get the same results. I'm not saying that other things are not also causing reboots, but its clear to me that something bad is happening when CPU profiles are enabled.
khaytsus said:
Soo, yeah, OP, what exactly are "CPU Profiles". Is this some app? Or is it the setting like in SetCPU that lets you change profiles around in sleep, wake etc?
Click to expand...
Click to collapse
Yes its the tab that says profiles in SETCPU.
Well you must have had a borinnnnng day haha. ... And your eyes must hurt for waiting on reboot.... I run 4/20 rootbox with profiles set for screen on 192/1242 WHEATLEY and screen off 192/972 powersave...4aces kernel. Only had one reboot and it was my daily driver for over a month. ...also the new base changes and merges may be messing with profiles set for set cpu in the newer 4.2.2 builds of roms and kernels. Cool to see someone giving that much time in a day to watch for reboots. Keep visine handy ...hope you figure out more
---------- Post added at 03:35 AM ---------- Previous post was at 03:33 AM ----------
And actually run a logcat of it re booting with profiles and we will have some answers to what is causing the issue
porkenhimer said:
Yes its the tab that says profiles in SETCPU.
Click to expand...
Click to collapse
This is the big miraculous fix?? Meh.
I fix all my Reboot issues by flashing a 4.1.2 aosp Rom with all of I717 JB source.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ltilt2 said:
I fix all my Reboot issues by flashing a 4.1.2 aosp Rom with all of I717 JB source.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Which Rom?
rogsoccerman said:
Which Rom?
Click to expand...
Click to collapse
Custom, made for me.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rogsoccerman said:
Which Rom?
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ltilt2 said:
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Well xda is the place of sharing.
Ltilt. Pm.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I've heard good things about stability with uber kernel + beanstalk rom
porkenhimer said:
I already posted this on the Rootbox rom thread, but I know not everyone reads the whole thread so it might save a bunch of people from asking the same question on different threads over and over again. I have tried out a few 4.2.2 roms and they would always reboot randomly, I used the 4Aces kernel and the Uber kernel and got the same results, constant random reboots. I fixed the problem by turning off CPU profiles. I use SETCPU to overclock, but I assume this is a kernel problem that would happen no matter which app you use to overclock. Hope this helps others!
Just to clarify, I'm still overclocking my device I've just turned off the CPU profiles.
Click to expand...
Click to collapse
Heres a fix...........dont flash 4.2
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Lol there won't be a fix ... some 4.2.2 its pretty stable though imo
••••changes with every flash••••