[HELP] My XPS NOT WAKING UP !!!!!! - Sony Xperia P, U, Sola, Go

Hello Guys
Yesterday My phone was doing just fine but suddenly this morning when i wake up, when i push the power button the screen is not turned on (still Black) my first thought is the battery is dead but when i plug it in the red LED shows up but the screen is still off i waited it for an hour but nothing happened :crying::crying::crying:
i've already tried to hard reset with presseing VOL UP and Power but still Nothing Happened ??
When i Plugged it into the computer the phone is not detected but it still charging (Red LED)
Can Anybody HELP ME :crying:
Thanks Before

you can try this:
power + volume up wait till vibrates three times.
then plug your phone with charger then wait one hour again.
or
connect your phone via fastboot then reinstall your kernel or flash stock kernel via flashtool.
or worst case
reflash stock rom in fastmode via flashtool.
if your pc have the driver installed your phone will be detected again if using fastboot or flashtool.

mharckk said:
you can try this:
power + volume up wait till vibrates three times.
then plug your phone with charger then wait one hour again.
or
connect your phone via fastboot then reinstall your kernel or flash stock kernel via flashtool.
or worst case
reflash stock rom in fastmode via flashtool.
if your pc have the driver installed your phone will be detected again if using fastboot or flashtool.
Click to expand...
Click to collapse
I Pressed Vol Up And Power For Almost 10 Mins And Nothing Happened :crying:

it will vibrates three times then charged it after that power it on.
if nothing happens, you need to reflash stock kernel via flashtool.
or try this:
http://forum.xda-developers.com/showthread.php?p=26485110#post26485110/post#4
its my post #4

Theonlyzii said:
Hello Guys
Yesterday My phone was doing just fine but suddenly this morning when i wake up, when i push the power button the screen is not turned on (still Black) my first thought is the battery is dead but when i plug it in the red LED shows up but the screen is still off i waited it for an hour but nothing happened :crying::crying::crying:
i've already tried to hard reset with presseing VOL UP and Power but still Nothing Happened ??
When i Plugged it into the computer the phone is not detected but it still charging (Red LED)
Can Anybody HELP ME :crying:
Thanks Before
Click to expand...
Click to collapse
Just charge your phone longer (2-3 hours should be fine). When the phone has no battery at all, it won't turn on unless you charge it for some time.

pcmapas37 said:
Just charge your phone longer (2-3 hours should be fine). When the phone has no battery at all, it won't turn on unless you charge it for some time.
Click to expand...
Click to collapse
Ok
I will report back in the next 2-3 hour
Sent from my LT26i using xda premium

mharckk said:
it will vibrates three times then charged it after that power it on.
if nothing happens, you need to reflash stock kernel via flashtool.
or try this:
http://forum.xda-developers.com/showthread.php?p=26485110#post26485110/post#4
its my post #4
Click to expand...
Click to collapse
I pressed it like almost 10 mins dude
No vibration at all
Sent from my LT26i using xda premium

hmmm... strange.. have u tried removing the micro sim then power it on?

Can you hold volume down while plugging it into your pc to get flash mode?
Sent from my LT26i using Tapatalk 2

mharckk said:
hmmm... strange.. have u tried removing the micro sim then power it on?
Click to expand...
Click to collapse
No i havent
Will test it today
Sent from my LT26i using xda premium

Ben36 said:
Can you hold volume down while plugging it into your pc to get flash mode?
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
I tried that but the led turns RED
(No flashmode)
Sent from my LT26i using xda premium

Related

HELP! URGENT Flashed HTC wildfire rom and cant boot into xrecov.

I flashed the x10 wildfire HTC port onto my mini just to screw around but when i rebooted and tried to go into xrecovery it didnt work. I tried doing it via x10 flasher and that didnt work also. is there any way of getting this thing back into xrecovery? I have nandroid backups i can refer back to
You will need to reflash your device using SEUS.
Sent from my U20i using XDA Premium App
nujhum said:
You will need to reflash your device using SEUS.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
....,then install xrecovery again and then restore your backups.
Thx a lot worked like a charm
Sent from my Dell Streak using XDA App
Another method, you can just hard reset.
When you open the back plate, There's should be a small button next to the camera. You'll need something small to press the button, around 10sec. That should do the hard reset.
Sent from my U20i using XDA Premium App
nujhum said:
You will need to reflash your device using SEUS.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
I do the same as flashing with wildfire rom for my x10 mini, so now my phone wont start, nothing hapend when i try to turn it on, i also charge it with my wall charge and with my usb port on my pc, it turned on by its self and stuck at sonyericson logo. and then, I try to charge the battery for hours and then take out of the battery for 5minutes and then plug it in, after that try to get flash mode but it cant go in to flash mode, so anybody help me?
dtbang721 said:
I do the same as flashing with wildfire rom for my x10 mini, so now my phone wont start, nothing hapend when i try to turn it on, i also charge it with my wall charge and with my usb port on my pc, it turned on by its self and stuck at sonyericson logo. and then, I try to charge the battery for hours and then take out of the battery for 5minutes and then plug it in, after that try to get flash mode but it cant go in to flash mode, so anybody help me?
Click to expand...
Click to collapse
OK
put out the battery
plug in the usb in your PC and phone when SEUS ask for your device
press the back button and put the battery back in your phone
and......................FLASHMODUS
dtbang721 said:
I do the same as flashing with wildfire rom for my x10 mini, so now my phone wont start, nothing hapend when i try to turn it on, i also charge it with my wall charge and with my usb port on my pc, it turned on by its self and stuck at sonyericson logo. and then, I try to charge the battery for hours and then take out of the battery for 5minutes and then plug it in, after that try to get flash mode but it cant go in to flash mode, so anybody help me?
Click to expand...
Click to collapse
im not sure about mini course i own a mini pro...
since mini doesn't have battery, so it will automatically turn off even after your turn it of.
so, okay. im not sure, but open the back plate of your mini, look near the camera, there's should be a small white button, i think its for hard reset.
try pressing it and hold for 5-10seconds. see if it works for you..
flex96 said:
OK
put out the battery
plug in the usb in your PC and phone when SEUS ask for your device
press the back button and put the battery back in your phone
and......................FLASHMODUS
Click to expand...
Click to collapse
lol, there's no battery for mini, there's only build in battery for mini. so that would be impossible.... D
nujhum said:
lol, there's no battery for mini, there's only build in battery for mini. so that would be impossible.... D
Click to expand...
Click to collapse
I've got tools to take out the x10 mini battery, it isnt difficult for me.
I've tried the guide of seus program (turn off for minutes, plug the usb cable to pc, hold the back button, plug usb cable to the phone) but there is no thing happened affter I hold the back button and plug usb cable to the phone, no green led indicate thats flash mode. im sure that the battery is full because i charge it for hours with my wall charger. and the battery has out for minutes before i tried to flash mode.
dtbang721 said:
I've got tools to take out the x10 mini battery, it isnt difficult for me.
I've tried the guide of seus program (turn off for minutes, plug the usb cable to pc, hold the back button, plug usb cable to the phone) but there is no thing happened affter I hold the back button and plug usb cable to the phone, no green led indicate thats flash mode. im sure that the battery is full because i charge it for hours with my wall charger. and the battery has out for minutes before i tried to flash mode.
Click to expand...
Click to collapse
Seus always work to me when I bricked my phone or loop boot at sony ericsson logo.
You sure you did follow the instruction step by step?
Sent from my U20i using XDA Premium App
nujhum said:
Seus always work to me when I bricked my phone or loop boot at sony ericsson logo.
You sure you did follow the instruction step by step?
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Could you please tell me how to do it step by steps? The SEUS doent work for me in my case. All I do is:
1- Charge the phone for hours to full up the battery
2- Take out the x10 mini battery so the phone is surely turn off for minutes
3- Plug the battery in.
4- Plug the cable (come with the phone - sonyericson cable)
5- Hold the back button on my phone
6- Plug the cable to my phone while the back button still pressed
7- Affter five minutes. No thing happened, the green led not appear, the phone only has red blink.
all I can do is charge the phone and see that it automatic turn on and stuck at sonyericson logo.
dtbang721 said:
Could you please tell me how to do it step by steps? The SEUS doent work for me in my case. All I do is:
1- Charge the phone for hours to full up the battery
2- Take out the x10 mini battery so the phone is surely turn off for minutes
3- Plug the battery in.
4- Plug the cable (come with the phone - sonyericson cable)
5- Hold the back button on my phone
6- Plug the cable to my phone while the back button still pressed
7- Affter five minutes. No thing happened, the green led not appear, the phone only has red blink.
all I can do is charge the phone and see that it automatic turn on and stuck at sonyericson logo.
Click to expand...
Click to collapse
i see.
just maybe.
2- Take out the x10 mini battery so the phone is surely turn off for minutes
(do not plug in the battery yet)
4- Plug the cable to pc
(you need to do step 5 & 6 as fast as you can so your phone wont switch on)
5- insert the battery,
6- press and hold back button, plugin usb. that should work.
May be the battery isnt enought to begin flash mode because when I hold power button there is nothing happend, im not sure that battery could be charge when I conect to charger. when I conect to charge, the red light blink, affter about five minutes the phone turn it self on and stuck at sonyericson logo. So there is no red blink more, only the logo. So in this case I think that affter charge 5 minutes the phone turn on and no charge any more, and 5 minutes charging is not enough for flash mode. But I have no way for charging my phone.
dtbang721 said:
May be the battery isnt enought to begin flash mode because when I hold power button there is nothing happend, im not sure that battery could be charge when I conect to charger. when I conect to charge, the red light blink, affter about five minutes the phone turn it self on and stuck at sonyericson logo. So there is no red blink more, only the logo. So in this case I think that affter charge 5 minutes the phone turn on and no charge any more, and 5 minutes charging is not enough for flash mode. But I have no way for charging my phone.
Click to expand...
Click to collapse
have you try pressing the hard reset button at the back of the phone?
it should be around next to the camera, white button and very small. need to plress it with pin anything smaller.
If I'm not mistaken, mini does not have hard reset button. Try to find some pictures of disassembled mini and you'll find out that its not a button at all.
The only way to perform hard reset on mini is to hold down both power and Home keys.
Sent from my U20i using XDA App
sur1k said:
If I'm not mistaken, mini does not have hard reset button. Try to find some pictures of disassembled mini and you'll find out that its not a button at all.
The only way to perform hard reset on mini is to hold down both power and Home keys.
Sent from my U20i using XDA App
Click to expand...
Click to collapse
my bad. LOL i thought its the same with mini pro. (i own a mini pro.)
So may be affter my phone crashed. It cant charge as normal. It can only charge in about 5 minute and turn on by it self and stop charging. I wonder how to charge it before flashing?
dtbang721 said:
So may be affter my phone crashed. It cant charge as normal. It can only charge in about 5 minute and turn on by it self and stop charging. I wonder how to charge it before flashing?
Click to expand...
Click to collapse
using external charger i think.
i faced a similar issue once.
battery discharged and phone bricked. i then connected my phone to the usb with the laptop. phone was looking dead but it did charge and turned on, and i kept it that way for 5 to 10 mins, and then flashed it, it hardly takes 3 - 4 mins to flash...
and then i kept it to be charged again
Sent from my U20i using XDA Premium App

[Q] Big problem with x10a

Hi, I'm new at the forum and have read some threads about problems on x10.
My phone is a x10a, with Gingerbread version installed via Flashtool long ago, I bought the phone +/- 2 years ago.
Well, last night I installed 2 apps, 1 for wallpapers and the other one was Go Launcher.
Till that ok, everything running, but then I decided to restart my phone cuz it was on for several days. The problem started there, I couldn't turn it on again after I turned it off.
So today I searched a little for problems like these, tried to flash my device, but it turns the green light on for a few seconds then it goes off, and my device is disconnected from the Flashtool. Tried to charge my battery for like 30 minutes, tried taking out the microSD, tried turn on holding volume and power button together, tried turning on without the battery (connected to the charger), but still stuck.
If anybody pleeeease can help me I would be REALLY glad!!!
Thanks in advance
Well in some cases it works, so try to remove battery hold back button, plug your USB cable and insert the battery. It should connect in flashmode. Then flash official ROM and it should start. At least I hope so.
TnT84 said:
Well in some cases it works, so try to remove battery hold back button, plug your USB cable and insert the battery. It should connect in flashmode. Then flash official ROM and it should start. At least I hope so.
Click to expand...
Click to collapse
Tried but as I haven't turned on USB Debugging I'm not able to flash my phone. Thank you
maahsky said:
Tried but as I haven't turned on USB Debugging I'm not able to flash my phone. Thank you
Click to expand...
Click to collapse
Repair using pc companion?
Sent from my X10 using xda premium
epulrevo said:
Repair using pc companion?
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Didn't work too =/
Thank you guys, I gave up and taken the phone to a technician
Take care
I do have the x10a with the same problem. Lot of users will recommend pc companion method but the problem is that the device is not recognized by the computer/other OS.
I bought the Galaxy S3 instead
Sent from my SGH-I747M using xda premium
I am facing the same problem. I think it might be the battery !! Try starting with a different battery.

[Q] Bricked Xperia Go

Somehow I managed to brick my Xperia Go. My conclusion from similar posts is that the battery is completely drained. Yesterday evening when it happened, it at least vibrated when I attempted to switch on. If I tried to hold power and volume up buttons, it vibrated once at first and then after some time three times. Now (after being connected to the charger about 12 hours) it doesn't do even that. It switches on red led if connected to the charger and led switches off after some minutes. That's all. I'll try different charger and looking at options for servicing and so on, but more important for me is to understand why it happened.
The phone was charged more than 50% and FXP235 CM10 was installed. I updated it to the custom compiled CyanogenMod 10. It was fresh CyanogenMod 10 checkout (jellybean branch) with bunch of UI (strings) resources replaced and it was the first CM10 compile made. I've used CM9 in the past though and compiling CM10.1 for my Nexus devices every day. The fresh update was compiled on MacOSX 10.8 and some small fixes were made to compile it there. The only change relevant to lower levels than an UI was a small change to fix crosscompiling on Mac. After updating normally from bootloader, I rebooted the phone and it didn't switch on any more. The question is - why it happened? Is there any reasonable explanation how an update can cause it? Are there things I should look at? And so on ...
Hard reboot the phone
Flash tool
Flash mode on phone vol + when plug USB in
Reflash stock ftf with flash tool
U may have downloaded the wrong files and buggered up your kernel
Sent from my Xperia Go using xda app-developers app
nosmaster said:
Hard reboot the phone
Click to expand...
Click to collapse
I can't reboot anything, doesn't matter softly or hardly . My guess is that battery is so drained that it doesn't even begin a charging. I guess that my only hope is to try to charge battery directly.
nosmaster said:
U may have downloaded the wrong files and buggered up your kernel
Click to expand...
Click to collapse
Just usual CyanogenMod checkout from jellybean branch, breakfast lotus, extract-files.sh with phone connected, get-prebuilts, adding one local repo for overlay and brunch lotus. I can't see many chances to get wrong files from anywhere.
@carpediemcc
Can you enter flash or fastboot mode?
Can you not hold vol+ and power till it vibrates 3 times if u have a red led when plugged in your phone is charging . If you have get 3 vibrations after holding buttons down please trymy previous post . If you think the battery's dead when u try to turn it on does the led blink
please try I work In the UK's biggest repairs center I deal with phones ALOT
Sent from my Xperia Go using xda app-developers app
nosmaster said:
Can you not hold vol+ and power till it vibrates 3 times if u have a red led when plugged in your phone is charging . If you have get 3 vibrations after holding buttons down please trymy previous post . If you think the battery's dead when u try to turn it on does the led blink
Click to expand...
Click to collapse
No. I doesn't vibrate at all if I hold vol+ and power, or just try to turn it on, no matter how long I do it etc. The red LED turns on when I plug the phone into charger, but for 10 minutes only, then it turns off. And red LED doesn't blink when I try to turn phone on. I left phone connected to the charger for 24h and it didn't improve the situation any way.
HOw long do u hold power for I had this problem with my go after installing kumquat by accident i have one of those aswell lol no power led nothing.
Are yo able to plug you phone in to PC and enter flash for fastboot?
Sent from my Xperia Go using xda app-developers app
nosmaster said:
HOw long do u hold power for
Click to expand...
Click to collapse
Probably haven't tried it more than 30 seconds, but it should be for long enough.
nosmaster said:
Are yo able to plug you phone in to PC and enter flash for fastboot?
Click to expand...
Click to collapse
Nope.
OK, managed to restore my Go. Just as I guessed - the battery was drained and because of bad software (still don't know how it could happen) it wasn't really able to enter into charging mode. I managed to get an another Go and used the battery from this one temporarily (there is no need to really remove batteries from devices if you are careful) to reflash my Go. After that my Go began to charge its' battery again as well. Happy end.

My Z2 just died. HELP.

So I've been using my phone as per normal, and it suddenly switches itself off and wont turn on.
If I plug it in to charge (the batter was at 40%) I just get a blinking RED LED.
Any help / ideas guys?!
Try to press volume up and power in the same time. If it vibrates 3 times it should start normally...
Sent from my D6503 using Tapatalk
Fenix said:
Try to press volume up and power in the same time. If it vibrates 3 times it should start normally...
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Hi Fenix
Have tried that with and without a charging lead connected and no joy. The red LED just continues to blink.
Have also tried, again with and without charge, to press the red button next the sim card slot and no luck.
How about volume down and power?
Sent from my D6503 using Tapatalk
Fenix said:
How about volume down and power?
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Same result.
Planning to leave the phone OFF charge all night and see if that helps, and then maybe do the opposite and keep it ON charge for a few hours maybe.
Any other advice?
Have you tried a system reset
(you can use sony PC companion to do this)
(repair device)
I have this same problem.
I have reset and re installed the rom via pc companion and same problem.
Basically the phone will not charge via the magnetic connector at all.
if you switch off the phone it will not stay off, it keeps turning its self back on again and boot looping: displaying the sony logo, then off, then sony logo again.
If you hold the power button down for 20 seconds whilst on a Sony logo, the phone boots to the experia logo and boots normally.
Problem is the phone will NOT switch off and half the time it wont come back on. Its basically a lottery on whether the phone will come back at all.
Update - managed to get the phone switched on after leaving it on charge all night. Had to hold the power button down for 30 secs to get to my home screen as otherwise it was just looping to the Sony logo.
However, now, the phone is not charging - it detects that a charger is connected but the battery level is not going up and the LED is constant orange.
What to do?
I would flash a.2.69 firmware if you don't have it already.
Sent from my D6503 using Tapatalk
Fenix said:
I would flash a.2.69 firmware if you don't have it already.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
I'm a newb with these things - is there link for how to flash?
Not sure if it makes a difference but this phone is from Vodafone and I believe they've locked the bootloader or something similar?
Also noticed that the phone 'thinks' its still charging even without a charger connected - and the orange LED is constant.
Looks like the battery is kabooshed?
I think u should give the phone in for warranty.
Sent From My Nexus 5 Stock 4.4.2
paras said:
I think u should give the phone in for warranty.
Sent From My Nexus 5 Stock 4.4.2
Click to expand...
Click to collapse
This!!!
Seriously, it's well within swap out time let alone repair. Get it swapped.
Sent from my D6503 using Tapatalk
corallus said:
This!!!
Seriously, it's well within swap out time let alone repair. Get it swapped.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
True there is no reason to mess with the phone coz i u might trigger sine warranties issues.
Sent From My Nexus 5 Stock 4.4.2
I've just been to the O2 store and they said bring it back with the receipt and they will swap it over for a new one.
When
dutchtrance said:
I've just been to the O2 store and they said bring it back with the receipt and they will swap it over for a new one.
When
Click to expand...
Click to collapse
That's great
Sent From My Nexus 5 Stock 4.4.2
Adding to the above.
Received my Z2 on O2 onFriday 2nd, Tried charging it this morning and red charging light was on then started flashing.
That was trying to charge via a usb cable to the magnetic contact.
Re tried using standard usb cable.
Will not start regardless of what I do, on button, on + volume up, on + volume down.
Trip to O2 after work tonight to take it back.
May be a problem with the magnetic charging system, somehow shorting something out, for me anyway.
Same here, Need to return it to T-Mobile.
Same issue,
Went Off, never to be able to turn the phone on again.
When connected to the Charger, the red light blinks faster.
When connected to USB red blinking led, blinks slower.
Does not go 'On' anymore.
Recovery from pc compannion does not work.
The Update tool send by the sony technical suppport also did not recognise the device.
Windows does not recognise it.
Volume Up + power does not work
Volume Down + Power does not work
Volume Up of Down (phone turned off) connecting with USB does not work.
Red button next to the sim card does not reset the phone.
It is a Brick now, hope sony is good and replaces it with a NEW one.
I need help .. i was normally use my sony z2 d6503 and it turn off itself and i cant open it even if i put it charge only red led no logo no charging logo .. all black ..

[Q] Xperia Z ultra

My Xperia z ultra cannot turn on, turn off, not charge.
When charging the led is on off on off.
Dont know what a problem i try to turn off all way but cannot.
Anyone here can help please?
Kenjijo said:
My Xperia z ultra cannot turn on, turn off, not charge.
When charging the led is on off on off.
Dont know what a problem i try to turn off all way but cannot.
Anyone here can help please?
Click to expand...
Click to collapse
Sounds like it could be a corrupt bootloader?
Things to try
Press the red 'off' button beside the sim card, then charge in a A/C charger for several hours, then see if it will power on
Do the above but dont power on. hold down the volume down button while connection to a PC
Do the above but press the 'red off button' while holding the vol - button while connected to the PC
These last two we want the LED to turn blue for 1/2 a sec then go out (Flash Mode)
blueether said:
Sounds like it could be a corrupt bootloader?
Things to try
Press the red 'off' button beside the sim card, then charge in a A/C charger for several hours, then see if it will power on
Do the above but dont power on. hold down the volume down button while connection to a PC
Do the above but press the 'red off button' while holding the vol - button while connected to the PC
These last two we want the LED to turn blue for 1/2 a sec then go out (Flash Mode)
Click to expand...
Click to collapse
Thanks for your comment.
I'll try it.
Still nothing happen.
Now when i charging the led is blinking.
Don't know what is the problem.
Kenjijo said:
Still nothing happen.
Now when i charging the led is blinking.
Don't know what is the problem.
Click to expand...
Click to collapse
Maybe try to repair your phone via SEUS.
maxld said:
Maybe try to repair your phone via SEUS.
Click to expand...
Click to collapse
USB cannot recognized.
So what i gonna do?
The only times I've seen a blinking red LED (with and without a cable plugged in), is when there are issues with the bootloader. I've accidentally locked my bootloader while being on a custom kernel a couple of times, and I've gotten this exact behavior.
What was the last thing you did with your Ultra?
Sent from my C6833_GPe using Tapatalk
LordManhattan said:
The only times I've seen a blinking red LED (with and without a cable plugged in), is when there are issues with the bootloader. I've accidentally locked my bootloader while being on a custom kernel a couple of times, and I've gotten this exact behavior.
What was the last thing you did with your Ultra?
Sent from my C6833_GPe using Tapatalk
Click to expand...
Click to collapse
I didn't do anything. My phone no root and locked bootloader. And now the led is continuous (red led, yellow blinking) when i'm charging. cannot do anything with it.
Sorry my English not good.
I would go to a service center, if i were you.
Yeah, I would probably send it in for repairs too since I can't really tell what's going on.
Yeah i already send it to service center

Categories

Resources