I "accidently" ripped off the usb cover on my XPS. Was trying to pull it out becuase its so annoying, i hate always having to close it and open it everytime i want to connect the charger, and it wouldnt come out instead just snapped. Now im wondering how does the replacement one fit back in? Cause the end is much larger than the actual hole. Anyone have any experience? And im not putting it back now but just in case for future when I decide to sell the phone.
I am pretty sure you will have to disassemble your phone in order to replace the micro usb protector
This may help -> http://www.youtube.com/watch?v=2OqQdwTtB_E
soldiers33 said:
I "accidently" ripped off the usb cover on my XPS. Was trying to pull it out becuase its so annoying, i hate always having to close it and open it everytime i want to connect the charger, and it wouldnt come out instead just snapped. Now im wondering how does the replacement one fit back in? Cause the end is much larger than the actual hole. Anyone have any experience? And im not putting it back now but just in case for future when I decide to sell the phone.
Click to expand...
Click to collapse
You must dismantle the whole phone, thus voiding the warranty. It simply slots in after being dismantled, self explanatory. However, please be careful as the part you unscrew on the back is connected via a ribbon to the main board which is directly attached to the sim card reader.
Related
The fascinate will not charge at all using either usb cable connect to the computer or wall charger. When it is dead and a usb cord is plugged in, all it does is power on the phone without the battery charging. It also is not recognized by any computer
I had some issues with mine not charging. What happened to me was that the middle part of the port was slightly bent. I found that slight pressure applied in an upward angle got it to charge and be seen to a degree from a pc standpoint. I have the belt clip combo case and i'd just prop the cable on top of the belt clip part and rest the phone at an angle and that worked.
My advice is to get back to stock, if you aren't already, then take it to a vzw store along with your cable (they will want to test it). Take all your apps off too, as they will remove them to see if that is the issue. Be sure to tell them that it used to work, you've tried the different ota's and they didn't work either, as they will want to try those too. Let them know you tried a factory reset first, and then did the ota's. They may want to offer you a lesser replacement. Insist it is a manufacturer defect, which it is, and that you just want a refurb/replacement. They should then offer you an overnight replacement device (signature required). Be sure to send the old one back as soon as you are sure the new one is ok, if not immediately call support for further instructions, otherwise they will charge you full price for the replacement. This should not cost you anything either.
It took me a month to get them to go through the whole process above, each time they did a portion of the above. I could not be happier with my refurb though, especially when it cost me nothing out of pocket.
Hope this gets you going down the right path.
Sent from my SCH-I500 using Tapatalk
Thread for hardware mods
POSTING INTERNAL tf101 pictures
like 3g dongle ? internal sd cards? ssd?
removing the battery for 2 HDD 500go?
finding sd cards hubs? usb to sata cables?
? there is a place in the tablet for a 3g dongle?
there are 2 screws under the upper rubbers and the dock open easy
there is a lot of spaces avaible
My MIFI might actually fit in there, all I would need to do is supply it power somehow.
I'm no hardware engineer though, but if thats possible it would save you from the driver issues with a 3g dongle.
I wonder if it would be possible to check which pins from the adapter connect to USB - so we can make DIY USB adapter for those without a dock.
hmm adding an hdd would be very interesting, sata won't be very hard, powersupply will be.
Sent from my O2x with CM7
This is what I was looking for, looking to do some mods to the dock.
Thanks Markolino72.
Internally mount and wire a 32gb memory stick to the USB port so you get a 32gb hard drive added whenever you dock It might even have enough room for a portable USB hub so you don't lose use of the external usb port?
does anybody think it will be easy to make a DIY dock fix for those with battery draining issues like me?
It seems like it would be relatively easy - just make a switch to either connect or disconnect the cords coming from the docking point.
Or even better, maybe if you put the correct microcontroller in there you can have it switch the pins to floating, if it senses that there is no tablet connected (not sure about the details though)...
ydnality said:
does anybody think it will be easy to make a DIY dock fix for those with battery draining issues like me?
It seems like it would be relatively easy - just make a switch to either connect or disconnect the cords coming from the docking point.
Or even better, maybe if you put the correct microcontroller in there you can have it switch the pins to floating, if it senses that there is no tablet connected (not sure about the details though)...
Click to expand...
Click to collapse
Have you seen the post in the General forum (2nd page now I think)? Posted by Asus_USA themselves, if you prove the 6 steps that your dock has the issue you can get a new one! I really do hope that I can get mine exchanged, waiting on a reply from my local service center..
Regards.
In regards to the hardware mods, that really looks amazing. Would love to put in my mifi there as well, attach it via USB to charge = your own 3g model Maybe a little modding you could get the mifi to power on only when the dock is connected (remove the battery of the mifi?) so that when it powers on it'll power on the mifi as well. Only a few thoughts.
Maybe a little modding you could get the mifi to power on only when the dock is connected (remove the battery of the mifi?) so that when it powers on it'll power on the mifi as well.
Click to expand...
Click to collapse
it's a good thought but the mifi I have (novatel 2200) wont work without the battery, for some reason if the battery is bad or removed you cannot run usb, it must be the way they have the power run through the battery or charging. Not sure if all are like this or not.
andrewklau said:
Have you seen the post in the General forum (2nd page now I think)? Posted by Asus_USA themselves, if you prove the 6 steps that your dock has the issue you can get a new one! I really do hope that I can get mine exchanged, waiting on a reply from my local service center..
Click to expand...
Click to collapse
I talked to the Asus service rep about it. They currently won't give you a new one since they have a hardware upgrade to fix it. If you wanted a new one you needed to do before they solved the problem. I'm waiting on the upgrade part to be delivered for for mine. Should in a few days.
A switch should theoretically work. The guy at the service center said the replace something that goes into the hinge of the dock. Looking at the teardown pics, you can see a wire goes into each side of the hinge, so I think they replace the wires and maybe make a new connection somewhere on the dock.
Surprising how much wasted space there seems to be in the dock -- it's nowhere near as tightly packaged as the tablet itself. Looks like Asus can optimize the size or fit some more features in future versions, if they want...
Let me see if I am thinking correctly...Your saying using something like mifi installed via USB wires (will it be always on?) then connect via WiFi on your transformer? So basically your putting the mifi in a case that can never be opened without a screwdriver? I guess one would always have access for your other devices as well as long as the TF is in the vicinity.
P.S. I think I think this is a good idea, not decided though. I like to think of it in a real world application.
there is another post with a guy putting in an SSD, but it bulges at the keyboard. A 32g SD card would be nice.
Sent from my Transformer TF101 using XDA Premium App
typci said:
I talked to the Asus service rep about it. They currently won't give you a new one since they have a hardware upgrade to fix it. If you wanted a new one you needed to do before they solved the problem. I'm waiting on the upgrade part to be delivered for for mine. Should in a few days.
A switch should theoretically work. The guy at the service center said the replace something that goes into the hinge of the dock. Looking at the teardown pics, you can see a wire goes into each side of the hinge, so I think they replace the wires and maybe make a new connection somewhere on the dock.
Click to expand...
Click to collapse
You are getting the replacement part? bought mine on the US, but live in chile... would really like to somehow get the part that needs to be replaced and do it myself
tanguita said:
You are getting the replacement part? bought mine on the US, but live in chile... would really like to somehow get the part that needs to be replaced and do it myself
Click to expand...
Click to collapse
There's very little chance they'll give anybody the part, and nothing in the previous person's post suggested they're doing so for him.
Talk to Asus Chile and get it serviced by them:
http://www.asuschile.cl/
http://latin.asus.com/Static_WebPage/Service_center_chile/
knoxploration said:
There's very little chance they'll give anybody the part, and nothing in the previous person's post suggested they're doing so for him.
Talk to Asus Chile and get it serviced by them:
http://www.asuschile.cl/
http://latin.asus.com/Static_WebPage/Service_center_chile/
Click to expand...
Click to collapse
Well I ended up calling them. I would have to ship the dock to "someone" in the US, have them ship it to the repair center, fix it, ship it back and then ask that "someone" to ship it back to me... sooo, I'm basically screwed... I ended up with a nice 150US paperweight (not even considering the horrible light bleed on the transformer).
tanguita said:
Well I ended up calling them. I would have to ship the dock to "someone" in the US, have them ship it to the repair center, fix it, ship it back and then ask that "someone" to ship it back to me... sooo, I'm basically screwed... I ended up with a nice 150US paperweight (not even considering the horrible light bleed on the transformer).
Click to expand...
Click to collapse
Yeah, actually, I hadn't realized that but it does say it clearly on the product warranty page:
"Brazil and South American countries don’t support global service"
http://support.asus.com/warranty.aspx?SLanguage=en&p=20&s=16&m=Eee Pad Transformer TF101
took mine apart also and there is quite a bit of room.
i plan on putting a 128gb usb flash drive inside the dock and soldering onto the usb connections once i get all the bits in.
Any bigger pictures? Are the screws under the rubber feet?
just two screws under the rubber feet near the hinge then it just pulls apart from the top
had to take mine apart as the spring/clip mechanism for the sd card wouldnt lock the card in.
now the card is stuck in with no nails haha a simple fix.
This is good news. I hacked a Crystal HD decoder card (pcie), USB wifi dongle, a logitech nano receiver, and a 4 port micro usb hub (from a touch screen setup) into a Dell mini 9 and there was absolutely no room compared to this.
They even have covers for the USB ports, so if you remove a header and solder wires up you just have to hot glue / epoxy that cover from the back and you are money. Looks clean and stock.
I have an old 64 GB thumbdrive that might find a new home. Maybe a 1.8" usb HDD would fit in there with the battery, without the battery who knows.
Alright, so not too long ago i tripped on my USB cord while my phone was charging and it took out the little plastic piece inside the micro usb port that holds all the wires in place. I bent them back into place, and can still charge my phone, but sometimes it hard resets when being plugged in/ getting unplugged.
I took it to the sprint store, they said physical damage and I would have to submit a claim with a 150 deductable. Well, i know a micro usb port doesnt cost 150 so i orderd "HTC micro USB" jacks off of ebay with the intent of replacing it myself. unfortunately the ones i got were not the same; wrong size and shape, etc...
my question is, does anyone know where i can get the right usb jack, is it even available or do i have to bite the bullet and pay the 150? or maybe someone has an idea i havent thought of yet?
Just bite the bullet and pay the $150. You know it will be done right (you get a replacement phone) and it will still be under warranty. You damage it replacing it yourself, you might not be able to file a claim later.
Have you already looked at this website?
Fizz11 said:
Alright, so not too long ago i tripped on my USB cord while my phone was charging and it took out the little plastic piece inside the micro usb port that holds all the wires in place. I bent them back into place, and can still charge my phone, but sometimes it hard resets when being plugged in/ getting unplugged.
I took it to the sprint store, they said physical damage and I would have to submit a claim with a 150 deductable. Well, i know a micro usb port doesnt cost 150 so i orderd "HTC micro USB" jacks off of ebay with the intent of replacing it myself. unfortunately the ones i got were not the same; wrong size and shape, etc...
my question is, does anyone know where i can get the right usb jack, is it even available or do i have to bite the bullet and pay the 150? or maybe someone has an idea i havent thought of yet?
Click to expand...
Click to collapse
I would not recommend attempting to replace the USB jack unless you are skilled with a soldering iron. The surface mount components are not for the faint of heart. If you don't know what you are doing, you risk damaging the phone evern more.
Somehow the micro usb port on the phone (the charger) has been mashed up inside, i think it may have been due to someone trying to fit the wrong charger into it.
a shop said it'd have to get sent away,
i was wondering if their is a place to send it to get fixed or it it fixable ?
atm im having to charge another battery with a docking station and swap battery's because it wont charge,
it did work a little earlier on today, charging. but i can see the insides are pretty well destroyed.
it looks like the piece can be removed and a new one soldered on,
any ideas ?
thanks.
Honestly, if somone on here knows how to fix hardware issues I am sure they can lend you a hand but otherwise you will have to go to a repair shop and have it serviced. Just make sure that everything is complete stock and bootloader is in locked state just to be safe. If you don't want to send it back through the mail you can always take to a sprint authorized repair shop.
If you want to attempt it yourself here you go
http://www.youtube.com/watch?v=jxiv3x88eRg
http://www.youtube.com/watch?v=fdxrPWrVgR8
http://www.youtube.com/watch?v=I-HlZQKQzoQ
http://www.ebay.co.uk/itm/New-HTC-E...K_Replacement_Parts_Tools&hash=item20ca337adf
Thanks guys, ive been looking online and some places seem to say they can fix it,
that video is just jokes, he faffs around with the thing im sure he ha no idea what hes doing.
ive found usb ports for other htc models just not the evo 3d.
ive realised it is quite a common problem
its charging via my docking station... just. obviously the internals of the micro usb are mashed up, and i know the replacement needs to be soldered on,
ive looked on some websites but cannot find anywhere to fix it.
its ok atm as its charging via dock, and i have a spare battery, also i can just take out my sd card to add stuff but it i rather annoying abd id like it fixed asap.
You could always use WiFi file explorer,of course WiFi is required but you can read and write the sdcard from your ip address,
Signature (Don't ask me for help, couldn't careless if your phone explodes)
strange thing is its connecting via my dock.. and charging, eventho the insides of the micro usb are mashed up..
it wont work with any other cable just in the dock...
im guessing the dock pin is slightly larger thus allowing a connection ?
yup face-palm he had his s3 in back pocket riding bicycle drunk home, fell off bike right on backside, phone taking most the impact.
the screen doesnt seem to be cracked just a small chip on the edge near camera.
he had it in a double sided leather padded case so we dunno how it got chipped
very small crack on body above usb port, but i think that crack is common.
the main point being the phone will now not switch on, is not charging or accessible via usb. no led nothing. button combo's do nothing. battery change no help
do you guys reckon it'll b worth replacing the usb port? or just a spares repo?
you can't replace the usb port unless you buy a motherboard, desolder one from there and solder it on your old one, which obviously doesn't make sense and won't work anyway, because the phone is clearly broken. The phone would switch on if the port was broken if there was any charge in the battery
Glebun said:
you can't replace the usb port unless you buy a motherboard, desolder one from there and solder it on your old one, which obviously doesn't make sense and won't work anyway, because the phone is clearly broken. The phone would switch on if the port was broken if there was any charge in the battery
Click to expand...
Click to collapse
well you can just buy the usb ports from part stores.
and yup i made another face-palm, its not the usb as a fully charged battery wont power it lol
im just gonna assume when he landed on it he just bent the motherboard and crushed something/many parts lol.
kinda strange he damaged the internal parts but not the screen.
he bought it like 6months ago so i doubt samsung or t-mobile will help eh.
oh well, what divv rides a bike with an s3 in theyre back pocket?