Related
hi guys will i finally did it (bootloop)..i have been reading for almost 8 hours now and all i can tell you is i am more confuse then ever..was running open bl with french 2.3.4 and try to put [ROM] R-9 2.3.4GB [KP Base 4.5.91] with EXTRAS! *V4a* on it and went straight into bootloop ....any help getting my phone back up can i flash back to french 2.1.3 thanks
Did you perform fastboot -w? Also you have to be on an int'l kernel
Sent from my MB860 using Tapatalk
capercb said:
hi guys will i finally did it (bootloop)..i have been reading for almost 8 hours now and all i can tell you is i am more confuse then ever..was running open bl with french 2.3.4 and try to put [ROM] R-9 2.3.4GB [KP Base 4.5.91] with EXTRAS! *V4a* on it and went straight into bootloop ....any help getting my phone back up can i flash back to french 2.1.3 thanks
Click to expand...
Click to collapse
You already have unlocked bootloader, so BE CAREFULLY DO NOT RSD ANY DOWNGRADE FROM MOTO in this case 2.1.3
The best way is Download the FULL SBF 2.1.3 and extract the partitions from the SBF and just moto-fastboot to the phone... I will check and will post details
Ok if Nothing else work as for example command "moto-fastboot -w"
You can try this one (need a Windows PC)
1. Make a new folder (for example c:\atrix)
2. Dowload and unzip this file:
http://www.filesonic.com/file/14467...16_A004_M001_ HWolympus_1g_Service1FF.sbf.gz
You will end after unzipped with a file as follow put it inside of the new folder:
OLYEM_U4_2.1.3_SIGNED_UCAOLYPORTFR_P016_A004_M001_%20%20HWolympus_1g_Service1FF.sbf
3. Download this file:
http://rapidshare.com/files/453821014/MotoAndroidDepacker.zip
and unzipped on the same new folder
4. Now run MotoAndroidDepacker.exe
5. Menu->Open File->OLYEM_U4_2.1.3_SIGNED_UCAOLYPORTFR_P016_A004_M001_%20%20HWolympus_1g_Service1FF.sbf
6. Menu->Split To FOlder
7. You will end with a new folder with a long name as follow:
OLYEM_U4_2.1.3_SIGNED_UCAOLYPORTFR_P016_A004_M001_%20%20HWolympus_1g_Service1FF-extracted
8. Now rename the following files as follow:
CG55.smg -> recovery.img
CG56.smg -> boot.img
CG57.smg -> system.img
CG58.smg -> webtop.img
CG62.smg -> preinstall.img
9. Move those files to the new folder C:\atrix
10. Download this file (moto-fastboot) and unzip it to the new folder C:\atrix
http://forum.xda-developers.com/attachment.php?attachmentid=635568&d=1308927194
12. Disconect the USB form the phone, Turn off the Phone and now Press VOL down while you turn on the phone until show up "unlocked" tag and under this "fastboot" tag, now press once VOL up and it will show up a tag that it said "Starting fastboot.....", now connect the phone to the PC
11. Now open a DOS windows (cmd.exe) and go to the foler C:\atrix and run the following commands:
moto-fastboot flash boot boot.img
moto-fastboot flash system system.img
and finally
moto-fastboot -w
moto-fastboot reboot
and Done it must boot without any problem
thanks mramirezusa ...somehow i got it booted and now running 2.3.4. build # 4.5.91 ...i follow through with your thread and have everything ready to go but will hold off for now..i should have posted 7 hours ago and my head would be still in the game ( to much reading ) just hate when u find a thread and some how it go sideway's with people asking questions that don't belong . will be trying to get it back to the french 2.3.4 international...thanks again
capercb said:
thanks mramirezusa ...somehow i got it booted and now running 2.3.4. build # 4.5.91 ...i follow through with your thread and have everything ready to go but will hold off for now..i should have posted 7 hours ago and my head would be still in the game ( to much reading ) just hate when u find a thread and some how it go sideway's with people asking questions that don't belong . will be trying to get it back to the french 2.3.4 international...thanks again
Click to expand...
Click to collapse
Your Welcome!
same problem
Hey Im having the same problem, I have the Att Atrix will this work ? or do I need a different file since his was international
wrath663 said:
Hey Im having the same problem, I have the Att Atrix will this work ? or do I need a different file since his was international
Click to expand...
Click to collapse
is ur phone rooted?
is ur phone unlocked?
does it have CWM installed?
if yes then use fruitcake http://forum.xda-developers.com/showthread.php?t=1163009
if no then what is ur current rom?
I am having the same problem. The bootloader is not unlocked. I was rooted and running Gingerblur 3.5. When I attempted to upgrade to alien, everything went awry. I followed the commands above (intended for unlocked, I know, but Im getting desperate) and recieved the following error "failed to boot 2, starting RSD mode"
Please help!
in this thread, i will upload flashable Radio.img for GSM Razr
********************************************
do you have fastboot package?
you have to make a folder in local disc C (c:// fastboot) & extract the fastboot package into this folder
fastboot package for Windows
fastbootpackage for Linux 64bit
fastbootpackage for Linux 32bit
Click to expand...
Click to collapse
********************************************
iNSTRUCTION:
1- download the Radio.img u want to install & put it in Fastboot folder
2- run a command & go to fastboot folder
(cd/
cd fastboot)
3- put your phone on AP Fastboot mod [turn of the phone => hold vol+ &vol- & power at the same time => choose AP fastboot (vol- to scroll & vol+ to select)]
4- connect the phone to pc via USB
5- Use the related code for each radio
6- thank me
***********************************
DOWNLOADS:
A. Radio U_03.1C83P from 6.5.1-73_23-SPU-11_SIGNEuropeAustraliaEMEA
Code:
cd/
cd fastboot
fastboot flash radio Radio.img
fastboot reboot
B. Radio U_03.1C.85P from 6.5.1-73_30-SPU-11_SIGNEuropeAustraliaEMEA
Code:
cd/
cd fastboot
fastboot flash radio Radio.img
fastboot reboot
C.RadioU_03.1C.23P from Version: 65.88.13 China retail
Code:
cd/
cd fastboot
fastboot flash radio RadioU_03.1C.23P.img
fastboot reboot
Nice work zeidof
Sent from my XT910 using Tapatalk
What is this for?
WHat does it do? DOes it work on Stock ROM? I've got Stock ROM but phone is rooted.
inheme said:
What is this for?
Click to expand...
Click to collapse
cheekrox said:
WHat does it do? DOes it work on Stock ROM? I've got Stock ROM but phone is rooted.
Click to expand...
Click to collapse
C78P radio had some issues & there was a problem with text messaging, this can solve text messaging issues, this Radio is stronger than 78P, also this Radio is from 2.3.6 OTA update,
And yes cheekrox, u can flash it on your rooted stock rom
Sent from my XT910 using Tapatalk
Your radios can be inserted into the EternityProject ROMs Thread as they, yup, they're unofficial packages, but flashing official radios.
We should only be sure that those packages are working.
op is updated
im getting horrible speed with 85P
Edit: hey buddy, i sent you a PM, please advise, TIA
thanksgiving60 said:
im getting horrible speed with 85P
Edit: hey buddy, i sent you a PM, please advise, TIA
Click to expand...
Click to collapse
Really? I on the other hand have incredible speed increase with the 85P radio. Using it with .150 update.
Sent from my XT910 using Tapatalk
ales100i said:
Really? I on the other hand have incredible speed increase with the 85P radio. Using it with .150 update.
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
sorry, i should have stated that im currently residing in asia, maybe thats why the bad speed with this European radio
Does this work with The Arctic?
I can confirm that Radio U_03.1C.85P flashed fine on 150.1 rom. Will post my results.
Teşekkürler kardeşim.
pajn said:
Does this work with The Arctic?
Click to expand...
Click to collapse
It does on my german device.
Hi there:
I when through and flash the 85P in the Latin America firmware from Brasil that is posted in the forum. The flash apparently did when through, the phone rebooted, enter the recovery mode with the little android, it changed to a triangle with an exclamation sign and later on rebooted just fine and I have signal. In the about phone, the baseband number still appears as the old one. Is that a sign that the flash does not indeed when through, or it is just a build.pro thing. Any code on the dialer to check what baseband is running on the phone??
[Q] # fastboot flash radio new_radio.img ? YES YOU CAN! :)
Is it possible to use Android SDK's tool; fastboot ?
Of course the RAZR is in AP Fastboot mode. . I am only using GNU/Linux and usually I use the fastboot tool to flash my N1's radio.
Example
Code:
# fastboot flash radio new_radio.img
Updates:
YES! I able to flash the radio with the fastboot method.
Anyway, do it at your own risk!.
Thank you.
pajn said:
Does this work with The Arctic?
Click to expand...
Click to collapse
It should be work
ellopr said:
Hi there:
I when through and flash the 85P in the Latin America firmware from Brasil that is posted in the forum. The flash apparently did when through, the phone rebooted, enter the recovery mode with the little android, it changed to a triangle with an exclamation sign and later on rebooted just fine and I have signal. In the about phone, the baseband number still appears as the old one. Is that a sign that the flash does not indeed when through, or it is just a build.pro thing. Any code on the dialer to check what baseband is running on the phone??
Click to expand...
Click to collapse
no it didn't installed, you can extract the radio.img file & apply in cmd via fastboot
bahathir said:
Is is possible to use Android SDK's tool; fastboot ?
Example
Code:
# fastboot flash radio new_radio.img
Thank you.
Click to expand...
Click to collapse
Sure, you can do that,
After unzipping the file, rename the radio file to "radio.img",
Then go on with "fastboot flash radio radio.img"
Sent from my XT910 using Tapatalk
I flashed it with fastboot but same thing happen. I got a ok sending and writing radio at cmd and the phone booted to the little android screen. The bar started to fill up, at haft of it the icon changed to a triangle with an exclamation point. After some second it rebooted and in the about I still have the same old baseband information from the Latin American Fastboot file that is here in the forums, not the new one as 85P.
zeidof said:
no it didn't installed, you can extract the radio.img file & apply in cmd via fastboot
Click to expand...
Click to collapse
Thank you.
Please add the fastboot method in your 1st post.
2nd question:
Is it possible to downgrade the firmware after installing higher version of the firmware.
Example:
If my current radio firmware version is ...78P and upgraded to 85P. Then, I want to downgrade to 73P again... is this possible?
Tips:
To make life easier, you can put the RAZR directly into AP Fastboot mode using # adb reboot bootloader while the RAZR is up running.
In my case, after the fastbott flash ... RAZR displayed the Android robot and open box, with progress bar. After few minutes, it restarted normally.
Remember to md5sum the radio.img file before flashing. The md5 value is in the .xml file.
bahathir said:
In my case, after the fastbott flash ... RAZR displayed the Android robot and open box, with progress bar. After few minutes, it restarted normally.
Remember to md5sum the radio.img file before flashing. The md5 value is in the .xml file.
Click to expand...
Click to collapse
Mine start with the open box, at like half the progress bar it changes to the triangle with the question Mark. Tgen after maybe 10 seconds it reboots
Sent from my XT910 using XDA App
I found this one click radio flasher software on a chinese forum
the program itself is in chinese but it is as straightforward as it gets
download the file
unzip
make sure you have the usb drivers installed on your pc
enter AP fastboot mode
connect your phone to your pc
enter 1 for 78P radio 2 for 83P, or 3 for 85P
hit enter
it will start the flashing process (this part will be in english)
it will reboot automatically when its done
http://www.multiupload.com/PN9XDBQBTX
So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Newbieshwa said:
So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Click to expand...
Click to collapse
loooool, nice copy/paste
you are welcome
Sent from my XT910 using Tapatalk
Thank you very much sirs above, your post will hopefully fix my problems with my phone. I will try it, and write here.
Thanks
PS: Could you fix the links? They don't work.
It worked, that's awesome. Thank you a lot.
Is there a way to get The Arctic on to your phone without this happening? Or why did that happen to me?
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
dewage said:
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
Click to expand...
Click to collapse
i bricked my phone revcently...even i need the corect stock rom..can any one give me the link to me retail phone ie middle east????
bricked
anyone know where I can purchase the charger needed to charge my droid razr after bricking and battery dying while restoring via RSD? see picture attached
the fastboot link is not working for me
rahulwadhwani said:
the fastboot link is not working for me
Click to expand...
Click to collapse
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
for people looking for fastboot to use in the guide above:
http://forum.xda-developers.com/showthread.php?t=1362956
How about mac users? I think the do not need drivers right?
If you use safestrap recovery you have a better chance of not bricking your phone. It works awesome and recommend to anybody who flashes roms a lot. Im not too sure if it works for xt910, but it works awesome on my xt912.
http://forum.xda-developers.com/showthread.php?t=1391900
Sent from my DROID RAZR using XDA
zeidof said:
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
Click to expand...
Click to collapse
My current ROM is Cynogenmod 9.0 4.0.3 and I wanna downgrade back to 2.3.6 I don't know how to do that. I am badly stuck
I tried to download the tools and every link said 404 not found.... any help with this ?
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
ZolaSlo said:
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
Click to expand...
Click to collapse
Are you using RSD 5.7? 5.6+ Should work fine.
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
What a life saver man....thanx a lot
Syriochan said:
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
Click to expand...
Click to collapse
Hold the -Vol and the power button to force the device off.
now i am back to stock unrooted os. If i root my phone again will i still be able to get the forthcoming official update this month for my RAZR XT910?
Hello guys,
Let me preface this with the fact that I have been searching this forum for the past hour and could not find anything pertinent for my situation.
I've updated to the latest GSM OTA (the Vodafone EU one) and all was great, decided to reboot my phone and got into a bootloop. I don't have a recovery to boot from and going to be short on battery soon.
The way I see it, I'm stuck with a bricked phone until the RSD package for the OTA is released. Is that correct? am I missing anything?
Can anyone point me to a relevant thread where I can catch a break?
Cheers!
tuxcomputing said:
Hello guys,
Let me preface this with the fact that I have been searching this forum for the past hour and could not find anything pertinent for my situation.
I've updated to the latest GSM OTA (the Vodafone EU one) and all was great, decided to reboot my phone and got into a bootloop. I don't have a recovery to boot from and going to be short on battery soon.
The way I see it, I'm stuck with a bricked phone until the RSD package for the OTA is released. Is that correct? am I missing anything?
Can anyone point me to a relevant thread where I can catch a break?
Cheers!
Click to expand...
Click to collapse
Fixed, please close.
How did you fixed it?
Sent from my XT910 using xda premium
Please tell us how you fixed this, i have same problem but i already screwed it up more by trying to flash back to ics after i was stuck at boot on JB vodafone. Now i have bricked phone and i wait for Fastboot files, which we dont know when will come out
Got the same problem here
Alright, here goes.
I am not responsible to whatever happens to your phones. This process is described for the Vodafone OTA.
Also, you will lose root
I'm guessing your phones are in a constant bootloop right about now. If they are, you have to make sure you still have some battery left so that on AP Fastboot it shows battery OK. If you don't, follow the guides here to get more juice or get a 'factory cable' and charge your phone.
To download:
- Fastboot from here: http://dfiles.eu/files/bih3tmg7b
- OTA kernel (here: http://d-h.st/xat )
- The whole OTA here ON YOUR SDCARD
- original ICS RSD Image here
Process:
Extract the fastboot somewhere accessible like c:/fastboot
Extract the kernel and the original ICS files on your desktop
Copy the OTA kernel (boot_3.0.8-g7198280) to your c:/fastboot folder
Copy 'system_signed' from the original ICS archive to your fastboot folder
Open the command prompt (search for cmd.exe in your programs)
Navigate to c:/fastboot (use "cd .." to excape a folder and "dir" to list the files in a folder )
Go to AP fastboot on your phpne and do the following from the command prompt:
fastboot flash boot boot_3.0.8-g7198280.img
fastboot flash system system_signed
fastboot reboot-bootloader
Now restart your phone and enter recovery the normal way volUp+volDown + power button then select Recovery, then volUp+volDown to see the menu.
Do a factory reset
Flash the OTA (that should be on your card)
Reboot
Ta-da!
If after the whole process you get a flash failure when rebooting your phone, use this guide to get rid of that: http://forum.xda-developers.com/showthread.php?t=1634223
If this helped you, please show the 'Thanks' button some love. Also, post here if you run into trouble, DO NOT PM!
tuxcomputing said:
Alright, here goes.
I am not responsible to whatever happens to your phones. This process is described for the Vodafone OTA.
Also, you will lose root
I'm guessing your phones are in a constant bootloop right about now. If they are, you have to make sure you still have some battery left so that on AP Fastboot it shows battery OK. If you don't, follow the guides here to get more juice or get a 'factory cable' and charge your phone.
To download:
- Fastboot from here: http://dfiles.eu/files/bih3tmg7b
- OTA kernel (here: http://d-h.st/xat )
- The whole OTA here ON YOUR SDCARD
- original ICS RSD Image here
Process:
Extract the fastboot somewhere accessible like c:/fastboot
Extract the kernel and the original ICS files on your desktop
Copy the OTA kernel (boot_3.0.8-g7198280) to your c:/fastboot folder
Copy 'system_signed' from the original ICS archive to your fastboot folder
Open the command prompt (search for cmd.exe in your programs)
Navigate to c:/fastboot (use "cd .." to excape a folder and "dir" to list the files in a folder )
Go to AP fastboot on your phpne and do the following from the command prompt:
fastboot flash boot boot_3.0.8-g7198280.img
fastboot flash system system_signed
fastboot reboot-bootloader
Now restart your phone and enter recovery the normal way volUp+volDown + power button then select Recovery, then volUp+volDown to see the menu.
Do a factory reset
Flash the OTA (that should be on your card)
Reboot
Ta-da!
If after the whole process you get a flash failure when rebooting your phone, use this guide to get rid of that: http://forum.xda-developers.com/showthread.php?t=1634223
If this helped you, please show the 'Thanks' button some love. Also, post here if you run into trouble, DO NOT PM!
Click to expand...
Click to collapse
I tried your method but I get a:
Preflash validating failure
when writing the system_signed to the device
pirondello said:
I tried your method but I get a:
Preflash validating failure
when writing the system_signed to the device
Click to expand...
Click to collapse
That's weird. Prolly the flash was messed up somewhere..
Try this before "fastboot flash boot boot_3.0.8-g7198280.img":
extract recovery_signed and allow-mbmloader-flashing-mbm.bin from the ICS folder and put them into the fastboot folder
do this
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot flash recovery recovery_signed
Let me know if that works
tuxcomputing said:
That's weird. Prolly the flash was messed up somewhere..
Try this before "fastboot flash boot boot_3.0.8-g7198280.img":
extract recovery_signed and allow-mbmloader-flashing-mbm.bin from the ICS folder and put them into the fastboot folder
do this
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot flash recovery recovery_signed
Let me know if that works
Click to expand...
Click to collapse
Unfortunately still the same problem, can't flash the system_signed file.
Really appreciate your help, thank you anyway!
tuxcomputing said:
That's weird. Prolly the flash was messed up somewhere..
Try this before "fastboot flash boot boot_3.0.8-g7198280.img":
extract recovery_signed and allow-mbmloader-flashing-mbm.bin from the ICS folder and put them into the fastboot folder
do this
fastboot flash mbm allow-mbmloader-flashing-mbm.bin
fastboot reboot-bootloader
fastboot flash recovery recovery_signed
Let me know if that works
Click to expand...
Click to collapse
Well i give you thumbs up and thanks for you helping hand, however it still doesnt work gives preflashvalidation failure on system_signed flashing. If you have some more ideas it would be really nicce to try, meanwhile i think we will just have to wait for fastboot files. Verizon version for xt912 got FF already maybe we will get ours in a week or so.
Use this method .. Hsd pilot again nailed it to save our asses ..
It should definatly unbrick your mobile because i tried it on same version and i am back on jellybean ..
http://forum.xda-developers.com/showthread.php?t=2194825
Hit the thx to hsd pilot on the op and me if ya think i helped ya to share link :thumbup:
Thx in advance btw
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
Edit: Always refresh before you reply
anurag.dj2u said:
Use this method .. Hsd pilot again nailed it to save our asses ..
It should definatly unbrick your mobile because i tried it on same version and i am back on jellybean ..
http://forum.xda-developers.com/showthread.php?t=2194825
Hit the thx to hsd pilot on the op and me if ya think i helped ya to share link :thumbup:
Thx in advance btw
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
Click to expand...
Click to collapse
Didn't work for me. Flashing went fine but when trying to enter recovery I get "Invalid Flash Mode (S) (Boot Failure)
HSD-Pilot said:
Edit: Always refresh before you reply
Click to expand...
Click to collapse
Sorry again :thumbdown:
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
No, you was first, i mean myself
HSD-Pilot said:
No, you was first, i mean myself
Click to expand...
Click to collapse
TeddyOFLove said:
Well i give you thumbs up and thanks for you helping hand, however it still doesnt work gives preflashvalidation failure on system_signed flashing. If you have some more ideas it would be really nicce to try, meanwhile i think we will just have to wait for fastboot files. Verizon version for xt912 got FF already maybe we will get ours in a week or so.
Click to expand...
Click to collapse
For your information, I managed to unbrick my phone. Problem seemed to be my CID.IMG. After erasing it, I could enter recovery and installl JB from ext-sdcard. Now I have to use BP Tools tools to boot, because as soon as I restore CID, the device doesn't boot.
Really strange, because my phone is actually from Europe (d/a/ch), Switzerland. Maybe it's due to the fact that I switched to the chinese JB Ota leak before updating to the EU leak.
First : sorry about my bad english
Hi, i have a Motorola Droid Razr XT909 from Japan, my phone have a problem and can't boot , it only stop at fastboot screen. I try to install another rom, but i can't flash kernel boot.img
AP Fastboot Flash Mode (S) ( Flash Failure)
0A.6C
To return to normal mode - first press power key to poser down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Click to expand...
Click to collapse
i Follow here http://forum.xda-developers.com/showthread.php?t=2483999 but i can't found my phone's rom in there, i search for this on gg and found this http://pan.baidu.com/share/link?shareid=1275147586&uk=3909257495 but it's protect by password and i can't unzip .
So:
Anyone have this password? or another link?
cugia1991 said:
found this http://pan.baidu.com/share/link?shareid=1275147586&uk=3909257495 but it's protect by password and i can't unzip .
So:
Anyone have this password? or another link?
Click to expand...
Click to collapse
Recently I had downloaded that file and unzip it normally without password and any problems.
You can read my history of flashing xt909: http://forum.xda-developers.com/showthread.php?p=50559788
Try to flash xt912 firmware. I think it can help you. And don't do like me: don't flash xt910's 4.1.2 firmware.
virusalone said:
Recently I had downloaded that file and unzip it normally without password and any problems.
You can read my history of flashing xt909: http://forum.xda-developers.com/showthread.php?p=50559788
Try to flash xt912 firmware. I think it can help you. And don't do like me: don't flash xt910's 4.1.2 firmware.
Click to expand...
Click to collapse
tks so much.
i had erase cid and flash rom xt912 :laugh:
but have to use a USB Factory Cable