Hi all,
My device runs cm-10 and always,after looses wifi,has SOD so please help me to fix it.
Thank you!
Sent from my GT-I9100 using xda premium
greenemperor said:
Hi all,
My device runs cm-10 and always,after looses wifi,has SOD so please help me to fix it.
Thank you!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First post your ROM and kernel details, Goto Settings - About, and post everything you see
Swyped from my Samsung Galaxy SII
I run Kalgecin's CM-10 with Siyah 4.1.5,i had LPX modem and replace it with LP7 ,to see if the reason is the modem..
The details that you asked:
Signal strength -103 dMm 3asu
mobile network type
HSDPA 8
Thank you again!
greenemperor said:
I run Kalgecin's CM-10 with Siyah 4.1.5,i had LPX modem and replace it with LP7 ,to see if the reason is the modem..
The details that you asked:
Signal strength -103 dMm 3asu
mobile network type
HSDPA 8
Thank you again!
Click to expand...
Click to collapse
Sod is the kernel. Try to flash another one I hear dorimanx is making good progress on his kernel
Sent from my GT-I9100 using xda premium
Just set your idle cpu to 100 to 200mhz because lower than that you might get sod. Mine is 100mhz using siyah with extweak app.
Sent from my GT-I9100 using Tapatalk
UnwiredDroid said:
Just set your idle cpu to 100 to 200mhz because lower than that you might get sod. Mine is 100mhz using siyah with extweak app.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I have set it to 200,I don't think that this is the issue.
Sent from my GT-I9100 using xda premium
greenemperor said:
I have set it to 200,I don't think that this is the issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Have you undervolted it?
Sent from my GT-I9100 using xda premium
kilometers4 said:
Have you undervolted it?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Nope,default settings,luzactiveq/sio settings.
Sent from my GT-I9100 using xda premium
greenemperor said:
Nope,default settings,luzactiveq/sio settings.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try a different governor, like smartassv2.
greenemperor said:
Nope,default settings,luzactiveq/sio settings.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Use ondemand and SIO or the default Siyah governor.
Lulzactive was the cause of your problem.
Swyped from my Samsung Galaxy SII
I have a similar problem with custom roms. I have only tried 3 (Paranoid Android, Resurrection Remix and Slimbean) and the all had frozen my phone at least once a day while the screen is on. So I had to pull the battery then it decreases my battery significantly. I also tried different kernels but still the same result.
I don't undervolt or overclock it So I honestly don't understand why it's doing it. I however set the governor to performance.
Any help please? It's getting rather annoying. Thanks guys.
Sent from my GT-I9100 using xda premium
*boy*racer* said:
I have a similar problem with custom roms. I have only tried 3 (Paranoid Android, Resurrection Remix and Slimbean) and the all had frozen my phone at least once a day while the screen is on. So I had to pull the battery then it decreases my battery significantly. I also tried different kernels but still the same result.
I don't undervolt or overclock it So I honestly don't understand why it's doing it. I however set the governor to performance.
Any help please? It's getting rather annoying. Thanks guys.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
1. Post your present ROM and kernel details
2. Post your kernel configuration
3. Next time you have SOD/freeze, there is no need to pull the battery, just hold the power button for about 10secs, your device will restart
Jokesy said:
1. Post your present ROM and kernel details
2. Post your kernel configuration
3. Next time you have SOD/freeze, there is no need to pull the battery, just hold the power button for about 10secs, your device will restart
Click to expand...
Click to collapse
Thanks mate for the reply. Here are some screenshots.
Again thanks
Originally Posted by Jokesy<br />
1. Post your present ROM and kernel details<br />
2. Post your kernel configuration<br />
3. Next time you have SOD/freeze, there is no need to pull the battery, just hold the power button for about 10secs, your device will restart
Click to expand...
Click to collapse
<br />
<br />
Thanks mate for the reply. Here are some screenshots. <br />
Again thanks
Click to expand...
Click to collapse
Performance governor caused the problem, if you want performance boost with Siyah kernel then use performance profile.
1. Uninstall voltage control
2. Download Extweaks from market
3. Run Extweaks
4. Reboot to recovery
5. Select kernel specific option
6. Select performance profile for Extweaks
7. Reboot phone
Your phone should fly now without freezing
Swyped from my Samsung Galaxy SII
Jokesy said:
Performance governor caused the problem, if you want performance boost with Siyah kernel then use performance profile.
1. Uninstall voltage control
2. Download Extweaks from market
3. Run Extweaks
4. Reboot to recovery
5. Select kernel specific option
6. Select performance profile for Extweaks
7. Reboot phone
Your phone should fly now without freezing
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks but I changed governor to smartass 2 but I still had a freeze..but I will try use the kernel tweak instead.
I have just formatted my external sdcard as I have read corrupted files may cause freeze.
I have also noticed that it does it when the phone is on charge and while on the xda app lol. But then again that is what I am mostly on when I'm on my phone: )
Sent from my GT-I9100 using xda premium
*boy*racer* said:
Thanks but I changed governor to smartass 2 but I still had a freeze..but I will try use the kernel tweak instead.
I have just formatted my external sdcard as I have read corrupted files may cause freeze.
I have also noticed that it does it when the phone is on charge and while on the xda app lol. But then again that is what I am mostly on when I'm on my phone: )
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i believed the reason why you changed your governor to performance was because you wanted to boost performance.
Siyah default governor favors more performance, use default governor.
If you want performance, then
Boot to recovery
Kernel specific option
Reset Extweaks profile settings
Select performance profile.
Reboot phone.
Change every other thing except the governor.
Now that you are experiencing freezes, use stable configuration first
Swyped from my Samsung Galaxy SII
Hi
I have the following setup:
ICS 4.0.3
MIUI v: 2.9.21
Baseband: I9100XXLQ6
Kernel: [email protected]))
Build no: MIUI-2.9.21 IML74K
Before this I had lots of other roms whether that be stock(latest) or custom. Same with kernels!
Its been almost a year that i have my S2 and I had never the luck to have a stable phone without the SODs!!!
Can anyone help me through this?
Thanx
Related
can i flash franco's kernel on cm7? and if so, will there be a significant boost on my phone's performance or the other way around?? thanks!
Check this topic mate this question already had a place here: http://forum.xda-developers.com/showthread.php?t=1097187
yes you can . i did and i like the performance
there seems to be a battery drain issue on mine though.
Install setcpu set governer to savezed. If you are using 3g for data than battery consumption is higher.
Sent from my LG-P500 using XDA Premium App
4silvertooth said:
Install setcpu set governer to savezed. If you are using 3g for data than battery consumption is higher.
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
I have been using CM7 with franco's kernel since yesterday and the battery consumption is much higher.
I think i need to shift to a froyo rom like openoptimus etc.
@silvertooth what do you say ??
DJoptimus-One said:
I have been using CM7 with franco's kernel since yesterday and the battery consumption is much higher.
I think i need to shift to a froyo rom like openoptimus etc.
@silvertooth what do you say ??
Click to expand...
Click to collapse
Why? How much are you getting?
I am getting around 20 hours with 2g data on continuously and around 1% overnight. Pretty good for me. If you want to switch to Froyo, right now devoid.franco is pretty good.
r291 said:
Why? How much are you getting?
I am getting around 20 hours with 2g data on continuously and around 1% overnight. Pretty good for me. If you want to switch to Froyo, right now devoid.franco is pretty good.
Click to expand...
Click to collapse
Can you give me an alternate link for devoid ?
Right now, how can i decrease my CPU speed in CM7 ??
http://www.multiupload.com/3DL062BVFT
This is the only link i can get.
You mean frequency? You have to use an app called SetCPU which is free for xda members.
http://forum.xda-developers.com/showthread.php?t=505419
You can choose the governor and Frequency.
r291 said:
http://www.multiupload.com/3DL062BVFT
This is the only link i can get.
You mean frequency? You have to use an app called SetCPU which is free for xda members.
http://forum.xda-developers.com/showthread.php?t=505419
You can choose the governor and Frequency.
Click to expand...
Click to collapse
Thanks mate
You should lower the brightness it will save u battery.. also NEW users don't flash devoid Franco rom right now as he is making some changes in rom and he gets angry for stupid question in his thread. Wait one or two days. As the current rom and latest kernel v14 having some trouble.
Sent from my LG-P500 using XDA Premium App
4silvertooth said:
You should lower the brightness it will save u battery.. also NEW users don't flash devoid Franco rom right now as he is making some changes in rom and he gets angry for stupid question in his thread. Wait one or two days. As the current rom and latest kernel v14 having some trouble.
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Hey mate, i need help again. My "USB Mass Storage" has stopped working. My phone gets on "charging" when i plug in the USB cable, even it shows the usb icon on top-left status bar. But like before it doesnt show the "Mass storage screen" with the android bot and a button to "enable USB mass storage"
Please help
Pull down status bar than click USB what ever....
Sent from my LG-P500 using XDA Premium App
Tried. It takes me back to the homescreen
Sent from my LG-P500 using XDA App
Well try something like unmount the card Setting > Storage > Unmount.. than mount. I can't help u here much. Is the sdcard accessible in rom?
Sent from my LG-P500 using XDA Premium App
Hey guys. Just want to share my experience. I'm currently on cm7 6.5.1 build with francos tweaks but with native cm7 kernel.So what I did is charged my phone to 100% flashed cm7,wiped battery stats. And my battery last 38 hours. with like 1h listening music 1h Wifi 3g always enabled maybe like 10 minutes calls, phone brightness on 25%.
Sent from my LG-P500 using XDA Premium App
hey guys, i don't know how these tweaks work,.uhmm,first, franco said that in his new kernel, the tweaks are already included, ryt??? when i flash that kernel, are all the tweaks applied once installed??? do i have to do anything else to enable the tweaks??? i really don't know.hope you can help me,.an another thing, flashing franco's tweaks need sd partitioning??? can i just flash it via CWM??? sorry for all the questions, just wanted to clarify things. thanks in advance for ur responses. ^^
roi14 said:
hey guys, i don't know how these tweaks work,.uhmm,first, franco said that in his new kernel, the tweaks are already included, ryt??? when i flash that kernel, are all the tweaks applied once installed??? do i have to do anything else to enable the tweaks??? i really don't know.hope you can help me,.an another thing, flashing franco's tweaks need sd partitioning??? can i just flash it via CWM??? sorry for all the questions, just wanted to clarify things. thanks in advance for ur responses. ^^
Click to expand...
Click to collapse
That the tweaks are included means you don't need to do anything to enable them.
No kernel requires any sd card partitioning.
Yes, you can flash it via CWM. Just wipe cache and battery stats first.
Sent from my LG Optimus One P500 using XDA App
so that means that the tweaks are already enabled when the phone boots up??? thanks man for your response!
Im on wicked rom and siyah 2.6.6 do i need to flash anything else on to it. I heard people talk about battery scripts and all that. And changing the voltage and im not sure if im suppose to flash on a script or something. If there is something i need to flash then someone let me know. I just want a good battery thats why i choose siyah so maybe this script stuff is good. Plus theres not one theres mutiple scripts so then which one. Its all very confusing to me :? Soneone enlighten me please
Thks
Sent from my GT-I9100 using XDA App
Ask in the Siyah thread in the development section.
No you don't need cuz in version 2.6.3 we see
removed siyah-battery, siyah-defaults and siyah-performance scripts from the blog. please remove all existing scripts before installing this version (or flash your existing rom again to remove all scripts). use init.d scripts if you know what you do, otherwise use VoltageControl app or ThunderBolt! scripts. use this CWM recovery flashable zip to remove previous 01siyah script. just flash it once and /system/etc/init.d/01siyah script will be removed.
Click to expand...
Click to collapse
and for 2.6.6 you don't need zip for battery.
The scripts people are talking about are pikcahu's thunderbolt! scripts, you dont need to flash them if you dont want to, they can help, but performance/batt are good at stock values.
(Part of thunderbolt! is built into the kernel anyway)
Thanks guys so i should leave it at wat its at when i flashed 2.6.6
Sent from my GT-I9100 using XDA App
jaher said:
Thanks guys so i should leave it at wat its at when i flashed 2.6.6
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
if it feels fine to you, then sure, if you want to tweak and mess about, then thats fine as well.
Lol kl at the moment its nothing special then again i only flashed it yesturday. Do u think there is any point using set cpu with 2.6.6
Sent from my GT-I9100 using XDA App
jaher said:
Lol kl at the moment its nothing special then again i only flashed it yesturday. Do u think there is any point using set cpu with 2.6.6
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
What do you want to change?
I would use voltage control myself, though with 2.6.6 it wont set max frequency correctly, that's supposed to be fixed next kernel version.
Well i use it to clock cpu lower at low battery and screen off
Sent from my GT-I9100 using XDA App
jaher said:
Well i use it to clock cpu lower at low battery and screen off
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yeh you can use setcpu to-do that, if you want! It wont hurt anything. Dont Undervolt to much or you may get instability.
By undervolt u mean underclocking right ?
Sent from my GT-I9100 using XDA App
jaher said:
By undervolt u mean underclocking right ?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
No.. undervolting is lowering the voltage at each frequency step
Underclocking is lowering the max frequency.
eg setting the max to 1000mhz would be underclocking
setting 1000mhz to 1100mV would be undervolting (just an example)
I havent even touched voltage settings i have no exp in tht
Sent from my GT-I9100 using XDA App
Wat would you say is better ondemand or this new lulzactive l. Whats the diff.
Sent from my GT-I9100 using XDA App
Dear members.
I recently installed RR3.0.6 with Siyah 3.0.6 and im having some difficulties with my battery life and random shutdowns.
My battery discharges very quick. And sometimes when I turn my screen off my phone shts down. I have to turn it on myself again.
What can it be and what can i do about it?
Kind regards
Gino brugman
Sent from my GT-I9100 using xda app-developers app
lexaniji said:
Dear members.
I recently installed RR3.0.6 with Siyah 3.0.6 and im having some difficulties with my battery life and random shutdowns.
My battery discharges very quick. And sometimes when I turn my screen off my phone shts down. I have to turn it on myself again.
What can it be and what can i do about it?
Kind regards
Gino brugman
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
1. Many things can make battery discharge quickly; apps, kernel etc.
- Download Better battery stats and use it to track down what's causing wakelocks.
- Download cpuspy to check your cpu activity
- Download Rescan Media Root, and use it to disable the media scanner on boot.
2. That's probably screen of death, SOD. did you change any settings in Extweaks?
Swyped from my Samsung Galaxy SII
no problems here with RR 3.06 and siyah 4.15
It is better battery there than stock rom I find.:good:
I only changed max mhz to 1ghz. And nothing else.
lexaniji said:
I only changed max mhz to 1ghz. And nothing else.
Click to expand...
Click to collapse
Ok.
Follow this:
-Boot to CWM recovery
-Flash kernel cleaning script,
-Then flash Siyah kernel
If you still face battery issue, then follow step 1. In my previous post
Swyped from my Samsung Galaxy SII
And if nothing works for you.. you can always try switching kernel, latest Dorinmax is pretty good
Sent from my GT-I9100
I didnt try your first options yet. But im not home so i cant download too much. What kernel cleaning script do i need? Do i need to flash it like a normal kernel?
Will the dorminax kernelwork on RR?
Sent from my GT-I9100 using xda app-developers app
lexaniji said:
I didnt try your first options yet. But im not home so i cant download too much. What kernel cleaning script do i need? Do i need to flash it like a normal kernel?
Will the dorminax kernelwork on RR?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Download the cleaning script here: forum.xda-developers.com/showthread.php?t=1363738&highlight=ultimate+kernel+cleaning+script
Flash it like normal kernel, before flashing your kernel
Swyped from my Samsung Galaxy SII
The download link from billion uploads doesnt work for me. Any alternatives? Kind regards
Sent from my GT-I9100 using xda app-developers app
Just installed Dorimanx kernel 5.78. Lets see if this works for me. Any tips for better battery in extweaks with this kernel?
Sent from my GT-I9100 using xda app-developers app
lexaniji said:
Just installed Dorimanx kernel 5.78. Lets see if this works for me. Any tips for better battery in extweaks with this kernel?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Battery profile in Extweaks gives a decent battery performance without a noticeable drop in performance.
You can only change profile in Extweaks plus (paid version).
If you are using the free version, then,
- Boot to CWM recovery
- Select kernel specific options
- Set battery profile for Extweaks
- Reboot phone
Swyped from my Samsung Galaxy SII
Running dorimanx kernel for a few hours now. Still got the feeling it discharges quick. Any other solutions? Ill keep you guys updated
Sent from my GT-I9100 using xda app-developers app
Hi all, I've some problems with my undervolted S3 (but same issues has my brother with his undervolted Note 2).
If I undervolt my phone (-25mV/-50mV/-75mV, ecc...all values are the same thing), lag problems appear with youtube app and also with other video, like flashplayer. Lag appears after about 10 minutes I'm watching some HD videos, and I must reboot S3 to solve the problem, infact change voltages to default values don't help.
I used apps like Voltage control or CPU tweaker, that allow to create different profiles whit different values, but when the lag appears, also if I select profile with default values the problem remains until i reboot...
How do you solve this problem? If you undervolted your phones, how you solve the lag problem? Thx for replies
There is an old saying back in my question.
Literally translation: if you want your horse to run, you have to feed it first.
Did you try other kernel?
Sent from my GT-I9300 using xda premium
Next time, post your problems in Q&A section for more help.
This time, try different kernel or don't use UV as is not much point anyway...
Sent from my GT-I9305 using xda app-developers app
R: (Q) Undervolt and lag, how to solve it?
qtwrk said:
There is an old saying back in my question.
Literally translation: if you want your horse to run, you have to feed it first.
Did you try other kernel?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Already tried
So, I think there's no solutions for lag when phone is undervolted, but is strange that lag persists when I come back at default profile.
djembey said:
Next time, post your problems in Q&A section for more help.
This time, try different kernel or don't use UV as is not much point anyway...
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Sorry for mistake
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Kikorin said:
Already tried
So, I think there's no solutions for lag when phone is undervolted, but is strange that lag persists when I come back at default profile.
Sorry for mistake
Click to expand...
Click to collapse
OK... as far as we know, every phone has its own tolerable voltage... You said even default voltage causes lag as well, may be you should overvoltage to see if you can get it stable?
Maybe it's related with ROM?
Sent from my GT-I9300 using xda premium
R: (Q) Undervolt and lag, how to solve it?
qtwrk said:
OK... as far as we know, every phone has its own tolerable voltage... You said even default voltage causes lag as well, may be you should overvoltage to see if you can get it stable?
Maybe it's related with ROM?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I haven't tried overvolt, but is possible that default values I see when open for the first time Stweaks or Set CPU aren't right for my phone?
My rom is Foxhound with siyah kernel.
Kikorin said:
I haven't tried overvolt, but is possible that default values I see when open for the first time Stweaks or Set CPU aren't right for my phone?
My rom is Foxhound with siyah kernel.
Click to expand...
Click to collapse
I would suggest you try stock ROM and stock kernel first, if it's all OK with stock, then first try other kernel, if using other kernel still OK, then perhaps it could ROM problem, anyway, you have to slowly determine where or what part went wrong and cause lag
Sent from my GT-I9300 using xda premium
I already posted this on the Rootbox rom thread, but I know not everyone reads the whole thread so it might save a bunch of people from asking the same question on different threads over and over again. I have tried out a few 4.2.2 roms and they would always reboot randomly, I used the 4Aces kernel and the Uber kernel and got the same results, constant random reboots. I fixed the problem by turning off CPU profiles. I use SETCPU to overclock, but I assume this is a kernel problem that would happen no matter which app you use to overclock. Hope this helps others!
Just to clarify, I'm still overclocking my device I've just turned off the CPU profiles.
Thanks a lot Porkenhimer, Will try this fix asap.
where is cpu profiles?
thanks, hope this somehow works
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Nice. Thanks
I went to check the profile but it was already disabled do I have to worry about it?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
cgibsong002 said:
where is cpu profiles?
thanks, hope this somehow works
Click to expand...
Click to collapse
Soo, yeah, OP, what exactly are "CPU Profiles". Is this some app? Or is it the setting like in SetCPU that lets you change profiles around in sleep, wake etc?
I don't see it on SetCPU.. Under the Profiles tab, the "Enable Profiles" is not checked. Never has been . I still get the occasional reboot but its somewhat rare at this point. Nothing to concern myself with
Sent from my SAMSUNG-SGH-I717 using xda premium
Many things happen that cause reboots... Set cpu profiles may be a problem with certain rom and kernel combos but is not a problem for others...specify which rom and kernel combos your using
shayneflashindaily said:
Many things happen that cause reboots... Set cpu profiles may be a problem with certain rom and kernel combos but is not a problem for others...specify which rom and kernel combos your using
Click to expand...
Click to collapse
Did an experiment yesterday and today, I ran 5 random 4.2.2 ROMs each for two hours, 1 hour with no CPU profiles setup and 1 hour with CPU profiles setup and enabled. I used the 4Aces kernel for each test. I also used a different profile setup for each ROM. I did a full wipe before installing each ROM. The ROMs I used were PAC-Man, Alliance, Rootbox, ReVolt & Jellybeer. I did not install any apps except for SETCPU. I had a total of one reboot with CPU profiles turned off, which was with the PAC-Man rom, and the least amount of reboot I had was with Rootbox, which was 3 reboots in one hour with CPU profiles enabled. Its pretty clear to me that enabling CPU profiles at least with the 4Aces kernel, will cause reboots. I had used both both the 4Aces and Uber kernals before doing this test and got reboots on every 4.2.2 rom I tried so I'm guessing if I did the same exact test with the Uber kernel I would get the same results. I'm not saying that other things are not also causing reboots, but its clear to me that something bad is happening when CPU profiles are enabled.
khaytsus said:
Soo, yeah, OP, what exactly are "CPU Profiles". Is this some app? Or is it the setting like in SetCPU that lets you change profiles around in sleep, wake etc?
Click to expand...
Click to collapse
Yes its the tab that says profiles in SETCPU.
Well you must have had a borinnnnng day haha. ... And your eyes must hurt for waiting on reboot.... I run 4/20 rootbox with profiles set for screen on 192/1242 WHEATLEY and screen off 192/972 powersave...4aces kernel. Only had one reboot and it was my daily driver for over a month. ...also the new base changes and merges may be messing with profiles set for set cpu in the newer 4.2.2 builds of roms and kernels. Cool to see someone giving that much time in a day to watch for reboots. Keep visine handy ...hope you figure out more
---------- Post added at 03:35 AM ---------- Previous post was at 03:33 AM ----------
And actually run a logcat of it re booting with profiles and we will have some answers to what is causing the issue
porkenhimer said:
Yes its the tab that says profiles in SETCPU.
Click to expand...
Click to collapse
This is the big miraculous fix?? Meh.
I fix all my Reboot issues by flashing a 4.1.2 aosp Rom with all of I717 JB source.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ltilt2 said:
I fix all my Reboot issues by flashing a 4.1.2 aosp Rom with all of I717 JB source.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Which Rom?
rogsoccerman said:
Which Rom?
Click to expand...
Click to collapse
Custom, made for me.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
rogsoccerman said:
Which Rom?
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ltilt2 said:
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Well xda is the place of sharing.
Ltilt. Pm.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I've heard good things about stability with uber kernel + beanstalk rom
porkenhimer said:
I already posted this on the Rootbox rom thread, but I know not everyone reads the whole thread so it might save a bunch of people from asking the same question on different threads over and over again. I have tried out a few 4.2.2 roms and they would always reboot randomly, I used the 4Aces kernel and the Uber kernel and got the same results, constant random reboots. I fixed the problem by turning off CPU profiles. I use SETCPU to overclock, but I assume this is a kernel problem that would happen no matter which app you use to overclock. Hope this helps others!
Just to clarify, I'm still overclocking my device I've just turned off the CPU profiles.
Click to expand...
Click to collapse
Heres a fix...........dont flash 4.2
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Lol there won't be a fix ... some 4.2.2 its pretty stable though imo
••••changes with every flash••••