Related
Hey guys, I did a search for my issue, but found no relevant solutions.
I am using a much older ROM, Gingerblur 3.1 with v 1.83 and I just bought a new lapdock. The funny thing is, all the instructions came in Spanish, but I don't think that would necessarily be the issue. The weird thing is when I open it with phone plugged in, it does not go into lapdock mode, but on the phone I get prompted to go into Webtop or multimedia mode. I go into Webtop mode and it looks like how the lapdock mode should look, however, I can not use the touchpad or a USB mouse that I plugged in. However, on the phone screen itself, it shows a mouse pad essentially, and option to go to keyboard, so it thinks its only plugged in via HDMI to a screen only. The funny thing is though, if I do not turn the phone screen on by pressing the power button, it says No Signal Input: HDMI, which implies that it knows a phone is connected via USB since that screen does not come up when the phone is plugged in. I am also not using a case so I know it is firmly plugged in with no obstructions. Someone else had the same issue with a different ROM in this thread:
http://forum.xda-developers.com/showthread.php?t=1598132&page=2
Please help! Is this a ROM issue? I was planning to switch over to the NottachTrix4G ROM, but it seems the same issue may be occurring there. I think I still have 30 days to return it, but I would love to resolve the issue. Any thanks would be much appreciated.
I had this problem. You buy from onesaleaday? Sent mine to Motorola for repair. Defective USB connector. Thread is in accessories forum. Moto couldn't find serial number in their system, but they took care of me.
Probably your documentation is in Brazilian Portuguese.......not Spanish. Look same but not same.
It is not a ROM issue.
Sent from my MB860 using xda premium
CaelanT said:
I had this problem. You buy from onesaleaday? Sent mine to Motorola for repair. Defective USB connector. Thread is in accessories forum. Moto couldn't find serial number in their system, but they took care of me.
Probably your documentation is in Brazilian Portuguese.......not Spanish. Look same but not same.
It is not a ROM issue.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is in Spanish for sure, I can read Spanish. I bought it on Amazon from some reseller who had only one in stock from Bakersfield CA, which is a 2 hour drive from me. Thought it was a good idea. Should I return it? Or can Motorolla help me out with a product I did not buy from them?
I really feel like the USB is not defective, or that it at least is detecting my USB connection since it prompts the message about NO HDMI cable in place, which cannot be achieved unless the phone is plugged in. Obviously you can't test with just the USB connection alone and no HDMI, but my IT spidey senses are tingling. Could you link me to the thread you were referring to? I was looking for it but I could not find it.
banes said:
It is in Spanish for sure, I can read Spanish. I bought it on Amazon from some reseller who had only one in stock from Bakersfield CA, which is a 2 hour drive from me. Thought it was a good idea. Should I return it? Or can Motorolla help me out with a product I did not buy from them?
I really feel like the USB is not defective, or that it at least is detecting my USB connection since it prompts the message about NO HDMI cable in place, which cannot be achieved unless the phone is plugged in. Obviously you can't test with just the USB connection alone and no HDMI, but my IT spidey senses are tingling. Could you link me to the thread you were referring to? I was looking for it but I could not find it.
Click to expand...
Click to collapse
Mine was doing exact same thing. There is a known issue where connectors, especially USB in lapdock do not stick out far enough to make a good connection. I called Motorola, they arranged overnight shipping both ways, no problems. Had it back in a week fully functional.
http://forum.xda-developers.com/showthread.php?t=1583678
Sent from my MB860 using xda premium
CaelanT said:
Mine was doing exact same thing. There is a known issue where connectors, especially USB in lapdock do not stick out far enough to make a good connection. I called Motorola, they arranged overnight shipping both ways, no problems. Had it back in a week fully functional.
http://forum.xda-developers.com/showthread.php?t=1583678
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Turns out mine starts with a serial number starting with a B, but all the localization is for Mexico according to the packaging. Gonna try to see whats up with a warranty.
Edit: My B serial number was in the system, and I have files a warranty replacement request, thanks so much for your help CaelanT!
banes said:
Turns out mine starts with a serial number starting with a B, but all the localization is for Mexico according to the packaging. Gonna try to see whats up with a warranty.
Edit: My B serial number was in the system, and I have files a warranty replacement request, thanks so much for your help CaelanT!
Click to expand...
Click to collapse
Glad I could help.
As an added note for anyone else, the shipping is handled better if you have them set up the RMA over the phone, and do not set it up yourself online.
They actually told me this themselves when I called them. I have to say, I was pleasantly surprised at the customer service being as good as it was.
CaelanT said:
Glad I could help.
As an added note for anyone else, the shipping is handled better if you have them set up the RMA over the phone, and do not set it up yourself online.
They actually told me this themselves when I called them. I have to say, I was pleasantly surprised at the customer service being as good as it was.
Click to expand...
Click to collapse
oh **** really? i already put in my order ****, now i gotta call them
edit: well i called them and they said that it didnt matter how it was scheduled, it would be processed the same way
CaelanT said:
Mine was doing exact same thing. There is a known issue where connectors, especially USB in lapdock do not stick out far enough to make a good connection. I called Motorola, they arranged overnight shipping both ways, no problems. Had it back in a week fully functional.
http://forum.xda-developers.com/showthread.php?t=1583678
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I returned my lapdock to Motorola and got it back, and it STILL did not work.
ToonShadow said:
Try flashing the 2.3.6 fixed webtop from here
http://forum.xda-developers.com/showthread.php?p=24472332#post24472332
Click to expand...
Click to collapse
however, this solution actually resolved it for me, I should have trusted my IT sleuthing skills because I knew the USB connector was working since it was charging properly, let that be a lesson to anyone else searching for a solution, if your phone is charging while plugged in, the USB connector is working properly, this is probably related to the fact that I am using nottachtrix4g which I have seen mentioned before as an issue
I had posted previously that not charging was an indication of USB failure. None of the normal USB functions were working for me. My apologies if I sent you down the wrong road.
Sent from my MB860 using xda premium
no problem, I appreciate your help, but just wanted to offer another solution for people who may be searching for a solution to this same problem and stumble across this thread
banes said:
I returned my lapdock to Motorola and got it back, and it STILL did not work.
however, this solution actually resolved it for me, I should have trusted my IT sleuthing skills because I knew the USB connector was working since it was charging properly, let that be a lesson to anyone else searching for a solution, if your phone is charging while plugged in, the USB connector is working properly, this is probably related to the fact that I am using nottachtrix4g which I have seen mentioned before as an issue
Click to expand...
Click to collapse
I sent mine to Motorola as well and got it back with a message that there was not a problem with the device. I was running stock Atrix when I first tested. Nottachtrix didn't work for me either.
I was under the assumption that the Lapdock was simply a HDMI monitor and USB Host. Have since installed CM10 (epinter) and still experiencing the same issue.
**Ninja Edit: Yes I'm a noob
I connect my lapdock and it works. After a few minutes the display still works but the keyboard/trackpad are unresponsive. Any ideas?
Just wanted to post up another suspected failure - i just received my atrix(Hebrew edition) lapdock from Ben's Outlet - no charging on the usb port with my bionic (dismantled the dock location to connect the wires before modifying the casing)
I'm guessing after all the reading in the forums I've done that the only option is to warranty claim with Motorola ?
I also noticed i have no serial sticker on the bottom(but do have the hologram and another model number sticker) - I'll have to check the box for the serial unless there's another way to get the serial number?
Thanks for posting up this discussion! Saved me hours of banging my head against a wall, i really wish the thing was working though...
Hi, I have the Galaxy Note i717 and had to replace my charging port as it had stopped charging reliably. I bought one of the many on ebay for around 8 bucks. I proceeded to put it in when I received it but to my dismay I no longer could get service at all, just wifi. So just to verify it was nothing I broke I put the old pcb back in and service returned. At that time I believed it was just a defective unit, so second try at it same thing no service old one works fine. Is this a problem anyone has ran into before? Any help I would appreciate.
jpeeler said:
Hi, I have the Galaxy Note i717 and had to replace my charging port as it had stopped charging reliably. I bought one of the many on ebay for around 8 bucks. I proceeded to put it in when I received it but to my dismay I no longer could get service at all, just wifi. So just to verify it was nothing I broke I put the old pcb back in and service returned. At that time I believed it was just a defective unit, so second try at it same thing no service old one works fine. Is this a problem anyone has ran into before? Any help I would appreciate.
Click to expand...
Click to collapse
It is quite possible that either your new port is the wrong part, or is damaged.
The port wiring is different between models ...I.E. SGH-I717, N7000, and other note models.
Even the charge cables are different part numbers between models, but visually look identical.
It just sounds like the port wiring is different to me ..
I suggest getting the port directly from samsung...even though it will cost a bit more.
At least then you have a fall back if the port won't function.
Or perhaps have the port repaired by Samsung directly ....
I'm sorry I can't offer more help .g
gregsarg said:
It is quite possible that either your new port is the wrong part, or is damaged.
The port wiring is different between models ...I.E. SGH-I717, N7000, and other note models.
Even the charge cables are different part numbers between models, but visually look identical.
It just sounds like the port wiring is different to me ..
I suggest getting the port directly from samsung...even though it will cost a bit more.
At least then you have a fall back if the port won't function.
Or perhaps have the port repaired by Samsung directly ....
I'm sorry I can't offer more help .g
Click to expand...
Click to collapse
Well both pcb boards that they sent me have the same markings as the one I removed. They also say on them SGH_I717_SUB_REV1.0_1107
So I do believe it to be the correct part. Just to clarify the new boards do charge the phone just cellular service stops. Maybe by some crazy luck I got two faulty boards. I wasn't sure they were going to send me a replacement so I ordered from another company as well so I guess I will have to see if that one works,
Interesting ....
The part seems okay ...
And the odds of two bad ports in a row is remote at best ....
Some time ago I saw a thread about an extra wire that traveled down from the antenna to the charging port....
And users were reporting that this very small wire was being damaged or missed when the port was serviced.
I've never seen this wire or connection ......but I figured I'd bring it up ..
Try a general search on the topic ...and see if it yields a result.....
I just remember it being a big deal ....g
Just wanted to update the post in case this happens to anyone else. After getting the free replacement for the first part I believed to be defective I also ordered from another company as it took more than a month for my replacement, so I believed them to had stood me up. Well the one from the other company arrived today, and worked. Maybe the others were for different networks or something. I don't know if that is possible Rogers vs ATT frequencies and what not but it worked and all is well.
jpeeler said:
Just wanted to update the post in case this happens to anyone else. After getting the free replacement for the first part I believed to be defective I also ordered from another company as it took more than a month for my replacement, so I believed them to had stood me up. Well the one from the other company arrived today, and worked. Maybe the others were for different networks or something. I don't know if that is possible Rogers vs ATT frequencies and what not but it worked and all is well.
Click to expand...
Click to collapse
I am having issues as well...
My phone has a Rev1.0_1107 part, and I cannot charge unless I play with the cable, so i decided to replace this port.
1st was from China (ebay) and received no signal, only wifi. Rev1.0_1107
2nd was a replacement from the same company, same issue. Rev1.0_1107
3rd was from a place in CA (ebay) and is Rev2.0_1206 and same issues.
I can put my original part in there, and I get signal just fine... anybody have any ideas on this matter? It's frustrating to have to keep battery swapping and would like to get this fixed.
MisterLas said:
I am having issues as well...
My phone has a Rev1.0_1107 part, and I cannot charge unless I play with the cable, so i decided to replace this port.
1st was from China (ebay) and received no signal, only wifi. Rev1.0_1107
2nd was a replacement from the same company, same issue. Rev1.0_1107
3rd was from a place in CA (ebay) and is Rev2.0_1206 and same issues.
I can put my original part in there, and I get signal just fine... anybody have any ideas on this matter? It's frustrating to have to keep battery swapping and would like to get this fixed.
Click to expand...
Click to collapse
The one that finally worked for me was from ebay company (no.1-tech) also china but has been operating flawlessly for sometime now.
jpeeler said:
The one that finally worked for me was from ebay company (no.1-tech) also china but has been operating flawlessly for sometime now.
Click to expand...
Click to collapse
Noted... thanks. I have searched them out and they only appear to have the cable for the N7000. Can anyone else recommend a place to buy these from?
Just noticed that when it's near my window, I get 1 bar of service... So it's like my signal strength is uber weak. I have a microcell in my home, and it is functioning properly (other ATT phones are connecting just fine) and works again as soon I put the original cable back.
Hi,I have a samsung Note N7000.
I'm have a similar issue,start with high power charging issue every 5seconds.I bought a replacement from ebay company in New Jerse it fixed that problem.but it created a problem when I make a call the other end can not hear me.I email the company and they sent #2 replacement.after
the charging port board was installed now I dont have any signal for service.the pcb# N7000/i9220_sub_Rev1.0.
I'm going try different company.what should I be looking for?I'm wasting too much time on this.
johnson1828 said:
Hi,I have a samsung Note N7000.
I'm have a similar issue,start with high power charging issue every 5seconds.I bought a replacement from ebay company in New Jerse it fixed that problem.but it created a problem when I make a call the other end can not hear me.I email the company and they sent #2 replacement.after
the charging port board was installed now I dont have any signal for service.the pcb# N7000/i9220_sub_Rev1.0.
I'm going try different company.what should I be looking for?I'm wasting too much time on this.
Click to expand...
Click to collapse
Having exact the same problem.. just a moment ago I tried the third board and still hacing exact same problem, no signal or one bar only when I have one bar I can make a call but the other end can not hear me
gregsarg said:
Interesting ....
The part seems okay ...
And the odds of two bad ports in a row is remote at best ....
Some time ago I saw a thread about an extra wire that traveled down from the antenna to the charging port....
And users were reporting that this very small wire was being damaged or missed when the port was serviced.
I've never seen this wire or connection ......but I figured I'd bring it up ..
Try a general search on the topic ...and see if it yields a result.....
I just remember it being a big deal ....g
Click to expand...
Click to collapse
Sorry to bring up an old thread but I wanted to bring this to others attention. What Gregsarg said about a white wire running down from the antenna is correct, or at least it is on an i717. It runs down from the right hand side of the board, behind where the flex board connects and onto the little round connector on the flex board, it's probably that that's been missed off of some phones as would be noticed by only getting 1 bar of signal! I've also noticed that the UK version of the note only has 4 brass connectors on the flex board 2 for the antenna and 2 for the speaker whereas the i717 has 5, 3 for the antenna and 2 for the speaker. I'm not sure what the difference is between a white or black i717 to be honest, i'd have thought it would only be the outer casing that had changed, I can't see them changing parts too, that just sounds stupid!
Anyway, the reason I'm posting is not just because of the above, it's because i'm in the middle of fixing an i717 for someone and was searching to see if a N7000 part would fit and although it looks as though it would I'm not willing to test that theory! I will say though that the missing brass connector is also connected to brass connector 2 on the Ariel/speaker module but on the flex board that connector also has a resistor above it which would likely cause an issue!
The part that i'm ordering is from a company in the UK but is a Rev 2.0 board and not the rev 1.0 that is in it already so i'm hoping that's not an issue else i'm gonna have to buy from China which is cheaper but will likely take an age to get here and the customer wants it done ASAP so what they want they get! I will update this thread once i've fitted the part and got it running along with a link to where I got it from.
h4x0rm1k3 said:
Sorry to bring up an old thread but I wanted to bring this to others attention. What Gregsarg said about a white wire running down from the antenna is correct, or at least it is on an i717. It runs down from the right hand side of the board, behind where the flex board connects and onto the little round connector on the flex board, it's probably that that's been missed off of some phones as would be noticed by only getting 1 bar of signal! I've also noticed that the UK version of the note only has 4 brass connectors on the flex board 2 for the antenna and 2 for the speaker whereas the i717 has 5, 3 for the antenna and 2 for the speaker. I'm not sure what the difference is between a white or black i717 to be honest, i'd have thought it would only be the outer casing that had changed, I can't see them changing parts too, that just sounds stupid!
Anyway, the reason I'm posting is not just because of the above, it's because i'm in the middle of fixing an i717 for someone and was searching to see if a N7000 part would fit and although it looks as though it would I'm not willing to test that theory! I will say though that the missing brass connector is also connected to brass connector 2 on the Ariel/speaker module but on the flex board that connector also has a resistor above it which would likely cause an issue!
The part that i'm ordering is from a company in the UK but is a Rev 2.0 board and not the rev 1.0 that is in it already so i'm hoping that's not an issue else i'm gonna have to buy from China which is cheaper but will likely take an age to get here and the customer wants it done ASAP so what they want they get! I will update this thread once i've fitted the part and got it running along with a link to where I got it from.
Click to expand...
Click to collapse
When getting the part, Revision usually does matter. Also the serial number under the revision number (Usually starting with DRC or DRG) can also matter. Getting the identical one is usually the best bet (albeit not the easiest considering people on ebay use stock images and don't show you the ACTUAL part you're getting.)
KaboodleMoon said:
When getting the part, Revision usually does matter. Also the serial number under the revision number (Usually starting with DRC or DRG) can also matter. Getting the identical one is usually the best bet (albeit not the easiest considering people on ebay use stock images and don't show you the ACTUAL part you're getting.)
Click to expand...
Click to collapse
I got the new part this morning, it was a REV 2.0 board and after putting it all back together including the white/grey ariel wire I can report that it's working perfectly, as good a signal as it had before and is now charging properly. The link to the UK based seller is here for anyone interested that needs a replacement in the UK - http://www.ebay.co.uk/itm/300819833823?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 The part is £19.99 with no P&P and arrived in 1 day. Just in case the link doesn't work then the name of the supplier is gravedigga1.
EDIT:- I heard back from my customer today who has reported having problems with wifi, signal and loudspeaker! Therefore the Rev 2.0 part won't act as a decent replacement for the Rev 1.0 unfortunately. I wasn't able to fully test as the customer didn't leave his sim card in and he uses 1 of those weird networks which I don't have a sim for. I have managed to source another UK supplier on ebay for an even cheaper price of £12 and they verified that it is a Rev 1.0 board they have in stock and have put 1 aside for me. Once I know that one works for definite i'll report back again just to update the thread but this time the customer is bringing the phone when the new part is here so it can be tested fully before it goes back to him!
I just find it strange that even though the Rev 2.0 is exactly the same in every way as the Rev 1.0 board that it has these issues although i've not heard of the loudspeaker problem before so I think there's a fault with it anyway.
Yeah these notes are getting really dodgy in their old age. We've decided to basically not fix abutting except the screens anymore because getting the right parts is a nightmare.
Sent from my DROID BIONIC using xda app-developers app
This may be a little off key here and if I'm in the wrong thread I apologize but...
I have the i717, bought the charging port off of eBay and replaced it. After plugging in the phone the touch keys at the bottom lit up like I was in business. After allowing the phone to "charge" for about 2 hours, the touch keys were the only thing to work and light up on the phone. I could press the lock key on the side and the touch keys would come off and on like it was on the lock screen but the screen was black. Has anyone encountered this before? If so, please help!
Thank you
Btw, it seemed like the phone was charged/charging bc those touch keys were on...
samsung sgh-i717 usb port
Well I have tried three different suppliers and I have not found a board that works correctly . Some boards that network strength is weak , some boards the microphone doesn't work , some boards that speaker won't play . I have reinstalled my original board back in my phone and every time it returns back to working properly. I just need the USB /charge port to work . Please if you have any ideas let me know ib6469 @ yahoo . com . Thank you very much for or help
Pease Help..i717..charge port
Hello ,
My name is Russ and I have a Samsung Galaxy Note SGH-i717 ( AT&T ) which I love . About two months ago the charge port quit working , so I ordered one from Ebay ( Flex cable , Mic/USB board ) , installed it and my signal was weak after installing it so I reinstalled the original board and it went back to full power . I thought it was a bad board , so they sent me another , I installed board #2 and the speaker on the back had no sound , put my board back in and the speaker went back working . So I had the supplier send me another board #3 . I got it installed , and the Mic wouldn't pick up , I put my board back in everything goes back to normal . So I thought it might be the supplier , so I tried a different supplier , same thing . In total I have tried three different suppliers and I lost count on how many boards I have installed .. Every time I can reinstall the original board and it will stop whatever it's doing wrong . My board Number is SGH_I717_SUB_REV1.0_1107 , DRBL12IN BF , 69 . I am at a lost , I don't know if there's something I'm doing wrong . Thank You for your time ib6469 ( Russ )
same issu
Please let me know if anyone has had any luck finding a board that works... i am in the exact same boat... email me at bnanda0827 at yahoo.com
ib6469 said:
Well I have tried three different suppliers and I have not found a board that works correctly . Some boards that network strength is weak , some boards the microphone doesn't work , some boards that speaker won't play . I have reinstalled my original board back in my phone and every time it returns back to working properly. I just need the USB /charge port to work . Please if you have any ideas let me know ib6469 @ yahoo . com . Thank you very much for or help
Click to expand...
Click to collapse
note charching port
hi
i purchase this part from 6 different company but same problem no signal charging port works ok.
any boby have solution please let me know.its very annoing.
joe
zia_uddin said:
hi
i purchase this part from 6 different company but same problem no signal charging port works ok.
any boby have solution please let me know.its very annoing.
joe
Click to expand...
Click to collapse
So it looks like basically fixing the charge port on a galaxy note just isn't going to hapen if you want service. Nobody has found a solution?
hello to comunity,
i have the samsung galaxy s 2 gt-u9100 mobile phone and everything was perfect untill i opened the phone, the phone has problem at the back housing so i ordered a new one and replaced it, i made everything with caution and slowly. while i changed the back housing i opened the phone and everything was good untill i saw that there was no signal. i did it 2g and i see that there is onlu on raw ar the signal and sometimes none.
i opened the phone again and checked everything but saw nothing wrong. as i searched i saw that the GSM is this part and the cable that connects the antenna is this one . both of them are perfect.
i lost all my day trying with that , at start i had SlimRom 2 then i put the stock one via Odin but it didnt boot, stocked in the boot image (didnt wanted to search why ) so i flashed kernel again and then NeatRom, still no signal and then i went back to SlimRom. but the problem as i saw is not from the rom .
if anyone knows about that thing and tell me what to do i would be gladfull .
That bit is the antenna c/w speaker.There is a thread related to this about usb replacement.People mention about similar problems when they remove the antenna cable.
Heres a pic of spares I have,and look at the gold contacts on the antenna,as they need to be in good contact with the ones on the usb board.Maybe its that,or maybe new antenna is faulty.Try your old one in to eliminate that though.It could even be the antenna cable.
The thread is by someone whos name is Dugud,or similar
Edit:was close,this is it
http://forum.xda-developers.com/showthread.php?p=47066876
theunderling said:
That bit is the antenna c/w speaker.There is a thread related to this about usb replacement.People mention about similar problems when they remove the antenna cable.
Heres a pic of spares I have,and look at the gold contacts on the antenna,as they need to be in good contact with the ones on the usb board.Maybe its that,or maybe new antenna is faulty.Try your old one in to eliminate that though.It could even be the antenna cable.
The thread is by someone whos name is Dugud,or similar
Edit:was close,this is it
http://forum.xda-developers.com/showthread.php?p=47066876
Click to expand...
Click to collapse
thanks a lot for your reply my friend, my problem is not with the usb think i thing, it must be with the cable or i dunno. i had verry good signal and everything was working, now just the signal got verry low.
exept from buying repair part you say there is no fix right?
leonleonleon said:
thanks a lot for your reply my friend, my problem is not with the usb think i thing, it must be with the cable or i dunno. i had verry good signal and everything was working, now just the signal got verry low.
exept from buying repair part you say there is no fix right?
Click to expand...
Click to collapse
maybe take it to a shop with someone who knows what they are doing. I just had to do this with mine, I considered trying to get parts cheap and diy then I considered how much time and stress it could cause me = not worth it. It cost me £25 to have usb replaced, second thing I checked was the signal as I see many having problems with this - outcome is my phone is working sweet again and it only took a couple of hours of my time :cyclops:
Best of luck
Did you read that thread?.I seen a post on here once where someone said they removed that white antenna cable,then refitted it,and lost signal.Then they bought a new cable,which solved the problem.
Also, you dont know the condition of the part you changed,and theoretically you are meant to use anti static wristband and mat when your touching sensitive electronic components......lol
Sent from my SM-T210 using xda premium
theunderling said:
Did you read that thread?.I seen a post on here once where someone said they removed that white antenna cable,then refitted it,and lost signal.Then they bought a new cable,which solved the problem.
Also, you dont know the condition of the part you changed,and theoretically you are meant to use anti static wristband and mat when your touching sensitive electronic components......lol
Sent from my SM-T210 using xda premium
Click to expand...
Click to collapse
I finaly solved after 10 hours of trying. a did the patern that this guy did and it worked perfectly, but i still cant underestand what made this problem.
http://youtu.be/2Y6k5t1f7Qk
Hi Devs
I want to know if we can switch the complete EFS between phones.
Actually i have got 2 same phones consider X & Y. X is my primary phone and i have modified it alot. And now it got some display glitches so i want to switch to Y.
But the main thing is X is registered with college wifi on CYBERROAM. And if i switch phones i have to again proceed with alot of college formalities to get Y registered.
So, i want to port the complete Rom backup including wifi mac adress, ip adress, imei, etc. of X to Y and of Y to X.
Is this possible if i restore the complete backups including efs data of X in Y & of Y in X.
Both the phones are GS5(international) having TWRP installed and of course rooted. X is running GS7 rom.
Developers plz reply...
Dr. TaNn said:
Hi Devs
I want to know if we can switch the complete EFS between phones.
Actually i have got 2 same phones consider X & Y. X is my primary phone and i have modified it alot. And now it got some display glitches so i want to switch to Y.
But the main thing is X is registered with college wifi on CYBERROAM. And if i switch phones i have to again proceed with alot of college formalities to get Y registered.
So, i want to port the complete Rom backup including wifi mac adress, ip adress, imei, etc. of X to Y and of Y to X.
Is this possible if i restore the complete backups including efs data of X in Y & of Y in X.
Both the phones are GS5(international) having TWRP installed and of course rooted. X is running GS7 rom.
Developers plz reply...
Click to expand...
Click to collapse
I don't think that its possible to get internet access on another phone just by changing or flashing software.
Usually the registration process works by adding your "Wireless Mac Id" which is unique for every device and is determined by the hardware wireless chip inside your device.
So until or unless you can replace your wifi device from your older mobile to your working mobile. You can't change your mac id that is registered in college server.
Sent from my SM-G900H using Tapatalk
redhotiron2004 said:
I don't think that its possible to get internet access on another phone just by changing or flashing software.
Usually the registration process works by adding your "Wireless Mac Id" which is unique for every device and is determined by the hardware wireless chip inside your device.
So until or unless you can replace your wifi device from your older mobile to your working mobile. You can't change your mac id that is registered in college server.
Click to expand...
Click to collapse
But wat if i chang the wifi mac using the "phone id changer"??
I dont know about the possibility of that. As it's printed on the hardware level just like the IMEI code. But, you can try it if it can change your wireless mac id.
Although I doubt it would work.
Sent from my SM-G900H using Tapatalk
redhotiron2004 said:
I dont know about the possibility of that. As it's printed on the hardware level just like the IMEI code. But, you can try it if it can change your wireless mac id.
Although I doubt it would work.
Click to expand...
Click to collapse
Thanx alot fo ua concern n superfast reply
redhotiron2004 said:
I dont know about the possibility of that. As it's printed on the hardware level just like the IMEI code. But, you can try it if it can change your wireless mac id.
Although I doubt it would work.
Click to expand...
Click to collapse
Actually the matter is after alot of search in different forums i found out that -:
The display glitch i was talking about in X, is juz 50% probable of hardware issue.
If u can hlp me find it out..- whenever i decrease the brightness level to the lowest possible, the lower portion starts to flicker out; sometimes followed by yellowish green or greenish yellow color.
It doesnt happen when i set the brightness is set above 10%.
Wat may be the possible causes??
I hav tried disabling hardware overlays in Developer Options. -- Unsuccessful.
Dr. TaNn said:
Actually the matter is after alot of search in different forums i found out that -:
The display glitch i was talking about in X, is juz 50% probable of hardware issue.
If u can hlp me find it out..- whenever i decrease the brightness level to the lowest possible, the lower portion starts to flicker out; sometimes followed by yellowish green or greenish yellow color.
It doesnt happen when i set the brightness is set above 10%.
Wat may be the possible causes??
I hav tried disabling hardware overlays in Developer Options. -- Unsuccessful.
Click to expand...
Click to collapse
It's hard to say what could cause that problem but it certainly is not related to software. Until or unless you have installed something that could interfere/change your display parameters on your rooted mobile.
Although, I have seen certain glitches and flickers on many models due to the faulty flex cabel that connects the display to the motherboard. Its not that costly to replace. Although, I would recommend that you show this to a mobile repair shop and ask him about the problem.
It doesn't sound like a big issue to me. Probably just a flex cabel issue.
Sent from my SM-G900H using Tapatalk
redhotiron2004 said:
It's hard to say what could cause that problem but it certainly is not related to software. Until or unless you have installed something that could interfere/change your display parameters on your rooted mobile.
Although, I have seen certain glitches and flickers on many models due to the faulty flex cabel that connects the display to the motherboard. Its not that costly to replace. Although, I would recommend that you show this to a mobile repair shop and ask him about the problem.
It doesn't sound like a big issue to me. Probably just a flex cabel issue.
Click to expand...
Click to collapse
Ok.. Lemme giv it a try.. I ll inform u baut d result
Hi everyone. Hoping to post in the right section.
Anyway, I'm going to send back my OnePlus 3 to get my GPS antenna repaired (and maybe to get a new battery as well).
I can't open my Op3 (unscrew, remove the display, ecc) as, I guess, I'd void the warranty.
So, is there a software way to get the serial number or any identification number of GPS antenna and, maybe, battery?
I just want to be 100% sure that the GPS antenna will be changed (and fixed I hope), and that my Op3 won't get just a clean flash or so.
I've already tried 6 or 7 common apps that show hardware info, but no luck.