Hi all,
I just purchased a pretty cheap Xperia U off ebay, and upon unboxing I discovered that it does not respond to touch.
The touchscreen does not respond, the capacitive buttons above the light bar do not work.
I tried updating firmware using PC Companion, then uses SUS. Update worked fine but still stuck with same problem.
Device boots fine, but I cannot even unlock it. The power buttons, volume buttons work fine. What could be a possible cause with this?
Could it be that during transportation the touchscreen connector got loose?
Is it a software issue? What could be a possible way to perform a recovery?
Is it a hardware issue? Should I take it to a Sony repair center? Im pretty sure I dont have any warranty on this, its an imported fone.
Seems lik a hardware problem.. Take it to repair shop.
Sent from my LT22i using Tapatalk 2
Sounds to me like the digitzer possibly isn't working. AFAIK u have to replace the entire screen if so (I had the same problem on my mini pro).
Sent from my Nexus 7 using xda app-developers app
Take it to Sony service centre...
tarbyonline said:
Sounds to me like the digitzer possibly isn't working. AFAIK u have to replace the entire screen if so (I had the same problem on my mini pro).
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Following That problem is Digitzer?
But our country not has Sony Services center for Mobile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ST25i using xda premium
Now Soon I shoot my screen. I
Sent from my ST25i using xda premium
Related
Hi all,
Does any one know how i can port the stock keyboard from the S2 to the S3?
I've tried the AxT9IME and the deodexed version but neither work.
thanks
:laugh:
How is it different from s3?
Sent from my GT-I9300 using xda premium
with the S3, you have to open Settings to change T9 off, the S1 and S2 keybaord had the button at the bottom which is perfect. the layout of the keys on the S3 are not laid out very well.
This is the S3 T9 keyboard which is not nice to use
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i want my keyboard to be this.... the stock one from the S1 or S2
thanks
(sorry for the big pictures :-\ )
Yeah I agree I don't like the t9 keypad on s3 but would love the s2 one if this is rvrr possible
Sent from my GT-I9300 using xda premium
Well I remembered on s2 forum there was samsung keyboard released that worked everywhere... Even on cm9 so you could have a look there..
Sent from my GT-I9300 using xda premium
FOUND IT!!!!
Flash this .zip with CWM...
http://www.4shared.com/zip/C1JqAZsH/ICSamsungkeypad-by-awandroid.html?
the reason why the others apk's wouldn't work is they didn't have the framework, like this one.
SO SO HAPPY!!!!!
:good::laugh::laugh::good:
neilmc1983 said:
FOUND IT!!!!
Flash this .zip with CWM...
http://www.4shared.com/zip/C1JqAZsH/ICSamsungkeypad-by-awandroid.html?
the reason why the others apk's wouldn't work is they didn't have the framework, like this one.
SO SO HAPPY!!!!!
:good::laugh::laugh::good:
Click to expand...
Click to collapse
How did you found it? I searched also for you but never found it
Sent from my GT-I9300 using xda premium
norpan111 said:
How did you found it? I searched also for you but never found it
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
it as from awandroid89
here...http://forum.xda-developers.com/showpost.php?p=26950490&postcount=6
It also works for the S3
Im so happy
had to reflash Omega, the keyboard worked fine when typing but conflicted with contacts.
Contacts wouldn't open at all :-(
My phone is not charging properly!
The phone itself charge for a few percent and than after that it get very hot and it stop charging! Please help!
a bit more help needed what kernal and rom are you using
Sent from my GT-I9300 using xda app-developers app
NeatROM XWLPI & KernelXWLPI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sounds like that USB/charging circuitry issue we see all the time on here. Clean the usb port in the first instance; with a small dry brush/unused toothbrush, or with a q-tip/cotton bud with some isopropyl alcohol on it.
Might need a trip to Samsung/authorised repairer by the sound of it.
btw it works perfectly while it's off and charging, what's the cause ?
try changing kernal May solve it
Sent from my GT-I9300 using xda app-developers app
please stop saying clean USB jig with toothpick and brushes we are not stupid
Sent from my GT-I9100 using xda app-developers app
bennycop said:
please stop saying clean USB jig with toothpick and brushes we are not stupid
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No one was calling you stupid, but this can very easily be caused by a dirty usb port on the phone. Cleaning it may help.
No one said anything about a jig, though.
Sry man but this problem is pissing me of for a week now and I can find the solution and my phone is new only two months old I tried every thing but it's just don't work. Now I'm using root box rom 1.6 with fluxi kernel and xxtweeks so there's an option on xxtweeks>system>fuel gauge. I don't know what it means but I think that it has something to do with resetting the battery ,if someone knows more please tell us.Thx
Sent from my GT-I9100 using xda app-developers app
Hi Guys got new Atrix 4G ..phone works normally no problems with Touch screen functions normal but there are 2 problems that im facing
1)FingerPrint Scanner doesn't work Swipe too short error or doesn't detect at all.I don't need fingerprint anyway
2)Seems to be digitizer is loose ...even I press it will be popping up after few minutes...but touchscreen works normally no issue.
Please help me guys...
Sent from my DROID RAZR using xda app-developers app
I have exactly the same problem with a brand new Atrix coming from the seller "befine" on a famous auctions website. Fingerprint reader doesnt detect anything. I ordered a new reader module, opened a case on Paypal and asked the seller 28$ back to cover the cost of the new fingerprint reader. The seller accepted. Dont hesitate to do the same.
Just before I bought another new Atrix from a different seller on the same website and the ribbon flex cable from the volume butons was damaged (luckily I couldn't enter fastboot mode because of this defect so I quickly noticed it before unlocking bootlader and stuff), I had to send it back to Germany and get refund.
It looks like its rather tricky to buy a cheap "brand new" Atrix, please beware...
Thanks mate your reply where can i buy fingerprint?
Sent from my XT925 using xda app-developers app
L7iharsha said:
where can i buy fingerprint?
Click to expand...
Click to collapse
You are supposed to have been born with it...
They say human organ trading is popular in some countries but I don't think they sell fingerprints. You can ask though...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry dude I'm alien I dont have fingers.. I control objects through mind control...I don't have fingers...yes humans are born with fimgers but I didn't born with fingers...
Sent from my DROID RAZR using xda app-developers app
L7iharsha said:
Sorry dude I'm alien I dont have fingers.. I control objects through mind control...I don't have fingers...yes humans are born with fimgers but I didn't born with fingers...
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Lol
Sent from my MB860 using xda app-developers app
Hello everyone.
Now I have caused my mobile phone on the ground and I have broken screen, but I can touch control everything and the colors in which sound,only damage that I see is to break the screen. So what I'm doing, and that requires me how much it costs the price?
Thank you for all
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9300 using Tapatalk
Replace the glass.. Or glass & digitizer.. You can do it yourself or get it done in the service center.. Maximum cost should be somewhere around 100 usd
Sent from my GT-I9300 using Tapatalk
zoot1 said:
Replace the glass.. Or glass & digitizer.. You can do it yourself or get it done in the service center.. Maximum cost should be somewhere around 100 usd
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Edited:Thank you for Reply...
Sent from my GT-I9300 using Tapatalk
Yes I payed abouth the same sum of money
piemme22 said:
Yes I payed abouth the same sum of money
Click to expand...
Click to collapse
I did the same thing. Sold my S3 and I'm a little sorry I did. GG is a gimmick and any other glass will do just the same.
If you are replacing the screen, could you take pics step by step? Because my girlfriend has the same problem and I am going to fix her screen so this would be appreciated! Thanks in advance
Sent from my GT-I9300 using xda app-developers app
I can't take any pic because I got my phone to service center.
I'm sorry
Sent from my GT-I9300 using Tapatalk
Good luck!
Sent from my iPhone using Tapatalk
Search on youtube for broken glass replacement for s3 you will find lots of videos. also check ifixit.com
I replaced just glass of my s3 and it cost me just $15
It cost me $70
Sent from my GT-I9300 using Tapatalk
On the xperia z ultra, Sony's version and gpe version, is the power button flatter on this phone than on other xperia phone models? And when I say flatter I mean does the bump protrude a lot like the other models.
Sent from my C6806_GPe using XDA Free mobile app
Yeah, it looks like the Ultra's button is a little flatter, so it doesn't stick out as much. Can't tell if this is a negative in your eyes, or?
Sent from my Z Ultra
Thankyou for responding. but no it isn't I just got mine and I wanted to make sure I didn't pay for a defective device. I had the Z and that button stuck out far..but yea just wanted to know..I really appreciate it.
One more question, is the button also softer to press??..I'm just making sure before my warranty runs out.
Sent from my C6806_GPe using XDA Free mobile app
remix435 said:
Thankyou for responding. but no it isn't I just got mine and I wanted to make sure I didn't pay for a defective device. I had the Z and that button stuck out far..but yea just wanted to know..I really appreciate it.
One more question, is the button also softer to press??..I'm just making sure before my warranty runs out.
Sent from my C6806_GPe using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, the button is like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
... and i guess it's a little softer to press than the Z. Mine's not that hard, but it's a little on the soft side
It's softer and does not protrude. To put it simply "you cannot feel it". Blends with the design
Sent from my C6802 using XDA Premium 4 mobile app