Hi guys! Since I'm always seeing a post about Amarullz and other A2SD scripts having problems like random force closes, bootloops, slow read/write and not working on Stock and CM9/10 Roms. I'm going to share with you an awesome alternative to those A2SD scripts like Link2SD, Amarullz, S2E, and DarkTremor's A2SD. I'm just sharing this so if you don't wanna use it leave it. I'm just giving you guys alternatives. Try to read the Notes first before posting violent reactions.
Original Thread by croniccorey
All Credits goes to him.
Notes
*Please try to read the whole thread to avoid problems especially the Prerequisites.
*Please do a nandroid backup first if you're not coming from a fresh install of ROM so that we can avoid problems.
*I am advicing you to flash this after a fresh install of ROM.
*Please check your ROM's zip if it has a2sd scripts and remove it before flashing the ROM.
*If you have any other installation methods kindly post it here.
*The INT2EXT+ is the most advicable out of those scripts as it is the one used by the creator.
*Moving /data/data to /sd-ext might slow down the performance of the phone.
*If you choose a d2ext/int2ext script then remove the "06mountdl" or "06BindCache" in init.d folder if they exist as the script will do this from now on.
(Taken from the thread)
About:
CronMod INT2EXT was wrote for use in my rom with the goal to achive a stable and fast way of moving the data partition of your phone to the sd-ext partition, they are available for all users and developers to use in any rooted rom with init.d support.
CronMod INT2EXT scripts are the first universal INT2EXT method released
Developer Stuff Next Post
Features:
(All scripts are tested on Android 2.3.7 - 4.2.2)
INT2EXT
-Mounts /sd-ext to /data
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
INT2EXT+
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
INT2EXT4
-Mounts /sd-ext to /data
-Works with EXT 4 filesystem
-ZipAligns /data/app on every boot
-No symlinks
INT2EXT4+
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 4 filesystem
-ZipAligns /data/app on every boot
-No symlinks
INT2EXTV2+
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
-Supports SWAP2INT
-Completely universal (Testing is needed)
Prerequisites:
-Rooted Rom with init.d support
-SD-EXT partition
-100mb internal is needed for every 500mb sd-ext
SD Card Partitioning:
Partition 1 - Fat32
Partition 2 - Ext 2/3/4
Install:
(Instructions based on ClockWorkMod recovery)
-Download Chosen Script Below
-Place on root of your sdcard
-Reboot Recovery
-Select "install zip from sdcard"
-Select "choose zip from sdcard"
-Select "CronMod-****_signed"
-Select "mounts and storage" category
-Select "format /sd-ext"
-Reboot
(if you already use a A2SD/D2EXT/INT2EXT/M2SD script then you will need to remove it completely)
Downloads
Kindly go to the Original Thread for the download links.
Thanks for sharing my scripts man, i like the way you did the download links
Hi, I'm using INT2EXT4+. Works great and speed is awesome, but there's only on problem: if I wipe dalvik cache the device doesn't boot.
Looking at the logcat I noticed that it doesn't find davik anymore, there's a bunch of NOT FOUND errors. Is this normal? If not, is it possible to fix it?
Thanks in advance!
Sent from my Ace on Apocalypse Rom
Jar3112 said:
Hi, I'm using INT2EXT4+. Works great and speed is awesome, but there's only on problem: if I wipe dalvik cache the device doesn't boot.
Looking at the logcat I noticed that it doesn't find davik anymore, there's a bunch of NOT FOUND errors. Is this normal? If not, is it possible to fix it?
Thanks in advance!
Sent from my Ace on Apocalypse Rom
Click to expand...
Click to collapse
Dunno about it bro. Ask it in the original thread. Maybe croniccorey will help you
Will try!
Sent from my Ace on Apocalypse Rom
For anyone who had the dalvik cache problem here it is the solution, directly from the OP.
http://d-h.st/LX4
Flash it to wipe the dalvik cache!
Sent from my Ace on Apocalypse Rom
Jar3112 said:
For anyone who had the dalvik cache problem here it is the solution, directly from the OP.
http://d-h.st/LX4
Flash it to wipe the dalvik cache!
Sent from my Ace on Apocalypse Rom
Click to expand...
Click to collapse
Thanks bro!
Nice ..... this is what I need, thanks bro :good:
Hi to all!
Sorry for my bad english...
Do these scripts work on a stock Rom, like GINGERBREAD 2.3.6 with version of kernel: 2.6.35.7 [email protected] #1?
Or should i flash the phone to another Rom?
I have been using INT2EXT+ for about a week and I am pretty happy with the results, only thing I have noticed is that whenever any app is installed or any read/write operation is performed the phone freezes momentarily and system force closes, I just hit wait, let it do its thing and it comes up good after a few minutes, I guess it's the lag of writing to the SD instead of internal memory, but is this normal? does it happen to you guys using the script?
morrisx said:
Hi to all!
Sorry for my bad english...
Do these scripts work on a stock Rom, like GINGERBREAD 2.3.6 with version of kernel: 2.6.35.7 [email protected] #1?
Or should i flash the phone to another Rom?
Click to expand...
Click to collapse
Yes it will work in stock ROMs but you need to have a kernel that supports init.d. You don't need to flash another ROM, you just need to flash a kernel for stock like Battery Extender or CF-root.
Kasnar said:
I have been using INT2EXT+ for about a week and I am pretty happy with the results, only thing I have noticed is that whenever any app is installed or any read/write operation is performed the phone freezes momentarily and system force closes, I just hit wait, let it do its thing and it comes up good after a few minutes, I guess it's the lag of writing to the SD instead of internal memory, but is this normal? does it happen to you guys using the script?
Click to expand...
Click to collapse
Maybe it's because of a lower class SD-card. Never faced that problem
What is the easiest way to check if the script is running OK on my device? I think the script isn't running cause after restore on TB I am going from 120 MB to 45 allready after clean install.
---------- Post added at 09:16 AM ---------- Previous post was at 09:08 AM ----------
I checked the init.d folder and it is empty, I am using the stocklite 7.1 rom from this thread.
forum.xda-developers.com/showthread.php?t=1703094
EDIT I am trying the Int2Ext+ script
---------- Post added at 10:10 AM ---------- Previous post was at 09:16 AM ----------
You should mount system and data before flashing the zip file. Thanks through this post.
http://forum.xda-developers.com/showpost.php?p=30277069&postcount=207
Oops, wrong thread, sorry
will this work on my S5830i?
need a reply. ASAP. thanks!
ijustzeke said:
will this work on my S5830i?
need a reply. ASAP. thanks!
Click to expand...
Click to collapse
As long as the rom has unit.d support it should work
Sent from my Ace on Apocalypse Rom
Does it works on ROM based JB?
Im on paranoid ROM n need some suggestion..
Thanks for sharing scripts using smooth
Thank you:thumbup:
what script will suit for my galaxy ace s5830 runing a custom rom called sgs2 v10? i've tried amarullz mod script to have lot internal memory on my phone, but no luck.... even though i have 1gig partitioning on my sd card..
I have problem with wi-fi after install INT2EXT4+. I have MIUI GB mod.
Someone knows how to fix it?
Related
Following from this thread, I finally partitioned my sd card and had link2sd installed in my ace.
http://forum.xda-developers.com/showthread.php?t=919326
I moved my apps using apps2sd. I found out there are some remaining data in the phone. Are those data : dalvik-cache (.dex) file and lib files (.so) ? Or those are the game saves data. So, if i use Link2SD, i can completely move those data to sd?
It shows an error when I try to start it.. I could not link any of the apps.
Mount Script Error
Mount script cannot be created.
mount: mounting /dev/block/vold/179:2 on data/sdext2 failed: Device or resource busy
Click to expand...
Click to collapse
my 2nd partition is on fat32
did u create both partition as primary?
btw i still think link2sd is buggy and annoying. at least in my experience. sometimes it fails to mount partition during booting and just prompt to reboot, or the moved app wouldnt even show in app drawer.
A2SD works perfectly for me.. There aren't many functions as Link2SD but it does the job..
an0nym0us_ said:
did u create both partition as primary?
btw i still think link2sd is buggy and annoying. at least in my experience. sometimes it fails to mount partition during booting and just prompt to reboot, or the moved app wouldnt even show in app drawer.
Click to expand...
Click to collapse
Yes, both are primary as guided from the thread. :S
So any other than link2sd that can fully move an apps including it's data etc. My internal memory getting full soon.
Pahan88, is App2SD free same thing as A2SD?
here if we said a2sd or app2sd it generally means dartremore a2sd. u need to be rooted, and if ur on gingerbread u need to use kernel which support init.d script which is ketut's cfroot kernel. darktremore a2sd can move apps, data and dalvik cache to sdcard
edited: sorry, just realize ur thread title said cm7 kang. ur already rooted and using cfroot. u just need to flash darktremore a2sd via recovery
Thanks.. Do you mind showing me the right thread? I did a search and there are so many threads about it.. I dont even know which one is the right one.
partition ur sdcard with two partition, both primary. 1st partition as fat32 and 2nd partition as ext2/ext3/ext4
get the flashable zip file from its thread here
put it in sdcard, boot into cwm and choose to mount system and mount data.
choose to install zip from sdcard and flash the earlier zip file.
get terminal emulator from market, open it and do
Code:
su
a2sd reinstall
and ur phone will reboot.
when it boot up, open terminal again and do
Code:
su
a2sd cachesdreset
to move dalvik cache to sdcard, or
Code:
su
a2sd datasd
to move data to sdcard
Hi, I got a new sd card 4gb. But I partitioned using CWM. I checked through MiniTool Partition Wizard, it didnt show any 2nd partition but it did shows reduced MB. Partition via CWM is ok?
And no-one points the poor guy to s2e
Hi there. I saw the information there. Sounds so simple.. Is there anything I should know before I try it? And im not a guy btw.. THanks ^^
WishFinder` said:
Hi there. I saw the information there. Sounds so simple.. Is there anything I should know before I try it? And im not a guy btw.. THanks ^^
Click to expand...
Click to collapse
Sorry, but Yea its that simple But if your a frequent backup/restorer kind of person, using advanced mode may get very confusing and you will get force closes as it brings anything you moved to SD-EXT. Don't worry about the Cache size and ext4 journaling in the settings.
to use link2sd with CM7 KANG rom .just mount the second partition as ext3 format.link2sd will work.
scoffyburito said:
Sorry, but Yea its that simple But if your a frequent backup/restorer kind of person, using advanced mode may get very confusing and you will get force closes as it brings anything you moved to SD-EXT. Don't worry about the Cache size and ext4 journaling in the settings.
Click to expand...
Click to collapse
mm when i run the s2e, I cant click on anything except the "Download cache" part. The others, I cant tap on it. Cant move my apps..
hey,, I just flashed oxygen ROM (latest stable 14NOV) on my O1... I want to know that can i use link2sd with it ?? If yes then which type of second partition should I use, Fat32 or Ext3 ??
umangleekha said:
hey,, I just flashed oxygen ROM (latest stable 14NOV) on my O1... I want to know that can i use link2sd with it ?? If yes then which type of second partition should I use, Fat32 or Ext3 ??
Click to expand...
Click to collapse
Well, reboot in recovery -> advanced -> partition (NOTE: EVERYTHING WILL BE ERASED!!! BACKUP IF NEEDED)
Then boot again, go to Link2SD, select ext4 and reboot.
If you can't link then, try menu -> recreate mount script -> ext3
Press thanks!
I know with a2sdgui, it asks for an a2sd script before it's working, I've never used link2sd before, to OP I followed what the guy above me said than downloaded darktremors a2sd zip script than flashed it than used a2sdgui to move apps to sd-ext, zipaligned and moved and rebuilt dalvik cache and it's been working flawlessly for me, but to respect what above user mentioned, whatever works best for you... There's ungaze and darktremor a2sd script on these forums, do the search on goggles for em
Sent from my LG-P500 using xda premium
I dun prefer using as2d scripts as they also move gapps to sd,, link2sd worked best for me on stock ROM..
First of all, I apologize in advance. I searched through everything and can't find my question. I'm a complete smartphone noob (got my first one a couple days ago--Canada's wireless providers are criminally expensive and I boycotted them as long as I could) and, while I'm reasonably good at technical things overall, I'm totally inexperienced here, with smartphones in general, Android, and it's parent OS Linux.
That out of the way: I have a Samsung Galaxy Ace, with Gingerbread 2.3.4 on it, through the provider Koodo. I am loving this phone, but I'm not entirely sure why certain things didn't work. There were apps I couldn't download due to a lack of space (despite a mostly empty 16GB microSD card), and apps that wouldn't install for other reasons. And always that frighteningly small 158MB system drive staring me in the face. So I decided to try to fix it.
I carefully read every bunch of instructions I could find and understand. Successfully rooted the phone. Installed ClockworkMod Recovery. I repartitioned the SD card with a big ext partition and swap space using CWM. I installed CF-Root-S5830_dtapps2sd-v1.2.zip successfully, and App2SD from the market.
This hasn't helped my free space at all. Nothing seems to be using that new ext partition. My available space did not go up at all...but (of course) my SD card space went down by the size of the new partitions.
I was under the impression there were kernels that could help your phone treat the SD card ext partitions like system space, but I can't figure out where or how for the life of me. Everything has worked, but it hasn't actually done anything.
-NoobGrrl
ur cf-root is not the latest, and I think if u make sd card partition by using cwm, the format will be ext3 not ext4.. so, u should try this step :
1. flash the latest cf-root v37-b82 through cwm from this post http://forum.xda-developers.com/showthread.php?t=1158197
2. partition ur sd card by using minitool partition wizard (google it) and make ext4 format.
3. flash the latest darktremor through cwm (don' forget to mount system n sd card) from this post http://forum.xda-developers.com/showthread.php?t=715116
4. install a2sd gui from market... done..
You probably forgot to move the dalvik cache to sd-ext from A2SDGUI.
To begin with, as you haven't done this before, I recommend you download the app link2sd rather than app2sdgui. Your system will be ext3 from CWM. Select and reboot. Then return to link2sd and you can move apps one by one or by batch installation to your partition by creating a "link". This method gives you finer control over which apps to move. It shows file sizes and how much of the app will be moved. After moving the apps reboot and hey presto - free internal memory.
I also recommend getting an app called DiskUsage to see what is taking up space and a file browser with root functions. I use Root Browser by jrummy16 - free on market.
Sent from a phone with an app.
First of all, thanks for the replies! I like the detailed instructions from musf especially...step-by-step for me is really the best way.
Okay, tried to follow those directions exactly. Minitool Partition Wizard has reformated the little 2GB partition I made on the SD card to ext4. Most recent CF-Root and dtapp2sd zips seemed to install fine. I think I mounted all the drives...I just do it from CWM, yes?
Downloaded A3SDGUI and it gives me an error:
Exiting A3SDGUI
Could not start for one of these reasons:
1. Your device is not rooted (it is, superuser shows access granted to A3SDGUI)
2. A3SD scripts could not be found (if so, no idea why.)
3. No EXT partition found (again, no idea why.)
Edit: Tried Link2SD and it gave an error as well, "Mount script could not be created. No such device."
Okay, so obviously it doesn't see my SD card's partition. So I put it back in my PC and recreated it again. No change at all...
yes from cwm, choose the "mount n storage" menu, then moutn system, then mount sdcard, then instal the darktremor zip file..
That seems to have almost worked...yes, I was mounting the drives after running DT. Duh. (I assumed somehow that DTapp2sd allowed me to set up the drives and I was telling the phone to mount it afterward so it could be used. I didn't realize DTapp2sd just needed to write to the drive.)
Almost. Almost worked.
Now, app2sd actually starts up successfully, no errors. (link2sd still gives the same error.) However, App2SD can't actually move anything. All items remain disabled, even after selecting them.
So then I remember the post above about the dalvik cache. So I go into App2SD and try to move it to the sd-ext folder, and it tells me there is not enough space. I have 124 MB of system memory left right now...and the SD card is mostly empty.
Follow the following instructions and tell me if they work:
(redo the steps even if you have done them already)
1. download cwm5 from the forum and place it into your sd card.
2. make a backup of your sd card and reboot your phone into recovery.
3. flash cwm5 file and reboot the recovery.
4. from the recovery, re-partition your card with a ext partition (you dont need more than 256-512mb. I have 16gb card and mine is only 256mb).
5. select swap if you want it.
6. ~partitioning complete~
7. Connect your phone to your computer with usb wire (while in recovery.)
8. mount usb storage from recovery.
9. copy the cfroot file to your memory card from pc.
10. unmount the usb storage.
11. mount system,sdcard, sd-ext (just to be on safe side) and flash with cfroot.
12. reboot.
13. open a2sdgui.
14. click yes, apps are on sd!, zipalign on boot is on!.
15. set swap if you want it.
16. from dalvik, click on dalvik cache on sd-ext and click move and rebuild.
17. your phone should reboot and you will be done
Notes: Its normal that after flashing a2sd script, your phone restarts a coupe of times so just leave it alone for a moment.
Don't forget to give superuser permission to a2sdgui.
If you still get some error, sty flashing the script again.
If it still doesn't get through, search for the dt a2sd beta 4 script and flash that from recovery. Other steps are the same!
Happy FLASHING
I'm using Clockworkmodace. That's 4, not 5, right?
I can't find a zip for CWM5 that is designated for the galaxy ace...
Here is CWM 5 : http://forum.xda-developers.com/showthread.php?t=1291327
Then , i would recommend you to use cyanogenmod 7.2 RC1 , it is better than a stock ROM
2 mistakes from redlag's instruction (cmiiw) :
first, cwm 5 is for cm7 based rom, dunno what'll happen if used on stock gb.. n second, point 4 can't be used, it'll make ext3 not ext4..
uninstall the link2sd then reflash the dta2sd (mount!) or uninstal the dt then reflash link2sd.. can't use both, they're like fire n water, lol.. u must choose..
musf said:
2 mistakes from redlag's instruction (cmiiw) :
first, cwm 5 is for cm7 based rom, dunno what'll happen if used on stock gb.. n second, point 4 can't be used, it'll make ext3 not ext4..
uninstall the link2sd then reflash the dta2sd (mount!) or uninstal the dt then reflash link2sd.. can't use both, they're like fire n water, lol.. u must choose..
Click to expand...
Click to collapse
I think cwm5 should work and i made it using point 4 and it works perfectly.
p.s. sd-ext are normally ext2, not ext3 or ext4. ext4 is normally used in internal.
EDIT: No it dsn't. Use cwm4. I guess that one has partitioning option too right? O easy way out, flash to ics1.2
aymi60 said:
Here is CWM 5 : http://forum.xda-developers.com/showthread.php?t=1291327
Click to expand...
Click to collapse
Edit: Ah, missed clarifications of my worried on the second page.
Then , i would recommend you to use cyanogenmod 7.2 RC1 , it is better than a stock ROM
Click to expand...
Click to collapse
What is cyanogenmod?
musf said:
2 mistakes from redlag's instruction (cmiiw) :
first, cwm 5 is for cm7 based rom, dunno what'll happen if used on stock gb.. n second, point 4 can't be used, it'll make ext3 not ext4..
uninstall the link2sd then reflash the dta2sd (mount!) or uninstal the dt then reflash link2sd.. can't use both, they're like fire n water, lol.. u must choose..
Click to expand...
Click to collapse
No go...no change at all.
IrishRed said:
What is cyanogenmod?
Click to expand...
Click to collapse
Go to recovery, Wipe cache/system/data. (make sure you have made a backup of your data.)
Mount the stuff and flash with http://forum.xda-developers.com/showthread.php?t=1258830
You have a new rom with dt a2sd running within
I'm going to try a different version of dtapp2sd first.
Should the ext and swap partitions be logical or primary?
I'm starting to think my EXT partition is not formatting properly in mini partition tool. Unfortunately CWM uses Ext3 and I'm told it's worse than Ext4 and Ext2 is better than both for an SD card.
Both primary. 1st one should be fat32 and second one should be ext2.
Well, good news and bad news. After some work, reformatting the partitions again, reflashing a new kernel, I finally got it working.
Trouble is, it's not stable. Apps keep crashing, the "Gallery" app only shows a black screen, and it randomly loses access to the FAT32 partition when running, and the SIM card occasionally says "Unrecognized" (forcing me to "restore to factory.")
*sighs*
Flash to the rom i linked you to.
i just wanted to ask if it is possible to re-partition /system and /data partition .. i am thinking of pulling some of /system memory and add it to /data because my system has around 60mb+ more free memory which i can't use while my /data is only less than 20mb free and its irritating to see the low memory notification ..
or is it possible to pull some of /cache memory and add it to /data ?
thanks
xlSKYFiRElx said:
i just wanted to ask if it is possible to re-partition /system and /data partition .. i am thinking of pulling some of /system memory and add it to /data because my system has around 60mb+ more free memory which i can't use while my /data is only less than 20mb free and its irritating to see the low memory notification ..
or is it possible to pull some of /cache memory and add it to /data ?
thanks
Click to expand...
Click to collapse
Try using scripts like CronMod to increase you internal memory. All you need is a rooted phone and an SD Card with ext partition. You can create an ext partition from CWM (Advanced> Partition SD card> Size (maximum 1GB)>Cache (0MB)). Make sure to backup your SD card before you create the ext partition. Here is the link to the script,
Cronmod Unofficial / Data2sdext
Hope I Helped
mahithm said:
Try using scripts like CronMod to increase you internal memory. All you need is a rooted phone and an SD Card with ext partition. You can create an ext partition from CWM (Advanced> Partition SD card> Size (maximum 1GB)>Cache (0MB)). Make sure to backup your SD card before you create the ext partition. Here is the link to the script,
Cronmod Unofficial / Data2sdext
Hope I Helped
Click to expand...
Click to collapse
i found CronMod a couple of days ago, well i tried Data2Ext .. when i installed it my phone was 80% more laggy, i don't know why .. but i kinda like it more since it shows the sd-ext partition on the app manager instead of the original device storage .. but still, i'll try cronmod
also, it says on the thread that the attached files are outdated, but the links on the post seems to be dead
also, i added facebook, facebook messenger, google play services, hangout, clean master and quickpic to the .zip of the rom so they would be pre-installed to the /system but still my device storage is only at 30~40% initial after flashing considering that the apps are installed in the /system partition
i also tried TouchWiz ROM, it's great but i haven't installed a single app yet but the /data partition seems to be 60% Loaded already ?? is there a remedy for it ? thanks
you helped me again, hit thanks :good:
by the way, will cronmod work with pre-installed apps ? i mean the system apps ?? will cronmod manage to move all of its Dalvik Cache and Data to SdExt ??
xlSKYFiRElx said:
i found CronMod a couple of days ago, well i tried Data2Ext .. when i installed it my phone was 80% more laggy, i don't know why .. but i kinda like it more since it shows the sd-ext partition on the app manager instead of the original device storage .. but still, i'll try cronmod
also, it says on the thread that the attached files are outdated, but the links on the post seems to be dead
also, i added facebook, facebook messenger, google play services, hangout, clean master and quickpic to the .zip of the rom so they would be pre-installed to the /system but still my device storage is only at 30~40% initial after flashing considering that the apps are installed in the /system partition
i also tried TouchWiz ROM, it's great but i haven't installed a single app yet but the /data partition seems to be 60% Loaded already ?? is there a remedy for it ? thanks
you helped me again, hit thanks :good:
Click to expand...
Click to collapse
This is how CronMod works. It basically loads the /data to /sd-ext so that now /sd-ext contains all the data files. Now we mount the ext partition as the new /data mount point. Then all files in /sd-ext are moved back to /data. Since certain files like gps will not work when it is in ext partition, it is then moved back to /sd-ext. Then all the contents in /data and /sd-ext in binded so that any change in any of them is reflected to original. This is initialized every time at the boot. The reason CronMod lags is because the ext partition is loaded as the mount point for /data. Since SD card read/write operations are slower than internal memory read/write operation, /data operation will be slow. This is can be solved to a greater extend if you have a Class 8 or 10 SD card. BTW which verson did you install? If you installed CronMod by croniccorey then gps will not work. Go with CronMod Unofficial by Styke. Also this doesn't affect /system partition. Using this script will not increase the /system space. It will only increase the /data memory, so that you can install more apps and games.
---------- Post added at 11:05 AM ---------- Previous post was at 11:00 AM ----------
xlSKYFiRElx said:
by the way, will cronmod work with pre-installed apps ? i mean the system apps ?? will cronmod manage to move all of its Dalvik Cache and Data to SdExt ??
Click to expand...
Click to collapse
Since this script moves the /data partition to your ext, none of the pre-installed apps are moved to ext partition. /system thereby system apps remains intact. I suggest you install apps like facebook, facebook messenger, google play services, hangout and clean master after you setup this script. Once you install an app as system app, it can never be moved to ext partition. Hope I Helped
Since this script links the /data partition to your ext, none of the pre-installed apps are moved to ext partition. /system thereby system apps remains intact. I suggest you install apps like facebook, facebook messenger, google play services, hangout and clean master after you setup this script. Once you install an app as system app, it can never be moved to ext partition. Hope I Helped
Click to expand...
Click to collapse
i see, i think you didn't understood my question, sorry for that .. i mean, will the system applications cache and dalvik cache be linked to the sd-ext ?? .. nonetheless, i'll try again
but, do you happen to have a link to the latest versions ?? the latest version links are dead on the thread so i can't find a download link
thumbs up again for you mate, you help a lot
EDIT: also, will be SDHC be sufficient to aid the lag (even for a little ?) its a Class 10 32GB RIDATA MICRO SDHC
xlSKYFiRElx said:
i see, i think you didn't understood my question, sorry for that .. i mean, will the system applications cache and dalvik cache be linked to the sd-ext ?? .. nonetheless, i'll try again
but, do you happen to have a link to the latest versions ?? the latest version links are dead on the thread so i can't find a download link
thumbs up again for you mate, you help a lot
EDIT: also, will be SDHC be sufficient to aid the lag (even for a little ?) its a Class 10 32GB RIDATA MICRO SDHC
Click to expand...
Click to collapse
LOL I explained everything in detail thinking that you will understand. Long story short, CronMod script basically moves /data to ext partition. Since all the system and user application's dalvik cache is present in /data, Yes, it will be moved to ext. Nothing in /system will be moved to ext partition. All system apps are present at /system/app, so it can't be moved. User apps that you install goes to /data/app, so those will be moved. Also download the latest version from the "Attached Files" section in the same link. It works. Before you buy a new SD Card, try this in your current SD Card. See if it lags a lot. I might have an another solution. If that too doesn't work, you can buy a new SD Card. Do post the result. Hope I Helped
mahithm said:
LOL I explained everything in detail thinking that you will understand. Long story short, CronMod script basically moves /data to ext partition. Since all the system and user application's dalvik cache is present in /data, Yes, it will be moved to ext. Nothing in /system will be moved to ext partition. All system apps are present at /system/app, so it can't be moved. User apps that you install goes to /data/app, so those will be moved. Also download the latest version from the "Attached Files" section in the same link. It works. Before you buy a new SD Card, try this in your current SD Card. See if it lags a lot. I might have an another solution. If that too doesn't work, you can buy a new SD Card. Do post the result. Hope I Helped
Click to expand...
Click to collapse
i get stuck at bootscreen with cronmod, i don't know why, with Data2Ext, with my previous experience with is is ultimate lag
xlSKYFiRElx said:
i get stuck at bootscreen with cronmod, i don't know why, with Data2Ext, with my previous experience with is is ultimate lag
Click to expand...
Click to collapse
Are you using any other data2ext scripts currently apart from CronMod? Usually installing CronMod on a device that already has a data2ext script will give this error. Make sure to delete all other data2ext scripts if present. Since you are stuck at boot screen, you will have to reflash the rom. Make sure to do Mounts and Storage>Format /system before flashing the new rom. There are two ways by which you can install CronMod. First one is by flashing the zip from CWM (in that case you have to mount /system before flashing). Second one is the easiest one. Just extract the CronMod zip file. You will get a file 40int2ext in /system/etc/init.d/. Now extract the rom that you are going to flash, put the file 40int2ext in /system/etc/init.d/ and then compress it back. Done! Now flash the rom and you are good to go. Try the second method. Make sure you have an ext partition and the rom has init.d support (all custom roms has init.d support). If that method doesn't work or devices lags like hell, then post here and I'll be glad to share the other method. Hope I Helped
First, english is not my native language, so mistakes can occur
i've installed bieltv.3's CM9 for my Ace-i and it looks great, very smooth. But there're 2 things i don't like.
- The dialer app can't call to anyone. The others only receive calls from my ace but i can't do anything: Try to stop the call, turn back to the launcher by pressing home button, etc
- The google play store always show error 491. I tried many solutions such as deleting and readding google account, clear cache, reinstall it. None works
That's all. And i only can say thanks to anyone who help me with this becuz i'm Vietnamese
CM9 will never be stable for daily use. Bieltv.3 stopped development of it. CM11 has the basic functions working, except the moderate lag it has.
There is a help section for this matter and KAGE is right , dump it in favor of either cm11 or cm7 roms for more stable environments . However some bugs are common among CM's though , due to the fact drivers never been published and other things .
For Google play error 491 have you done the following process , after deleting your Gmail account (delete the Google Play updates too, if you have on your system) :
settings>>Apps>>All> Force stop, Clear data and cache for Google Play Store, Google Service Framework and Download Manager
Reboot your device and add you account ?
Second quick method was about clearing both cache and Dalvik cache through CWM ,, assuming you have done it correctly though .
Another solution which might work for your CyanogenMod 9.1 - BroadcomCM Beta 5 is a specific library and a binary was not included in the ROM ( fixed by Nightly Coder ) :
- Added libdrmframework_jni.so to /system/lib
- Added drmserver to /system/bin
Uninstall your old Google Apps package with the App Manager of the ES File Explorer ( i.e: GoogleApps_GearCM_CM9_20140711) and rest of the instruction from here and here ,, Follow them carefully to resolve your 491 error .
Hope i di help U and next time make your topic @ proper sub forum ( Help section not general part ).
I know and now I'm using cm11 now. It's not so smooth as cm9 and stock GB but it's still so cool. For now I only got 10.23mb left on /system partition because the cm11 was too heavy to put in with other flashable apps even GAPPS. Thanks u guys for advising me. Sorry for bad English
Sent from my GT-S5830i using XDA Free mobile app
doesntexits said:
I know and now I'm using cm11 now. It's not so smooth as cm9 and stock GB but it's still so cool. For now I only got 10.23mb left on /system partition because the cm11 was too heavy to put in with other flashable apps even GAPPS. Thanks u guys for advising me. Sorry for bad English
Sent from my GT-S5830i using XDA Free mobile app
Click to expand...
Click to collapse
For your CM11 , you can get yourself some extra storage by implanting modified version of S2E script/app from this topic .
Here is the installation and guideline process for your convenience mate :
1. Download and install S2E
2 .Reboot in CWM recovery
3. Go to advanced>partition SD card>choose size (512mb or 1024mb)
4. After that choose ext 4 then choose 0mb as swap partition and continue
4. After this is done go to mount and storage and format sd-ext there
5. Reboot your device
6. Open up the S2E app you should see now that it will give you GUI or a menu and can choose 'Applications' and 'Dalvik cache' to send to you sd-ext
7. After doing all that reboot your phone and your done
Hope I did help You
ehsanotaku said:
For your CM11 , you can get yourself some extra storage by implanting modified version of S2E script/app from this topic .
Here is the installation and guideline process for your convenience mate :
1. Download and install S2E
2 .Reboot in CWM recovery
3. Go to advanced>partition SD card>choose size (512mb or 1024mb)
4. After that choose ext 4 then choose 0mb as swap partition and continue
4. After this is done go to mount and storage and format sd-ext there
5. Reboot your device
6. Open up the S2E app you should see now that it will give you GUI or a menu and can choose 'Applications' and 'Dalvik cache' to send to you sd-ext
7. After doing all that reboot your phone and your done
Hope I did help You
Click to expand...
Click to collapse
But the description said that it works only for CM7, CM9, CM11
doesntexits said:
But the description said that it works only for CM7, CM9, CM11
Click to expand...
Click to collapse
Link to the apk/script clearly stated , it was modified for CM11 only , but you can get the general stance of the app/script from play store as well . If you got any problem after you planted it inside your CM11 , please notify me for further assistance .
ehsanotaku said:
Link to the apk/script clearly stated , it was modified for CM11 only , but you can get the general stance of the app/script from play store as well . If you got any problem after you planted it inside your CM11 , please notify me for further assistance .
Click to expand...
Click to collapse
Ok, now i'm using modded s2e from psyke83. It running well, but there's no option that it will mount /system to /sd-ext, only for the /data partition.
doesntexits said:
Ok, now i'm using modded s2e from psyke83. It running well, but there's no option that it will mount /system to /sd-ext, only for the /data partition.
Click to expand...
Click to collapse
SD card has a serious low read and write access in comparison with your internal Nand flash memory , so imagine what will happen to your critical functioning parts of your OS when whole /system partition being transferred into your /SD-ext lol
You just created an ext4 partition on your SD card and used S2E to move your apps and free up internal phone memory , which is the purpose of this mod by moving your Dalvik and applications .
The ext4 partition is mounted as /sd-ext, with directories /mount points for apps, Dalvik cache. The data existing on the internal /data/app, /data/Dalvik-cache, etc, is moved to these new directories and the directories mounted within the /data file system structure of the phone without any effect on your speed and stability of your system. Thus, the phone is using the stuff on /sd-ext ( the ones i instructed )just as it used to use stuff within internal memory.
Hope i Did Help You
ehsanotaku said:
SD card has a serious low read and write access in comparison with your internal Nand flash memory , so imagine what will happen to your critical functioning parts of your OS when whole /system partition being transferred into your /SD-ext lol
You just created an ext4 partition on your SD card and used S2E to move your apps and free up internal phone memory , which is the purpose of this mod by moving your Dalvik and applications .
The ext4 partition is mounted as /sd-ext, with directories /mount points for apps, Dalvik cache. The data existing on the internal /data/app, /data/Dalvik-cache, etc, is moved to these new directories and the directories mounted within the /data file system structure of the phone without any effect on your speed and stability of your system. Thus, the phone is using the stuff on /sd-ext ( the ones i instructed )just as it used to use stuff within internal memory.
Hope i Did Help You
Click to expand...
Click to collapse
Well, if it fails then i will have to use odin once again :. Thanks for advance