My Acro S is running a stock 6.1.A.2.45 with CWM, rooted an bootloader unlocked, it has been working fine with this firmware for almost 2 weeks, today out of nowhere i switch the phone off for a reboot and it refuses to come on, it can go into fastboot and and flashboot however it does not power on, it's been plugged in the charger for almost an hour but it dosen't show any sign of life, no led blinking no Sony logo, nothing and when i try to force reboot by holding up and power off it just gives a little vibration and nothing happens, please help! sending back to the service center is not an option as in my country Sony service is crap as it's done through a third party company that hire retards exclusively, not to mention that they will rip me off as i got my phone from another country.
Does it enter CWM? If nothing works Flash the same ROM using flashtool
Sent from my ST25i using Tapatalk 2
Rapier07 said:
Does it enter CWM? If nothing works Flash the same ROM using flashtool
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Nothing mate, no led, no log, no nothing as i said it just vibrate when i force reboot and can go into flash/fastboot mode, anyway the battery was almost dead when i turned it off to reboot and now i am not sure if it's charging to begin with hence why i am too scared to flash it and risk permanent bricking, do you think i should leave it for a while on the charger first?
Also would it be too much if i ask for a link to the stock rom as the one i had is not on this pc anymore?
Yeah you should leave it for charging for an hour or two.
I'm not too sure about the link. Browse through the dev section you'll find one
Sent from my ST25i using Tapatalk 2
Rapier07 said:
Yeah you should leave it for charging for an hour or two.
I'm not too sure about the link. Browse through the dev section you'll find one
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Okay thanks,
Regarding the ftf i don't think that it has been posted before, the one on my phone is russian and i don't recall where i got it from, i found another that's Malaysian however i really need the international version this time, do you think i should start a thread requesting it?
Okay i fixed it however the flashing didn't work and until now for the life of me i am trying to figure out what happened, anyway here is what happened and how i got it back working, maybe it will help someone in the future.
1.The first 2 flashing attempts failed without any explanation in the log, i then tried to re-install the flashtools drivers and went for a 3rd attempt, this one did not fail although it did not succeed either it remained stuck on retrieving device information.
2.I went to Sony software update standalone software, it requested from me to put the device into flash mode, i did but then it refused to update as my device had modified software, then i went to the pc companion and made an attempt to fix the device but of course i got the infamous server busy error.
3.My last hope was to go into fastboot mode and attempt to flash back the stock kernel.sin, that did the trick, the phone went back up and as i suspected it wasn't charging during the incident as the battery was down to 1% and it turned off as soon as it went on, it's now turned on and charging without any issues however i am really curious to find out what happened, i will charge the phone back to 100% then i will flash back the previous kernel that caused the issue,
For reference both kernels are found in this thread:
http://forum.xda-developers.com/showthread.php?p=30276627&postcount=7
Good that its working now
Sent from my ST25i using Tapatalk 2
Rapier07 said:
Good that its working now
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
It happened now again after i tried to boot into recovery using the xparts app, i had to reflash the kernel to unstuck it and this time i flashed the old kernel that had CWM, the one that initially got stuck and everything is back to normal, but i am really curious to know what's wrong.
Did you ever find out what was wrong with it? My phone won't charge no matter what I do to it. Kernels, stock ftfs, all custom roms I could find. I'm thinking about replacing the battery cause I can't keep the phone on for more than a few seconds....
Related
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Robbey said:
i tried flashing it and ionstalling a rom for the first time but it froze halfway through for like 3 hours so i just unplugged it and now this screen comes up...
no whenever i turn it on it gives me a screen with :
a phone .... an explanation mark in a triangle ! . .. . a computer
anything i can do?
also ive tried every button trick on trying to restore it and none of it works all of it just come with that screen. except for the download one where i press volume down home button and power
Click to expand...
Click to collapse
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
well... if you've tried "every" (its not like there are a lot) button combination... then just go buy a jig from ebay and force it into download mode...
Matriak31 said:
you are really not giving a lot of details here...all you are saying you tried installing a rom and then it froze halfway..
Are you rooted firstly?
If you are have you flashed CF-root kernel?
How did you try to install the rom?
More info and then more people can help you out buddy..see if you can get into recovery and restart your phone.
Click to expand...
Click to collapse
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
anyone else seeing an increase in the "i bricked my phone" threads?
dont think its coincidence they are increasing after the american variants have been released. People need to check what model they have before flashing things.
OP: not saying thats what has happened to you as you dont say if you have the i9100 or not, hopefully you do.
bruflot said:
Nothing from what you said would help..
He obviously flashed it with Odin, and he said he's getting a yellow triangle with a computer behind it..
From what I understood, he could get into download mode.
So just boot into download mode and flash stock ROM. That should do it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Matriak31 said:
well from what he said by his post did not make sense at all..hence why i asked for more details to explain so i could give him a better explanation and guide to fix his problem...but you seem to get what he said so by all means do your thing....but if he comes back with more detail then i will point him to the right direction on what he needs to do...at the end of the day the more opinions he has the better for him
Click to expand...
Click to collapse
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
bruflot said:
Yes of course
Btw, never ment to insult you in any ways
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
its ok and same goes by my post as well buddy..we all been in his position one way or the other
1st - Your phone is not bricked if it show an image. Whatever image it is. The only real software way to brick your phone is to flash bad bootloader or stop a bootloader while they are being flashed. However, Bootloader are flashed first. So if your phone stoped half way, you should not have trouble too much.
Remove the battery from your phone for like a minute, then reboot your phone in download mode (vol- + home + power and when the phone light up, release power.) Then flash another rom from odin.
Also, what rom did you used ? If you flashed a rom for another phone, then you might have flashed bootloader for that phone on yours, which is bad. In this case you will surely need a JIG.
sorry im new to this whole rooting/flashing thing. i downloaded the lightning rom: http://forum.xda-developers.com/showthread.php?t=1095274
i have never rooted or doneanthing to my s2 before. all i did was follow the instructions on the page and thought it would be all good? it froze about a quarter of the way there in odin so i just took my phone out.
I usually find from this state I can get back to bootloader or download states
push and hold vol+ and home then power for bootloader
push and hold vol- and home then power for download
sometimes the phone can seem to freeze a little or even die (this happened to me loads on the galaxy s and once already on the s2) and removing battery sim etc or attaching the charger can jog it
however as other have said a JIG is your friend if for no other reason that even if you recover without it, custom roms up the rom count which some twitchy carriers might invalidate your warranty for, the jig will reset this
you can get them from ebay for less than £3 delivered, or there are instructions on this site for making them yourself if you are so inclined.
simply search 'galaxy s2 jig' on ebay mine was delivered today from portugal as I am way too lazy to make one and only wanted a counter reset anyway
Hey guys i've a problem with my x10
So one night i was playing with it than the other day the phone would start
so i thought yeah right might be the battery or something. i took it to my friends x10 it was with 87% charged so i exclude this
Than i tried to flash with flashtool a new kernel and i get stuck at 9% or 15% depending on the kernel i use.
With SEUS it starts to repair but it says. No new updates avaiable after a few moments.
Some information regarding my phone
Unlocked Bootloader
FXP KERNEL
MM TEAM MIUI V4
The phone vibrate but doesn't start or load the kernel.
What do i do?!
Srry for my bad english
Thx in advance
Usrle flashtool to reflash kernel or firmware.
already did but i get stuck at 9% or 15% flashing the kernel
I'm downloading a full generic rom x10a
having similar problem
Hi, I had similar problem as well
X10i running FXP CM7 suddenly just wont boot n charge after I turn off the phone
it wont boot after flashing anything (firm or kernel) except the official firm
now that I end up with a cap R bootloader but flashtool claim that bootloader is rooted
do I still keep the bootloader unlock?
i guess you have a locked bootloader since the original firmware is loading just fine even tho rooting has nothing to do with the bootloader it self. i'm only guessing.
I'm stuck at. Flashing Loader
I bricked my phone last week and it got stuck in a boot loop.
I downloaded the x10a generic Stock ROM and flashed it via Flashtool and it worked like a charm.
Hope this helps.
[XBOCT]™ said:
I bricked my phone last week and it got stuck in a boot loop.
I downloaded the x10a generic Stock ROM and flashed it via Flashtool and it worked like a charm.
Hope this helps.
Click to expand...
Click to collapse
But that way you weren't at a brick point.
You get brick when u get those 3 blink red LED and the phone doesn't do anything
By the fact that your phone were able to load the kernel. i guess
same problem repeat
Hi, just confirm that the bootloader remain unlock as long as the flashtool claim its ROOTED
had you try other than official 2.3.3 ftf?
because I just got the same unable to boot problem repeated again
this time cant get boot on even stock 2.3.3 firm
but I was able to boot up and charge on 2.1, then get root, recovery and kernel (w/o unlock bootloader again) and go straight to custom ROM with no problem
mooving said:
Hi, just confirm that the bootloader remain unlock as long as the flashtool claim its ROOTED
had you try other than official 2.3.3 ftf?
because I just got the same unable to boot problem repeated again
this time cant get boot on even stock 2.3.3 firm
but I was able to boot up and charge on 2.1, then get root, recovery and kernel (w/o unlock bootloader again) and go straight to custom ROM with no problem
Click to expand...
Click to collapse
i'm using
X10a_2.1update1_r2.1.A.0.435_Generic.ftf
And it get stuck at Flashing loader
Idk but i can "read" the kernel when i dump the propriets but i can't "right" when i try to flash something
Anyone?
guys?
you said your phone is "bricked"
I'm not sure if you know what that means.
If you say you've bricked your phone then no one can help you.
A brick is a brick. It doesn't matter if it weighs a few kgs or a few hundred grams. A brick can't receive phone calls.
And your phone isn't even a normal brick... You wrote that it's "really bricked"
Are you building a house anytime soon?
LJE said:
you said your phone is "bricked"
I'm not sure if you know what that means.
If you say you've bricked your phone then no one can help you.
A brick is a brick. It doesn't matter if it weighs a few kgs or a few hundred grams. A brick can't receive phone calls.
And your phone isn't even a normal brick... You wrote that it's "really bricked"
Are you building a house anytime soon?
Click to expand...
Click to collapse
maybe i'm wrong idk maybe is a soft brick. thats why i'm asking for some help.
almomdegal said:
But that way you weren't at a brick point.
You get brick when u get those 3 blink red LED and the phone doesn't do anything
By the fact that your phone were able to load the kernel. i guess
Click to expand...
Click to collapse
The red led blinking rapidly three times means the battery is "out of juice".
I've said it earlier: Several X10 devices have reached an age, where battery failures are fairly common due to charge cycles and/or age. Specially if one got it just after the launch.
Anyhow, what you can do, is let the device charge "blindly" for a while, and a while I mean for half an hour to a few hours. Then it should, out of the blue, jump into "active" charging (With the battery screen showing offline charging)
If this doesn't happen you might have to charge the battery externally.
...or even replace the battery.
-"Why?", one might ask.
Reason is that the flash mode only works with a charged battery.
If it empty, it won't engage the flash mode at all. Stupid design, yes, but that is how it is.
Worst thing is, that the battery does deplete/discharge while in flashing mode. That is why it's so important it's fully charged and fully working, before one engages in flashing activities.
See this post for more information about this: http://forum.xda-developers.com/showthread.php?t=1642154
Try wotanserver's flashtool...
http://www.wotanserver.com/en/
Good luck
SysGhost said:
The red led blinking rapidly three times means the battery is "out of juice".
I've said it earlier: Several X10 devices have reached an age, where battery failures are fairly common due to charge cycles and/or age. Specially if one got it just after the launch.
Anyhow, what you can do, is let the device charge "blindly" for a while, and a while I mean for half an hour to a few hours. Then it should, out of the blue, jump into "active" charging (With the battery screen showing offline charging)
If this doesn't happen you might have to charge the battery externally.
...or even replace the battery.
-"Why?", one might ask.
Reason is that the flash mode only works with a charged battery.
If it empty, it won't engage the flash mode at all. Stupid design, yes, but that is how it is.
Worst thing is, that the battery does deplete/discharge while in flashing mode. That is why it's so important it's fully charged and fully working, before one engages in flashing activities.
See this post for more information about this: http://forum.xda-developers.com/showthread.php?t=1642154
Click to expand...
Click to collapse
Didn't work, i even use my friends battery to flash it and it didn't work
almomdegal said:
Didn't work, i even use my friends battery to flash it and it didn't work
Click to expand...
Click to collapse
Well, if the battery issue was fixed, and you're sure the battery is fully charged, then try this: (Quoting from my other post)
I've charged/replaced the battery, and are having trouble with starting up. Earlier flash failed. Now what?
Don't worry. It's pretty darn hard to truly brick this device. Even if the screen remains black, there's still hope.
Once that the battery issue has been dealt with, you can move on:
Download the latest Flashtool and the proper global firmware (FTF-file) for your device from here:
http://forum.xda-developers.com/show...ight=flashtool
1: Extract/Install the Flashtool to a folder of your liking.
2: Copy the ftf-file to the "firmware" folder in the Flashtool folder you just created above.
3: Start Flashtool. Click the Bolt icon (flash). A Window appear. There, choose "flashmode". Cllick OK.
4: A new window appears. In the list on the left, choose the Generic firmware you downloaded and copied into the "firmware" folder. Should have a similar name as the file itself. (Or manually open the ftf-file from the "..." icon on the top right.)
5: Hit "OK. Follow the instructions you get on the screen:
1 - Unplug the device.
2 - Power off the device. (Unplug and replug the battery to be sure it really off, and not stuck in black screen)
3 - Press the "back" putton, and hold it down while performing the next task.
4 - Plug the device into the computers USB.
Click to expand...
Click to collapse
Forced flashing should now start.
Click to expand...
Click to collapse
time to accept the fact that it is really brick
Hi @almomdegal,
if you try flash using another full charge batt n its not work, I think this forum is no longer works for u anymore.
I own a faulty X10 as well, random shut down (no warning at all) then wont boot n charge
reflash it, revive for few days and dead again, and reflash....
now it is really dead, no problem appears and it show flash successful and it just wont boot or charge but vibrate non stop
I just send the phone to service center and the board need to be replace
so its time to send to the real professional to solve it, coz this problem ain't software downloaded from internet can solve anymore
mooving said:
Hi @almomdegal,
if you try flash using another full charge batt n its not work, I think this forum is no longer works for u anymore.
I own a faulty X10 as well, random shut down (no warning at all) then wont boot n charge
reflash it, revive for few days and dead again, and reflash....
now it is really dead, no problem appears and it show flash successful and it just wont boot or charge but vibrate non stop
I just send the phone to service center and the board need to be replace
so its time to send to the real professional to solve it, coz this problem ain't software downloaded from internet can solve anymore
Click to expand...
Click to collapse
yeah i guess so.
I just needed this closure i'll send it to service today
Hello all,
I was already in the possesion of a SGII that has been rooted and flashed before. I came from Hyperdroid Androidmeda with Android version 2.3.6. This morning i took the guess it was a nice day to flash a rom with ICS Android 4.0.x. My choice was the rom Resurrection Remix ics v2.5.2.
I followed the exact instructions to Wipe Data, Dalvic Cache and Wipe Cache partitions before i flashed the rom. This went well, at this moment i didn't get any errors or bugs i.e. At the moment my SGII was booted i discoverd the rom a bit. And i came to the conclusion my camera was not working,eve as my outgoing calls. When i called somebody it rang barely one tone before my phone shutted itself down and rebooted. When i get an incoming call i couldn't see the Green answering button neither i saw the red denial button. So i this was just a guess.
But the main problem: I rebooted my phone manually and then he just shut down. I couldn't get him on anymore. On no circumstance it is possible for me to get my phone on. Battery in and out has no effect. Even connecting my phone with an usb cable with the PC gave no reaction. When i connected it to the charger i saw a blink of the loading battery but after a couple seconds my phone went off. And i dont get him on anymore.
What is wrong, what can i do to solve this?
Enter Download mode and check if Odin sees the phone.
Dude..odin pc is your last hope..never mind..it should work...try flashing a rom from there...
Sent from my GT-S5830 using Tapatalk 2
I did now try to boot it that way.
I see:
Odin mode
Productname: GT-i9100
Custom Binary Download: YES (2 counts)
Current Binary: Custom
[GREEN ANDROID MAN]
Downloading...
Do not turn off target !!
And this is showing to me for at least two minutes. Will this take a while?
Try to flash a rom straight forward.....if it works...it works...nd if it dont...it dont
Sent from my GT-S5830 using Tapatalk 2
Hamstert said:
I did now try to boot it that way.
I see:
Odin mode
Productname: GT-i9100
Custom Binary Download: YES (2 counts)
Current Binary: Custom
[GREEN ANDROID MAN]
Downloading...
Do not turn off target !!
And this is showing to me for at least two minutes. Will this take a while?
Click to expand...
Click to collapse
It's clear you don't know how to use download mode. How did you flash your first ROM or root in the first place???
While in this mode, it is expecting you to connect the phone to a computer and use a flashing tool (Odin/Heimdall/etc) to install software to the device.
You can reboot just by holding the power button down for about 10 seconds.
ctomgee said:
It's clear you don't know how to use download mode. How did you flash your first ROM or root in the first place???
While in this mode, it is expecting you to connect the phone to a computer and use a flashing tool (Odin/Heimdall/etc) to install software to the device.
You can reboot just by holding the power button down for about 10 seconds.
Click to expand...
Click to collapse
The first rom i flashed was with CWM. It was quite easy and i rooted it more than half a year ago that was not that hard to. This is the third rom i flashed and now it all gets wrong.
I already had my connection between phone and computer but it doesn't respond any further.
At this moment i dont even get him in download/recovery mode anymore. Everytime i try it shows a second of a empty charging battery and it shuts down.
Manvendra05 said:
Try to flash a rom straight forward.....if it works...it works...nd if it dont...it dont
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
At that point i ain't arrived yet, unfortunately.
Here a guide (with picture) to flash stock firmware with odin, but the process is similar for custom rom.
Hope this help
Now i finally got in download mode again.
I tried to flash the Siyah kernel 3.3.2 via Odin.
In the attachment you see the result which went really well i thought?
But now i rebooted my phone and i only come to the begn screen with Samsung Galaxy SII GT-i9100 and the usual Yellow triangle. At that point it shut down again.
ht tp://oi46.tinypic.com/2q1ibec.jpg
Your in a boot loop now. Follow this guide: http://forum.xda-developers.com/showthread.php?t=1108499
Read this as well to better understand Odin and flashing: http://forum.xda-developers.com/showthread.php?t=1075278
When you are in download mode, nothing happens until you connect it to your computer and flash a ROM via Odin (which you will be doing). Next time, read more.
Sent from my GT-I9100 using xda app-developers app
Thanks all for helping me, my phone works again by flashing it back to stock rom.
I dont have any root privileges and the yellow triangle is gone now. I already miss things as changing battery icon and ability to use camera when batterylevel is below 15%.
But for now on i will take a little easy with flashing.
Mate, here is a hint for you. You should really thank people who help you and not just say “thanks." It helps the people who contribute feel like their input was actually appreciated in your problem solving. And not just for one person, but everyone who helps. Just a hint.
Sent from my GT-I9100 using Tapatalk 2
Hi mates!
Few months back I unlocked my bootloader and recently used many custom ROMs and kernels. Unfortunately I could not use my wifi properly - I was on FreeXperia kernel and at very start wifi worked ok, but it stopped finding any networks after couple days of rom usage. Problem was reported on the Android Development sections in the ROM thread by many users, so I thought it will be fixed soon. Couple days ago I switched to DoomKernelv3, his wifi modules and Oodies MIUI ROM - worked perfectly but my wifi worked occasionally and stopped working again. I got back to stock now and I'm on Z's Recovery (very first one I used and had no wifi problems) and problem with no wifi networks still persists. Did I brick my wifi somehow? Is it possible? Does anybody experienced similar problem?
Any help would be GREATLY appreciated.
hey
honestly... i think there is a hardware problem in your phone....
cuz even after switching rom's you still have the same problem....
i would sugggest that your use seus and get back to stock version... and just get it fixed by them.....just keep saying them that wifi doesnt works and all.....
rohit25 said:
honestly... i think there is a hardware problem in your phone....
cuz even after switching rom's you still have the same problem....
i would sugggest that your use seus and get back to stock version... and just get it fixed by them.....just keep saying them that wifi doesnt works and all.....
Click to expand...
Click to collapse
Seus says my phone is up to date. Besides, I assume I need to unoot it and lock the bootloader back to use varanty?
Sent from my X10i using xda app-developers app
easy pesy
botson said:
Seus says my phone is up to date. Besides, I assume I need to unoot it and lock the bootloader back to use varanty?
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
very easy mate....
just open seus.... support->update phone->repair phone written in red color->wait and then from the list of phone choose your's->now take the battery out for 5 seconds(15sec might also work)->put the battery in->press back button and keep pressing it and then connect the usb cable....->it would flash the stock rom back plus automatically lock the bootloader again....
VOILA....
claim your phone is having hardware problems to the repair guys..... if under warranty
rohit25 said:
very easy mate....
just open seus.... support->update phone->repair phone written in red color->wait and then from the list of phone choose your's->now take the battery out for 5 seconds(15sec might also work)->put the battery in->press back button and keep pressing it and then connect the usb cable....->it would flash the stock rom back plus automatically lock the bootloader again....
VOILA....
claim your phone is having hardware problems to the repair guys..... if under warranty
Click to expand...
Click to collapse
I don't think seus locks your bootloader you have to use s1 tool I'm pretty sure I may be wrong though
sent from my x10 using xda premium
it does lock.... coz every-time i got f'd while flashing i used seus and had to unlock the boot-loader every-time.... even though i checked with s1 tool first if the boot-loader was locked or not....
any way if you r on stock rom... those repair guys... wont even notice that you flashed the device
Hi!
I have had the same problem as you. Still after repairing it in PC Companion, the problem was still there.
So I left the phone for couple of days because I got Xperia S, and when I turned it on one day and searched for WiFi networks, it finally found some networks!!!
I don't know what 'fixed' it, but I think it's a hardware issue and I was going to get it repaired until it fixed itself
Sent from my LT26i using xda premium
I repaired the system with SEUS, no Recovery or root available anymore. I assume bootloader is locked back. Wifi works same way as it worked. Is there some wifi debug software to figure out what is going on?
Anyone?
botson said:
I repaired the system with SEUS, no Recovery or root available anymore. I assume bootloader is locked back. Wifi works same way as it worked. Is there some wifi debug software to figure out what is going on?
Anyone?
Click to expand...
Click to collapse
yes, me use rom manager. browse all options. u should see one called wifi scan interval. if i am not wrong, default is 480. change to the lowest possible
Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
NetworkLabs said:
Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
Click to expand...
Click to collapse
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
stephenhiscock98 said:
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
Click to expand...
Click to collapse
No, because I charged it all night and tried to turn it on with no success. So that isn't the problem...
Flash 2.3 firmware then do root,recovery(just in case you don't have it) and a kernel.
Sent from my Desire HD using xda premium
Here is the firmware, thank the logic please.http://forum.xda-developers.com/showthread.php?t=1749426
Sent from my Desire HD using xda premium
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
NetworkLabs said:
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
Click to expand...
Click to collapse
No it wont if you flash stock 2.3 it will wotk!
sent from my x10 using xda premium
I had quite the similar issue with my x10i. One day it just decided to stop working completely. No lights no nothing, tried everything, just dead. So I contacted SE and they said they could do nothing if the software had been tampered with, no matter how much I assured them if was a hardware related fault.. So I went to my carrier and they sent me to a phone repairing company (Fonemenders here in Ireland), who try fix the phone themselves by getting parts in from the manufacturers. If they deem your phone irreparable they will get you a new replacement. This is exactly what happened me. So the other day I received an email saying that seeing as my x10 couldn't be fixed, I'd be receiving a Sony Arc as a replacement! So i'm happily waiting for the Arc to get here while I use my moms old x8.
So my best advice if nothing is working, go to your carrier and hopefully they can get you through to a phone repairing place, and I wish you as good luck as my own
Well, I cannot replace the Phone since I am not really using it as a Phone. It will not be activated, it's just to mess around with. And I really don't want to buy a Samsung Galaxy Player just so I don't have to deal with this. So I'm going to try the Stock ROM now and see if it works. Do I have to wait for boot up or something?
Try to flash with SE Companion. It will work.
Well, I restored using SEUS because it's the only one that recognized the phone, other than FlashTool. After it restored, it said Unplug the phone and wait for first time. It will take a while. So I am currently doing that. Hope it turns on!
Well, I've restored it and it still sits here. What's next?
I am going to try to flash it using s1tool and see if that helps. Also, can someone please respond with what they think is wrong?
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
NetworkLabs said:
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
Click to expand...
Click to collapse
Nooo to flash a stock firmware you don't need unlocked bootloader
sent from my x10 using xda premium
Well, it won't let it. It either doesn't recognize the device or it returns a error... =/
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Any additional help?
NetworkLabs said:
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Click to expand...
Click to collapse
I have a question for you... is the phone rooted ? If not then try following
1) start your PC companion and select update software
2) if software say, your phone is up to date then use here will be repair option you need to select it.
3) once you select repair it will download stock GB 2.3.3 and after download it will ask you to plug you phone in flash mode
4) remove phones battery and connect the phone to your laptop.
5) now place the battery back while holding down the back button (3rd button from left) { this step is important as this will get your phone into flash mode.
6) above steps should get your phone back onto stock unrooted ROM...
if you want then use flash tool to root it again but be careful with kernels and bootloader
Set from my Transforer TF101 using xda app-developers app
Well, I think I have tried that and it still won't boot. But I will try again. (PS - Sorry for this old thread, but I just needed a break on working on it! I am going to try again and see if it works!)