it goes after the xperia p animation it restarts by itself. I can access CWM
Which ROM are you using?
OK FIXED. Holding the power button and volume up for long time turned off the phone and I flashed another kernel
Glad you got it sorted.
When I hold down the Volume Down button and connect my Xperia P to flashtool, the notification LED goes green but the window with the old Xperia device doesn't go away and after a while the green LED turns red and the screen shows the charging animation.
I can enter CWM while the device powers up but I can't mount USB storage. My bootloader is locked and I tried to install the .54 small app tweak on my .544 (I didn't think it'd be an issue, but I was wrong! I'm a n00b. Nu H8 Pl0x )
I've also tried using the Sony Update Service but it can't detect my firmware because it can't detect my phone in Flash mode
Someone please help me. I've searched everywhere but couldn't find a solution.
Munty_McCoy said:
When I hold down the Volume Down button and connect my Xperia P to flashtool, the notification LED goes green but the window with the old Xperia device doesn't go away and after a while the green LED turns red and the screen shows the charging animation.
I can enter CWM while the device powers up but I can't mount USB storage. My bootloader is locked and I tried to install the .54 small app tweak on my .544 (I didn't think it'd be an issue, but I was wrong! I'm a n00b. Nu H8 Pl0x )
I've also tried using the Sony Update Service but it can't detect my firmware because it can't detect my phone in Flash mode
Someone please help me. I've searched everywhere but couldn't find a solution.
Click to expand...
Click to collapse
I think SUS have option to repair phone in flashmode.. Had u tried it? In update firmware they have option to repair phone.. Click it,choose your phone model and it will download firmware and all u need to do is connect your phone in flashmode.. Also make sure u had installed driver for flashmode,adb and fastboot.. (just to make sure nothing wrong)
Munty_McCoy said:
When I hold down the Volume Down button and connect my Xperia P to flashtool, the notification LED goes green but the window with the old Xperia device doesn't go away and after a while the green LED turns red and the screen shows the charging animation.
I can enter CWM while the device powers up but I can't mount USB storage. My bootloader is locked and I tried to install the .54 small app tweak on my .544 (I didn't think it'd be an issue, but I was wrong! I'm a n00b. Nu H8 Pl0x )
I've also tried using the Sony Update Service but it can't detect my firmware because it can't detect my phone in Flash mode
Someone please help me. I've searched everywhere but couldn't find a solution.
Click to expand...
Click to collapse
This thread is old almost half a year and now this ? OK, make sure you have PC Companion, FLashtool drivers and Gordons Gate Drivers
I tried it with the latest version of Flashtool and now it's fixed!
Thanks for the help, guys :')
bootloop
Hello, I got bootloop, rooting by doomlord easy rooting, how can to get out from bootloop when you dont have file to flashing new firmware cause I using easy rooting. please someone help me, xperia P.
someone help me please:crying:
Frxz21 said:
Hello, I got bootloop, rooting by doomlord easy rooting, how can to get out from bootloop when you dont have file to flashing new firmware cause I using easy rooting. please someone help me, xperia P.
someone help me please:crying:
Click to expand...
Click to collapse
man, you have to give us a little more information, which rom do you use?, which version of Easy Rooting Toolkit used?, well you follows these steps?
Code:
Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Applications\Development)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Applications)
(4) [OPTIONAL] increase screen timeout to 10 minutes
(5) connect USB cable to PHONE and then connect to PC
Edit:
as I read, it has been tested on xperia P but with JB
Code:
Xperia P (LT22i) {FW: 6.2.A.1.100} (added by the_laser) [v14 onwards]
this guy use Easy Rooting Toolkit on xperia p with JB stock, look at the video and tell us if you did the same steps that him.
Tutorial Easy Rooting Toolkit on Xperia P Youtube
Edit 2:
Anyway, just now occurs to me that you can download and use PC Companion to reinstall JB stock
Related
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
Hi to all! I've a very big problem! My x10 show me only Sony Ericsson.
Idid try to flash but nothing...pc don't recognize my phone...i tried with sues, pcc and flashtool...what can i try to solve it? please help me!!!!
ps: if i plug-in x10 without battery to pc, it show me the green led...and after hold back and put battery, it show me green led for 5-10 seconds and after the green led turn off and show me sony ericsson
What did you do to your X10 that made it do this? What did you try flashing via Flashtool that didn't work?
i was on miui e all gone well....after i tried to install the black edition HD...after that i had this problem...
if i try to connect in to flash mode x10 to pc, it don't work...the pc don't recognize my x10
Did you format your data after changing ROM?
Sent from my X10i using XDA App
yes i did it...
Maybe You have wrong kernel?
Shindoruk said:
yes i did it...
Click to expand...
Click to collapse
i don't know...but i don't think...but the problem is another...why can't i plug-in and flash it? why didn't pc recognize my x10?
HElp Help Help!!!!
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Panzerfaust101 said:
Ok. Judging by the fact that you're stuck on the Sony Ericsson logo, I'm assuming you're on the stock kernel and also on locked bootloader. Because you tried to install BlackHD Edition as well, I'm assuming you also have CWM.
The simplest method is if you made a backup in recovery and can access recovery. If you did this, you can simply restore the backup to get the ROM and data you were using before back. If this does not work properly (sometimes backups are screwed up somehow in recoveries), read on for the flashing method.
The X10 showed a green LED when you plugged it in which suggests that it can access flash mode (which is what I'd expect if you didn't tamper with the X10 so much as to break even that). If you have FlashTool, the following series of instructions should work:
1. Download the Xperia X10 stock firmware and move them to the firmware folder of the X10 FlashTool (the firmware can be found in this thread as well as the latest FlashTool: http://forum.xda-developers.com/showthread.php?t=920746)
2. Open FlashTool and press the flash button at the top left of the program
3. Select the stock firmware from the list and press ok
4. Instructions telling you to turn off and unplug your phone and plug it in with flash mode should pop up (hold back while plugging the cable in). Follow them and wait.
If you did this properly, you should have flashed the stock Sony Ericsson firmware with everything as it was when you bought the phone (if you flashed the 1.6 firmware) or updated the X10 to 2.3.3 (if you flashed the 2.3.3 firmware). That should be the most fail-proof and reliable way (I've saved my X10 from my stupid experiments through this several times already)
Just a little side note: If my assumptions are correct, you tried to flash the BlackHD Edition MIUI-based ROM through CWM on a locked bootloader and stock Sony Ericsson kernel probably without flashing the lockedbl.zip that's provided in the BlackHD Edition thread. Most FXP custom kernels work with that ROM without a problem, but the stock one just doesn't because it's far too different. You could have either chosen the locked or unlocked installation method on the thread (I know because I've done it before). The unlocked one requires an unlocked bootloader and a FXP custom kernel, neither of which I think you have. The locked method only requires CWM installation and for you to flash the lockedbl.zip after installation. I think your issue must have come from the fact that you forgot that last part, or some other strange error occured.
Click to expand...
Click to collapse
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
As in, it doesn't recognise the device?
I think there's another way where you take the battery out and plug the phone into the computer. The green LED should light up for about 5-10 seconds (when it's in flash mode) where you have a window to select the firmware and flash. I haven't personally tried it, but I'm asking someone who has done it about how it's done. You might want to try that method as you can't really do much else with your phone right now. I'll update this post once I know the exact method and details
panzerfaust101 said:
i'll update this post once i know the exact method and details
Click to expand...
Click to collapse
thanks a lot
anything news? please i need help!!!!!!
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
pissat4motion said:
Once flashtool asks you to connect USB cable..connect the phone with the battery removed. THEN replace the battery while holding the power button and it should start up into flashmode.
It may even work without holding the power button...
Its strange because when stuck at SE logo you can't follow the on screen directions to get it to work
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
it doesn't work
try this man, http://forum.xda-developers.com/showthread.php?t=1504809
hope it helps
Help
Shindoruk said:
yours assumptions are correct.
About instructions to how to connect to flashtool, i know they. i click on flash button, select firmware and when pop up to plug-in, i do it...but don't work...don't connect...
Click to expand...
Click to collapse
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
epep420 said:
Sir I'am a newbie, And I've got that same problem, my next problem what flashtool should i use? sorry for being a noob, just curious, thanks a lot for your reply
Click to expand...
Click to collapse
If your bootloader is locked, you can choose the option to repair phone in pc comp. Another possibility why your phone is not detected might be because of drivers.
It may also because of his usb not working , the problem might have started . I want to check out whether your phone is charging and i also want to know that in devicemanager your phone when connected in flash mode shows as "semc usb device "
Thanks
Can U Access XRecovery Menu ?
Can U Access XRecovery Menu ?
- Connect Usb Cable -
- Mount System (in XRecovery) -
- Open Sony Pc Companion -
- Select Repair -
- it says connect your mobile in flash mode -
- u dont remove the cable -
- unmobut System (In XRecovery)
- remove usb cable -
connect in flash mode - IT REPAIRS YOUR MOBILE .
Try This Once..Worked For Me
hi everyone
i have a problem as i said at the title
i reset my phone with the pc companion than i flash the wrong rom which is device x10 and version v1
so it didnt work . Sola got stuck in bootlop
flashtool doesnt work. i tried to repair with pc companion as you guess it didnt work
fashtool said device disconnected, be sure about to mtp mode and start with the debugging off
ı hope somebody help me
...
Turn off ur device, remove battery or press power+volume up 5 sec
Download right ftf using XperiaFirm or whatever u want
Then flash, it's simple like 1+1
hello u all
while making a reparing of the software of a Sony Xperia zx1 G8341 with the Sony Xepria Companion my internet connection falls down. actually my phone dont work, or any bottom and i cannont reboot the system by any way. i tried to intall minimal adb and Sony Emma Flashtool to reboot the system to fabricant settings with my PC (windows 10) but the phone is totally dead. the port usb read a connection but it makes errors in every read. i dont care about the information, i just want ty to recovery the device. thaks u all for reading and any help possible
bhaco said:
hello u all
while making a reparing of the software of a Sony Xperia zx1 G8341 with the Sony Xepria Companion my internet connection falls down. actually my phone dont work, or any bottom and i cannont reboot the system by any way. i tried to intall minimal adb and Sony Emma Flashtool to reboot the system to fabricant settings with my PC (windows 10) but the phone is totally dead. the port usb read a connection but it makes errors in every read. i dont care about the information, i just want ty to recovery the device. thaks u all for reading and any help possible
Click to expand...
Click to collapse
Are you able to enter the flash mode ?
Sent from my G8342 using Tapatalk
bhaco said:
hello u all
while making a reparing of the software of a Sony Xperia zx1 G8341 with the Sony Xepria Companion my internet connection falls down. actually my phone dont work, or any bottom and i cannont reboot the system by any way. i tried to intall minimal adb and Sony Emma Flashtool to reboot the system to fabricant settings with my PC (windows 10) but the phone is totally dead. the port usb read a connection but it makes errors in every read. i dont care about the information, i just want ty to recovery the device. thaks u all for reading and any help possible
Click to expand...
Click to collapse
emm....
try rebooting by pressing volume Up and power together until the phone vibrates.plug the smartphone into a USB connected PC and press the volume up if the LED lights blue try entering the "fastboot devices" command if it is detected unplug and connect again while press the volume down if the LED lights green do flashing
I pray that your device can be used again
hany ahmed79 said:
Are you able to enter the flash mode ?
Sent from my G8342 using Tapatalk
Click to expand...
Click to collapse
no i can't, i think the bottoms are dead for some reason because I try to enter the flashmood and it don't work at all. after some days i connected the phone to a electric charger and the screems shows the Sony logo and the status of battery but i can't turn on the phone o acces the flsh mode to reboot the system. it's any chance that the bottoms don't work for a software problem?? or it s easy to repair the bottoms ? thaks u all for you answers
Can you do a screen of device manager in W10? I want to know if there is any device with strange name. Do you have a unlocked BL or it is still locked?
hany ahmed79 said:
Are you able to enter the flash mode ?
Sent from my G8342 using Tapatalk
Click to expand...
Click to collapse
I've also the same problem on my xperia xz1. I accidentally disabled Develover mode and soon my phone become dead. No response while i press power button or any other key combination (also can't enter fastboot/ flash mode). But while I connect to PC with xperia flashtool, the Xperia Logo appear and then a repair sign and then show charging battery. Flashtool show phone is connected with USB debugging disabled.
Please answer me if my phone is recoverable or not and what should i do.
Thanks
Winux_Aung said:
I've also the same problem on my xperia xz1. I accidentally disabled Develover mode and soon my phone become dead. No response while i press power button or any other key combination (also can't enter fastboot/ flash mode). But while I connect to PC with xperia flashtool, the Xperia Logo appear and then a repair sign and then show charging battery. Flashtool show phone is connected with USB debugging disabled.
Please answer me if my phone is recoverable or not and what should i do.
Thanks
Click to expand...
Click to collapse
Do you have unlocked BL? Have you tried to fix it using pc companion or not?
EDIT There is something called Newflasher. I have used it few times but I don't know if it works with locked bootloader and disabled developer mode because I have a TA backup and unlocked BL. You have to ask on this thread https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 and try to do it by yourself. It may get work.
dawidcx3 said:
Do you have unlocked BL? Have you tried to fix it using pc companion or not?
EDIT There is something called Newflasher. I have used it few times but I don't know if it works with locked bootloader and disabled developer mode because I have a TA backup and unlocked BL. You have to ask on this thread https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426 and try to do it by yourself. It may get work.
Click to expand...
Click to collapse
Appreciate your suggestion. I tried PC companion but it can't detect my phone. I've never tried to unlocked BL.
I'll tried with Newflasher as you said.
EDIT: The newflasher can't help. I think the main problem for my phone is that all buttons are not functioning. May be I accidentally did something in developer mode of my phone before it got crashed. (when i connect to charger, screen shows Xperia logo , then a triangular repair sign and finally a green charging battery).
Winux_Aung said:
Appreciate your suggestion. I tried PC companion but it can't detect my phone. I've never tried to unlocked BL.
I'll tried with Newflasher as you said.
EDIT: The newflasher can't help. I think the main problem for my phone is that all buttons are not functioning. May be I accidentally did something in developer mode of my phone before it got crashed. (when i connect to charger, screen shows Xperia logo , then a triangular repair sign and finally a green charging battery).
Click to expand...
Click to collapse
It is hard to diagnose through the internet but we can try to eliminate next causes. So, you can't flash due to turned off USB Debugging or because you cannot enter flash mode? It is important because if you have hardware issue with buttons fixing it may be a solution. I have disassembled my XZ1 and I know that buttons replacement is quite easy for people with some experience and they cost about 5-10$ or 4.5-9.5 euro depending on region. Have you tried safe mode? The most important is that your phone is not dead at all, so there still is a hope.