Related
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
New Link
http://www.droidrzr.com/index.php/topic/2248-droid-razr-utility-16-contains-612181-fastboot-files/
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Great Job! Only wish that I knew about this 3 weeks ago! I took the back off and ended up glueing it back on and did a warranty exchange. I hope they don't say anything!!!
Again Great Job!!!!
Sent from my DROID RAZR using xda premium
pedrotorresfilho said:
This really works for corrupted systems after a flash failure without a working fastboot?
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
As long as once it is plugged in and the screen comes up in the AP Fastboot it will work. Just hold power plues volume up and down then once that turns off immediatley press the volume up and down and it will boot you right to the boot menu. But just wondering what shows up for you if it is not the fastboot?
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
exactly. for those that got cut off as the phone was in the process of flashing, i dont think it will boot to any phone charging icon because there's no software on the device. I've been trying for a week now
vel0city said:
Hey guys, I recently found an alternative way to fix the low battery problem when your in AP Fastboot and able to get it to charge without the soldering of usb cable or the factory cable. So for those who do not want to open up their razrs or pay 40 bucks for a cable use my method.
-Make sure you have the charging cable connected to the phone and the cable to an outlet not an computer.
-While in the ap fastboot screen with the low battery problem, just push & hold Vol - and Vol+ and power buttons at the same time for 10 seconds
-Then IMMEDIATELY press and hold Vol - and Vol+ for 10 seconds to get back to the boot menu.
-Then once in the boot menu go down the the one option that has the word tools on it which is the last one.
-If it does not do anything just press volume up or down and go back to the tools and click power (enter) again.
-Then you should be boot to the M logo.
-Then after a bit you will be presented to an battery icon charging your phone!
-After a good charge up to 50% or so download the program called
Droid RAZR Utility I can't post the link but it is in our forums so just search for it. If pm and I will give you the Link.
-Download that program and make sure your phone is back in AP fastboot and your battery should say OK meaning you can now program again.
-From there run the Droid RAZR Utility you just download it and choose option 1 and let it do its thing.
-Once done you should have the original stock rom and if you had root you must re-root it.
-Please message back for any questions! I am happy to help because I know how frustrating this is!
Click to expand...
Click to collapse
dude your a life saver! thank you!!!
solution
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
mestisso79 said:
I tried to do so but did not work I tried to boot straight to the battery also did not work had to own a cable faser
Click to expand...
Click to collapse
did you try the above tutorial? worked fine for me a couple hours ago
jaredakelly said:
did you try the above tutorial? worked fine for me a couple hours ago
Click to expand...
Click to collapse
Definitely didn't work. When that m logo comes up, it disappears and the screen goes off. The charging icon does not show.
Sorry for the late reply but it is good to hear this method to work for jaredakelly . For those who are having problems did you have the phone charging in the wall outlet and not on a computer usb? The best steps is to choose the the tools option then just let the phone boot to the m logo then just leave it there on the wall outlet. Make sure you are using the Motorola usb cable that came with your phone and its usb adaptor that might make a difference.
I just tried this tut and it works as far as I can tell I am at the screen for battery charging but there is a big "?" in the center, the phone doesnt know what level its at lol..
I suggest you space out and make your original steps in bigger and bolder text for the specific buttons because I almost missed the power + vol down + vol up and was just pressing the volume buttons
This thread should be stickied!
Yeah sorry if my instructions were not to clear this is my first time posting anything like this on this site, but I am glad to hear it is working for you too. I don't even have this phone lol , it was my friend's and he had it stuck on the fastboot so I messed around with it and in the end this was the result.
yep
i think my battery is too low to attempt this i got it on 3 times and tried to fastboot restore but battery kept dying before completion so i guess im just screwed
no you should be fine because as long as the power cable is still plugged in it should work regardless of the low battery level. I did this on my friend's phone with 0% battery.
renx0 said:
I can't get it to work, after I select BP Tools, it flashes the Motorola Logo and goes back to the AP Fastboot screen again. I don't think it works if you formatted \System.
Click to expand...
Click to collapse
I have the same problem :/
This method worked for me! Your are the MAN OP!
Sent from my DROID RAZR using XDA
I think this should be stickied
Sent from my DROID RAZR using XDA
Well this got on xda front page
Sent from my DROID RAZR using XDA
Not a very good success rate for being on the front page. I'm going to try it later, though I think that I tried something like this before and it didn't work. I know that I have read this somewhere else.
Hello, I am new to this forum.
I will try to explain the best that I can about how I got into this situation.
I was previously running on ICS 4.0.4(don't really know if it is .211 or .214 or something.). I tried to root it using Matt's Droid Razr Utility 1.7. I didn't really know what to do and was stupid enough to follow the video in the help thread(which was for upgrading from GB rather than rooting an ICS). Then I panicked.
I used option 1, followed by option 9, followed by option 3, followed by option 2, and then all four in random orders. Later on, I realized that I had to recover from the .211 file in the sd card after option 1(failure on my part). However, now whenever I try to enter recovery, I get Invalid Flash Mode Boot failure, whereas a normal boot will give me Invalid Flash Mode Flash failure.
I tried to use ADB tools and it didn't work.
Then I tried Utility 1.81. My driver is the same as the one provided, and the cable is the one that came along with the charger and phone.
My phone carrier is Singtel.
Any way out of this? Thanks in advance.
is it possible to enter fastboot ??
if so try to grab an image in development section wich you can place on your phone with RSD lite.
misterx11 said:
is it possible to enter fastboot ??
if so try to grab an image in development section wich you can place on your phone with RSD lite.
Click to expand...
Click to collapse
I can enter fastboot, and only fastboot. Attempting to enter any BP or recovery will result in the failures.
I just downloaded a stock rom for my phone. I'll see how it turns out.
Thank you for your time.
im in a similar situation, my phone is bricked, how do u enter fastboot? and where can i get a rom to use in rsd lite?
rageofshadow said:
I can enter fastboot, and only fastboot. Attempting to enter any BP or recovery will result in the failures.
I just downloaded a stock rom for my phone. I'll see how it turns out.
Thank you for your time.
Click to expand...
Click to collapse
chip0 said:
im in a similar situation, my phone is bricked, how do u enter fastboot? and where can i get a rom to use in rsd lite?
Click to expand...
Click to collapse
Do yall have XT910 or XT912 i.e. GSM or CDMA...
circleofomega said:
Do yall have XT910 or XT912 i.e. GSM or CDMA...
Click to expand...
Click to collapse
Since the thread name is Droid razr i think it is xt912
Go fast boot (power off your phone[if you cant then push and hold vol down+vol up and power button the same time, when you see your display flashed quickly release all buttons and press them again and hold- you should get boot menu and then use vol down to get on AP fastboot and use vol up to select it]).
Then use rsd lite and FXZ files to get your phone running, no need for any kind of wipe after this. Wait until rsd lite says finished.
What fxz files do I use? I've tried like 3 different ones and they always fail
Sent from my DROID RAZR using xda app-developers app
Hello,
I've searched for help on this and can't seem to find any.
Problem: Motorola Razr is stuck on the red m logo, but I cannot boot into the boot menu to flash via RSD or anything. The logo is offset to the left a little and has a small 1-2 pixel high rainbow of colors across the bottom. When trying to boot into the menu with power and vol + & - it simply boots without a logo but still the small bar of colors.
Probable cause: Phone's screen wasn't turning on and the phone wouldn't turn off so I did the reset with vol up and power while the phone was still probably on. Before when my phone's button wasn't responsive i used that to reset it and it had worked.
Info on phone and rom:
Rom - Rage rom 2.2 upgraded from 2.1 (worked for the past two months fine)
Phones base version: 98.72.16 (the april JB release) flashed via droid razr utility
Safestrap version 3.11
What I've tried: was going to try rsd flashing but i can't reach the boot menu.
Basic summary: Stuck on M logo and can't get into boot menu or safestrap, after holding vol up + power while phone was on.
Going into the boit manager and flashing via rsd lite both are different .
For flashing via rsd lite ya need to switch off ya mobile and then press both volume down and volume up at same time and press power button then.
It ll take ya into the bootloader and then using power down come till 3rd option ap fastboot and then press power up to select that now connect ya phone to pc and then flash the fastboot using rsd lite
Edit : make sure ya have installed appropriate drivers to get recognise ya phone by rsd lite
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
I think i have the same problem
I had MIUI on my Razr and today i wanted to try CyanogenMod, so i downlaoded it and installed it with ClockWorkMod, then rebooted and struck in the big red M, and no way to access the boot manger because if i press volume up + volume down + power it reboot, show the big red M then black sceen, and if it's conneced to my pc it tryes to install some drivers bit it fail, but still black screen
Is it bricked? What can i do?
morphalex90 said:
I think i have the same problem
I had MIUI on my Razr and today i wanted to try CyanogenMod, so i downlaoded it and installed it with ClockWorkMod, then rebooted and struck in the big red M, and no way to access the boot manger because if i press volume up + volume down + power it reboot, show the big red M then black sceen, and if it's conneced to my pc it tryes to install some drivers bit it fail, but still black screen
Is it bricked? What can i do?
Click to expand...
Click to collapse
Ya can't use boot manager and cwm recovery both . If ya want to use cwm ya need to remove all the files of bmm . Its just soft bricked not hard bricked so no need to worry just flash the appropriate fastboot file using rsd lite to get back to stock
Thats it
Edit : i think ya know the flashing method
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
Ya can't use boot manager and cwm recovery both . If ya want to use cwm ya need to remove all the files of bmm . Its just soft bricked not hard bricked so no need to worry just flash the appropriate fastboot file using rsd lite to get back to stock
Thats it
Edit : i think ya know the flashing method
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
Thanks for trying but I tried following your instructions to get into fast boot and the screen just goes dark. Also when plugging into my PC it pops up on windows' end saying that a USB device has malfunctioned. I think I may just get it replaced under warranty unless sometime soon I find out theres a new way to fix it. But yeah it seems its too hard to tell if I'm actually in fastboot or if its even getting there properly.
Thanks!
As far as i know ya have tried all the unbrick method , none of them seemed to work . I believe ya razr is not soft or hard bricked and its not software problem too . Its hardware problem ya need to take it to service centre because it may be LED problem
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
How I fixed my Motorola Razr i (Intel)
Hello guys,
Since my Motorola Razr i phone is a company phone where I receive my corporate emails, I wasn't allowed to root the phone whatsoever.
My phone got stuck on the Red Motorola logo under normal usage. One day I turned it off and when I turned it back on, I had this problem.
How I solved it:
1) Downloaded and installed RSD Lite 6.1.4 which worked on Windows 8.1. Ensure all drivers are installed and that nothing is undetected in Device Manager. #important
2) I am based in Germany and I had the Vodafone Retail (EU) version. So I downloaded "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip" from http://sbf.droid-developers.org/phone.php?device=13. This corresponds to Android 4.1.2 Retail Europe.
3) I booted the phone in Fastboot (Power + Vol down; after restart and little vibrate, release power, keep finger on Vol down.)
4) The phone was detected in RSD Lite. I chose the zip file, unpacked and flashed.
5) Done. Phone was fresh. No warranty was void, nothing was rooted. All good.
Hope that helps somebody out there!
Cheers,
Shailen.
I've got the same issue. Took the OTA (was on stock OTA, rooted). Not, nothing but moto-logo with the only working option being AP Fastboot. Tried script utility to bring back to 4.1.2, but it fails on writing system and boot (preflash validation failed FAILED (remote failure)).
Is there another way to get the stock images flashed on there?
---------- Post added at 10:09 PM ---------- Previous post was at 09:36 PM ----------
crazifuzzy said:
I've got the same issue. Took the OTA (was on stock OTA, rooted). Not, nothing but moto-logo with the only working option being AP Fastboot. Tried script utility to bring back to 4.1.2, but it fails on writing system and boot (preflash validation failed FAILED (remote failure)).
Is there another way to get the stock images flashed on there?
Click to expand...
Click to collapse
Well, with RSDLite 6.1.6 and the most recent build from droid-developers . org I'm back in operation. Old version, wiped out, but at least I can make/receive phone calls.
How I got my Razr HD (XT925) Working! Flashed It WITHOUT LOSE ANY FILES!
I know this is a old thread, but if some one else falls here just like me, I had a problem with my XT925 too, and figured out that my only choice was to flash it up.
My phone was stuck in the red motorola logo, and it doesn't even tried to load the android.
After reading a lot of information and tried EVERYTHING, I fall here, and the comment of @shailentj saved my phone!
So I basically followed the steps that @shailentj posted in this very thread, with some differences.
1 - His link goes directly to Motorola RAZR i (XT890), but if you access ' sbf.droid-developers.org ' (I can't post links yet) you will be able to find your own model, which in my case was Razr HD (XT925).
2 - Extracted the whole firmware package (.zip file) and edited the .xml file, removing the "getvar" line. If you don't know what or how to do this, is just remove the line where you find the text "getvar". If you have trouble, just google it, there is a lot of information.
And finally, the reason I'm here. I found a way to don't delete USER DATA! My phone stuck, and I did't have any backup of my contacts (that is a lot of numbers) nor my files (photos, movies).
So I start to read the .xml file, and find a step "userdata", with operation "erase". This line says to erase the user's data partition, and in most cases, we don't want that.
Then, just remove the line in the xml written: " <step operation="erase" partition="userdata"/> ", and your files (may) not be erased!
4 - I start to flash, and then I got the infamous message "sistem_signature" failed. The solution was just download the last RSD I found (which in my case was 6.1.6).
5 - My phone restarts, with everything working great, system restored and ALL MY FILES AND CONTACT NUMBERS were there!
So very thank you @shailentj, your post really helped me a lot!
And yeah, you can flash your phone without lose any contacts or photos!
Now go, and spread the word!
pls i need a direct link to download the fastboot files for my droid razr xt912 verizon
my phone is brick and need to restore
da_proman said:
pls i need a direct link to download the fastboot files for my droid razr xt912 verizon
my phone is brick and need to restore
Click to expand...
Click to collapse
http://sbf.droid-developers.org/phone.php?device=9
Sent from my Razr XT910
I need help. My Droid Razr M (XT907) has the red circle and M logo and frozen screen. Can not find anyone who will attempt to flash the phone, like in the method that vitox32 posted about. Like most I have alot of information that I do not want to loose. Can anyone help????
purdy64 said:
I need help. My Droid Razr M (XT907) has the red circle and M logo and frozen screen. Can not find anyone who will attempt to flash the phone, like in the method that vitox32 posted about. Like most I have alot of information that I do not want to loose. Can anyone help????
Click to expand...
Click to collapse
try the correct forum
http://forum.xda-developers.com/droid-razr-m/help/qa-question-noob-friendly-t3142939
Sent from my XT1254 using XDA Labs
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
ejaybass said:
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
Click to expand...
Click to collapse
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Draxin said:
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Click to expand...
Click to collapse
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
ejaybass said:
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
Click to expand...
Click to collapse
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
welder73 said:
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
Click to expand...
Click to collapse
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
ejaybass said:
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
Click to expand...
Click to collapse
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
welder73 said:
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
Click to expand...
Click to collapse
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
ejaybass said:
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
Click to expand...
Click to collapse
How long are you holding them down.. it can take a good twenty-thirty seconds sometimes. Mine is also finicky if I don't press them all down at the exact same time, it wont let me in then either.
If your getting the boot logo it is just really hard to believe you dont have stock recovery... can the device charge? If you hook it to a computer do you get the white led?
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
https://www.youtube.com/watch?v=LA8og7sbtBY
To unbrick your phone...Don't worry... its not broke
hrishi21007 said:
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
To unbrick your phone...Don't worry... its not broke
Click to expand...
Click to collapse
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
ejaybass said:
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
Click to expand...
Click to collapse
Now I am facing an issue that's really annoying. I can get into recovery (AP Fastboot) if the phone is connected to a power source. As soon as I unplug it, the screen turns black! When I connect the phone to my computer, the LED goes white and I cannot access AP Fastboot....
When no cable is connected to the phone I cannot access any recovery mode.
What is wrong here? Even if I connect the phone to the power source only, it shows the red Motorola logo all the time. It seems as if I cannot turn it off. Is there also a trick how to really turn it off and let the phone charge??
As the title says:
My phone: Motorola Razr Maxx / xt910
I have used 3.65 but i decided to update to 3.73 along since i hopped to CM11 M9 from CM11 M7
This is where my problems started.
I made a new partition, and activated it as "active" one.
I installed CM11 M9 onto it, and google apps after that.
I booted to the new system and setup my apps and everything was fine, then i shut down the phone.
After i re-started the phone today it was stuck on motorola dual core technology logo. (which happens before safestrap).
And i managed to get into bootloader and deleted the CM11 M9 partition and switched back to stock rom as active one.
Then i attempted to re-create the partition and when it was doing the partition, the phone went off (still had 96% battery left).
After starting the phone up again, it's stuck on infinite boot loop, and flashes the green safestrap BIOS for half a second.
Is there any way i can fix my phone?
Try to flash it with RSD Lite, but its loss of data :/
Thank you for answering
archie1988 said:
Try to flash it with RSD Lite, but its loss of data :/
Click to expand...
Click to collapse
That is least of my worries And i got all data backed up pretty well
Is there any step by step tutorial for this?
stefeman said:
Thank you for answering
That is least of my worries And i got all data backed up pretty well
Is there any step by step tutorial for this?
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=2155576
And scroll to video named undbrick/restore/unroot via rsd lite.
On the first page [emoji6]
archie1988 said:
Go here: http://forum.xda-developers.com/showthread.php?t=2155576
And scroll to video named undbrick/restore/unroot via rsd lite.
On the first page [emoji6]
Click to expand...
Click to collapse
I can't even get to AP Fastboot.. the safestrap flashes upper area and ****s up before that
Enough with this ****.. I'll bring this **** to my ISP and pay something so they null it and re-install stock system..
Lesson of the day.. don't update safestrap lol
stefeman said:
I can't even get to AP Fastboot.. the safestrap flashes upper area and ****s up before that
Click to expand...
Click to collapse
Turn off the phone and while it's off press vol- vol+ and the power button at the same time.
If you do it right,you shouldn't see anything related to SS.
Sent from my Razr XT910
welder73 said:
Turn off the phone and while it's off press vol- vol+ and the power button at the same time.
If you do it right,you shouldn't see anything related to SS.
Sent from my Razr XT910
Click to expand...
Click to collapse
Done that multiple times and the screen just flashes on upper area of the screen and goes off..
I can't even power it on without plugging in a charger first.. If i unplug charger it flashes and goes off..
The battery is close to 96-98%
stefeman said:
Done that multiple times and the screen just flashes on upper area of the screen and goes off..
I can't even power it on without plugging in a charger first.. If i unplug charger it flashes and goes off..
The battery is close to 96-98%
Click to expand...
Click to collapse
What about the led light,is it white?
If it's white then your battery is too low,you must buy or make the factory cable to be able to flash the fastboot with Rsd lite.
Sent from my Razr XT910
welder73 said:
What about the led light,is it white?
If it's white then your battery is too low,you must buy or make the factory cable to be able to flash the fastboot with Rsd lite.
Sent from my Razr XT910
Click to expand...
Click to collapse
Led light is never shown.. =/